Silk fibroin/gelatin–chondroitin sulfate–hyaluronic acid effectively enhances in vitro chondrogenesis of bone marrow mesenchymal stem cells

Macroporous Cell-Laden Gelatin/Hyaluronic Acid/Chondroitin Sulfate Cryogels for Engineered Tissue Constructs

Cryogels are a unique macroporous material for tissue engineering. In this work, we study the effect of hyaluronic acid on the physicochemical properties of cryogel as well as on the proliferation of a 3D model of mesenchymal stem cells. The functional groups of the synthesized cryogels were identified using Fourier transform infrared spectroscopy. With an increase in the content of hyaluronic acid in the composition of the cryogel, an increase in porosity, gel content and swelling behavior was observed. As the hyaluronic acid content increased, the average pore size increased and more open pores were formed. Degradation studies have shown that all cryogels were resistant to PBS solution for 8 weeks. Cytotoxicity assays demonstrated no toxic effect on viability of rat adipose-derived mesenchymal stem cells (ADMSCs) cultured on cryogels. ADMSC spheroids were proliferated on scaffolds and showed the ability of the cryogels to orient cell differentiation into chondrogenic lineage even in the absence of inductive agents. Thus, our results demonstrate an effective resemblance to extracellular matrix structures specific to cartilage-like microenvironments by cryogels and their further perspective application as potential biomaterials.

3D Bioprinted Alginate-Silk-Based Smart Cell-Instructive Scaffolds for Dual Differentiation of Human Mesenchymal Stem Cells

Designing smart bioinks, which can provide multifunctionality and instructive cues to cells, is a current need of the tissue engineering field. Addressing these parameters, this work aims at developing a smart dual 3D bioprinted scaffold that is capable of differentiating human mesenchymal stem cells into two different lineages within the same construct without providing any exogenous cues. Here, biocompatible alginate- and silk-based bioinks were developed to print self-standing structures with the ability of spatially controlled differentiation of the encapsulated hMSCs. We present this proof of concept and have demonstrated a smart design where the incorporation of phosphate groups enhanced the osteogenic differentiation, whereas the addition of silk promoted the chondrogenic differentiation. Altogether, the present work suggests the potential of the developed bioinks for use in creating clinically viable osteochondral grafts.

Chemical synthesis of polysaccharide-protein and polysaccharide-peptide conjugates: A review

Polysaccharides are abundant natural polymers, which in nature are at times covalently modified with peptides and proteins. Polysaccharide-protein or polysaccharide-peptide conjugates, natural or otherwise, may have increased solubility, improved emulsion properties, prolonged circulation time, reduced immunogenicity, and enhanced selectivity for targeting specific tissues compared to native peptides and proteins. In this paper, we will review recent advances in synthetic methods for producing polysaccharide-protein conjugates and discuss their advantages with a focus on drug targeting.

Lipid-Based Drug Delivery Systems in Regenerative Medicine

The most important goal of regenerative medicine is to repair, restore, and regenerate tissues and organs that have been damaged as a result of an injury, congenital defect or disease, as well as reversing the aging process of the body by utilizing its natural healing potential. Regenerative medicine utilizes products of cell therapy, as well as biomedical or tissue engineering, and is a huge field for development. In regenerative medicine, stem cells and growth factor are mainly used; thus, innovative drug delivery technologies are being studied for improved delivery. Drug delivery systems offer the protection of therapeutic proteins and peptides against proteolytic degradation where controlled delivery is achievable. Similarly, the delivery systems in combination with stem cells offer improvement of cell survival, differentiation, and engraftment. The present review summarizes the significance of biomaterials in tissue engineering and the importance of colloidal drug delivery systems in providing cells with a local environment that enables them to proliferate and differentiate efficiently, resulting in successful tissue regeneration.

Technological Advances of 3D Scaffold-Based Stem Cell/Exosome Therapy in Tissues and Organs

Recently, biomaterial scaffolds have been widely applied in the field of tissue engineering and regenerative medicine. Due to different production methods, unique types of three-dimensional (3D) scaffolds can be fabricated to meet the structural characteristics of tissues and organs, and provide suitable 3D microenvironments. The therapeutic effects of stem cell (SC) therapy in tissues and organs are considerable and have attracted the attention of academic researchers worldwide. However, due to the limitations and challenges of SC therapy, exosome therapy can be used for basic research and clinical translation. The review briefly introduces the materials (nature or polymer), shapes (hydrogels, particles and porous solids) and fabrication methods (crosslinking or bioprinting) of 3D scaffolds, and describes the recent progress in SC/exosome therapy with 3D scaffolds over the past 5 years (2016-2020). Normal SC/exosome therapy can improve the structure and function of diseased and damaged tissues and organs. In addition, 3D scaffold-based SC/exosome therapy can significantly improve the structure and function cardiac and neural tissues for the treatment of various refractory diseases. Besides, exosome therapy has the same therapeutic effects as SC therapy but without the disadvantages. Hence, 3D scaffold therapy provides an alternative strategy for treatment of refractory and incurable diseases and has entered a transformation period from basic research into clinical translation as a viable therapeutic option in the future.

Glycosaminoglycans in Tissue Engineering: A Review

Glycosaminoglycans are native components of the extracellular matrix that drive cell behavior and control the microenvironment surrounding cells, making them promising therapeutic targets for a myriad of diseases. Recent studies have shown that recapitulation of cell interactions with the extracellular matrix are key in tissue engineering, where the aim is to mimic and regenerate endogenous tissues. Because of this, incorporation of glycosaminoglycans to drive stem cell fate and promote cell proliferation in engineered tissues has gained increasing attention. This review summarizes the role glycosaminoglycans can play in tissue engineering and the recent advances in their use in these constructs. We also evaluate the general trend of research in this niche and provide insight into its future directions.

Photocrosslinked natural hydrogel composed of hyaluronic acid and gelatin enhances cartilage regeneration of decellularized trachea matrix

Repair of long segmental trachea defects is always a great challenge in the clinic. The key to solving this problem is to develop an ideal trachea substitute with biological function. Using of a decellularized trachea matrix based on laser micropore technique (LDTM) demonstrated the possibility of preparing ideal trachea substitutes with tubular shape and satisfactory cartilage regeneration for tissue-engineered trachea regeneration. However, as a result of the very low cell adhesion of LDTM, an overly high concentration of seeding cell is required, which greatly restricts its clinical translation. To address this issue, the current study proposed a novel strategy using a photocrosslinked natural hydrogel (PNH) carrier to enhance cell retention efficiency and improve tracheal cartilage regeneration. Our results demonstrated that PNH underwent a rapid liquid-solid phase conversion under ultraviolet light. Moreover, the photo-generated aldehyde groups in PNH could rapidly react with inherent amino groups on LDTM surfaces to form imine bonds, which efficiently immobilized the cell-PNH composite to the surfaces of LDTM and/or maintained the composite in the LDTM micropores. Therefore, PNH significantly enhanced cell-seeding efficiency and achieved both stable cell retention and homogenous cell distribution throughout the LDTM. Moreover, PNH exhibited excellent biocompatibility and low cytotoxicity, and provided a natural three-dimensional biomimetic microenvironment to efficiently promote chondrocyte survival and proliferation, extracellular matrix production, and cartilage regeneration. Most importantly, at a relatively low cell-seeding concentration, homogeneous tubular cartilage was successfully regenerated with an accurate tracheal shape, sufficient mechanical strength, good elasticity, typical lacuna structure, and cartilage-specific extracellular matrix deposition. Our findings establish a versatile and efficient cell-seeding strategy for regeneration of various tissue and provide a satisfactory trachea substitute for repair and functional reconstruction of long segmental tracheal defects.

Advanced hydrogels for the repair of cartilage defects and regeneration

Cartilage defects are one of the most common symptoms of osteoarthritis (OA), a degenerative disease that affects millions of people world-wide and places a significant socio-economic burden on society. Hydrogels, which are a class of biomaterials that are elastic, and display smooth surfaces while exhibiting high water content, are promising candidates for cartilage regeneration. In recent years, various kinds of hydrogels have been developed and applied for the repair of cartilage defects in vitro or in vivo, some of which are hopeful to enter clinical trials. In this review, recent research findings and developments of hydrogels for cartilage defects repair are summarized. We discuss the principle of cartilage regeneration, and outline the requirements that have to be fulfilled for the deployment of hydrogels for medical applications. We also highlight the development of advanced hydrogels with tailored properties for different kinds of cartilage defects to meet the requirements of cartilage tissue engineering and precision medicine.

•

The biotechnology of developing hydrogels for cartilage defects repair is promising.

•

The principle for cartilage regeneration using hydrogels and requirements for clinical transformation are summarized.

•

Advanced hydrogels with tailored properties for different kinds of cartilage defects are discussed.

Hyaluronic acid containing scaffolds ameliorate stem cell function for tissue repair and regeneration

Recent evidence based studies have proposed hyaluronic acid (HA) as an emerging biopolymer for various tissue engineering application. Meanwhile, stem cells (SCs) have also gained immense popularity for their tissue regenerative capacity. Thus, combining HA and stem cells for tissue engineering application have shown to foster tissue repair and regeneration process. HA possesses the ability to interact with SCs via cellular surface receptors along with the capacity to elicit the process of differentiation. The influence of HA on stem cells has been widely investigated in cartilage and bone repair but their properties of reducing inflammation has also been explored in various other tissue repair processes. In this review, we have provided an insight to the effect of crosslinked and non-crosslinked HA on various stem cells. Further, HA based scaffolds combined with stem cells have shown to have a synergistic effect in the regeneration capacity. Also, various chemically modified HA and biomolecules conjugated HA as a suitable carrier or matrix for stem cells delivery and the effect of HA in fine tuning the stem cells function is discussed.

Elastin-like polypeptide modified silk fibroin porous scaffold promotes osteochondral repair

Silk fibroin (SF) is considered biocompatible and biodegradable for osteochondral repair. However, it lacks a bioactive domain for cell adhesion, proliferation and differentiation, limiting its therapeutic efficacy. To revamp SF as a biomimicking and bioactive microenvironment to regulate cell behaviours, we engineered an elastin-like polypeptide (ELP, Val-Pro-Gly-Xaa-Gly) to modify SF fibers via simple and green dehydrothermal (DHT) treatment. Our results demonstrated that the ELP successfully bound to SF, and the scaffold was reinforced by the fusion of the silk fiber intersections with ELP (S-ELP-DHT) via the DHT treatment. Both bone mesenchymal stem cells (BMSCs) and chondrocytes exhibited improved spreading and proliferation on the S-ELP-DHT scaffolds. The ex vivo and in vivo experiments further demonstrated enhanced mature bone and cartilage tissue formation using the S-ELP-DHT scaffolds compared to the naked SF scaffolds. These results indicated that a recombinant ELP-modified silk scaffold can mimic three-dimensional (3D) cell microenvironment, and improve bone and cartilage regeneration. We envision that our scaffolds have huge clinical potential for osteochondral repair.

•

Elastin-like polypeptide (ELP) modified silk fibroin (SF) scaffold was developed via dehydrothermal treatment (S-ELP-DHT).

•

The S-ELP-DHT scaffold provided a beneficial cell microenvironment for osteochondral repair.

•

Greater mature bone and cartilage tissue formation were achieved.

•

Improved repair efficacy for articular osteochondral defects was confirmed.

Glycosaminoglycan-Inspired Biomaterials for the Development of Bioactive Hydrogel Networks

Glycosaminoglycans (GAG) are long, linear polysaccharides that display a wide range of relevant biological roles. Particularly, in the extracellular matrix (ECM) GAG specifically interact with other biological molecules, such as growth factors, protecting them from proteolysis or inhibiting factors. Additionally, ECM GAG are partially responsible for the mechanical stability of tissues due to their capacity to retain high amounts of water, enabling hydration of the ECM and rendering it resistant to compressive forces. In this review, the use of GAG for developing hydrogel networks with improved biological activity and/or mechanical properties is discussed. Greater focus is given to strategies involving the production of hydrogels that are composed of GAG alone or in combination with other materials. Additionally, approaches used to introduce GAG-inspired features in biomaterials of different sources will also be presented.

Hybrid and Composite Scaffolds Based on Extracellular Matrices for Cartilage Tissue Engineering

IMPACT STATEMENT

Scaffolds fabricated from extracellular matrix (ECM) derivatives are composed of conducive structures for cell attachment, proliferation, and differentiation, but generally do not have proper mechanical properties and load-bearing capacity. In contrast, scaffolds based on synthetic biomaterials demonstrate appropriate mechanical strength, but the absence of desirable biological properties is one of their main disadvantages. To integrate mechanical strength and biological cues, these ECM derivatives can be conjugated with synthetic biomaterials. Hence, hybrid scaffolds comprising both advantages of synthetic polymers and ECM derivatives can be considered a robust vehicle for tissue engineering applications.

Click functionalized, tissue-specific hydrogels for osteochondral tissue engineering

Osteochondral repair requires the induction of both articular cartilage and subchondral bone development, necessitating the presentation of multiple tissue-specific cues for these highly distinct tissues. To provide a singular hydrogel system for the repair of either tissue type, we have developed biofunctionalized, mesenchymal stem cell-laden hydrogels that can present in situ biochemical cues for either chondrogenesis or osteogenesis by simple click modification of a crosslinker, poly(glycolic acid)-poly(ethylene glycol)-poly(glycolic acid)-di(but-2-yne-1,4-dithiol) (PdBT). After modifying PdBT with either cartilage-specific biomolecules (N-cadherin peptide, chondroitin sulfate) or bone-specific biomolecules (bone marrow homing peptide 1, glycine-histidine-lysine peptide), the biofunctionalized, PdBT-crosslinked hydrogels can selectively promote the desired bone- or cartilage-like matrix synthesis and tissue-specific gene expression, with effects dependent on both biomolecule selection and concentration. Our findings establish the versatility of this click functionalized hydrogel system as well as its ability to promote in vitro development of osteochondral tissue phenotypes.

Comparison of polysaccharides in articular cartilage regeneration associated with chondrogenic and autophagy-related gene expression

Articular cartilage exhibits reduced self-healing following degeneration. This research evaluated the effects of hydrogels derived from various polysaccharides-gellan gum (GG), alginate, and agarose-on cartilage regeneration compared with that of hyaluronic acid (HA), which is commonly used in cartilage tissue engineering. Chondrocytes were isolated from the articular cartilage of New Zealand White (NZW) rabbits and stimulated with IL-1β followed by incubation with polysaccharides. The expressions of NF-κB and Cox-2 were decreased and those of IκBα, Sox-9, aggrecan, and type II collagen were increased in HA, GG, and Alginate groups. Osteochondral defects in NZW rabbits were treated with intra-articular polysaccharide injections; all except alginate resulted in tissue regeneration. Significant improvements were observed in cartilage regeneration in the GG and agarose groups. These results show that GG and agarose improve cartilage regeneration by suppressing inflammatory mediators and inducing cartilage formation and autophagy-related gene expression, indicating their potential for cartilage tissue engineering.

Enhanced chondrogenic differentiation of human mesenchymal stem cells in silk fibroin/chitosan/glycosaminoglycan scaffolds under dynamic culture condition

Cartilage tissue damage and diseases are the most common clinical situation that occurs because of aging and injury, thereby causing pain and loss of mobility. The inability of cartilage tissue to self-repair is instrumental in developing tissue engineered substitutes. To this effect, the present study aims to engineer cartilage construct by culturing umbilical cord blood-derived human mesenchymal stem cells (hMSCs) on novel 3D porous scaffolds developed from natural biopolymers, silk fibroin (SF) and chitosan (CS), with addition of cartilage matrix components, glucosamine (Gl) and chondroitin sulfate (Ch). The presence of Gl and Ch is expected to enhance cartilage regeneration. The developed SF/CS-Gl-Ch scaffolds possess desired pore size in the range 56.55-168.15 μm, 88-92% porosity, 44.7-46.8̊ contact angle, controlled swelling and biodegradability. Upon culturing under dynamic condition in a spinner flask bioreactor, the scaffold supported hMSCs attachment, proliferation, and further promoted chondrogenic differentiation. Cartilage-specific matrix and gene (Collagen II, Sox9 and aggrecan) expression analyses by histology, immunophenotype, immunofluorescence and quantitative PCR studies showed superiority of cell-scaffold construct generated in dynamic culture towards cartilage tissue generation as compared to cell aggregates formed by pellet culture. This study demonstrates the potentiality of SF/CS-Gl-Ch porous scaffold for the development of tissue construct for cartilage regeneration under dynamic culture condition.

Optimization of photocrosslinked gelatin/hyaluronic acid hybrid scaffold for the repair of cartilage defect

There is no therapy currently available for fully repairing articular cartilage lesions. Our laboratory has recently developed a visible light-activatable methacrylated gelatin (mGL) hydrogel, with the potential for cartilage regeneration. In this study, we further optimized mGL scaffolds by supplementing methacrylated hyaluronic acid (mHA), which has been shown to stimulate chondrogenesis via activation of critical cellular signalling pathways. We hypothesized that the introduction of an optimal ratio of mHA would enhance the biological properties of mGL scaffolds and augment chondrogenesis of human bone marrow-derived mesenchymal stem cells (hBMSCs). To test this hypothesis, hybrid scaffolds consisting of mGL and mHA at different weight ratios were fabricated with hBMSCs encapsulated at 20 × 106  cells/ml and maintained in a chondrogenesis-promoting medium. The chondrogenenic differentiation of hBMSCs, within different scaffolds, was estimated after 8 weeks of culture. Our results showed that mGL/mHA at a 9:1 (%, w/v) ratio resulted in the lowest hBMSC hypertrophy and highest glycosaminoglycan production, with a slightly increased volume of the entire construct. The applicability of this optimally designed mGL/mHA hybrid scaffold for cartilage repair was then examined in vivo. A full-thickness cylindrical osteochondral defect was surgically created in the rabbit femoral condyle, and a three-dimensional cell-biomaterial construct was fabricated by in situ photocrosslinking to fully fill the lesion site. The results showed that implantation of the mGL/mHA (9:1) construct resulted in both cartilage and subchondral bone regeneration after 12 weeks, supporting its use as a promising scaffold for repair and resurfacing of articular cartilage defects, in the clinical setting.

Chondroitin sulfate immobilized PCL nanofibers enhance chondrogenic differentiation of mesenchymal stem cells

Cold Atmospheric Plasma (CAP) is used as a promising method in surface modification for immobilization of chondroitin sulfate functional biomacromolecules on PCL nanofibrous substrates for cartilage tissue engineering. The GAG-grafted scaffolds are able to successfully support the attachment and proliferation of mesenchymal stem cells (MSCs). The seeded scaffolds show the chondro-differentiation of MSCs during a 21-days cell culture in a non-differential medium. Expression of SOX9, Collagen10 and Collagen2 proved the chondro-inductive effect of GAG-grafted scaffolds. Besides, no external chondro-genic differential agent was used in the differentiation of MSCs to chondrocyte. The cells passed the last phase of chondrogenesis after 14 days of incubation. Thus, the GAG-fabricated fibrous scaffolds using CAP are potential candidates for cartilage tissue engineering.

Sulfated polysaccharide-based scaffolds for orthopaedic tissue engineering

Given their native-like biological properties, high growth factor retention capacity and porous nature, sulfated-polysaccharide-based scaffolds hold great promise for a number of tissue engineering applications. Specifically, as they mimic important properties of tissues such as bone and cartilage they are ideal for orthopaedic tissue engineering. Their biomimicry properties encompass important cell-binding motifs, native-like mechanical properties, designated sites for bone mineralisation and strong growth factor binding and signaling capacity. Even so, scientists in the field have just recently begun to utilise them as building blocks for tissue engineering scaffolds. Most of these efforts have so far been directed towards in vitro studies, and for these reasons the clinical gap is still substantial. With this review paper, we have tried to highlight some of the important chemical, physical and biological features of sulfated-polysaccharides in relation to their chondrogenic and osteogenic inducing capacity. Additionally, their usage in various in vivo model systems is discussed. The clinical studies reviewed herein paint a promising picture heralding a brave new world for orthopaedic tissue engineering.

Bombyx mori derived scaffolds and their use in cartilage regeneration: a systematic review

For the last two decades, silk has been extensively used as scaffolds in tissue engineering because of its remarkable properties. Unfortunately, the aneural property of cartilage limits its regenerative potential which can be achieved using tissue engineering approach. A lot of research has been published searching for the optimization of silk fibroin (SF) and its blends in order to get the best cartilage mimicking properties. However, according to our best knowledge, there is no systematic review available regarding the use of Bombyx mori derived biomaterials limited to cartilage related studies. This systematic review highlights the in vitro and in vivo work done for the past 7 years on structural and functional properties of B. mori derived biomaterials together with different parameters for cartilage regeneration. PubMed database was searched focusing on in vitro and in vivo studies using the search thread "silk fibroin" and "cartilage". A total of 40 articles met the inclusion criteria. All the articles were deeply studied for cell types, scaffold types and animal models used along with study design and results. Five types of cells were used for in vitro while seven types of cells were used for in vivo studies. Three types of animal models were used for scaffold implantation purpose. Moreover, different types of scaffolds either seeded with cells or supplemented with various factors were explored and discussed in detail. Results suggest the suitability of silk as a better biomaterial because of its cartilage mimicking properties.

Promotion of chondrogenic differentiation of mesenchymal stem cells by copper: Implications for new cartilage repair biomaterials

Copper (Cu) has drawn considerable attention in the design of biomaterials due to its multifunction, such as antibacterial property, osteogenic and angiogenic ability. However, the effect of Cu on chondrogenic differentiation of mesenchymal stem cells (MSCs) and its potential for cartilage repair biomaterials has been rarely studied. Here, we report that Cu can significantly enhance chondrogensis of MSCs. Specifically, in vitro studies showed that Cu could promote MSCs cytoskeleton change, extracellular glycosaminoglycan (GAG) deposition and the chrodrogenic genes (Sox9, Aggrecan, and Col-2) up-regulation. Furthermore, we prepared a Cu-containing alginate (Alg) porous scaffold to assess the chondroinductivity of Cu in vivo. In eight weeks, we found that Alg/Cu scaffolds could induce better formation of new cartilage tissue compared to the pure Alg scaffolds fabricated by the same procedure but without adding Cu. These encouraging results indicate that Cu can bring considerable benefits to the development and application of cartilage repair biomaterials.

Biodiversity of CS–proteoglycan sulphation motifs: chemical messenger recognition modules with roles in information transfer, control of cellular behaviour and tissue morphogenesis

Chondroitin sulphate (CS) glycosaminoglycan chains on cell and extracellular matrix proteoglycans (PGs) can no longer be regarded as merely hydrodynamic space fillers. Overwhelming evidence over recent years indicates that sulphation motif sequences within the CS chain structure are a source of significant biological information to cells and their surrounding environment. CS sulphation motifs have been shown to interact with a wide variety of bioactive molecules, e.g. cytokines, growth factors, chemokines, morphogenetic proteins, enzymes and enzyme inhibitors, as well as structural components within the extracellular milieu. They are therefore capable of modulating a panoply of signalling pathways, thus controlling diverse cellular behaviours including proliferation, differentiation, migration and matrix synthesis. Consequently, through these motifs, CS PGs play significant roles in the maintenance of tissue homeostasis, morphogenesis, development, growth and disease. Here, we review (i) the biodiversity of CS PGs and their sulphation motif sequences and (ii) the current understanding of the signalling roles they play in regulating cellular behaviour during tissue development, growth, disease and repair.

Harnessing chondroitin sulphate in composite scaffolds to direct progenitor and stem cell function for tissue repair

This review details the inclusion of chondroitin sulphate in bioscaffolds for superior functional properties in tissue regenerative applications.

Injectable silk fibroin hydrogels functionalized with microspheres as adult stem cells-carrier systems

Hydrogels are good candidate materials for cell delivery scaffolds because they can mimic the physical, chemical, electrical and biological properties of most of the native tissues. In this study, composite biosynthetic hydrogels were produced by combining the bio-functionality of silk fibroin (SF) with the structural versatility of polyethylene-glycol-diacrylated (PEGDa). The formation of a photopolymerizable PEGDa-SF hydrogel (PSFHy) was optimized for 3D-cell culture. Functionalization of the 3D-PSFHy with protein microspheres (MS) was required to increase the porosity and cell-adhesive properties of the material. Cardiac mesenchymal stem cells, which were cultured within the MS-embedding PSFHy, exhibited good viability and expression of proteins that are characteristic of the initial phases of the cardiac muscle differentiation process. Further, the addition of chondroitin sulfate into the scaffolds improved the cell viability. A cell-preconditioning of the scaffold was also performed, suggesting a potential application of these sponge-like scaffolds for analysing the effects of several extracellular microenvironments, produced by different kinds of cells, on the stem cells fate. The results presented herein highlight on the possibility to use the PSFHys functionalized with MS as stem cell-carrier systems with sponge-like properties, potential ultrasound-imaging contrast agents and controlled biochemical factor delivery.

[Effect of injectable composites of calcium sulfate and hyaluronate in enhancing osteogenesis]

Objective

To fabricate an injectable composite bone substitute with hyaluronic acid (HA) and calcium sulfate and to evaluate the biocompatibility and effect of the composite on cell proliferation, osteogenic differentiation in vitro and osteogenic capability in vivo.

Methods

Calcium sulfate powder was mixed with HA solution, cross-linked HA solution, and phosphate buffer solution (PBS) in a ratio of 2∶1 ( W/ V) to get composites of CA+HA, CA+HAC, and CA. The standard extracts from above 3 materials were prepared according to ISO10993-5, and were used to culture mouse MC3T3-E1 cells. The composite biocompatibility and cell proliferation in different concentrations of extract were tested with cell counting kit-8 (CCK-8). The cells were cultured with standard medium as a control. The optimal concentration was selected for osteogenic differentiation test, and ELISA Kit was used to determine the alkaline phosphatase (ALP), collagen type I (COL-I), and osteocalcin (OCN). The femoral condylar bone defect was made on New Zealand white rabbits and repaired with CA+HA, CA+HAC, and CA. Micro-CT was done to evaluate new bone formation with bone volume/tissue volume (BV/TV) ratio at 6 and 12 weeks. HE staining was used to observe bone formation.

Results

CA+HA and CA+HAC were better in injectability and stability in PBS than CA. The biocompatibility test showed that absorbance ( A) value of CA group was significantly lower than that of control group ( P<0.05) at 6, 12, and 24 hours after culture, but no significant difference was found in A values between CA+HA group or CA+HAC group and control group ( P>0.05). The proliferation test showed 25% and 50% extract of all 3 materials had significantly higher A value than control group ( P<0.05). For 75% and 100% extract, only CA+HA group had significantly higher A value than control group ( P<0.05). And 50% extract was selected for osteogenic differentiation test. At 14 and 21 days, ALP, COL-I and OCN concentrations of CA+HA group and CA+HAC group were significantly higher than those of CA group and control group ( P<0.05). Micro-CT results showed higher BV/TV in CA+HA group and CA+HAC group than CA group at 6 and 12 weeks ( P<0.05), but no significant difference was found between CA+HA group and CA+HAC group ( P>0.05). HE staining revealed that a little bone tissue was seen in CA+HA group and CA+HAC group, but there was no bone formation in CA group at 6 weeks; more streak bone tissue in CA+HA group and CA+HAC group than CA group at 12 weeks.

Conclusion

Composites prepared with calcium sulfate and HA or with cross-linked HA are stable, injectable, and biocompatible. The materials have excellent effect on proliferation and differentiation of mouse MC3T3-E1 cells. They also show good osteogenic capability in vivo. So it is a potential bone substitutes for bone defective diseases.

Microsphere-based scaffolds encapsulating chondroitin sulfate or decellularized cartilage

Extracellular matrix materials such as decellularized cartilage (DCC) and chondroitin sulfate (CS) may be attractive chondrogenic materials for cartilage regeneration. The goal of the current study was to investigate the effects of encapsulation of DCC and CS in homogeneous microsphere-based scaffolds, and to test the hypothesis that encapsulation of these extracellular matrix materials would induce chondrogenesis of rat bone marrow stromal cells. Four different types of homogeneous scaffolds were fabricated from microspheres of poly(D,L-lactic-co-glycolic acid): Blank (poly(D,L-lactic-co-glycolic acid) only; negative control), transforming growth factor-β3 encapsulated (positive control), DCC encapsulated, and CS encapsulated. These scaffolds were then seeded with rat bone marrow stromal cells and cultured for 6 weeks. The DCC and CS encapsulation altered the morphological features of the microspheres, resulting in higher porosities in these groups. Moreover, the mechanical properties of the scaffolds were impacted due to differences in the degree of sintering, with the CS group exhibiting the highest compressive modulus. Biochemical evidence suggested a mitogenic effect of DCC and CS encapsulation on rat bone marrow stromal cells with the matrix synthesis boosted primarily by the inherently present extracellular matrix components. An important finding was that the cell seeded CS and DCC groups at week 6 had up to an order of magnitude higher glycosaminoglycan contents than their acellular counterparts. Gene expression results indicated a suppressive effect of DCC and CS encapsulation on rat bone marrow stromal cell chondrogenesis with differences in gene expression patterns existing between the DCC and CS groups. Overall, DCC and CS were easily included in microsphere-based scaffolds; however, there is a requirement to further refine their concentrations to achieve the differentiation profiles we seek in vitro.

Population doubling level-dependent change of secreted glycosaminoglycan in equine bone marrow-derived mesenchymal stem cells

In regenerative medicine using transplantation of mesenchymal stem cells (MSCs), the importance of regulating the quality of MSCs has been well recognized; however, there is little information concerning the relationship between the population doubling level (PDL) and the stemness of MSCs in equine medicine. In this study, we showed that the amount of glycosaminoglycan (GAG) secreted by bone marrow-derived MSCs (BMSCs) decreases with increase of PDL. Enzymatic digestion and two-dimensional electrophoresis revealed that a main component of GAG produced by BMSCs was hyaluronan with a small amount of chondroitin sulfate. Increase of PDL downregulated the expression of MSC CD markers, including CD44, CD73, CD90, CD105, and CD146, along with loss of differentiation capacity. Thus, the effect of hyaluronan supplement to the growth medium on both expression of CD markers and the tri-lineage potential of BMSCs was evaluated. Expression of CD73 and CD90 was preserved by continuous addition of hyaluronan to the growth medium, whereas mRNA levels corresponding to CD44, CD105 and CD146 were not preserved by supplementation of hyaluronan. BMSCs subcultured with hyaluronan-supplemented growth medium to PDL-12 showed osteogenic capacity, however adipogenic and chondrogenic activities at PDL-12 were not preserved by exogenous hyaluronan. These results suggest that downregulation of CD44, CD105 and CD146 might not affect the osteogenic capacity. Taken together, the results suggested that supplementation of hyaluronan to the growth medium might be effective at maintaining the osteogenic capacity of equine BMSCs.