Dual labeled Ag@SiO₂ core-shell nanoparticle based optical immunosensor for sensitive detection of E. coli

Biosensors Coupled with Signal Amplification Technology for the Detection of Pathogenic Bacteria: A Review

Foodborne disease caused by foodborne pathogens is a very important issue in food safety. Therefore, the rapid screening and sensitive detection of foodborne pathogens is of great significance for ensuring food safety. At present, many research works have reported the application of biosensors and signal amplification technologies to achieve the rapid and sensitive detection of pathogenic bacteria. Thus, this review summarized the use of biosensors coupled with signal amplification technology for the detection of pathogenic bacteria, including (1) the development, concept, and principle of biosensors; (2) types of biosensors, such as electrochemical biosensors, optical biosensors, microfluidic biosensors, and so on; and (3) different kinds of signal amplification technologies applied in biosensors, such as enzyme catalysis, nucleic acid chain reaction, biotin-streptavidin, click chemistry, cascade reaction, nanomaterials, and so on. In addition, the challenges and future trends for pathogenic bacteria based on biosensor and signal amplification technology were also discussed and summarized.

A robust electrochemical immunosensor based on core-shell nanostructured silica-coated silver for cancer (carcinoembryonic-antigen-CEA) diagnosis

This work addresses the fabrication of an efficient, novel, and economically viable immunosensing armamentarium that will detect the carcinoembryonic antigen (CEA) typically associated with solid tumors (sarcomas, carcinomas, and lymphomas) and is used as a clinical tumor marker for all these malignancies. We synthesized silver nanoparticles by single-step chemical reduction and coated with silica using a modified Stober method to fabricate silica-coated silver core-shell nanoparticles. The morphologies, structure, and size of the nanoparticles were characterized by Transmission Electron Microscopy (TEM), UV-Visible spectroscopy, X-ray diffraction (XRD), Raman spectroscopy, Fourier Transform Infra-Red Spectroscopy (FTIR), and Dynamic Light Scattering (DLS), respectively. The results indicated that the average size of Ag nanoparticles and silica-coated Ag nanoparticles is 50 nm and 80 nm, respectively. Our TEM results indicate that the silica-shell uniformly encapsulates silver core particles. Further, a disposable electrochemical immunosensor for carcinoembryonic antigen (CEA) was proposed based on the antigen immobilized in a silica-coated silver core-shell nanoparticle film on the surface of an indium-tin-oxide (ITO) flat substrate. The morphological characteristics of the constructed biosensor were observed by scanning electron microscopy (SEM) and electrochemical methods. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were employed for the characterization of the proposed bioelectrode. The cyclic voltammogram appears to be more irreversible on silica coated silver core-shell nanoparticles. It is found that the fabricated immunosensor shows fast potentiometric response under the optimized conditions. The CEA could be determined in the linear range from 0.5 to 10 ng mL-1 with a detection limit of 0.01 ng mL-1 using the interface. The developed flat substrate of ITO for CEA detection (the model reagent) is a potentially promising immunosensing system, manifests good stability, and allows batch fabrication because of its economic feasibility.

Biosynthesis of AgNPs onto the urea-based periodic mesoporous organosilica (AgxNPs/Ur-PMO) for antibacterial and cell viability assay

Nano-size silver particles were stabilized on the inner surfaces of urea based periodic mesoporous organosilica (Ur-PMO). Aqueous extract of Euphorbia leaves as a sustainable and green reducing agent was applied for Ag-nanoparticles growth into the Ur-PMO channels. Physical and chemical properties of organosilica materials synthesized using various techniques such as FT-IR, small-angle XRD, PXRD, FESEM, TEM, SEM-EDX and atomic absorption spectrometry (AAS) were examined. Finally, the AgNPs/Ur-PMO were investigated on cell viability assay. An in vitro cytotoxicity test using MMT assay displayed that the designed material has good biocompatibility and could be a promising candidate for biomedical applications. The results also showed that the AgNPs/Ur-PMO compounds (especially, PMO; 1.27% AgNPs) had relatively good antibacterial and antibiofilm effects. It seems that the use of these compounds in hospital environments can reduce nosocomial infections as well as reduce antibiotic-resistant bacteria.

Magnetosome-anti-Salmonella antibody complex based biosensor for the detection of Salmonella typhimurium

Epidemic Salmonellosis contracted through the consumption of contaminated food substances is a global concern. Thus, simple and effective diagnostic methods are needed. Magnetosome-based biosensors are gaining attention because of their promising features. Here, we developed a biosensor employing a magnetosome-anti-Salmonella antibody complex to detect lipopolysaccharide (somatic "O" antigen) and Salmonella typhimurium in real samples. Magnetosome was extracted from Magnetospirillum sp. RJS1 and characterized by microscopy. The magnetosome samples (1 and 2 mg/mL) were directly conjugated to anti-Salmonella antibody (0.8-200 μg/mL) and confirmed by spectroscopy and zeta potential. The concentrations of magnetosome, antibody and lipopolysaccharide were optimized by ELISA. The 2 mg/mL-0.8 μg/mL magnetosome-antibody complex was optimal for detecting lipopolysaccharide (0.001 μg/mL). Our assay is a cost-effective (60%) and sensitive (50%) method in detection of lipopolysaccharide. The optimized magnetosome-antibody complex was applied to an electrode surface and stabilized using an external magnetic field. Increased resistance confirmed the detection of lipopolysaccharide (at 0.001-0.1 μg/mL) using impedance spectroscopy. Significantly, the R² value was 0.960. Then, the developed prototype biosensor was applied to food and water samples. ELISA confirmed the presence of lipopolysaccharide in homogenized infected samples and cross reactivity assays confirmed the specificity of the biosensor. Further, the biosensor showed low detection limit (10¹ CFU/mL) in water and milk sample demonstrating its sensitivity. Regression coefficient of 0.974 in water and 0.982 in milk was obtained. The magnetosome-antibody complex captured 90% of the S. typhimurium in real samples which was also confirmed in FE-SEM. Thus, the developed biosensor is selective, specific, rapid and sensitive for detection of S. typhimurium.

Surface modification of plasmonic noble metal-metal oxide core-shell nanoparticles

A comprehensive survey on the methods for the surface modification of plasmonic noble metal-metal oxide core-shell nanoparticles is presented. The review highlights various strategies for covalent attachment and electrostatic binding of molecules and molecular ions to core-shell nanoparticles with a focus on plasmonically active silver and gold nanoparticles encapsulated by SiO₂ and TiO₂ shells.

Sensors Based on Bio and Biomimetic Receptors in Medical Diagnostic, Environment, and Food Analysis

Analytical chemistry is now developing mainly in two areas: automation and the creation of complexes that allow, on the one hand, for simultaneously analyzing a large number of samples without the participation of an operator, and on the other, the development of portable miniature devices for personalized medicine and the monitoring of a human habitat. The sensor devices, the great majority of which are biosensors and chemical sensors, perform the role of the latter. That last line is considered in the proposed review. Attention is paid to transducers, receptors, techniques of immobilization of the receptor layer on the transducer surface, processes of signal generation and detection, and methods for increasing sensitivity and accuracy. The features of sensors based on synthetic receptors and additional components (aptamers, molecular imprinted polymers, biomimetics) are discussed. Examples of bio- and chemical sensors' application are given. Miniaturization paths, new power supply means, and wearable and printed sensors are described. Progress in this area opens a revolutionary era in the development of methods of on-site and in-situ monitoring, that is, paving the way from the "test-tube to the smartphone".

Fluorescence quenching of MoS2 nanosheets/DNA/silicon dot nanoassembly: effective and rapid detection of Hg2+ ions in aqueous solution

Mercury (Hg) contamination of aquatic sites represents a serious risk for human health and the environment. Therefore, effective and rapid monitoring of Hg in aqueous samples is a challenge of timely importance nowadays. In the present study, a rapid and sensitive mercury sensor based on the fluorescence quenching of MoS₂ nanosheets/DNA/silicon dot nanoassembly has been developed for the efficient detection of mercury(II) in aquatic environments. In this process, silicon dots were synthesized through one-step high-temperature calcinations and thermomagnesium reduction method at 900 °C using rice husk as a silicon source, which demonstrates superior photophysical properties and excitation-dependent fluorescence behavior. The interaction between MoS₂ nanosheets/DNA/silicon dot nanoassembly and Hg²⁺ ions was studied using photoluminescence spectroscopy. The addition of Hg²⁺ ions to the assay solution induced the detachment of fluorescent probe from the surface of MoS₂ nanosheets. Thus, the fluorescent probes sustained its fluorescence intensity. The developed sensor was tested on various concentrations of Hg²⁺ ions ranging from 0 to 1000 nM as well as on various metal ions. In addition, MoS₂ nanosheets/DNA/silicon dot nanoassembly fluorescent Hg sensor efficiently detected the presence of Hg²⁺ ions in real-time water samples, which was comparably detected by the conventional atomic absorbance spectrometer (AAS). Overall, our results highlighted the high reliability of the present approach for environmental monitoring of Hg²⁺ ions, if compared to that of the customary method with a lowest detection limit of 0.86 nM.

Exploiting pH-Regulated Dimer-Tetramer Transformation of Concanavalin A to Develop Colorimetric Biosensing of Bacteria

Gold nanoparticles (AuNPs) aggregation-based colorimetric biosensing remains a challenge for bacteria due to their large size. Here we propose a novel colorimetric biosensor for rapid detection of Escherichia coli O157:H7 (E. coli O157:H7) in milk samples based on pH-regulated transformation of dimer/tetramer of Concanavalin A (Con A) and the Con A-glycosyl recognition. Briefly, antibody-modified magnetic nanoparticles was used to capture and concentrate E. coli O157:H7 and then to label with Con A; pH adjusted to 5 was then applied to dissociate Con A tetramer to release dimer, which was collected and re-formed tetramer at pH of 7 to cause the aggregation of dextran-modified AuNPs. The interesting pH-dependent conformation-transformation behavior of Con A innovated the design of the release from the bacteria surface and then the reconstruction of Con A. Therefore, we realized the sensitive colorimetric biosensing of bacteria, which are much larger than AuNPs that is generally not suitable for this kind of method. The proposed biosensor exhibited a limit of detection down to 41 CFU/mL, short assay time (~95 min) and satisfactory specificity. The biosensor also worked well for the detection in milk sample, and may provide a universal concept for the design of colorimetric biosensors for bacteria and virus.

Signal amplification strategy using gold/N-trimethyl chitosan/iron oxide magnetic composite nanoparticles as a tracer tag for high-sensitive electrochemical detection

This study presents a novel signal amplification method for high-sensitive electrochemical immunosensing. Gold (Au)/N-trimethyl chitosan (TMC)/iron oxide (Fe3O4) (shell/shell/core) nanocomposite was used as a tracing tag to label antibody. The tag was shown to be capable of amplifying the recognition signal by high-density assembly of Au nanoparticles (NPs) on TMC/Fe3O4 particles. The remarkable conductivity of AuNPs provides a feasible pathway for electron transfer. The method was found to be simple, reliable and capable of high-sensitive detection of human serum albumin as a model, down to 0.2 pg/ml in the range of 0.25-1000 pg/ml. Findings of the present study would create new opportunities for sensitive and rapid detection of various analytes.

Photocatalytic inactivation of E. Coli by ZnO–Ag nanoparticles under solar radiation

Porous and fluffy ZnO photocatalysts were successfully preparedviasimple solution based combustion synthesis method for effectiveE. Coliinactivation.