PEGylation of novel hydroxyapatite/PEG/Ag nanocomposite particles to improve its antibacterial efficacy

Advances in bioinspired nanomaterials managing microbial biofilms and virulence: A critical analysis

Microbial virulence and biofilm formation stand as a big concern against the goal of achieving a green and sustainable future. Microbial pathogenesis is the process by which the microbes (bacterial, fungal, and viral) cause illness in their respective host organism. 'Nanotechnology' is a state-of-art discipline to address this problem. The use of conventional techniques against microbial proliferation has been challenging against the environment. To tackle this problem, there has been a revolution in this multi-disciplinary field, to address the aspect of bioinspired nanomaterials in the antibiofilm and antimicrobial sector. Bioinspired nanomaterials prove to be a potential antibiofilm and antimicrobial agent as they are non-hazardous to the environment and mostly synthesized using a single-step reduction protocol. They exhibit synergistic effects against bacterial, fungal, and viral pathogens and thereby, control the virulence. In this literature review, we have elucidated the potential of bioinspired nanoparticles as well as nanomaterials as a promising anti-microbial treatment pedagogy and throw light on the advancements in how smart photo-switchable platforms have been designed to exhibit both bacterial releasing as well as bacterial-killing properties. Certain limitations and possible outcomes of these bio-based nanomaterials have been discussed in the hope of achieving a green and sustainable ecosystem.

Physicochemical Properties of Inorganic and Hybrid Hydroxyapatite-Based Granules Modified with Citric Acid or Polyethylene Glycol

This study delves into the physicochemical properties of inorganic hydroxyapatite (HAp) and hybrid hydroxyapatite-chitosan (HAp-CTS) granules, also gold-enriched, which can be used as aggregates in biomicroconcrete-type materials. The impact of granules' surface modifications with citric acid (CA) or polyethylene glycol (PEG) was assessed. Citric acid modification induced increased specific surface area and porosity in inorganic granules, contrasting with reduced parameters in hybrid granules. PEG modification resulted in a slight increase in specific surface area for inorganic granules and a substantial rise for hybrid granules with gold nanoparticles. Varied effects on open porosity were observed based on granule type. Microstructural analysis revealed increased roughness for inorganic granules post CA modification, while hybrid granules exhibited smoother surfaces. Novel biomicroconcretes, based on α-tricalcium phosphate (α-TCP) calcium phosphate cement and developed granules as aggregates within, were evaluated for compressive strength. Compressive strength assessments showcased significant enhancement with PEG modification, emphasizing its positive impact. Citric acid modification demonstrated variable effects, depending on granule composition. The incorporation of gold nanoparticles further enriched the multifaceted approach to enhancing calcium phosphate-based biomaterials for potential biomedical applications. This study demonstrates the pivotal role of surface modifications in tailoring the physicochemical properties of granules, paving the way for advanced biomicroconcretes with improved compressive strength for diverse biomedical applications.

Silver-Containing Biomaterials for Biomedical Hard Tissue Implants

Bacterial infection caused by biomaterials is a very serious problem in the clinical treatment of implants. The emergence of antibiotic resistance has prompted other antibacterial agents to replace traditional antibiotics. Silver is rapidly developing as an antibacterial candidate material to inhibit bone infections due to its significant advantages such as high antibacterial timeliness, high antibacterial efficiency, and less susceptibility to bacterial resistance. However, silver has strong cytotoxicity, which can cause inflammatory reactions and oxidative stress, thereby destroying tissue regeneration, making the application of silver-containing biomaterials extremely challenging. In this paper, the application of silver in biomaterials is reviewed, focusing on the following three issues: 1) how to ensure the excellent antibacterial properties of silver, and not easy to cause bacterial resistance; 2) how to choose the appropriate method to combine silver with biomaterials; 3) how to make silver-containing biomaterials in hard tissue implants have further research. Following a brief introduction, the discussion focuses on the application of silver-containing biomaterials, with an emphasis on the effects of silver on the physicochemical properties, structural properties, and biological properties of biomaterials. Finally, the review concludes with the authors' perspectives on the challenges and future directions of silver in commercialization and in-depth research.

Hope for bone regeneration: The versatility of iron oxide nanoparticles

Although bone tissue has the ability to heal itself, beyond a certain point, bone defects cannot rebuild themselves, and the challenge is how to promote bone tissue regeneration. Iron oxide nanoparticles (IONPs) are a magnetic material because of their excellent properties, which enable them to play an active role in bone regeneration. This paper reviews the application of IONPs in bone tissue regeneration in recent years, and outlines the mechanisms of IONPs in bone tissue regeneration in detail based on the physicochemical properties, structural characteristics and safety of IONPs. In addition, a bibliometric approach has been used to analyze the hot spots and trends in the field in order to identify future directions. The results demonstrate that IONPs are increasingly being investigated in bone regeneration, from the initial use as magnetic resonance imaging (MRI) contrast agents to later drug delivery vehicles, cell labeling, and now in combination with stem cells (SCs) composite scaffolds. In conclusion, based on the current research and development trends, it is more inclined to be used in bone tissue engineering, scaffolds, and composite scaffolds.

Is Silver the New Gold? A Systematic Review of the Preclinical Evidence of Its Use in Bone Substitutes as Antiseptic

Antibiotic-laden bone substitutes represent a viable option in the treatment of bone and joint infections with bone defects. In particular, the addition of silver ions or silver nanoparticles to bone substitutes to achieve local antiseptic activity could represent a further contribution, also helping to prevent bacterial resistance to antibiotics. An in-depth search of the main scientific databases was performed regarding the use of silver compounds for bone substitution. The available evidence is still limited to the preclinical level: 22 laboratory studies, 2 animal models, and 3 studies, with both in vitro and in vivo analysis, were found on the topic. Numerous biomaterials have been evaluated. In vitro studies confirmed that silver in bone substitutes retains the antibacterial activity already demonstrated in coatings materials. Cytotoxicity was generally found to be low and only related to silver concentrations higher than those sufficient to achieve antibacterial activity. Instead, there are only a few in vivo studies, which appear to confirm antibacterial efficacy, although there is insufficient evidence on the pharmacokinetics and safety profile of the compounds investigated. In conclusion, research on bone substitutes doped with silver is in its early stages, but the preliminary findings seem promising.

Functionalization of PEG-AgNPs Hybrid Material to Alleviate Biofouling Tendency of Polyethersulfone Membrane

Membrane-based processes are a promising technology in water and wastewater treatments, to supply clean and secure water. However, during membrane filtration, biofouling phenomena severely hamper the performance, leading to permanent detrimental impacts. Moreover, regular chemical cleaning is ineffective in the long-run for overcoming biofouling, because it weakens the membrane structure. Therefore, the development of a membrane material with superior anti-biofouling performance is seen as an attractive option. Hydrophilic-anti-bacterial precursor polyethylene glycol-silver nanoparticles (PEG-AgNPs) were synthesized in this study, using a sol-gel method, to mitigate biofouling on the polyethersulfone (PES) membrane surface. The functionalization of the PEG-AgNP hybrid material on a PES membrane was achieved through a simple blending technique. The PES/PEG-AgNP membrane was manufactured via the non-solvent induced phase separation method. The anti-biofouling performance was experimentally measured as the flux recovery ratio (FRR) of the prepared membrane, before and after incubation in E. coli culture for 48 h. Nanomaterial characterization confirmed that the PEG-AgNPs had hydrophilic-anti-bacterial properties. The substantial improvements in membrane performance after adding PEG-AgNPs were evaluated in terms of the water flux and FRR after the membranes experienced biofouling. The results showed that the PEG-AgNPs significantly increased the water flux of the PES membrane, from 2.87 L·m⁻²·h⁻¹ to 172.84 L·m⁻²·h⁻¹. The anti-biofouling performance of the PES pristine membrane used as a benchmark showed only 1% FRR, due to severe biofouling. In contrast, the incorporation of PEG-AgNPs in the PES membrane decreased live bacteria by 98%. It enhanced the FRR of anti-biofouling up to 79%, higher than the PES/PEG and PES/Ag membranes.

Aminopropyltriethoxysilane (APTES)-Modified Nanohydroxyapatite (nHAp) Incorporated with Iron Oxide (IO) Nanoparticles Promotes Early Osteogenesis, Reduces Inflammation and Inhibits Osteoclast Activity

Due to its increased prevalence, osteoporosis (OP) represents a great challenge to health care systems and brings an economic burden. To overcome these issues, treatment plans that suit the need of patients should be developed. One of the approaches focuses on the fabrication of personalized biomaterials, which can restore the balance and homeostasis of disease-affected bone. In the presented study, we fabricated nanometer crystalline hydroxyapatite (nHAp) and iron oxide (IO) nanoparticles stabilized with APTES and investigated whether they can modulate bone cell metabolism and be useful in the fabrication of personalized materials for OP patients. Using a wide range of molecular techniques, we have shown that obtained nHAp@APTES promotes viability and RUNX-2 expression in osteoblasts, as well as reducing activity of critical proinflammatory cytokines while inhibiting osteoclast activity. Materials with APTES modified with nHAp incorporated with IO nanoparticles can be applied to support the healing of osteoporotic bone fractures as they enhance metabolic activity of osteoblasts and diminish osteoclasts’ metabolism and inflammation.

Novel Approach of Phyto-Mediated Thermo-Sensitive and Biocompatible Nano-Formulation to Improve Anti-Microbial Efficacy Against Pathogenic Bacterial for the Treatment of Wound Infections

Design and development of novel methods for the synthesis of metal nanopartilces (MNPs) was greatly attracted by research community due to various applications. We described a greener strategy for the synthesis of silver nanoformulation (Ag NF) using leaf extract of Ziziphus zizyphus and then surface functionalized using P(NIPAM-co-MQ). The synthesized AgNPs were characterized by UV-visible spectroscopy and Transmission electron microscopy. Further, the functionalized AgNPs were characterized XPS and x-ray diffraction studies. The design of bioactive and biocompatible Ag nanoformulation preparations have been provide promising alternative source for bacterial-related therapies. The developed Ag NF have demonstrated predominant bactericidal action with highinhibition rate and long-term efficiency against clinically approved bacterial pathogens (S. aureus and E. coli), which greatly contributed treatment of wound infections. The observations of the present study could provide new avenue for the antimicrobial treatment of wound therapy

Enhanced bone tissue regeneration via bioactive electrospun fibrous composite coated titanium orthopedic implant

One of the very reliable, attractive, and cheapest techniques for synthesizing nanofibers for biomedical applications is electrospinning. Here, we have created a novel nanofibrous composite coated Ti plate to mimic an Extra Cellular Matrix (ECM) of native bone in order to enhance the bone tissue regeneration. An electrospun fibrous composite was obtained by the combination of minerals (Zn, Mg, Si) substituted hydroxyapatite (MHAP)/Polyethylene Glycol (PEG)/Cissus quadrangularis (CQ) extract. Fibrous composite's functionality, phase characteristics, and morphology were evaluated by FT-IR, XRD, and SEM techniques, respectively. The average fiber diameter of MHAP/PVA had decreased from ~274 to ~255 nm after incorporating PEG polymer. That further increased from ~255 to ~275 nm after adding CQ extract. Besides the bioactivity in SBF solution, the degradable nature was confirmed by immersing the fibrous composite in Tris-HCL solution. The degradable studies evaluate that the composite was degraded depending on time, and it degrades about 9.42% after 7 days of immersion. Osteoblasts like MG-63 cells differentiation, proliferation, and calcium deposition were also determined. These results show that this new fibrous composite exhibits advanced osteoblasts properties. Thus, we concluded that this new fibrous scaffold coated Ti implant could act as a better implant to mimic ECM of bone structure and to improve osteogenesis during bone regeneration.

Synthesis, characteristics and medical applications of plant nanomaterials

The recent preparations of metal nanoparticles using plant extracts as reducing agents are summarized here. The synthesis and characterization of plant-metal nanomaterials and the progress in antibacterial and anti-inflammatory medical applications are detailed, providing a new vision for plant-based medical applications. The medical application of plant-metal nanoparticles is becoming a research hotspot. Compared with traditional preparation methods, the synthesis of plant-metal nanoparticles is less toxic and more eco-friendly, increasing application potential. Highly efficient plant-metal nanoparticles are usually smaller than 100 nm. This review describes the synthesis, characterization and bioactivities of gold- and silver-plant nanoparticles as examples and clearly explained their antibacterial and anticancer mechanisms. An analysis of actual cases shows that the synthetic method and type of plant extract affect the activities of the products.

Influence of Hydroxyapatite Surface Functionalization on Thermal and Biological Properties of Poly(l-Lactide)- and Poly(l-Lactide-co-Glycolide)-Based Composites

Novel biocomposites of poly(L-lactide) (PLLA) and poly(l-lactide-co-glycolide) (PLLGA) with 10 wt.% of surface-modified hydroxyapatite particles, designed for applications in bone tissue engineering, are presented in this paper. The surface of hydroxyapatite (HAP) was modified with polyethylene glycol by using l-lysine as a linker molecule. The modification strategy fulfilled two important goals: improvement of the adhesion between the HAP surface and PLLA and PLLGA matrices, and enhancement of the osteological bioactivity of the composites. The surface modifications of HAP were confirmed by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), TGA, and elemental composition analysis. The influence of hydroxyapatite surface functionalization on the thermal and in vitro biological properties of PLLA- and PLLGA-based composites was investigated. Due to HAP modification with polyethylene glycol, the glass transition temperature of PLLA was reduced by about 24.5 °C, and melt and cold crystallization abilities were significantly improved. These achievements were scored based on respective shifting of onset of melt and cold crystallization temperatures and 1.6 times higher melt crystallization enthalpy compared with neat PLLA. The results showed that the surface-modified HAP particles were multifunctional and can act as nucleating agents, plasticizers, and bioactive moieties. Moreover, due to the presented surface modification of HAP, the crystallinity degree of PLLA and PLLGA and the polymorphic form of PLLA, the most important factors affecting mechanical properties and degradation behaviors, can be controlled.

Size-controllable preparation and antibacterial mechanism of thermo-responsive copolymer-stabilized silver nanoparticles with high antimicrobial activity

The emergence of bacterial resistance has become one of the top global concern, and silver nanoparticles (AgNPs) provide alternative strategies for the development of new antimicrobial agent. Herein, three small sizes (1.5-4.0 nm) of well-dispersed AgNPs were successfully synthesized using a thermo-sensitive P(NIPAM-co-MQ) copolymer with coordination ability as a stabilizer. The copolymer stabilized silver nanoparticles (AgNPs@P) displayed good thermo-sensitive characteristics and solution stability at pH = 6.5-8.0. AgNPs@P had high-efficiency and long-term antimicrobial properties for Gram-positive bacteria (S. aureus) and Gram-negative bacteria (E. coli). In particular, AgNPs@P₃ with ultrasmall size (1.59 nm) exhibited better antimicrobial activity against both normal bacteria and antibiotic-resistant bacteria with a very low MIC value of 4.05 μg/mL. Moreover, AgNPs@P also showed an interesting temperature-dependent antibacterial activity mainly owing to the effect of thermo-sensitive copolymer on AgNPs. It was found that the antibacterial activity of the AgNPs@P also was affected by the proportion of copolymer, sizes of AgNPs, and experimental temperature. The antibacterial mechanism of AgNPs@P involved a variety of ways including destroying cell membranes, internalization of AgNPs and generation of ROS. Our research provides a new perspective for the preparation of effective nanosilver antimicrobial agents.

Human mesenchymal stem cells encapsulated-coacervated photoluminescent nanodots layered bioactive chitosan/collagen hydrogel matrices to indorse cardiac healing after acute myocardial infarction

Acute Myocardial Infarction (MI) is one of the foremost causes of human death worldwide and it leads to mass death of cardiomyocytes, interchanges of unfavorable biological environment and affecting electrical communications by fibrosis scar formations, and specifically deficiency of blood supply to heart which leads to heart damage and heart failure. Recently, numerous appropriate strategies have been applied to base on solve these problems wound be provide prominent therapeutic potential to cardiac regeneration after acute MI. In the present study, a combined biopolymeric conductive hydrogel was fabricated with conductive ultra-small graphene quantum dots as a soft injectable hydrogel for cardiac regenerations. The resultant hydrogel was combined with human Mesenchymal stem cells (hMSCs) to improved angiogenesis in cardiovascular tissues and decreasing cardiomyocyte necrosis of hydrogel treated acute-infarcted region has been greatly associated with the development of cardiac functions in MI models. The prepared graphene quantum dots and hydrogel groups was physico-chemically analyzed and confirmed the suitability of the materials for cardiac regeneration applications. The in vitro analyzes of hydrogels with hMSCs have established that enhanced cell survival rate, increased expressions of pro-inflammatory factors, pro-angiogenic factors and early cardiogenic markers. The results of in vivo myocardial observations and electrocardiography data demonstrated a favorable outcome of ejection fraction, fibrosis area, vessel density with reduced infarction size, implying that significant development of heart regenerative function after MI. This novel strategy of injectable hydrogel with hMSCs could be appropriate for the effective treatment of cardiac therapies after acute MI.

Effects of polyethylene glycol content on the properties of a silk fibroin/nano-hydroxyapatite/polyethylene glycol electrospun scaffold

To study the effects of polyethylene glycol (PEG) content on the mechanical properties and degradation of silk fibroin, nano-hydroxyapatite, and PEG (SF/nHAP/PEG) electrospun scaffolds, and according to the PEG ratio in the scaffold (SF : nHAP : PEG), test groups were divided as follows: PEG-0 (10 : 2), PEG-0.5 (10 : 2 : 0.5), PEG-1 (10 : 2 : 1), and PEG-2 (10 : 2 : 2). A series of tests to determine the mechanical properties, degradation rates, and osteogenic characteristics was undertaken. PEG facilitated SF degradation (PEG-1 > PEG-0.5 > PEG-0 > PEG-2), and the mass loss of the scaffolds in PEG-1 was more than 30%, while in PEG-2 it was less than 20% after 8 days (P < 0.05). The addition of PEG strengthened the mechanical properties of the scaffold (PEG-1 > PEG-2 > PEG-0.5 > PEG-0), as the Young's modulus increased from 41.72 ± 3.40 MPa for PEG-0 to 76.12 ± 3.73 MPa for PEG-1 (P < 0.05). PEG was favorable for the osteogenic differentiation of BMSCs (PEG-0.5 > PEG-1 > PEG-2 > PEG-0). The enhancements were attributable to the increased hydrophilicity and nHAP dispersion, as well as to the secondary structure transformation of SF. The PEG content was deemed to be optimal when the SF/nHAP/PEG ratio was equal to 10 : 2 : 1.

Enhancing the cytotoxic efficacy of combined effect of doxorubicin and Cyclosporin encapsulated photoluminescent graphene dotted mesoporous nanoparticles against lung cancer cell-specific drug targeting for the nursing care of cancer patients

In recent years, biological nanomedicine-based biomaterials have an extreme attention for biomedical uses, herein we examined a novel kind advance of photoluminescent Graphene quandum dots encapsulated mesoporous nanoparticles (GND@MSNs) encapsulated by well-known anticancer drugs Doxorubicin (DOX) and Cyclosporin (CsA) for lung carcinoma. Electron microscopic technique exhibit the nanostructure and spherical morphology of GND@MSNs+DOX+CsA with mean size ≈110 nm. Moreover, Dynamic Light Scattering (DLS) exposed that blended GND@MSNs+DOX+CsA nanoparticles were highly stable with extremely negatively charged nanoparticles. Raman investigation was done on the all naturally dynamic nanoparticles containing shed graphene to survey the blend condition of the graphene inside the silica mesoporous nanoparticles. GND@MSNs+DOX+CsA provided an outstanding anti-cancer efficiency against the lung cancer cell lines (i.e., A549 and HEL-299). MTT assay monitored that GND@MSNs, GND@MSNs+DOX and GND@MSNs+DOX+CsA have a robust toxicity behaviour on the A549 and HEL-299 model lung cancer cell lines. Additionally, investigation of the cell death was found on AO-EB, Hoechst 33452 staining and flowcytometry techniques. Furthermore, the DNA damage were confirmed by cell cycle arrest and comet assay. Hence, we suggesting that these GND@MSNs+DOX+CsA could be applied as auspicious drug vesicles for novel lung cancer therapeutic potential and new openings to solve the complexity of lung cancer in the care of cancer patients.

Surface grafting of rare-earth ions doped hydroxyapatite nanorods (HAp:Ln(Eu/Tb)) with hydrophilic copolymers based on ligand exchange reaction: Biological imaging and cancer treatment

Rare-earth ions doped hydroxyapatite nanoparticles (HAp:Ln NPs) have demonstrated to be very promising candidates for biological imaging applications owing to their small size and chemical compositions similar to bone. However, these HAp:Ln NPs with controllable size and morphology should be prepared under hydrothermal treatment with hydrophobic molecules as the protective layers. The hydrophobic nature of these luminescent HAp:Ln NPs largely impeded their applications in biomedical fields. In this study, a novel and effective strategy has been developed for the surface modification of HAp:Ln nanorods through the combination of surface ligand exchange reaction and reversible-addition fragmentation chain transfer (RAFT) polymerization using 2-methacryloyloxyethyl phosphorylcholine (MPC) and itaconic acid (IA) as the monomers. Herein, a small molecule adenosine 5'-monophosphate disodium salt (AMP) that contains a phosphate group and two hydroxyl groups was used to displace the hydrophobic oleic acid on pristine HAp NPs through surface ligand exchange reaction owing to its stronger interaction with HAp NPs. On the other hand, the MPC and IA were introduced on HAp NPs through RAFT polymerization after the chain transfer agent was immobilized on the HAp NPs through the esterification reaction. The poly(IA-MPC) could not only endow the high water dispersibility but also be used for loading anticancer agent cisplatin (CDDP) through coordination interaction. To evaluate their potential biomedical applications, the cell uptake behavior, drug loading capacity and release behavior as well as cell viability of HAp:Ln-AMP-poly(IA-MPC) polymeric composites were examined. We demonstrated that the method developed in this work is very effective for introduction of functional polymers onto HAp:Ln nanorods. The HAp:Ln-AMP-poly(IA-MPC) composites are promising for cell imaging and controlled delivery of CDDP.

From Nano to Micro: using nanotechnology to combat microorganisms and their multidrug resistance

The spread of antibiotic resistance and increasing prevalence of biofilm-associated infections is driving demand for new means to treat bacterial infection. Nanotechnology provides an innovative platform for addressing this challenge, with potential to manage even infections involving multidrug-resistant (MDR) bacteria. The current review summarizes recent progress over the last 2 years in the field of antibacterial nanodrugs, and describes their unique properties, mode of action and activity against MDR bacteria and biofilms. Biocompatibility and commercialization are also discussed. As opposed to the more common division of nanoparticles (NPs) into organic- and inorganic-based materials, this review classifies NPs into two functional categories. The first includes NPs exhibiting intrinsic antibacterial properties and the second is devoted to NPs serving as a cargo for delivering antibacterial agents. Antibacterial nanomaterials used to decorate medical devices and implants are reviewed here as well.

Synthesis of silver nanoparticle-decorated hydroxyapatite (HA@Ag) poriferous nanocomposites and the study of their antibacterial activities

Herein, we demonstrate a facile and green rapid approach for the synthesis of uniform poriferous hydroxylapatite [Ca₁₀(PO₄)₆(OH)₂, HA] and poriferous silver nanoparticle (Ag NPs)-decorated hydroxylapatite (HA@Ag) nanocomposites with excellent antibacterial properties. All the nanocomposites were fully characterized in the solid state via various techniques such as X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), automatic specific surface area and porosity analysis (BET) and field emission scanning electron microscopy (FESEM). The results show that HA has a porous rod-like structure, which the HA@Ag nanocomposites retained, and the surface of HA was loaded with globular-like Ag NPs with an average diameter of about 5.8 nm, which exhibit a well-crystalline state. The experimental parameters such as pH, the molar ratio of HA and Tollens' reagent, and reductant have a significant effect on the size and distribution of the Ag NPs. Moreover, the antimicrobial activities of HA and HA@Ag against Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus) were evaluated via broth dilution, filter paper diffusion, optical density (OD₆₀₀) and electron microscopy observation. The as-prepared HA@Ag nanocomposites exhibit excellent antibacterial activities, especially for S. aureus. The minimum inhibition concentration (MIC) of HA@Ag is only 3.9 μg mL⁻¹.

We demonstrate a facile and green rapid approach for the synthesis of uniform poriferous hydroxylapatite (HA) and poriferous silver nanoparticles (Ag NPs)-decorated hydroxylapatite (HA@Ag) nanocomposites with excellent antibacterial properties.

Influences of ionic liquid and temperature on the tailorable surface morphology of F-apatite nanocomposites for enhancing biological abilities for orthopedic implantation

This report has approached for the green synthesis of morphological controlled novel metal-doped fluorinated apatite/polymeric nanocomposites. The synthesized nanocomposites have investigated for hard tissue engineering and bone substitute applications. The selected fluoro ionic liquid explored the dual performances as fluorine precursor and as a soft template for the morphological development of apatite nanocomposite synthesis. The structural and surface studies (XRD, FTIR, FE-SEM, EDS, AFM, HR-TEM & SAED) confirmed the crystalline and morphological changes of synthesized fluorohydroxyapatite nanostructures at two different reaction temperatures. The fluorinated apatite nanocomposites doped with silver for metal-doped composites, which have effective antibacterial efficacy and favorable biocompatibility. The silver-doped nanocomposites showed excellent antibacterial ability against Staphylococcus aureus and Escherichia coli bacterial pathogens with the uniform release of silver and fluorine ions. These antibacterial performances have systematically tested by the quantitative and qualitative methods. The rod-like fluorinated apatite nanocrystals promote cell adhesion and viability of human osteosarcoma (MG-63) cell lines and these studies compared with the sheet-like apatite nanocomposites. This type of biomedical apatite materials may be a promising material for orthopedic implant and regeneration applications.

Elucidation of one step synthesis of PEGylated CuFe bimetallic nanoparticles. Antimicrobial activity of CuFe@PEG vs Cu@PEG

There is a growing field of research on the physicochemical properties of bimetallic nanoparticles (BMNPs) and their potential use in different applications. Meanwhile, their antimicrobial activity is scarcely reported, although BMNPs can potentially achieve unique chemical transformations and synergetic effects can be presented. Towards this direction a reproducible simple hybrid polyol process under moderate temperature solvothermal conditions has been applied for the isolation of non-oxide contaminated bimetallic CuFe nanoparticles (NPs). 1,2-propylene glycol (PG), tetraethylene glycol (TEG) and polyethylene glycol (PEG 8000), that exhibit different physicochemical properties, have been utilized to regulate the size, structure, composition and the surface chemistry of NPs. The BMNPs were found to be of small crystalline size, 30-45nm, and high hydrophilicity, different wt% percentage of organic coating and variable hydrodynamic size and surface charge. The antimicrobial activity of the BMNPs was evaluated against the bacterial strains B. subtilis, E. coli and fungus S. cerevisiae. The IC₅₀ values for CuFe NPs were found significantly lower compared with Cu NPs of the same size, revealing an enhancement in the antimicrobial activity when iron and copper coexist in the crystal structure. The reactive oxygen species (ROS) production was measured intracellularly and extracellularly by the nitroblue tetrazolium assay in the fungal cultures. No extracellular ROS were measured suggesting that both CuFe and Cu NPs enter the fungal cells during the incubation, also verified by optical imaging of the fungal cells in the presence of NPs. Higher ROS concentrations were generated intracellularly for CuFe NPs supporting different red/ox reaction mechanisms.