Physico-chemical properties of nanocrystalline apatites: Implications for biominerals and biomaterials

Control of Biological Surface States on Chlorine-Doped Amorphous Silica Particles and Their Effective Absorptive Ability for Antibody Protein

Amorphous silica particles (ASPs) have low biotoxicity and are used in foodstuffs; however, the adsorption states of proteins on their surfaces have not yet been clarified. If the adsorption states can be clarified and controlled, then a wide range of biological and medical applications can be expected. The conventional amorphous silica particles have the problem of protein adsorption due to the strong interaction with their dense silanol groups and denaturation. In this study, the surfaces of amorphous silica particles with a lower silanol group density were modified with a small amount of chlorine during the synthesis process to form a specific surface layer by adsorbing water molecules and ions in the biological fluid, thereby controlling the protein adsorption state. Specifically, the hydration state on the surface of the amorphous silica particles containing trace amounts of chlorine was evaluated, and the surface layer (especially the hydration state) for the adsorption of antibody proteins while maintaining their steric structures was evaluated and discussed. The results showed that the inclusion of trace amounts of chlorine increased the silanol groups and Si-Cl bonds in the topmost surface layer of the particles, thereby inducing the adsorption of ions and water molecules in the biological fluid. Then, it was found that a novel surface layer was formed by the effective adsorption of Na and phosphate ions, which would change the proportion of the components in the hydration layer. In particular, the proportion of the free water component increased by 21% with the doping of chlorine. Antibody proteins were effectively adsorbed on the particles doped with trace amounts of chlorine, and their steric adsorption states were evaluated. It was found that the proteins were clearly adsorbed and maintained the steric state of their secondary structure. In the immunoreactivity tests using streptavidin and biotin, biotin bound to the chlorine-doped particles showed efficient reactivity. In conclusion, this study is the first to discover the surface layer of the amorphous silica particles to maintain the steric structures of adsorbed proteins, which is expected to be used as a carrier particle for antibody test kits and immunochromatography.

Modified Titanium Surface with Nano Amorphous Calcium Phosphate@Chitosan Oligolactate as Ion Loading Platform with Multifunctional Properties for Potential Biomedical Application

Titanium (Ti) is widely used in medical and dental implants. Calcium phosphate (CPs) coatings enhance Ti implants' osteoinductive properties, and additives further improve these coatings. Recently, a nano amorphous calcium phosphate (nACP) coating decorated with chitosan oligolactate (ChOL) and selenium (Se) showed immunomodulatory effects. This study investigates the surface morphology, composition, bioactivity, mechanical properties, and Se-release mechanism of the nACP@ChOL-Se hybrid coating on Ti substrates. Amorphous calcium phosphate (ACP) was synthesized, and the nACP@ChOL-Se hybrid coating was deposited on Ti substrates using in situ anaphoretic deposition. Physico-chemical characterization was used to analyze the surface of the coating (scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier Transform Infrared Spectroscopy). The distribution of Se within the coating was examined with energy-dispersive X-ray spectroscopy (EDS). Bioactivity was evaluated in simulated body fluid (SBF), and adhesion was tested using a scratch test method. In vitro testing determined the release mechanism of Se. SEM images illustrated the surface morphology, while AFM provided a detailed analysis of surface roughness. XRD analysis revealed structural and phase composition, and EDS confirmed Se distribution within the coating. The coating exhibited bioactivity in SBF and showed good adhesion according to the scratch test. In vitro testing uncovered the release mechanism of Se from the coating. This study successfully characterized the surface morphology, composition, bioactivity, and Se-release mechanism of the nACP@ChOL-Se hybrid coating on Ti substrates, offering insights for developing immunomodulatory coatings for medical and dental applications.

Recognition of the Presence of Bone Fractures Through Physicochemical Changes in Diagenetic Bone

Much research has focused on attempting to understand the drivers of bone diagenesis. However, this sensitive process is easily influenced by various factors, particularly the condition of the remains (i.e., whether they have been subjected to trauma). Previous research demonstrates that trauma can influence soft tissue decomposition, yet to date, no studies have looked at how bone fractures could affect bone diagenesis. To address this gap, two short timescale studies were conducted to investigate the influence of bone fractures on the physicochemical composition of disarticulated, partially fleshed animal remains. Disarticulated porcine bones were either fractured using blunt force or sharp force whilst fresh (producing perimortem damage), at 60 days producing postmortem damage (postmortem interval (PMI)), or left intact and left outside for up to 180 days post-fracture/240 days PMI. Retrieved bone sections were then analyzed for physicochemical differences using non-destructive methods, i.e., scanning electron microscopy energy dispersive spectroscopy and Fourier transform infrared spectroscopy with attenuated total reflectance. It was hypothesized that differences would be found in the physicochemical composition between the bones with fractures and those without after undergoing diagenetic change. The bone fractures significantly affected the elemental composition of bone over time, but structural composition initially remained stable. It was also possible to distinguish between perimortem and postmortem fractures using these two analytical techniques due to physicochemical differences. This research shows bone fractures can significantly alter the physicochemical composition of the bone during the postmortem period and have the potential to facilitate more accurate PMI estimations in forensic contexts.

An innovative approach in titanium determination based on incorporating 2-amino-4-((4-nitrophenyl)diazenyl)pyridine-3-ol in a PVC membrane

A pioneering optical sensor has been effectively developed to achieve precise and reliable detection of titanium ions. The sensor employs an optode membrane composed of 2-amino-4-((4-nitrophenyl)diazenyl)pyridine-3-ol (ANPDP) and sodium tetraphenylborate (NaTPB) incorporated into a plasticized PVC matrix, with dioctyl sebacate (DOS) acting as the plasticizer. When exposed to Ti4+ ions at pH 8.25, the color of the sensing membrane undergoes a distinctive transformation from yellow-orange to violet. Extensive investigations were carried out to assess and optimize various factors influencing the efficiency of ion uptake. Through careful experimentation, the optimum conditions were determined to be 60.0% DOS, 6.0% ANPDP, 30% PVC, and 4.0% NaTPB, with a rapid response time of 5.0 min. Within these conditions, the developed optode demonstrates an impressive linear range of 3.0-225 ng mL-1, boasting detection (LOD) and quantification (LOQ) limits of 0.91 and 2.95 ng mL-1, respectively. Moreover, the precision of the sensor, as indicated by the relative standard deviation (RSD%), remained consistently below 1.55% in six replicate determinations of 100 ng mL-1 Ti4+ across diverse membranes. The selectivity of the sensor was rigorously examined for a range of cations and anions, successfully establishing the tolerance limits for interfering species. Notably, the presence of EDTA as a masking agent did not compromise the high selectivity of the sensor. Consequently, the innovative probe holds significant potential as a reliable analytical tool for quantifying titanium content in various samples, including water, geological materials, soil, plants, paints, cosmetics, and plastics.

Tri-Component Hydrogel as Template for Nanocrystalline Hydroxyapatite Deposition Using Alternate Soaking Method for Bone Tissue Engineering Applications

Composite hydrogels containing apatite-like particles can act as scaffolds for osteoblast proliferation, with applications in bone tissue engineering. In this respect, porous biocompatible hydrogels were obtained from chitosan, oxidized pullulan, and PVA in different ratios. The stability of the hydrogels was ensured both by covalent bonds between aldehyde groups of oxidized pullulan and free amino groups of chitosan, and by physical bonds formed during freeze-thaw cycles and lyophilization. The deposition of calcium phosphates was performed by alternate soaking of the porous hydrogels into solutions with calcium and phosphate ions, assuring a basic pH required for hydroxyapatite formation. The mineralized hydrogels were characterized using FTIR spectroscopy, scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis, showing that inorganic particles containing between 80 and 92% hydroxyapatite were deposited in a high amount on the pore walls of the polymeric matrix. The composition of the organic matrix influenced the crystallization of calcium phosphates and the mechanical properties of the composite hydrogels. In vitro biological tests showed that mineralized hydrogels support the proliferation of MG-63 osteoblast-like cells to a greater extent compared to pristine hydrogels.

Investigation of Surface Layers on Biological and Synthetic Hydroxyapatites Based on Bone Mineralization Process

In this review, the current status of the influence of added ions (i.e., SiO₄^4-, CO₃^2-, etc.) and surface states (i.e., hydrated and non-apatite layers) on the biocompatibility nature of hydroxyapatite (HA, Ca₁₀(PO₄)₆(OH)₂) is discussed. It is well known that HA is a type of calcium phosphate with high biocompatibility that is present in biological hard tissues such as bones and enamel. This biomedical material has been extensively studied due to its osteogenic properties. The chemical composition and crystalline structure of HA change depending on the synthetic method and the addition of other ions, thereby affecting the surface properties related to biocompatibility. This review illustrates the structural and surface properties of HA substituted with ions such as silicate, carbonate, and other elemental ions. The importance of the surface characteristics of HA and its components, the hydration layers, and the non-apatite layers for the effective control of biomedical function, as well as their relationship at the interface to improve biocompatibility, has been highlighted. Since the interfacial properties will affect protein adsorption and cell adhesion, the analysis of their properties may provide ideas for effective bone formation and regeneration mechanisms.

Engineered nanostructures within sol-gel bioactive glass for enhanced bioactivity and modulated drug delivery

The engineering of nanocrystalline phase in amorphous oxide materials such as bioactive glass is emerging as a new area of great technological and scientific interest in the field of biomaterials. This study reports for the first time the infusion of apatite nanocrystals in sol-gel-derived bioactive glass using P123 as the structure-directing agent. The synthesis of a multicomponent 80SiO₂-15CaO-5P₂O₅ bioactive glass material having a hierarchically ordered mesoporous structure with uniformly grown nanocrystals of apatite was achieved through a sono-assisted surfactant-templated sol-gel method. The bulk crystallographic analysis together with microstructural characterizations shows that the nanocrystalline apatite domains are uniformly dispersed as well as embedded along the mesopores. These nanocrystalline domains were found to influence the textural properties. In addition, macroscopic evidence for higher signs of bonelike matrix formation was observed by the biomineralization study in simulated body fluids. Osteostimulatory effects of these glass samples were evident by cultures in a osteogenic and non-osteogenic mediums with human osteosarcoma cells and a higher osteopromotive potential was authenticated by the alkaline phosphatase activity and alizarin red staining. Further, this study shows a new strategy to prolong the drug release period on account of the nanocrystalline phase and hierarchically positioned mesopores, thus making it a better drug delivery matrix as well.

Nuclear Magnetic Resonance and Metadynamics Simulations Reveal the Atomistic Binding of l-Serine and O-Phospho-l-Serine at Disordered Calcium Phosphate Surfaces of Biocements

Interactions between biomolecules and structurally disordered calcium phosphate (CaP) surfaces are crucial for the regulation of bone mineralization by noncollagenous proteins, the organization of complexes of casein and amorphous calcium phosphate (ACP) in milk, as well as for structure-function relationships of hybrid organic/inorganic interfaces in biomaterials. By a combination of advanced solid-state NMR experiments and metadynamics simulations, we examine the detailed binding of O-phospho-l-serine (Pser) and l-serine (Ser) with ACP in bone-adhesive CaP cements, whose capacity of gluing fractured bone together stems from the close integration of the organic molecules with ACP over a subnanometer scale. The proximity of each carboxy, aliphatic, and amino group of Pser/Ser to the Ca²⁺ and phosphate species of ACP observed from the metadynamics-derived models agreed well with results from heteronuclear solid-state NMR experiments that are sensitive to the ¹³C-³¹P and ¹⁵N-³¹P distances. The inorganic/organic contacts in Pser-doped cements are also contrasted with experimental and modeled data on the Pser binding at nanocrystalline HA particles grown from a Pser-bearing aqueous solution. The molecular adsorption is driven mainly by electrostatic interactions between the negatively charged carboxy/phosphate groups and Ca²⁺ cations of ACP, along with H bonds to either protonated or nonprotonated inorganic phosphate groups. The Pser and Ser molecules anchor at their phosphate/amino and carboxy/amino moieties, respectively, leading to an extended molecular conformation across the surface, as opposed to an "upright standing" molecule that would result from the binding of one sole functional group.

Implementation of bactericidal topographies on biomimetic calcium phosphates and the potential effect of its reactivity

Since the discovery that nanostructured surfaces were able to kill bacteria, many works have been published focusing on the design of nanopatterned surfaces with antimicrobial properties. Synthetic bone grafts, based on calcium phosphate (CaP) formulations, can greatly benefit from this discovery if adequate nanotopographies can be developed. However, CaP are reactive materials and experience ionic exchanges when placed into aqueous solutions which may in turn affect cell behaviour and complicate the interpretation of the bactericidal results. The present study explores the bactericidal potential of two nanopillared CaP prepared by hydrolysis of two different sizes of α-tricalcium phosphate (α-TCP) powders under biomimetic or hydrothermal conditions. A more lethal bactericidal response toward Pseudomonas aeruginosa (~75% killing efficiency of adhered bacteria) was obtained from the hydrothermally treated CaP which consisted in a more irregular topography in terms of pillar size (radius: 20-60 nm), interpillar distances (100-1500 nm) and pillar distribution (pillar groups forming bouquets) than the biomimetically treated one (radius: 20-40 nm and interpillar distances: 50-200 nm with a homogeneous pillar distribution). The material reactivity was greatly influenced by the type of medium (nutrient-rich versus nutrient-free) and the presence or not of bacteria. A lower reactivity and superior bacterial attachment were observed in the nutrient-free medium while a lower attachment was observed for the nutrient rich medium which was explained by a superior reactivity of the material paired with the lower tendency of planktonic bacteria to adhere on surfaces in the presence of nutrients. Importantly, the ionic exchanges produced by the presence of materials were not toxic to planktonic cells. Thus, we can conclude that topography was the main contributor to mortality in the bacterial adhesion tests.

Composites Containing Nanohydroxyapatites and a Stable TEMPO Radical: Preparation and Characterization Using Spectrophotometry, EPR and 1H MAS NMR

Hydroxyapatite is the main constituent of mammalian hard tissues. Basic applications of synthetic hydroxyapatites include bone and dental implantology and drug delivery systems. The study of hydroxyapatite surface properties could give greater insight into the processes of bone mineralization and degradation. Nitroxide radicals are stable radicals that exhibit anticancer and antioxidative properties and are often used as spin probes to study the dynamics of complex biological systems. In this work, we attempted to adsorb the stable 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) on two hydroxyapatites (HAs) differing in specific surface area and the degree of hydration. The adsorption was carried out from cyclohexane, 1-chlorobutane and water. The solutions after adsorption were studied spectrophotometrically, while the obtained composites were characterized via NMR and EPR spectroscopy. The results show that it is possible to reproducibly obtain fairly stable composites, where the main factors influencing the adsorbed amount of the radical are solvent polarity and specific surface area of hydroxyapatite. The Langmuir isotherm was determined to be the most suitable adsorption model. The analysis of EPR and NMR spectra allowed us to determine the distribution of the TEMPO molecules on the hydroxyapatite surface, as well as a probable adsorption mechanism. The HA/TEMPO composites could potentially be used to study certain properties of hydroxyapatite surfaces with EPR spectroscopy. They could also be used as fillers after hard tissue surgery, as well as metal-free MRI contrasts.

Coordination Effect of Citric Acid to Ca-deficient Hydroxyapatite on the Phase Transition

The phase transition of Ca-deficient hydroxyapatite (CDHA) with citric acid (Cit) coordination was investigated. The Cit promoted the substitution of the K+ ion in CDHA to generate the HA phase....

Maturation of biomimetic hydroxyapatite in physiological fluids: a physicochemical and proteomic study

Biomimetic calcium-deficient hydroxyapatite (CDHA) as a bioactive material exhibits exceptional intrinsic osteoinductive and osteogenic properties because of its nanostructure and composition, which promote a favorable microenvironment. Its high reactivity has been hypothesized to play a relevant role in the in vivo performance, mediated by the interaction with the biological fluids, which is amplified by its high specific surface area. Paradoxically, this high reactivity is also behind the in vitro cytotoxicity of this material, especially pronounced in static conditions. The present work explores the structural and physicochemical changes that CDHA undergoes in contact with physiological fluids and to investigate its interaction with proteins. Calcium-deficient hydroxyapatite discs with different micro/nanostructures, coarse (C) and fine (F), were exposed to cell-free complete culture medium over extended periods of time: 1, 7, 14, 21, 28, and 50 days. Precipitate formation was not observed in any of the materials in contact with the physiological fluid, which would indicate that the ionic exchanges were linked to incorporation into the crystal structure of CDHA or in the hydrated layer. In fact, CDHA experienced a maturation process, with a progressive increase in crystallinity and the Ca/P ratio, accompanied by an uptake of Mg and a B-type carbonation process, with a gradual propagation into the core of the samples. However, the reactivity of biomimetic hydroxyapatite was highly dependent on the specific surface area and was amplified in nanosized needle-like crystal structures (F), whereas in coarse specimens the ionic exchanges were restricted to the surface, with low penetration in the material bulk. In addition to showing a higher protein adsorption on F substrates, the proteomics study revealed the existence of protein selectivity toward F or C microstructures, as well as the capability of CDHA, and more remarkably of F-CDHA, to concentrate specific proteins from the culture medium. Finally, a substantial improvement in the material's ability to support cell proliferation was observed after the CDHA maturation process.

The effect of chemical structure of carboxylate molecules on hydroxyapatite nanoparticles. A structural and morphological study

Being the most abundant non-macromolecular organic component of bone, the role of citrate (Cit) in hydroxyapatite (HA) crystallization is of high relevance. In this work we have investigated the influence of hydroxycitrate (CitOH) and glutarate (Glr) on HA crystallization in terms of particle growth, composition, and morphology in comparison to Cit. CitOH and Glr have been selected for this work because they share the same backbone structure of Cit but bear different functional groups in the central region. Our data has revealed that CitOH strongly inhibits HA crystallization more efficiently than Cit. CitOH-HA nanoparticles are composed of platy, elongated particles similar to those of Cit-HA but they are ca. twice smaller and have a lower crystal order. On the other hand, Glr does not inhibit HA crystallization as Cit, but leads to the formation of OCP platelets that convert with maturation time to HA nanorods with larger aspect ratio than Cit-HA. In comparison to Cit-HA samples, Glr-HA nanoparticles have bigger dimensions, and higher structural order. Overall, our data reveal that the central carboxyl group of Cit is involved in the selective binding with HA crystal surface and in regulating HA crystal growth. The results of this work highlight new possibilities to control the formation of HA for designing advanced bioactive materials and give new insights on the role of the structure of Cit in regulating the HA morphology.

Micro-/Nano-Structured Ceramic Scaffolds That Mimic Natural Cancellous Bone

Micro-/nano-structured scaffolds with a weight composition of 46.6% α-tricalcium phosphate (α-TCP)-53.4% silicocarnotite (SC) were synthesized by the polymer replica method. The scanning electron microscopy (SEM) analysis of the scaffolds and natural cancellous bone was performed for comparison purposes. Scaffolds were obtained at three cooling rates via the eutectoid temperature (50 °C/h, 16.5 °C/h, 5.5 °C/h), which allowed the surface nanostructure and mechanical strength to be controlled. Surface nanostructures were characterized by transmission electron microscopy (TEM) and Raman analysis. Both phases α-TCP and SC present in the scaffolds were well-identified, looked compact and dense, and had neither porosities nor cracks. The non-cytotoxic effect was evaluated in vitro by the proliferation ability of adult human mesenchymal stem cells (ah-MSCs) seeded on scaffold surfaces. There was no evidence for cytotoxicity and the number of cells increased with culture time. A dense cell-hydroxyapatite layer formed until 28 days. The SEM analysis suggested cell-mediated extracellular matrix formation. Finally, scaffolds were functionalized with the alkaline phosphatase enzyme (ALP) to achieve biological functionalization. The ALP was successfully grafted onto scaffolds, whose enzymatic activity was maintained. Scaffolds mimicked the micro-/nano-structure and chemical composition of natural cancellous bone by considering cell biology and biomolecule functionalization.

A Simple Cerium Coating Strategy for Titanium Oxide Nano-tubes' Bioactivity Enhancement

Despite the well-known favorable chemical and mechanical properties of titanium-based materials for orthopedic and dental applications, poor osseointegration of the implants, bacteria adhesion, and excessive inflammatory response from the host remain major problems to be solved. Here, the antioxidant and anti-inflammatory enzyme-like abilities of ceria (CeO_x) were coupled to the advantageous features of titanium nanotubes (TiNTs). Cost-effective and fast methods, such as electrochemical anodization and drop casting, were used to build active surfaces with enhanced bioactivity. Surface composition, electrochemical response, and in vitro ability to induce hydroxyapatite (HA) precipitation were evaluated. The amount of cerium in the coating did not significantly affect wettability, yet a growing ability to induce early HA precipitation from simulated body fluid (SBF) was observed as the oxide content at the surface increased. The presence of 4%wt CeO_x was also able to stimulate rapid HA maturation in a (poorly) crystalline form, indicating an interesting potential to induce rapid in vivo osseointegration process.

Characterization and In Vitro Evaluations of Injectable Calcium Phosphate Cement Doped with Magnesium and Strontium

Injectable calcium phosphate cement is a promising biomaterial for hard tissue repair due to its osteoinductivity, biocompatibility properties, and its use to correct defect areas involving narrow cavities with limited accessibility by the minimally invasive technique. Microwave-synthesized hydroxyapatite (HA) was used for the preparation of cement. In recent years, both magnesium and strontium calcium phosphate cements have exhibited rapid setting, improved mechanical strength, and a good resorption rate. A big step still remains to develop injectable magnesium and strontium phosphate cements with ideal self-setting properties, adequate mechanical strength, and good biocompatibility for clinical applications. In this study, both magnesium and strontium were doped with synthesized semiamorphous and crystalline hydroxyapatite (HA). The powder mixture was mixed with Na₂HPO₄, NaH₂PO₄, and a carboxymethyl cellulose (CMC) solution to develop the novel magnesium and strontium calcium phosphate cement. The setting time, physiochemical properties of hardened cement, microstructure, mechanical strength, and injectability of the prepared cement were studied. The toxicity evaluation and cell adhesion, which are necessary to identify the suitability of the material for different applications, were quantified and investigated using fibroblast cells. The setting time of cement was reduced substantially for magnesium- or strontium-doped cement by 2 min. The phase composition of the hardened cement expresses the semiamorphous or crystalline phase of HA with additives. Smooth and complete injection of cement paste was observed in semiamorphous HA-based cement. The intercellular reactive oxygen stress (ROS) of the Sr²⁺-doped cement sample showed varied degrees of toxicity to cells in terms of different concentrations. The Mg²⁺-doped cement showed significant attachment of cells after treatment at varying incubation times.

On the amorphous layer in bone mineral and biomimetic apatite: A combined small- and wide-angle X-ray scattering analysis

The occurrence of an amorphous calcium phosphate layer covering the crystalline apatite core has been suggested to be an intrinsic feature of both bone mineral and synthetic biomimetic analogs. However, an exahustive quantitative picture of the amorphous-crystalline relationship in these materials is still missing. Here, we present a multiple scale modelling that combines small-angle X-ray scattering (SAXS) and synchrotron wide-angle X-ray total scattering (WAXTS) analyses to investigate the amorphous-crystalline spatial interplay in bone sample and biomimetic carbonated nano-apatites. SAXS analysis indicates the presence of a single morphology consisting of tiny nanoplates (NPLs) and provides a measure of their thickness (falling in the 3-5 nm range). WAXTS analysis was performed by developing atomistic models of apatite NPLs incorporating lattice strain, mostly attributed to the carbonate content, and calculating the X-ray patterns using the Debye Scattering Equation. Upon model optimization, the size and strain parameters of the crystalline platelets were derived and the amorphous component, co-existing with the crystalline one, separated and quantified (in the 23-33 wt% range). Notably, the thickness of the apatite core was found to exhibit nearly null (bone) or minor (< 0.5 nm, biomimetic samples) deviations from that of the entire NPLs, suggesting that the amorphous material remains predominantly distributed along the lateral sides of the NPLs, in a core-crown-like arrangement. The lattice strain analysis indicates a significant stiffness along the c axis, which is comparable in bone and synthetic samples, and larger deformations in the other directions. STATEMENT OF SIGNIFICANCE: Current models of bone mineral and biomimetic nanoapatites suggest the occurrence of an amorphous layer covering the apatitic crystalline nanoplates in a core-shell arrangement. By combining X-ray scattering techniques in the small and wide angle regions, we propose a joint atomic-to-nanometre scale modelling to investigate the amorphous-crystalline interplay within the nanoplates. Estimates are extracted for the thickness of the entire nanoplates and the crystalline core, together with the quantification of the amorphous fraction and apatite lattice strain. Based on the thickness matching, the location of the amorphous material mostly along the edges of the nanoplates is inferred, with a vanishing or very thin layer in the thickness direction, suggesting a core-crown-like arrangement, with possible implications on the mineral surface reactivity.

Strontium incorporation into biomimetic carbonated calcium-deficient hydroxyapatite coated carbon cloth: Biocompatibility with human primary osteoblasts

It has already been shown that sono-electrodeposition can be used to coat activated carbon fiber cloth (ACC) with calcium phosphates (CaP) and we recently demonstrated that cathodic polarization at -1 V/Hg/Hg₂SO₄ was the best parameter to obtain a carbonated calcium deficient hydroxyapatite (CDA) coating with optimal uniformity and homogeneity. In the present study, we investigated whether this technique was suitable to dope this carbonated CDA coating by partial substitution with another bivalent cation such as strontium. We show here that a strontium-substituted carbonated CDA coating can be produced and quantitatively controlled up to at least 10 at.%. In this range we demonstrate that the presence of strontium does not modify either the textural or the structural properties of the carbonated CDA. Owing to the well-known effect of both carbonated CDA and strontium in bone formation, the biocompatibility of ACC coated or not with carbonated CDA or with strontium substituted carbonated CDA was tested using primary human osteoblasts. Our data revealed a positive and dose-dependent effect of strontium addition on osteoblast activity and proliferation. In conclusion, we show here that electrodeposition at -1 V is a suitable and easy process to incorporate cations of biological interest into CaP coating.

Wettability and pre-osteoblastic behavior evaluations of a dense bovine hydroxyapatite ceramics

In this study, the wettability, cell viability, and roughness of an experimental dense bovine hydroxyapatite [Ca₁₀(PO₄)₆(OH)₂] ceramic block were evaluated so that, in the future, it could be used as a base material for dental implants. The results to commercial zirconia and a commercially pure titanium (Ti) alloy were compared. The surface roughness and contact angles were measured. An in vitro evaluation was conducted by means of tests in which pre-osteoblastic MC3T3-E1 cells were placed in indirect and direct contact with these materials. For cell viability, a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay and crystal violet test were conducted. A qualitative analysis was conducted using variable pressure scanning electron microscopy (SEM). No statistically significant differences were observed in wettability and roughness tests among the groups. In both the MTT assay and crystal violet test, all groups demonstrated satisfactory results without cytotoxicity. SEM showed cell adhesion and cell proliferation results on the material surfaces after 24 h and 48 h. In conclusion, this dense Ca₁₀ (PO₄)₆(OH)₂ ceramic can be considered as a potential biocompatible material.

A soft-chemistry approach to the synthesis of amorphous calcium ortho/pyrophosphate biomaterials of tunable composition

The development of amorphous phosphate-based materials is of major interest in the field of biomaterials science, and especially for bone substitution applications. In this context, we herein report the synthesis of gel-derived hydrated amorphous calcium/sodium ortho/pyrophosphate materials at ambient temperature and in water. For the first time, such materials have been obtained in a large range of tunable orthophosphate/pyrophosphate molar ratios. Multi-scale characterization was carried out thanks to various techniques, including advanced multinuclear solid state NMR. It allowed the quantification of each ionic/molecular species leading to a general formula for these materials: [(Ca²⁺_y Na⁺_z H⁺_3+x-2y-z)(PO₄^3-)_1-x(P₂O₇^4-)_x](H₂O)_u. Beyond this formula, the analyses suggest that these amorphous solids are formed by the aggregation of colloids and that surface water and sodium could play a role in the cohesion of the whole material. Although the full comprehension of mechanisms of formation and structure is still to be investigated in detail, the straightforward synthesis of these new amorphous materials opens up many perspectives in the field of materials for bone substitution and regeneration. STATEMENT OF SIGNIFICANCE: The metastability of amorphous phosphate-based materials with various chain length often improves their (bio)chemical reactivity. However, the control of the ratio of the different phosphate entities has not been yet described especially for small ions (pyrophosphate/orthophosphate) and using soft chemistry, whereas it opens the way for the tuning of enzyme- and/or pH-driven degradation and biological properties. Our study focuses on elaboration of amorphous gel-derived hydrated calcium/sodium ortho/pyrophosphate solids at 70 °C with a large range of orthophosphate/pyrophosphate ratios. Multi-scale characterization was carried out using various techniques such as advanced multinuclear SSNMR (³¹P, ²³Na, ¹H, ⁴³Ca). Analyses suggest that these solids are formed by colloids aggregation and that the location of mobile water and sodium could play a role in the material cohesion.

Insights into OCP identification and quantification in the context of apatite biomineralization

Monitoring apatite formation throughin situRAMAN andex situssNMR spectroscopy.

The effect of biomimetic coating and cuttlebone microparticle reinforcement on the osteoconductive properties of cellulose-based scaffolds

Polymer-based scaffolds have already gained popularity in many biomedical applications due to convenient routes for fabrication and favourable structural, physicochemical and functional characteristics. However, polymeric scaffolds lack osteoconductivity and some synthetic polymers carry the risk of inflammatory response caused by degradation by-products. Those facts limit their practical use in bone tissue engineering. In this study, three-dimensional (3D) porous scaffolds from naturally derived polymer, namely regenerated cellulose, were prepared using a non-hydrolytic sol-gel and lyophilization techniques. To induce osteoconductive properties of the polymeric scaffolds, cuttlebone microparticles were immobilized and the surface coating was achieved via in vitro mineralization using 10-fold concentrated simulated body fluid (10x SBF). Biogenic activity of cuttlebone is explained by its chemical composition, which includes polysaccharide β-chitin and macro-, micro- and trace elements favourable for mineralization. Parallel the scaffolds were examined during long-term (24 weeks) in vitro mineralization in 1x SBF for the purpose to investigate apatite-forming ability of the scaffolds. A nice cauliflower-like structures and needle-like dents of the spherical aggregates, which are characteristic to hydroxyapatite precursors, were observed on the surface of cellulose/cuttlebone scaffolds by SEM. 10x SBF coating enhanced cell attachment to the scaffolds because SBF elements are known to increase bioactivity by inducing re-deposition of carbonate apatite crystallites on scaffold surface. Additionally, calcium and phosphate depositions were clearly observed on the developed scaffolds using von Kossa and Alizarin Red S staining. Proliferative and osteoconductive effects on the osteoblast-like MG-63 cells demonstrate the cellulose/cuttlebone scaffolds soaked in 10x SBF as a favourable material for bone tissue engineering.

Structural description of surfaces and interfaces in biominerals by DNP SENS

Biological mineralized tissues are hybrid materials with complex hierarchical architecture composed of biominerals often embedded in an organic matrix. The atomic-scale comprehension of surfaces and organo-mineral interfaces of these biominerals is of paramount importance to understand the ultrastructure, the formation mechanisms as well as the biological functions of the related biomineralized tissue. In this communication we demonstrate the capability of DNP SENS to reveal the fine atomic structure of biominerals, and more specifically their surfaces and interfaces. For this purpose, we studied two key examples belonging to the most significant biominerals family in nature: apatite in bone and aragonite in nacreous shell. As a result, we demonstrate that DNP SENS is a powerful approach for the study of intact biomineralized tissues. Signal enhancement factors are found to be up to 40 and 100, for the organic and the inorganic fractions, respectively, as soon as impregnation time with the radical solution is long enough (between 12 and 24 h) to allow an efficient radical penetration into the calcified tissues. Moreover, ions located at the biomineral surface are readily detected and identified through ³¹P or ¹³C HETCOR DNP SENS experiments. Noticeably, we show that protonated anions are preponderant at the biomineral surfaces in the form of HPO₄^2- for bone apatite and HCO₃^2- for nacreous aragonite. Finally, we demonstrate that organo-mineral interactions can be probed at the atomic level with high sensitivity. In particular, reliable ¹³C-{³¹P} REDOR experiments are achieved in a few hours, leading to the determination of distances, molar proportion and binding mode of citrate bonded to bone mineral in native compact bone. According to our results, only 80% of the total amount of citrate in bone is directly interacting with bone apatite through two out of three carboxylic groups.

Immobilization of radioactive corrosion products by cold sintering of pure hydroxyapatite

An efficient method for the consolidation of cobalt (Co(II)) adsorbed calcium hydroxyapatite was investigated to develop a simplified route for decontamination of the coolant system of nuclear power plants and direct immobilization of as-spent adsorbent. Calcium hydroxyapatite nano-powder synthesized by a wet precipitation method was used as an adsorbent and 94% Co(II) surrogate removal from simulated water was measured. The as-spent adsorbent was sintered at 200 °C, a temperature significantly lower than conventional sintering temperatures (900-1300 °C) for hydroxyapatite, under a uniaxial pressure of 500 MPa for 10 min. The relative density after the cold sintering was >97% and sintered samples displayed good compressive strength (175 MPa). The normalized leaching rate of the Co(II) was measured as per ASTM-C1285 standard and found to be 2.5 × 10^-5 g/m²/day. ANSI/ANS-16.1 test procedure was used to analyze the leachability of the sintered matrices and the measured leaching index value was 6.5. Thus, the use of pure calcium hydroxyapatite nano-powder as adsorbent and its cold sintering offers a mean by which radioactive waste form can be processed in an environment friendly manner.

Preparation of novel nano composite materials from biomass waste and their sorptive characteristics for certain radionuclides

The aim of this work is directed to prepare nanoparticles of egg shell hydroxyapatite-humic acid (ESHAP-HA) as a novel composite material. FTIR, EDX, TEM, XRD, and SEM identified it. Sorption characteristic studies on ESHAP-HA at different pH of solutions, shaking time, initial ion concentration and complexing agent were performed at 152,154Eu, 99Mo and 63Ni. The results were demonstrated that selectivity removal of 152,154Eu (~96 %) rather than 99Mo (8.5 %) and 63Ni (26.7 %). The sorption capacity of 152,154Eu(III), 63Ni(II) and 99Mo(VI) are 80.1, 12.5 and 2.3 mg/g, respectively, onto the ESHAP-HA nanoparticles. Application on the eclectic removal of 152,154Eu from mixed radionuclides (152,154Eu, 60Co, and 137Cs) solution has been evaluated. It concluded that the prepared ESHAP-HA composite material is a promising and recommended for separation of radio lanthanides and/or actinides (such as Am) from nuclear liquid waste and/or contaminated aquatic environmental.

Bone mineral: new insights into its chemical composition

Some compositional and structural features of mature bone mineral particles remain unclear. They have been described as calcium-deficient and hydroxyl-deficient carbonated hydroxyapatite particles in which a fraction of the PO₄^3- lattice sites are occupied by HPO₄^2- ions. The time has come to revise this description since it has now been proven that the surface of mature bone mineral particles is not in the form of hydroxyapatite but rather in the form of hydrated amorphous calcium phosphate. Using a combination of dedicated solid-state nuclear magnetic resonance techniques, the hydrogen-bearing species present in bone mineral and especially the HPO₄^2- ions were closely scrutinized. We show that these HPO₄^2- ions are concentrated at the surface of bone mineral particles in the so-called amorphous surface layer whose thickness was estimated here to be about 0.8 nm for a 4-nm thick particle. We also show that their molar proportion is much higher than previously estimated since they stand for about half of the overall amount of inorganic phosphate ions that compose bone mineral. As such, the mineral-mineral and mineral-biomolecule interfaces in bone tissue must be driven by metastable hydrated amorphous environments rich in HPO₄^2- ions rather than by stable crystalline environments of hydroxyapatite structure.

Toward an efficient antibacterial agent: Zn- and Mg-doped hydroxyapatite nanopowders

The use of synthetic hydroxyapatites (HAps) in biomedical and environmental applications is well warranted given that they have been shown to behave as an excellent bio-compatible material in human teeth and bones. In this paper, a series of HAps doped and co-doped with two metal cations (zinc and magnesium) has been successfully synthesized by means of the precipitation method using CaCl₂, Na₂HPO₄, ZnCl₂ and MgCl₂ aqueous solutions as reagents. The synthesized samples have been characterized using Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray fluorescence spectroscopy (XRF). All samples prepared using over 10 mol% of Zn and Mg ions were identified as HAp. However, the presence of metal cations caused a significant increase in their crystallite sizes (30-50 nm) along with the appearance of a second phase (scholzite, whitlockite). The XRF spectra indicated the presence of Ca, P, Zn and Mg in the powders prepared with a high Metal/P ratio (1.7-2). The antimicrobial activity of these nanopowders has been tested in vitro against five bacteria (Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa as Gram-negative; Staphylococcus aureus and Bacillus subtilis as Gram-positive) and two fungal strains (Candida albicans and Aspergillus niger). The outcomes revealed that these nanopowders exhibited strong antimicrobial activity, starting at 15 mol% of Zn and/or Mg.

Organization of Bone Mineral: The Role of Mineral–Water Interactions

The mechanism (s) that drive the organization of bone mineral throughout the bone extracellular matrix remain unclear. The long-standing theory implicates the organic matrix, namely specific non-collagenous proteins and/or collagen fibrils, while a recent theory proposes a self-assembly mechanism. Applying a combination of spectroscopic and microscopic techniques in wet and dry conditions to bone-like hydroxyapatite nanoparticles that were used as a proxy for bone mineral, we confirm that mature bone mineral particles have the capacity to self-assemble into organized structures. A large quantity of water is present at the surface of bone mineral due to the presence of a hydrophilic, amorphous surface layer that coats bone mineral nanoparticles. These water molecules must not only be strongly bound to the surface of bone mineral in the form of a rigid hydration shell, but they must also be trapped within the amorphous surface layer. Cohesive forces between these water molecules present at the mineral–mineral interface not only hold the mature bone mineral particles together, but also promote their oriented stacking. This intrinsic ability of mature bone mineral particles to organize themselves without recourse to the organic matrix forms the foundation for the development of the next generation of orthopedic biomaterials.

Monodisperse, colloidal and luminescent calcium fluoride nanoparticles via a citrate-assisted hydrothermal route

Luminescent calcium fluoride (CaF₂) nanoparticles, because of their excellent biocompatibility, excellent photostability and strong fluorescence, have received increasing attention as drug carriers and bioprobes in cell imaging. Inspired by the role of citrate in the growth of apatite crystals during natural bio-mineralization, uniform and nearly monodisperse Eu³⁺-doped CaF₂ nanoparticles with excellent colloidal stability and high fluorescence in aqueous media have been successfully synthesized in the presence of sodium citrate using a hydrothermal method. X-ray diffraction and transmission electron microscopy show that CaF₂ nanoparticles grown in the presence of sodium citrate are cubes of relatively uniform size (15 nm), and that the Eu³⁺ doping level has little effect on size and morphology. Zeta potentials and dynamic light scattering demonstrate that in the synthesis with sodium citrate, the colloidal stability of CaF₂ nanoparticles is greatly improved upon the increase of Eu³⁺ doping level. Moreover, aqueous dispersions of these nanoparticles are colloidally stable and can be maintained over a wide range of pH from 5.0 to 11.0 for more than a month. Fluorescence spectra demonstrate that the doped CaF₂ nanoparticles display strong red fluorescence. Fourier transform infrared spectra and thermogravimetric analyses demonstrate the adsorption of substantial quantities of sodium citrate on the surfaces of the CaF₂ nanoparticles. Taken together, such colloidal behavior should be related to strong crystal inhibition of citrate ions and Eu³⁺ doping induced promotion thermal-decomplexing between citrate ions and calcium ions. The luminescent CaF₂ nanoparticles obtained using this protocol should be promising candidates for use in many bio-related applications.

Insights into the kinetics of thermally induced crystallization of amorphous calcium phosphate

Transformations between amorphous and crystalline apatite mechanistically govern some of the most essential processes in bone metabolism, including biomineralization and bone remodeling. Fundamental understanding of this phase transition can help us gain control over the formation and dissolution of boney tissues in vivo and utilize that knowledge for various therapeutic ends. Crystallization of hydroxyapatite (HAp) and two tricalcium phosphate (TCP) polymorphs from the metastable precursor, amorphous calcium phosphate (ACP) was here studied kinetically and mechanistically using thermal analyses, X-ray diffraction and Fourier-transform infrared spectroscopy. Crystallization was detected in the differential thermal analysis as the exothermic peak at 639.5 °C at the slowest heating regimen of 5 °C min-1, while a combination of different kinetics models, including Augis-Bennett, Borchardt-Daniels, Johnson-Mehl-Avrami, Kissinger, Ozawa and Piloyan, yielded activation energies in the 435-450 kJ mol-1 range. Dehydrated ACP required a significant energy input to transform to HAp, thus indirectly proving the key role that structural water plays in this process in a biological setting. The phase transformation at high temperatures involved preformed nuclei and was solely due to their 3D growth, contrasting the edge-controlled nucleation derived earlier as the mechanism of growth in the solution. Crystallization was in both cases accompanied by the formation of needle-shape crystals of HAp through aggregation of ultrafine spherical units of ACP. Relationship between crystallinity and the heating rate was detected only for the initially amorphous structure, indicating a more intense and coherent lattice ordering process in annealed ACP than in HAp. Despite that, crystallization disobeyed the rule of inverse proportionality between the thermal energy required for the relaxation of defects and the level of strain, as the recovery rate of the initially poorly crystalline HAp was higher than that of ACP.