Antibacterial performance of ZnO-based fillers with mesoscale structured morphology in model medical PVC composites

Assessing Antimicrobial Efficacy on Plastics and Other Non-Porous Surfaces: A Closer Look at Studies Using the ISO 22196:2011 Standard

The survival and spread of foodborne and nosocomial-associated bacteria through high-touch surfaces or contamination-prone sites, in either healthcare, domestic or food industry settings, are not always prevented by the employment of sanitary hygiene protocols. Antimicrobial surface coatings have emerged as a solution to eradicate pathogenic bacteria and prevent future infections and even outbreaks. Standardised antimicrobial testing methods play a crucial role in validating the effectiveness of these materials and enabling their application in real-life settings, providing reliable results that allow for comparison between antimicrobial surfaces while assuring end-use product safety. This review provides an insight into the studies using ISO 22196, which is considered the gold standard for antimicrobial surface coatings and examines the current state of the art in antimicrobial testing methods. It primarily focuses on identifying pitfalls and how even small variations in methods can lead to different results, affecting the assessment of the antimicrobial activity of a particular product.

Synthesis and characterization of functionalized modified PVC-chitosan as antimicrobial polymeric biomaterial

Amino acetic acid modified poly(vinyl chloride), MPVC, was obtained by chemical modification of PVC using glycine methyl ester. MPVC was used as a precursor to prepare some functionalized MPVC conjugates to be used in biomedical applications. MPVC-Cs was prepared by the chemical reaction of MPVC with chitosan as a natural polymer in absence and presence of epichlorohydrin (Ech) as a crosslinking agent. Further chemical modification was performed by the reaction of MPVC with Cs and salicylic acid in the absence in presence of Ech via one-pot reaction. The chemical structure of the formed MPVC, MPVC-Cs, MPVC-Cs/POH, MPVC-Cs/SA and MPVC-Cs/POH/SA was confirmed by the FTIR spectroscopic analysis, scanning electron microscopy, and thermogravimetric analysis (TGA). The antibacterial activity of the prepared MPVC and its conjugates was investigated against two Gram +ve bacteria (Staphylococcus aurous and Listeria monocytogenes) and (Escherichia coli and Salmonella typhi) as Gram −ve bacteria in addition to the Catondida albicans as yeast. Minimum inhibition concentration (MIC) was also determined for the prepared materials.

PVC grafted zinc oxide nanoparticles as an inhospitable surface to microbes

Antimicrobial Polyvinyl chloride (PVC) was obtained by covalent bonding of zinc oxide nanoparticles, which have gained important achievements in antimicrobial fields because of their auspicious properties. This was achieved by grafting mercaptopropyltrimethoxysilane onto PVC, followed by the growth of zinc oxide nanoparticles covalently bonded on the polymer surface. In this study, the relationship between the physicochemical features of modified-surface PVC and antimicrobial activity on Staphylococcus aureus and Candida albicans was investigated. Zinc oxide with controllable morphologies (rods, rod flowers, and petal flowers) was synthesized on the polymer surface by tuning merely base-type and concentration using a hydrothermal process. The antimicrobial activity was more pronounced for rod flower morphology, because of their differences in microscopic parameters such as specific Zn-polar planes. This work provides an important hint for the safe use of PVC for biomedical devices by the structure surface tuning without injuring polymer bulk properties and a reduced risk of the covalently bonded nanoparticle dispersion in the host and the environment.

Antibacterial Activity and Cytotoxicity of Immobilized Glucosamine/Chondroitin Sulfate on Polylactic Acid Films

Polylactic acid (PLA) is one of the most produced polymeric materials, due to its exceptional chemical and mechanical properties. Some of them, such as biodegradability and biocompatibility, make them attractive for biomedical applications. Conversely, the major drawback of PLA in the biomedical field is their vulnerability to bacterial contamination. This study focuses on the immobilization of saccharides onto the PLA surface by a multistep approach, with the aim of providing antibacterial features and evaluting the synergistic effect of these saccharides. In this approach, after poly (acrylic acid) (PAA) brushes attached non-covalently to the PLA surface via plasma post-irradiation grafting technique, immobilization of glucosamine (GlcN) and chondroitin sulfate (ChS) to the PAA brushes was carried out. To understand the changes in surface properties, such as chemical composition, surface topography and hydrophilicity, the untreated and treated PLA films were analyzed using various characterization techniques (contact angle, scanning electron microscopy, X-ray photoelectron spectroscopy). In vitro cytotoxicity assays were investigated by the methyl tetrazolium test. The antibacterial activity of the PLA samples was tested against Escherichia coli and Staphylococcus aureus bacteria strains. Plasma-treated films immobilized with ChS and GlcN, separately and in combination, demonstrated bactericidal effect against the both bacteria strains and also the results revealed that the combination has no synergistic effect on antibacterial action.

Critical physiological factors influencing the outcome of antimicrobial testing according to ISO 22196 / JIS Z 2801

Bactericidal materials gained interest in the health care sector as they are capable of preventing material surfaces from microbial colonization and subsequent spread of infections. However, commercialization of antimicrobial materials requires proof of their efficacy, which is usually done using in vitro methods. The ISO 22196 standard (Japanese test method JIS Z 2801) is a method for measuring the antibacterial activity of daily goods. As it was found reliable for testing the biocidal activity of antimicrobially active materials and surface coatings most of the laboratories participating in this study used this protocol. Therefore, a round robin test for evaluating antimicrobially active biomaterials had to be established. To our knowledge, this is the first report on inaugurating a round robin test for the ISO 22196 / JIS Z 2801. The first round of testing showed that analyses in the different laboratories yielded different results, especially for materials with intermediate antibacterial effects distinctly different efficacies were noted. Scrutinizing the protocols used by the different participants and identifying the factors influencing the test outcomes the approach was unified. Four critical factors influencing the outcome of antibacterial testing were identified in a series of experiments: (1) incubation time, (2) bacteria starting concentration, (3) physiological state of bacteria (stationary or exponential phase of growth), and (4) nutrient concentration. To our knowledge, this is the first time these parameters have been analyzed for their effect on the outcome of testing according to ISO 22196 / JIS Z 2801. In conclusion, to enable assessment of the results obtained it is necessary to evaluate these single parameters in the test protocol carefully. Furthermore, uniform and robust definitions of the terms antibacterial efficacy / activity, bacteriostatic effects, and bactericidal action need to be agreed upon to simplify communication of results and also regulate expectations regarding antimicrobial tests, outcomes, and materials.

Synthesis and Effect of Hierarchically Structured Ag-ZnO Hybrid on the Surface Antibacterial Activity of a Propylene-Based Elastomer Blends

In this study, a hybrid Ag-ZnO nanostructured micro-filler was synthesized by the drop technique for used in plastic and medical industry. Furthermore, new antibacterial polymer nanocomposites comprising particles of Ag-ZnO up to 5 wt % and a blend of a thermoplastic polyolefin elastomer (TPO) with polypropylene were prepared using twin screw micro-compounder. The morphology and crystalline-phase structure of the hybrid Ag-ZnO nanostructured microparticles obtained was characterized by scanning electron microscopy and powder X-ray diffractometry. The specific surface area of this filler was investigated by means of nitrogen sorption via the Brunauer-Emmet-Teller method. A scanning electron microscope was used to conduct a morphological study of the polymer nanocomposites. Mechanical and electrical testing showed no adverse effects on the function of the polymer nanocomposites either due to the filler utilized or the given processing conditions, in comparison with the neat polymer matrix. The surface antibacterial activity of the compounded polymer nanocomposites was assessed against Escherichia coli ATCC 8739 and Staphylococcus aureus ATCC 6538P, according to ISO 22196:2007 (E). All the materials at virtually every filler-loading level were seen to be efficient against both species of bacteria.

Copper/zinc bimetal nanoparticles-dispersed carbon nanofibers: A novel potential antibiotic material

Copper (Cu) and zinc (Zn) nanoparticles (NPs) were asymmetrically distributed in carbon nanofibers (CNFs) grown on an activated carbon fiber (ACF) substrate by chemical vapor deposition (CVD). The CVD conditions were chosen such that the Cu NPs moved along with the CNFs during tip-growth, while the Zn NPs remained adhered at the ACF. The bimetal-ACF/CNF composite material was characterized by the metal NP release profiles, in-vitro hemolytic and antibacterial activities, and bacterial cellular disruption and adhesion assay. The synergetic effects of the bimetal NPs distributed in the ACFs/CNFs resulted from the relatively slower release of the Cu NPs located at the tip of the CNFs and faster release of the Zn NPs dispersed in the ACF. The Cu/Zn-grown ACFs/CNFs inhibited the growth of the Gram negative Escherichia coli, Gram positive Staphylococcus aureus, and Methicillin resistance Staphylococcus aureus bacterial strains, with superior efficiency (instant and prolonged inhibition) than the Cu or Zn single metal-grown ACFs/CNFs. The prepared bimetal-carbon composite material in this study has potential to be used in different biomedical applications such as wound healing and antibiotic wound dressing.