Development of poly(lactic acid) nanostructured membranes for the controlled delivery of progesterone to livestock animals

Biodegradable Polymers in Veterinary Medicine-A Review

During the past two decades, tremendous progress has been made in the development of biodegradable polymeric materials for various industrial applications, including human and veterinary medicine. They are promising alternatives to commonly used non-degradable polymers to combat the global plastic waste crisis. Among biodegradable polymers used, or potentially applicable to, veterinary medicine are natural polysaccharides, such as chitin, chitosan, and cellulose as well as various polyesters, including poly(ε-caprolactone), polylactic acid, poly(lactic-co-glycolic acid), and polyhydroxyalkanoates produced by bacteria. They can be used as implants, drug carriers, or biomaterials in tissue engineering and wound management. Their use in veterinary practice depends on their biocompatibility, inertness to living tissue, mechanical resistance, and sorption characteristics. They must be designed specifically to fit their purpose, whether it be: (1) facilitating new tissue growth and allowing for controlled interactions with living cells or cell-growth factors, (2) having mechanical properties that address functionality when applied as implants, or (3) having controlled degradability to deliver drugs to their targeted location when applied as drug-delivery vehicles. This paper aims to present recent developments in the research on biodegradable polymers in veterinary medicine and highlight the challenges and future perspectives in this area.

Advances in Biomedical Applications of Solution Blow Spinning

In recent years, Solution Blow Spinning (SBS) has emerged as a new technology for the production of polymeric, nanocomposite, and ceramic materials in the form of nano and microfibers, with similar features to those achieved by other procedures. The advantages of SBS over other spinning methods are the fast generation of fibers and the simplicity of the experimental setup that opens up the possibility of their on-site production. While producing a large number of nanofibers in a short time is a crucial factor in large-scale manufacturing, in situ generation, for example, in the form of sprayable, multifunctional dressings, capable of releasing embedded active agents on wounded tissue, or their use in operating rooms to prevent hemostasis during surgical interventions, open a wide range of possibilities. The interest in this spinning technology is evident from the growing number of patents issued and articles published over the last few years. Our focus in this review is on the biomedicine-oriented applications of SBS for the production of nanofibers based on the collection of the most relevant scientific papers published to date. Drug delivery, 3D culturing, regenerative medicine, and fabrication of biosensors are some of the areas in which SBS has been explored, most frequently at the proof-of-concept level. The promising results obtained demonstrate the potential of this technology in the biomedical and pharmaceutical fields.

PET-RAFT to expand the surface-modification chemistry of melt coextruded nanofibers

Polymeric nanofibers have been widely used as scaffolds for tissue engineering, drug delivery, and filtration applications, among many others. This work describes new methods to modify chemically-inert fibers using PET-RAFT.

Preparation of mango peel-waste pectin-based nanofibers by solution blow spinning (SBS)

An essential prerequisite for successful solution blow spinning (SBS) is the presence of effective molecular entanglements of polymers in the solution. However, the fabrication of biopolymer fibers is not as straightforward as synthetic polymers. Particularly for biopolymers such as pectin, molecular entanglements are essential but insufficient for successful spinning through the SBS production method. Such a challenge is due to the biopolymer's complex nature. However, incorporating an easily spinnable polymer precursor, such as polyacrylonitrile (PAN), to pectin effectively enabled the production of fibers from the SBS process. In this process, PAN-assisted pectin nanofibers are produced with average diameters ranging from 410.75 ± 3.73 to 477.09 ± 6.60 nm using a feed flow rate of 5 ml h^-1, air pressure of 3 bars, syringe tip to collector distance at 30 cm, and spinning time of 10 min. PAN in DMSO solvent at different volume ratios (i.e. 35%-55% v/v) was critical in assisting pectin to produce nanofibers. The addition of a high molecular weight polymer, PAN, to pectin also improved the viscoelasticity of the solution, eventually contributing to its successful SBS process. Furthermore, the composite SBS-spun fibers obtained suggest that its formation is concentration-dependent.

Controlled release and antiviral activity of acyclovir-loaded PLA/PEG nanofibers produced by solution blow spinning

Herpetic dermatitis and oral recurrent herpes (ORH) are among the most common human infections. Antiviral drugs such as acyclovir (ACV) are used in the standard treatment for ORH. Despite its therapeutic efficacy, ACV is continuously and repetitively administered in high doses. In this sense, the development of controlled release drug delivery systems such as core-shell fibers have a great potential in the treatment of ORH. In this work, poly(lactic acid)/poly(ethylene glycol) (PLA/PEG) fibers were produced by solution blow spinning (SBS) for the controlled release of ACV encapsulated in the core. PLA/PEG nanofibers containing four different blend ratios (100:0, 90:10, 80:20 and 70:30 wt%) without or with 10 wt% ACV were characterized by scanning electron microscopy (SEM), thermogravimetry (TG) and differential scanning calorimetry (DSC). The ACV release profile for 21 days was accessed by UV-Vis spectroscopy. Static water contact angles of the spun fiber mats were measured by the sessile drop method to evaluate fiber wettability upon contact with skin for transdermal release. Cytotoxicity and antiviral efficacy against Herpes simplex viruses (HSV-1) were evaluated using Vero cells. ACV addition did not impact on morphology, but slightly improved thermal stability of the fibers. Addition of hydrophilic PEG in PLA/PEG blends, however, increased drug release as confirmed by contact angle measurements and release profile. The in vitro tests showed the effectiveness of the drug delivery systems developed in reducing HSV-1 viral titer, which is related to the judicious combination of polymers used in the fibrous mats, in addition to not being cytotoxic to Vero cells. These results show the great potential of PLA/PEG solution blow-spun fibers in the controlled release of ACV to develop practical devices for the treatment of cold sores, while favoring the aesthetic appearance by covering them with a soft tissue patch (fibrous mats).

Evaluation of filter media covered with spun fibres and containing thyme essential oil with antimicrobial properties

Inhalation of bioaerosols has been linked to many health problems. Filter media impregnated with antimicrobial material can provide effective removal and inactivation of bioaerosols. In this study, fibres were spun on a substrate by centrifugal spinning, obtaining filter media denoted 5THY and THY. Thyme essential oil was used as an antimicrobial agent. For 5THY, the thyme essential oil was added to the polyacrylonitrile (PAN) solution, while for THY, it was sprayed onto the medium after the fibres had been produced. The THY medium presented a higher collection efficiency, compared to the substrate or 5THY, with efficiencies of 99% for microparticles and 58% for nanoparticles. Using the plaque assay method, THY provided the highest reductions of the bacteria Escherichia coli and Staphylococcus aureus, with efficiency of 99.999%. The findings demonstrated that filter media covered with spun fibres and containing thyme essential oil provided excellent antimicrobial action and filtration performance.

Simple Zn(ii) complexes for the production and degradation of polyesters

Nine new complexes based on thioether appended iminophenolate (ONS) ligands have been prepared and fully characterized in solution by NMR spectroscopy. Solid-state structures were also obtained for seven complexes. In solution, all complexes were monomeric. The complexes were highly active for the polymerization of purified rac-lactide ([M] : [Zn] : [BnOH] = 10 000 : 1 : 30 at 180 °C) reaching TOF values up to 250 000 h⁻¹. The kinetics of the polymerization have been probed by in situ Raman spectroscopy. The rate of reaction was dramatically reduced using technical grade rac-lactide with increased initiator loading. To move towards a circular economy, it is vital that catalysts are developed to facilitate chemical recycling of commodity and emerging polymeric materials. In this vein, the complexes have been assessed for their ability to break down poly(lactic acid) and poly(ethylene terephthalate). The results from both the polymerization and degradation reactions are discussed in terms of ligand functionality.

Nine new complexes based on thioether appended iminophenolate (ONS) ligands have been prepared and fully characterized in solution by NMR spectroscopy.

Nanotechnology and Reproductive Management of Farm Animals: Challenges and Advances

Reproductive efficiency of farm animals has central consequences on productivity and profitability of livestock farming systems. Optimal reproductive management is based on applying different strategies, including biological, hormonal, nutritional strategies, as well as reproductive disease control. These strategies should not only guarantee sufficient reproductive outcomes but should also comply with practical and ethical aspects. For example, the efficiency of the biological- and hormonal-based reproductive strategies is mainly related to several biological factors and physiological status of animals, and of nutritional strategies, additional factors, such as digestion and absorption, can contribute. In addition, the management of reproductive-related diseases is challenged by the concerns regarding the intensive use of antibiotics and the development of antimicrobial resistant strains. The emergence of nanotechnology applications in livestock farming systems may present innovative and new solutions for overcoming reproductive management challenges. Many drugs (hormones and antibiotics), biological molecules, and nutrients can acquire novel physicochemical properties using nanotechnology; the main ones are improved bioavailability, higher cellular uptake, controlled sustained release, and lower toxicity compared with ordinary forms. In this review, we illustrate advances in the most common reproductive management strategies by applying nanotechnology, considering the current challenges of each strategy.

Effectiveness of Core-Shell Nanofibers Incorporating Amphotericin B by Solution Blow Spinning Against Leishmania and Candida Species

The aim of this study was to develop polymeric nanofibers for controlled administration of Amphotericin B (AmpB), using the solution centrifugation technique, characterizing its microstructural and physical properties, release rate, and activity against Leishmania and Candida species. The core-shell nanofibers incorporated with AmpB were synthesized by Solution Blow Spinning (SBS) and characterized by scanning electron microscopy (SEM), differential scanning calorimetry, X-Ray diffraction, and drug release assay. In vitro leishmanicidal and antifungal activity were also evaluated. Fibrous membranes with uniform morphology and smooth surfaces were produced. The intensity of the diffraction peaks becomes slightly more pronounced, assuming the increased crystallization in PLA/PEG at high AmpB loadings. Drug release occurred and the solutions with nanofibers to encourage greater incorporation of AmpB showed a higher concentration. In the results of the experiment with promastigotes, the wells treated with nanofibers containing concentrations of AmpB at 0.25, 0.5, and 1%, did not have any viable cells, similar to the positive control. Various concentrations of AmpB improved the inhibition of fungal growth. The delivery system based on PLA/PEG nanofibers was properly developed for AmpB, presenting a controlled release and a successful encapsulation, as well as antifungal and antileishmanial activity.

Carriers based on poly-3-hydroxyalkanoates containing nanomagnetite to trigger hormone release

Poly-3-hydroxybutyrate (P(3HB)) and poly-3-hydroxybutyrate-co-3-hydroxyhexanoate (P(3HB-co-3HHx)) are biocompatible and bioabsorbable biopolymers produced by different bacteria with potential for drug delivery in thermo-responsive magnetic microcarriers. Microparticles of P(3HB) and P(3HB-co-3HHx), with 5.85% mol of 3HHx, produced by Burkholderia sacchari, containing nanomagnetite (nM) and lipophilic hormone were prepared by simple emulsion (oil/water) technique leading to progesterone (Pg) encapsulation efficiency higher than 70% and magnetite loads of 3.1 and 2.3% (w/w) for P(3HB)/nM/Pg and P(3HB-co-3HHx)/nM/Pg, respectively. These formulations were characterized by Infrared spectroscopy, X-ray diffraction, Thermal gravimetric analysis and Electron microscopy (TEM, SEM) techniques. The P(3HB)/nM/Pg and P(3HB-co-3HHx)/nM/Pg microparticles presented spherical geometry with wrinkled surfaces and average size between 2 and 40 μm for 90% of the microparticles. The release profiles of the P(3HB)/nM/Pg and P(3HB-co-3HHx)/nM/Pg formulations showed a hormone release trigger (6.9 and 11.1%, respectively) effect induced by oscillating external magnetic field (0.2 T), after 72 h. Progesterone release in non-magnetic tests with P(3HB-co-3HHx)/nM/Pg revealed a slight increment (5.6%) in relation to P(3HB)/nM/Pg. The experimental release of the P(3HB)/nM/Pg and P(3HB-co-3HHx)/nM/Pg samples presented a good agreement with Higuchi model. The 3HHx comonomer content improves the hormone release of the P(3HB-co-3HHx)/nM/Pg formulation with potential for application to synchronize the estrous cycle.

Advances in Functional Polymer Nanofibers: From Spinning Fabrication Techniques to Recent Biomedical Applications

Functional polymeric micro-/nanofibers have emerged as promising materials for the construction of structures potentially useful in biomedical fields. Among all kinds of technologies to produce polymer fibers, spinning methods have gained considerable attention. Herein, we provide a recent review on advances in the design of micro- and nanofibrous platforms via spinning techniques for biomedical applications. Specifically, we emphasize electrospinning, solution blow spinning, centrifugal spinning, and microfluidic spinning approaches. We first introduce the fundamentals of these spinning methods and then highlight the potential biomedical applications of such micro- and nanostructured fibers for drug delivery, tissue engineering, regenerative medicine, disease modeling, and sensing/biosensing. Finally, we outline the current challenges and future perspectives of spinning techniques for the practical applications of polymer fibers in the biomedical field.

A novel treatment strategy for preterm birth: Intra-vaginal progesterone-loaded fibrous patches

Progesterone-loaded poly(lactic) acid fibrous polymeric patches were produced using electrospinning and pressurized gyration for intra-vaginal application to prevent preterm birth. The patches were intravaginally inserted into rats in the final week of their pregnancy, equivalent to the third trimester of human pregnancy. Maintenance tocolysis with progesterone-loaded patches was elucidated by recording the contractile response of uterine smooth muscle to noradrenaline in pregnant rats. Both progesterone-loaded patches indicated similar results from release and thermal studies, however, patches obtained by electrospinning had smaller average diameters and more uniform dispersion compared to pressurized gyration. Patches obtained by pressurized gyration had better results in production yield and tensile strength than electrospinning; thereby pressurized gyration is better suited for scaled-up production. The patches did not affect cell attachment, viability, and proliferation on Vero cells negatively. Consequently, progesterone-loaded patches are a novel and successful treatment strategy for preventing preterm birth.

State-of-the-Art and Prospective of Nanotechnologies for Smart Reproductive Management of Farm Animals

Many biotechnological assisted reproductive techniques (ART) are currently used to control the reproductive processes of farm animals. Nowadays, smart ART that considers technique efficiency, animal welfare, cost efficiency and environmental health are developed. Recently, the nanotechnology revolution has pervaded all scientific fields including the reproduction of farm animals, facilitating certain improvements in this field. Nanotechnology could be used to improve and overcome many technical obstacles that face different ART. For example, semen purification and semen preservation processes have been developed using different nanomaterials and techniques, to obtain semen doses with high sperm quality. Additionally, nanodrugs delivery could be applied to fabricate several sex hormones (steroids or gonadotrophins) used in the manipulation of the reproductive cycle. Nanofabricated hormones have new specific biological properties, increasing their bioavailability. Applying nanodrugs delivery techniques allow a reduction in hormone dose and improves hormone kinetics in animal body, because of protection from natural biological barriers (e.g., enzymatic degradation). Additionally, biodegradable nanomaterials could be used to fabricate hormone-loaded devices that are made from non-degradable materials, such as silicon and polyvinyl chloride-based matrixes, which negatively impact environmental health. This review discusses the role of nanotechnology in developing some ART outcomes applied in the livestock sector, meeting the concept of smart production.

Current Applications of Biopolymer-based Scaffolds and Nanofibers as Drug Delivery Systems

BACKGROUND

The high surface-to-volume ratio of polymeric nanofibers makes them an effective vehicle for the release of bioactive molecules and compounds such as growth factors, drugs, herbal extracts and gene sequences. Synthetic polymers are commonly used as sensors, reinforcements and energy storage, whereas natural polymers are more prone to mimicking an extracellular matrix. Natural polymers are a renewable resource and classified as an environmentally friendly material, which might be used in different techniques to produce nanofibers for biomedical applications such as tissue engineering, implantable medical devices, antimicrobial barriers and wound dressings, among others. This review sheds some light on the advantages of natural over synthetic polymeric materials for nanofiber production. Also, the most important techniques employed to produce natural nanofibers are presented. Moreover, some pieces of evidence regarding toxicology and cell-interactions using natural nanofibers are discussed. Clearly, the potential extrapolation of such laboratory results into human health application should be addressed cautiously.

The development of progesterone-loaded nanofibers using pressurized gyration: A novel approach to vaginal delivery for the prevention of pre-term birth

Recent evidence has continued to support the applicability of progesterone in preventing preterm birth, hence the development of an appropriate vaginal delivery system for this drug would be of considerable interest. Here, we describe the development of progesterone-loaded bioadhesive nanofibers using pressurized gyration for potential incorporation into a vaginal insert, with a particular view to addressing the challenges of incorporating a poorly water-soluble drug into a hydrophilic nanofiber carrier. Polyethylene oxide and carboxymethyl cellulose were chosen as polymers to develop the carrier systems, based on previous evidence of their yielding mucoadhesive nanofibers using the pressurized gyration technique. The fabrication parameters such as solvent system, initial drug loading and polymer composition were varied to facilitate optimisation of fiber structure and efficiency of drug incorporation. Such studies resulted in the formation of nanofibers with satisfactory surface appearance, diameters in the region of 400 nm and loading of up to 25% progesterone. Thermal and spectroscopic analyses indicated that the drug was incorporated in a nanocrystalline state. Release from the drug-loaded fibers indicated comparable rates of progesterone dissolution to that of Cyclogest, a commercially available progesterone pessary, allowing release over a period of hours. Overall, the study has shown that pressurized gyration may produce bioadhesive progesterone-loaded nanofibers which have satisfactory loading of a poorly water-soluble drug as well as having suitable structural and release properties. The technique is also capable of producing fibers at a yield commensurate with practical applicability, hence we believe that the approach shows considerable promise for the development of progesterone dosage forms for vaginal application.

Fabrication of Progesterone-Loaded Nanofibers for the Drug Delivery Applications in Bovine

Progesterone is a potent drug for synchronization of the estrus and ovulation cycles in bovine. At present, the estrus cycle of bovine is controlled by the insertion of progesterone-embedded silicone bands. The disadvantage of nondegradable polymer inserts is to require for disposal of these bands after their use. The study currently focuses on preparation of biodegradable progesterone-incorporated nanofiber for estrus synchronization. Three different concentrations (1.2, 1.9, and 2.5 g) of progesterone-impregnated nanofibers were fabricated using electrospinning. The spun membrane were characterized by scanning electron microscopy, X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, and Fourier transform infrared spectroscopy. Uniform surface morphology, narrow size distribution, and interaction between progesterone and zein were confirmed by SEM. FTIR spectroscopy indicated miscibility and interaction between zein and progesterone. X-ray analysis indicated that the size of zein crystallites increased with progesterone content in nanofibers. Significant differences in thermal behavior of progesterone-impregnated nanofiber were observed by DSC. Cell viability studies of progesterone-loaded nanofiber were examined using MTT assay. In vitro release experiment is to identify the suitable progesterone concentration for estrus synchronization. This study confirms that progesterone-impregnated nanofibers are an ideal vehicle for progesterone delivery for estrus synchronization of bovines.

In vitro and in vivo biological characterization of poly(lactic acid) fiber scaffolds synthesized by air jet spinning

Poly(lactic acid) (PLA) is one of the most promising renewable and biodegradable polymers for mimic extracellular matrix for tissue engineering applications. In this work, PLA spun membrane scaffold were successfully prepared by air jet spinning technology. Morphology, mechanical properties, in vitro biocompatibility, and in vitro and in vivo degradation of PLA fibrous scaffold were characterized by X-ray diffraction, Fourier Transform Infrared, and scanning electron microscope (SEM). Morphological results assessed by SEM analyses indicated that PLA scaffolds possessed an average fiber diameter of approximately 0.558 ± 0.141 µm for 7% w/v of PLA and approximately 0.647 ± 0.137 µm for 10% w/v. Interestingly, our results showed that the nanofiber size of PLA scaffold allow structural stability after 100 days of in vitro degradation in Ringer solution where the average fiber diameter were of approximately 0.633 ± 0.147 µm for 7% w/v and approximately 0.645 ± 0.140 µm for 10% w/v of PLA. Mechanical properties of PLA fibers scaffold after in vitro degradation showed decrease in terms of flexibility elongation, and less energy was needed to achieve maximal elastic deformation. The fiber size exerts an influence on the biological response of human Bone Marrow Mesenchymal Stromal Cells as confirmed by MTT assay after 9 days of cell culture and the in vivo degradation assay of 7% w/v and 10% w/v of PLA scaffold, did not demonstrate evidence of toxicity with a mild inflammatory respond. In conclusion, airbrushing technology promises to be a viable and attractive alternative technique for producing a biocompatible PLA nanofiber scaffold that could be considered for tissue engineering regeneration. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2435-2446, 2018.

Preparation of Solution Blown Polyamic Acid Nanofibers and Their Imidization into Polyimide Nanofiber Mats

Solution blow spinning (SBS) is an innovative process for spinning micro/nanofibers. In this paper, polyamic acid (PAA) nanofibers were fabricated via a SBS apparatus and then imidized into polyimide (PI) nanofibers via thermal process. The morphology and diameter distributions of PAA nanofibers were determined by scanning electron microscope (SEM) and Image Tool software, the processing parameters, including PAA concentration, solution feeding rate, gas pressure, nozzle size, and receiving distance were investigated in details. The fourier transform infrared spectroscopy (FTIR) was used to characterize the chemical changes in the nanofibers after thermal imidization. The results showed that the solution concentration exhibited a notable correlation with spinnability, and the formation of bead defects in PAA nanofibers. Solution feeding rate, gas pressure, nozzle size, and receiving distance affected nanofiber production efficiency and diameter distribution. The average diameters of fibers produced ranged from 129.6 to 197.7 nm by varying SBS parameters. Precisely, PAA nanofibers with good morphology were obtained and the average diameter of nanofibers was 178.2 nm with optimum process parameter. After thermal imidization, the PI nanofibers exhibited obvious adhesion morphology among interconnected fibers, with an increased average diameter of 209.1 nm. The tensile strength of resultant PI nanofiber mat was 12.95 MPa.

Method Validation for Progesterone Determination in Poly(methyl methacrylate) Nanoparticles Synthesized via Miniemulsion Polymerization

Exogenous progesterone has several applications in human health and in veterinary medicine, especially in fixed-time artificial insemination protocol. Progesterone nanoencapsulation in biocompatible polymers, such as poly(methyl methacrylate) (PMMA), is an alternative to substitute silicone-based release device traditionally used for estrus control. Progesterone concentration inside the nanoparticles must be precisely known; for that reason, a validation methodology must be applied to ensure reliable results, suitable for nanoparticles application. In this work, an UV-Vis spectrophotometric method was validated for the determination of progesterone in PMMA nanoparticles synthesized by miniemulsion polymerization. Chloroform was used as solvent, showing selectivity to the encapsulated drug and the components of the polymeric matrix did not influence progesterone recovery. Detection and quantitation limits (DL and QL) obtained were 0.32 and 0.96 mg·L−1, respectively, and precision tests (between different analysts and equipment) indicated acceptable Relative Standard Deviations (RSD < 5%). Miniemulsion polymerization reactions were carried out producing two different morphologies: nanospheres (NS) and nanocapsules (NC), with average intensity diameters (Dz) of 150–200 nm and 240–300 nm, respectively. Polymerization gravimetric conversions obtained for both cases were higher than 95% and encapsulation efficiencies greater than 69% and 90% for the nanospheres and nanocapsules, respectively.

A Review of the Fundamental Principles and Applications of Solution Blow Spinning

Solution blow spinning (SBS) is a technique that can be used to deposit fibers in situ at low cost for a variety of applications, which include biomedical materials and flexible electronics. This review is intended to provide an overview of the basic principles and applications of SBS. We first describe a method for creating a spinnable polymer solution and stable polymer solution jet by manipulating parameters such as polymer concentration and gas pressure. This method is based on fundamental insights, theoretical models, and empirical studies. We then discuss the unique bundled morphology and mechanical properties of fiber mats produced by SBS, and how they compare with electrospun fiber mats. Applications of SBS in biomedical engineering are highlighted, showing enhanced cell infiltration and proliferation versus electrospun fiber scaffolds and in situ deposition of biodegradable polymers. We also discuss the impact of SBS in applications involving textiles and electronics, including ceramic fibers and conductive composite materials. Strategies for future research are presented that take advantage of direct and rapid polymer deposition via cost-effective methods.

Processing and surface modification of polymer nanofibers for biological scaffolds: a review

Polymeric fibrous constructs possess high surface area-to-volume ratios when compared with solid substrates and are quite commonly used as tissue engineering and cell growth scaffolds. An overview of important design and material considerations for fibrous scaffolds as well as an outline of both established and emerging solution- and melt-based fabrication techniques is provided. Innovative post-process surface modification avenues using "click" chemistry with both single and dual active cues as well as gradient cues, which maintain the fibrous structure are described. By combining process parameters with post-process surface modification, researchers have been able to selectively tune cellular response after seeding and culturing on fibrous constructs.

Modeling of Progesterone Release from Poly(3-Hydroxybutyrate) (PHB) Membranes

Poly(3-hydroxybutyrate) (PHB) biodegradable polymeric membranes were evaluated as platform for progesterone (Prg)-controlled release. In the design of new drug delivery systems, it is important to understand the mass transport mechanism involved, as well as predict the process kinetics. Drug release experiments were conducted and the experimental results were evaluated using engineering approaches that were extrapolated to the pharmaceutical field by our research group. Membranes were loaded with different Prg concentrations and characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). SEM images showed that membranes have a dense structure before and after the progesterone addition. DSC and FTIR allowed determining the influence of the therapeutic agent in the membrane properties. The in vitro experiments were performed using two different techniques: (A) returning the sample to the receptor solution (constant volume of the delivery medium) and (B) extracting total volume of the receptor solution. In this work, we present a simple and accurate "lumped" second-order kinetic model. This lumped model considers the different mass transport steps involved in drug release systems. The model fits very well the experimental data using any of the two experimental procedures, in the range 0 ≤ t ≤ ∞ or 0 ≤ M t  ≤ M ∞. The drug release analysis using our proposed approaches is relevant for establishing in vitro-in vivo correlations in future tests in animals.

Obtenção de micro e nanofibras de PVC pela técnica de Fiação por Sopro em Solução

Neste trabalho, micro e nanofibras de PVC foram obtidas pela técnica de Fiação por Sopro em Solução, uma técnica recentemente desenvolvida capaz de produzir micro e nanoestruturas poliméricas com velocidade alta e preços que rivalizam a eletrofiação. As micro e nanofibras produzidas neste trabalho, a partir de soluções de PVC em tetrahidrofurano tiveram diâmetros médios entre 217 nm e 2,5 μm. Os efeitos das condições de processamento foram avaliados, sendo que a concentração da solução polimérica foi o parâmetro de maior influência no diâmetro médio. Também foi observado que a estabilidade térmica das micro e nanofibras não foi afetada pela técnica de fiação por sopro em solução.

In Situ Deposition of PLGA Nanofibers via Solution Blow Spinning

Nanofiber mats and scaffolds have been widely investigated for biomedical applications. Commonly fabricated using electrospinning, nanofibers are generated ex situ using an apparatus that requires high voltages and an electrically conductive target. We report the use of solution blow spinning to generate conformal nanofiber mats/meshes on any surface in situ, utilizing only a commercial airbrush and compressed CO₂. Solution and deposition conditions of PLGA nanofibers were optimized and mechanical properties characterized with dynamic mechanical analysis. Nanofiber mat degradation was monitored for morphologic and molecular weight changes in vitro. Biocompatibility of the direct deposition of nanofibers onto two cell lines was demonstrated in vitro and interaction with blood was qualitatively assessed with scanning electron microscopy. A pilot animal study illustrated the wide potential of this technique across multiple surgical applications, including its use as a surgical sealant, hemostatic, and buttress for tissue repair.