Iron nanoparticles decorated multi-wall carbon nanotubes modified carbon paste electrode as an electrochemical sensor for the simultaneous determination of uric acid in the presence of ascorbic acid, dopamine and l-tyrosine

Sensitive sensing platform based on Co, Mo doped electrospun nanofibers for simultaneous electrochemical detection of dopamine and uric acid

Abnormal levels of dopamine (DA) and uric acid (UA) in the human body are valuable indicators for monitoring human health, as they are associated with certain diseases. Therefore, it is crucial to develop sensitive and simultaneous analytical techniques for DA and UA in diagnosing the related diseases. Herein, the Co- and Mo- doped carbon nanofibers (Co, Mo@CNFs) electrochemical biosensor was developed successfully for the sensitive and accurate simultaneous detection of DA and UA. A straightforward electrospinning technique followed by a carbonization process was employed for the synthesis of Co, Mo@CNFs, and the encapsulation of Co and Mo within CNFs served to not only prevent nanoparticle agglomeration, thus providing more active sites, but also to facilitate rapid electron transfer. By incorporating Co and Mo into CNFs, the electrocatalytic activity of the modified electrode was greatly improved due to the beneficial conductivity and synergistic effects of transition metals. This enhancement effectively addressed issues such as the overlapping anodic peaks that occur when DA and UA are oxidized concurrently. Due to the mentioned synergistic contributions, the modified Co, Mo@CNFs electrode (Co, Mo@CNFs/GCE) achieved remarkable sensitivity for the simultaneous detection of DA and UA, while also exhibiting strong anti-interference ability. The detection limits for DA and UA were 2.35 nmol L-1 and 0.16 μmol L-1, respectively. We applied the developed Co, Mo@CNFs/GCE electrochemical biosensor to detect DA and UA in 50-fold diluted serum and urine samples. The results affirm the biosensor's reliability and precision. Moreover, the developed Co, Mo@CNFs/GCE biosensor demonstrated excellent performance in simultaneously detecting DA and UA, providing an efficient and dependable detection approach for clinical diagnosis and bioanalysis.

Electro-optical behaviour of CuFe2 O4 @rGO nanocomposite for nonenzymatic detection of uric acid via the electrochemical method

Uric acid (UA) is a blood and urine component obtained as a metabolic by-product of purine nucleotides. Abnormalities in UA metabolism cause crystal deposition as monosodium urate and lead to various diseases such as gout, hyperuricemia, Lesch-Nyhan syndrome, etc. Monitoring these diseases requires a rapid, sensitive, selective, and portable detection approach. Therefore, this study demonstrates the hydrothermal synthesis of CuFe2 O4 /reduced graphene oxide (rGO) nanocomposite for selective detection of UA. After the nanocomposite synthesis, characterization was performed by X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, UV-visible spectrometry, atomic force spectroscopy, scanning electron microscopy, and electrochemical analysis. Furthermore, from the electrochemical analysis using cyclic voltammetry (CV), kinetic studies were carried out by varying the scan rate to obtain the diffusion coefficient, surface concentration, and rate of charge transfer to achieve a calibration curve that indicates the quasi reversible nature of the fabricated electrode with a linear regression coefficient of oxidation (R2 : 0.9992) and reduction (R2 : 0.9971) peaks. Moreover, the fabricated nonenzymatic amperometric sensor to detect UA with a linearity (R2 : 0.9989) of 1-400 μM was highly sensitive (2.75 × 10-4  mAμM-1  cm-2 ) and had a lower limit of detection (0.01231 μM) at pH 7.5 in phosphate-buffered saline solution. Therefore, the CuFe2 O4 /rGO/ITO-based nonenzymatic sensor could detect interfering agents and spiked real bovine serum samples with higher sensitivity and selectivity for UA detection.

A novel atropine electrochemical sensor based on silver nano particle-coated Spirulina platensis multicellular blue-green microalga

In this work, Atropine as the anticholinergic drug was measured using the environmentally friendly sensor. In this regard, Self-cultivated Spirulina platensis with electroless silver was employed as a powder amplifier in carbon paste electrode modification. Also, 1-Hexyl-3 methylimidazolium Hexafluorophosphate (HMIM PF₆) ion liquid as a conductor binder was used in the suggested electrode construction. Atropine determination was investigated by voltammetry methods. According to voltammograms, the electrochemical behavior of atropine depends on pH, and pH 10.0 was used as the optimal condition. Moreover, the diffusion control process for the electro-oxidation of atropine was verified by the scan rate study, so the diffusion coefficient (D∼ 3.0136×10^-4cm²/sec) value was computed from the chronoamperometry study. Furthermore, responses of the fabricated sensor were linear in the concentration range from 0.01 to 800 μM, and the lowest detection limit of the Atropine determination was obtained at 5 nM. Moreover, the stability, reproducibility, and selectivity factors of the suggested sensor were confirmed by the results. Finally, the recovery percentages for atropine sulfate ampoule (94.48-101.58), and water (98.01-101.3) approve of the applicability of the proposed sensor to Atropine determination in real samples.

Investigation of the photoactivation effect of TiO2 onto carbon-clay paste electrode by cyclic voltammetry analysis

In this work, a cyclic voltammetry analysis for the detection of Ascorbic Acid (AA) based on a carbon-clay paste electrode modified with titanium dioxide (CPEA/TiO₂) is presented. The electrochemical sensor was prepared using clay and carbon graphite, mixed with TiO₂ to investigate the electrode behavior towards the detection of AA. Comprehensive characterization approaches including X-ray diffraction (XRD), Selected area electron diffraction (SAED), Transmission electron microscopy (TEM), Fourier transform infra-red spectroscopy (FTIR) were carried out on different samples. The results indicated that, the electrode has been effectively modified, while the electrochemical parameters of AA on CPEA/T_iO₂/UV such as the charge transfer coefficient (α _a ), number of electrons (n) transferred and standard potential were calculated. CPEA/TiO₂/UV exhibit better photoactivity and also higher electronic conductivity under light radiation (100 W). The linear range for AA was determined between 0.150μM and 0.850 μM with the straight-line equation equivalent to I p a ( μ A ) = 2.244 [ A A ] + 1.234 (n = 8, R² = 0.993). The limit of detection was 0.732 μM (3σ) and limit of quantification was 2.440 μM. For the analytical applications, pharmaceutical tablets such as Chloroquine phosphate, Azithromycin and Hydroxychloroquine sulfate were performed. In addition, interference study in the analytical application was performed, and it was found that the electroanalytical method used can be well adopted for simultaneous electrochemical detection of AA and Azithromycin.

GO/ZnO nanocomposite - as transducer platform for electrochemical sensing towards environmental applications

Graphene Oxide-Zinc Oxide (GO-ZnO) - a new nanomaterial that has queued the interest of researchers. Their intriguing promising physical and electrochemical features of electrode material have led to its widespread use in electrochemical sensor applications. GO-ZnO based nanomaterial were extensively exploited in the construction of electrochemical sensors due to their adaptability and distinct qualities. On understanding the structural role of these materials, their modification processes are critical for realizing their full potential. The advancement of technology on new concepts and strategies has revolutionized the field of sensor devices with high sensitivities and selectivity. These tools can test a range of contaminants quickly, accurately, and affordably while performing automated chemical analysis in complicated matrices. This paper highlights the electrochemical transducer surface for sensing various analytes and current research activity on GO-ZnO nanocomposite. Additionally, we talked about current developments in GO-ZnO nanostructured composites to identify relevant analytes (i.e., Nitrophenols, Antibiotic Drugs, Biomolecules). While being used in the laboratory, the majority of produced systems have proven to bring about excellent gains. Their monitoring application still has a long way to go before it is fixed due to problems like technological advancements and multifunctional strategies to get around the challenges for improving the sensing systems.

Biomarkers for Early Diagnosis of Ovarian Carcinoma

The leading cause of gynecological cancer-related morbidity and mortality is ovarian cancer (OC), which is dubbed a silent killer. Currently, OC is a target of intense biomarker research, because it is often not discovered until the disease is advanced. The goal of OC research is to develop effective tests using biomarkers that can detect the disease at the earliest stages, which would eventually decrease the mortality, thereby preventing recurrence. Therefore, there is a pressing need to revisit the existing biomarkers to recognize the potential biomarkers that can lead to efficient predictors for the OC diagnosis. This Perspective covers an update on the currently available biomarkers used in the triaging of OC to gain certain insights into the potential role of these biomarkers and their estimation that are crucial to the understanding of neoplasm progression, diagnostics, and therapy.

Electrochemical Dopamine Biosensor Based on Poly(3-aminobenzylamine) Layer-by-Layer Self-Assembled Multilayer Thin Film

Dopamine (DA) is an important neurotransmitter which indicates the risk of several neurological diseases. The selective determination with low detection limit is necessary for early diagnosis and prevention of neurological diseases associated with abnormal concentration of DA. The purpose of this study is to fabricate a poly(3-aminobenzylamine)/poly(sodium 4-styrenesulfonate) (PABA/PSS) multilayer thin film for use as an electrochemical DA biosensor. The PABA was firstly synthesized using a chemical oxidation method of 3-aminobenzylamine (ABA) monomer with ammonium persulfate (APS) as an oxidant. For electrochemical biosensor, the PABA/PSS thin film was fabricated on fluorine doped tin oxide (FTO)-coated glass substrate using the layer-by-layer (LBL) self-assembly method. The optimized number of bilayers was achieved using SEM and cyclic voltammetry (CV) results. The electroactivity of the optimized LBL thin film toward detection of DA in neutral solution was studied by CV and amperometry. The PABA/PSS thin film showed good sensitivity for DA sensing with sensitivity of 6.922 nA·cm-2·µM-1 and linear range of 0.1-1.0 µM (R2 = 0.9934), with low detection limit of 0.0628 µM, long-term stability and good reproducibility. In addition, the selectivity of the PABA/PSS thin film for detection of DA under the common interferences (i.e., ascorbic acid, uric acid and glucose) was also presented. The prepared PABA/PSS thin film showed the powerful efficiency for future use as DA biosensor in real sample analysis.

Single-Atom Ruthenium Biomimetic Enzyme for Simultaneous Electrochemical Detection of Dopamine and Uric Acid

Single-atom catalysts have attracted numerous attention due to the high utilization of metallic atoms, abundant active sites, and highly catalytic activities. Herein, a single-atom ruthenium biomimetic enzyme (Ru-Ala-C₃N₄) is prepared by dispersing Ru atoms on a carbon nitride support for the simultaneous electrochemical detection of dopamine (DA) and uric acid (UA), which are coexisting important biological molecules involving in many physiological and pathological aspects. The morphology and elemental states of the single-atom Ru catalyst are studied by transmission electron microscopy, energy dispersive X-ray elemental mapping, high-angle annular dark field-scanning transmission electron microscopy, and high-resolution X-ray photoelectron spectroscopy. Results show that Ru atoms atomically disperse throughout the C₃N₄ support by Ru-N chemical bonds. The electrochemical characterizations indicate that the Ru-Ala-C₃N₄ biosensor can simultaneously detect the oxidation of DA and UA with a separation of peak potential of 180 mV with high sensitivity and excellent selectivity. The calibration curves for DA and UA range from 0.06 to 490 and 0.5 to 2135 μM with detection limits of 20 and 170 nM, respectively. Moreover, the biosensor was applied to detect DA and UA in real biological serum samples using the standard addition method with satisfactory results.

Composites of Bimetallic Platinum-Cobalt Alloy Nanoparticles and Reduced Graphene Oxide for Electrochemical Determination of Ascorbic Acid, Dopamine, and Uric Acid

The ultimate aim of this study is to produce a composite of bimetallic platinum-cobalt nanoparticles and reduced graphene oxide (Pt-Co@rGO) based biosensor for the detection of ascorbic acid (AA), dopamine (DA) and uric acid (UA). Those are biologically important molecules with the key functions for the human body. Pt-Co@rGO was synthesized using a microwave-assisted technique and utilized for the production of a highly sensitive and stable electrochemical biosensor. Detailed spectral XPS and Raman analysis, XRD, and TEM/HR-TEM characterization were also studied. Due to the superior activity and excellent conductivity of rGO, well-separated oxidation peaks of these biomolecules is proven by DPV (differential pulse voltammetry) and CV (cyclic voltammetry) measurements. The prepared Pt-Co@rGO-based biosensor showed high electrochemical activity, a broad linear response, high sensitivity, and acceptable limit of detection values for individual and simultaneous determination of AA, DA, and UA, under optimized conditions. The linear range of Pt-Co@rGO was found to be 170-200; 35-1500 and 5-800 µM for AA, DA, and UA, respectively. Moreover, the detection limit of the prepared composite was calculated as 0.345; 0.051; 0.172 µM for AA, DA, and UA, respectively. In the field of electrochemical biosensors, Pt-Co@rGO based sensor is highly promising due to its superior sensitivity and good selectivity properties.

Electrochemical Detection of Dopamine and Serotonin in the Presence of Interferences in a Rotating Droplet System

In this Article, a rotating droplet system is used for simultaneous detection of dopamine and serotonin. Carbon nanoparticles functionalized with sulfonic groups on the electrode surface enables potential discrimination between the neurotransmitters and the most common interferences, whereas the efficient and low-volume hydrodynamic system helps to lower the detection limit toward physiologically relevant concentrations. Here, we present results with a 10 nM limit of detection for serotonin and a 100 nM to 2 μM linear response range from the system in a sample containing an equimolar concentrations of dopamine and serotonin and 0.5 mM concentration of both uric and ascorbic acids. Demonstrating the practical applicability of this method, we measure the concentration of serotonin in 70 μL of mice blood serum samples without additional pretreatment.

A novel electrochemical sensor based on self-assembled platinum nanochains - Multi-walled carbon nanotubes-graphene nanoparticles composite for simultaneous determination of dopamine and ascorbic acid

In this study, platinum nanochains (PtNCs), multi-walled carbon nanotubes (MWCNTs) and graphene nanoparticles (GNPs) were assembled together to form a novel nanocomposite by a facile ultrasonic-assisted blending process. The PtNCs-MWCNTs-GNPs nanocomposite was characterized by high resolution transmission electron microscopy (HR-TEM), energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The nanocomposite was used for the modification of glass carbon electrode (GCE) and simultaneous determination of dopamine (DA) and ascorbic acid (AA) by differential pulse voltammetry (DPV) and cycle voltammetry (CV). Under the optimum conditions, the calibration curves obtained are linear for the currents versus DA and AA concentrations over the range 2.00-50.0 μM and 100-1200 μM, respectively. And the detection limits for DA and AA are 0.500 μM and 10.0 μM, respectively. The detection and quantitative analysis of DA and AA in human serum and vitamin C tablets on PtNCs-MWCNTs-GNPs/GCE gave the recoveries of 104-110% and 101-108% with relative standard deviations (RSD) of 4.36-7.48% and 0.620-2.90%, respectively. The proposed PtNCs-MWCNTs-GNPs composite could provide a new platform for the routine analysis of DA and AA in terms of its good anti-interference ability, excellent reproducibility and repeatability, and feasibility of use.

A novel nonenzymatic hydrogen peroxide amperometric sensor based on Pd@CeO2-NH2 nanocomposites modified glassy carbon electrode

Herein, (3-aminopropyl)triethoxysilane functionalized cerium (IV) oxide (CeO₂-NH₂) supported Pd nanoparticles were synthesized. The nanocomposites were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and High-resolution transmission electron microscopy (HRTEM). The Pd@CeO₂-NH₂ showed better electrocatalytic response to the reduction of H₂O₂ than CeO₂-NH₂. The fabricated sensor exhibited two linear responses to the reduction of H₂O₂. The first one was from 0.001 to 3.276 mM with 0.47 μM of a limit of detection (LOD) (S/N = 3) and excellent sensitivity of 440.72 μA mM^-1 cm^-2 and the second one was from 3.276 to 17.500 mM with the sensitivity of 852.65 μA mM^-1 cm^-2 in the optimum conductions. Also, the sensor exhibited 91% of electrocatalytic activity toward H₂O₂ after having been used for 30 days and the reproducibility was also satisfactory. The sensor response to H₂O₂ was not affected by ascorbic acid, fructose, glycine, dopamine, arginine, mannose, glucose, uric acid, Mg⁺², Ca⁺², and phenylalanine at the studied potential. Also, the fabricated sensor was used to determine H₂O₂ in milk samples. The results show that the constructed sensor can be a promising devise for the determination of H₂O₂ in real samples.

Surface PEGylation of mesoporous silica materials via surface-initiated chain transfer free radical polymerization: Characterization and controlled drug release

As a new type of mesoporous silica materials with large pore diameter (pore size between 2 and 50nm) and high specific surface areas, SBA-15 has been widely explored for different applications especially in the biomedical fields. The surface modification of SBA-15 with functional polymers has demonstrated to be an effective way for improving its properties and performance. In this work, we reported the preparation of PEGylated SBA-15 polymer composites through surface-initiated chain transfer free radical polymerization for the first time. The thiol group was first introduced on SBA-15 via co-condensation with γ-mercaptopropyltrimethoxysilane (MPTS), that were utilized to initiate the chain transfer free radical polymerization using poly(ethylene glycol) methyl ether methacrylate (PEGMA) and itaconic acid (IA) as the monomers. The successful modification of SBA-15 with poly(PEGMA-co-IA) copolymers was evidenced by a series of characterization techniques, including ¹H NMR, FT-IR, TGA and XPS. The final SBA-15-SH- poly(PEGMA-co-IA) composites display well water dispersity and high loading capability towards cisplatin (CDDP) owing to the introduction of hydrophilic PEGMA and carboxyl groups. Furthermore, the CDDP could be released from SBA-15-SH-poly(PEGMA-co-IA)-CDDP complexes in a pH dependent behavior, suggesting the potential controlled drug delivery of SBA-15-SH-poly(PEGMA-co-IA). More importantly, the strategy should be also useful for fabrication of many other functional materials for biomedical applications owing to the advantages of SBA-15 and well monomer adoptability of chain transfer free radical polymerization.

Magnetism-assisted modification of screen printed electrode with magnetic multi-walled carbon nanotubes for electrochemical determination of dopamine

A simple and sensitive dopamine (DA) electrochemical sensor was fabricated based on magnetism-assisted modification of screen printed electrode (SPE) with magnetic multi-walled carbon nanotubes (mMWCNTs). The mMWCNTs modified electrodes (mMWCNTs/SPE) combines the advantages of SPE and the simultaneous contribution of magnetic nanoparticles (MNPs) and MWCNTs, increasing sensitivity and selectivity of DA detection. The linearity was found between 5μM to 180μM, with the limit of detection (LOD) of 0.43μM. In the mean time, this modified electrode exhibited excellent selectivity for DA detection with almost no interference from ascorbic acid (AA), which co-exists with DA in many bio-samples and causes common interference. Finally, this novel electrode has been applied to determine DA concentration in spiked human blood serum and satisfactory recovery was found in the range of 97.43-102.94% with the RSDs of less than 2.27%. This work developed a sensitive and reliable electrochemical analytical method based on mMWCNTs/SPE, which exhibits great potential for diagnosis of the diseases related to DA.

A glassy carbon electrode modified with γ-Ce2S3-decorated CNT nanocomposites for uric acid sensor development: a real sample analysis

γ-Ce₂S₃-decorated multi-walled carbon nanotube nanocomposite (Ce₂S₃-CNT NC) was synthesized by a wet chemical method in basic media.

Facile preparation of poly(methylene blue) modified carbon paste electrode for the detection and quantification of catechin

Free radicals are formed as byproducts of metabolism, and are highly unstable due to the presence of unpaired electrons. They readily react with other important cellular components such as DNA causing them damage. Antioxidants such as (+)-catechin (CAT), neutralize free radicals in the blood stream. Hence there is a need for detection and quantification of catechin concentration in various food sources and beverages. Electro-oxidative properties of catechin were investigated using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). A carbon paste working electrode modified by electropolymerizing methylene blue (MB) was fabricated. Field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) techniques were used to study the surface morphology of the electrode. Quasi-reversible electron transfer reaction occurred at +0.260V through a diffusion controlled process. In comparison to the bare carbon paste electrode (CPE), there was a significant 5.3 times increment in anodic current sensitivity at the modified electrode at physiological pH. Our findings indicate that for the electro-oxidation of CAT, CPE is a better base material for electropolymerization of MB compared to glassy carbon electrode (GCE). Nyquist plot followed the theoretical shape, indicating low interfacial charge transfer resistance of 0.095kΩ at the modified electrode. Calibration plots obtained by DPV were linear in two ranges of 1.0×10^-3 to 1.0×10^-6 and 1.0×10^-7 to 0.1×10^-8M. The limit of detection (LOD) and limit of quantification (LOQ) was 4.9nM and 14nM respectively. Application of the developed electrode was demonstrated by detecting catechin in green tea and spiked fruit juice with satisfactory recoveries. The sensor was stable, sensitive, selective and reproducible.