Application of three-dimensional reduced graphene oxide-gold composite modified electrode for direct electrochemistry and electrocatalysis of myoglobin

Traditional methods and biosensors for detecting disinfection by-products in water: A review

In recent years, pollution caused by disinfection by-products (DBPs) has become a global concern. Initially, there were fewer contaminants, and the mechanism of their generation was unclear; however, the number of contaminants has increased exponentially as a result of rapid industrialization and numerous economic activities (e.q., during the outbreak of COVID-19 a surge in the use of chlorinated disinfectants was observed). DBP toxicity results in various adverse health effects and organ failure in humans. In addition, it profoundly affects other forms of life, including animals, plants, and microorganisms. This review comprehensively discusses the pre-treatment methods of traditional and emerging DBPs and the technologies applied for their detection. Additionally, this paper provides a detailed discussion of the principles, applicability, and characteristics of traditional large-scale instrumentation methods (such as gas/liquid/ion chromatography coupled with mass spectrometry) for detecting DBPs based on their respective detection techniques. At the same time, the design, functionality, classification, and characteristics of rapid detection technologies (such as biosensors) are also detailed and analyzed.

Carbon Nanomaterial-Based Drug Sensing Platforms Using State-of-the- Art Electroanalytical Techniques

Background:

Currently, nanotechnology and nanomaterials are considered as the most popular and outstanding research subjects in scientific fields ranging from environmental studies to drug analysis. Carbon nanomaterials such as carbon nanotubes, graphene, carbon nanofibers etc. and non-carbon nanomaterials such as quantum dots, metal nanoparticles, nanorods etc. are widely used in electrochemical drug analysis for sensor development. Main aim of drug analysis with sensors is developing fast, easy to use and sensitive methods. Electroanalytical techniques such as voltammetry, potentiometry, amperometry etc. which measure electrical parameters such as current or potential in an electrochemical cell are considered economical, highly sensitive and versatile techniques.

Methods:

Most recent researches and studies about electrochemical analysis of drugs with carbon-based nanomaterials were analyzed. Books and review articles about this topic were reviewed.

Results:

The most significant carbon-based nanomaterials and electroanalytical techniques were explained in detail. In addition to this; recent applications of electrochemical techniques with carbon nanomaterials in drug analysis was expressed comprehensively. Recent researches about electrochemical applications of carbon-based nanomaterials in drug sensing were given in a table.

Conclusion:

Nanotechnology provides opportunities to create functional materials, devices and systems using nanomaterials with advantageous features such as high surface area, improved electrode kinetics and higher catalytic activity. Electrochemistry is widely used in drug analysis for pharmaceutical and medical purposes. Carbon nanomaterials based electrochemical sensors are one of the most preferred methods for drug analysis with high sensitivity, low cost and rapid detection.

Carbon Nitride Nanosheet and Myoglobin Modified Electrode for Electrochemical Sensing Investigations

Background:

Carbon-based nanomaterials, especially carbon nitride (C3N4) has attracted tremendous interest in biosensor applications. Meanwhile, the mechanism of redox protein sensing and related electrocatalytic reactions can provide a valid basis for understanding the process of biological redox reaction.

Objective:

The aim of this paper is to construct a new electrochemical enzyme sensor to achieve direct electron transfer of myoglobin (Mb) on CILE surface and display electrocatalytic reduction activity to catalyze trichloroacetic acid (TCA) and H2O2.

Methods:

The working electrode was fabricated based on ionic liquid modified Carbon Paste Electrode (CILE) and C3N4 nanosheets were modified on the CILE surface, then Mb solution was fixed on C3N4/CILE surface and immobilized by using Nafion film. The as-prepared biosensor displayed satisfactory electrocatalytic ability towards the reduction of TCA and H2O2 in an optimum pH 7.0 buffer solution.

Results:

The results indicated that C3N4 modified electrode retained the activity of the enzyme and displayed quasi-reversible redox behavior in an optimum pH 7.0 buffer solution. The electrochemical parameters of the immobilized Mb on the electrode surface were further calculated with the results of the electron transfer number (n) as 1.27, the charge transfer coefficient (α) as 0.53 and the electrontransfer rate constant (ks) as 3.32 s-1, respectively. The Nafion/Mb/C3N4/CILE displayed outstanding electrocatalytic reduction activity to catalyze trichloroacetic acid and H2O2.

Conclusion:

The Nafion/Mb/C3N4/CILE displayed outstanding electrocatalytic reduction, which demonstrated the promising applications of C3N4 nanosheet in the field electrochemical biosensing.

Eight biomarkers on a novel strip for early diagnosis of acute myocardial infarction

Accurate detection of markers in human serum is important in the early diagnosis of acute myocardial infarction (AMI). This work presents a novel eight biomarker strip, which combines dry chemistry with a fluorescence lateral flow assay. Eight AMI markers were employed simultaneously for sensitive detection, including cholesterol (TC), triglyceride (TG), high density lipoprotein cholesterol (HDL-C) and low density lipoprotein cholesterol (LDL-C), uric acid (UA), myoglobin (Myo), creatine kinase-MB (CK-MB), and cardiac troponin I (cTnI). The strip offers the advantages of simple fabrication, convenience, time-saving detection and accurate assessment for AMI. Moreover, the strip possesses acceptable applicability for human serum. This proposed strategy establishes a remarkable platform for the construction of a multi-target detection strip that is feasible for accurate detection for real human serum samples.

Myoglobin- and Hydroxyapatite-Doped Carbon Nanofiber-Modified Electrodes for Electrochemistry and Electrocatalysis

In this paper, a hydroxyapatite (HAp)-doped carbon nanofiber (CNF)-modified carbon ionic liquid electrode (CILE) was prepared and used for the investigation on the direct electrochemistry and electrocatalysis of myoglobin (Mb). HAp nanoparticles were mixed within a polyacrylonitrile (PAN) solution, and a HAp@PAN nanofiber was synthesized by electrospinning process, which was further controlled by carbonization at 800 °C for 2 h in a nitrogen atmosphere to get a HAp@CNF nanocomposite. Various techniques were used to check the physicochemical properties of HAp@CNF. Mb was mixed with a HAp@CNF dispersion solution and casted on the surface of CILE to obtain an electrochemical sensing platform. The direct electrochemistry of Mb on the modified electrode was checked when a pair of enhanced redox waves appeared, indicating the direct electron transfer of Mb. HAp@CNF exhibited high conductivity, good biocompatibility, and large surface area, which was beneficial for Mb immobilization. The modified electrode showed excellent electrocatalytic activity toward the reduction of trichloroacetic acid and sodium nitrite, which was further used to establish a new electroanalytical method. Real samples were analyzed by the proposed method with satisfactory results.

Recent Advances on Electrochemical Sensors for the Detection of Organic Disinfection Byproducts in Water

Irreversible organ damage or even death frequently occurs when humans or animals unknowingly drink contaminated water. Therefore, in many countries drinking water is disinfected to ensure removal of harmful pathogens from drinking water. If upstream water treatment prior to disinfection is not adequate, disinfection byproducts (DBPs) can be formed. DBPs can exist as wide variety of compounds, but up until now, only several typical compounds have drinking water standards attributed to them. However, it is apparent that the range of DBPs present in water can comprise hundreds of compounds, some of which are at high enough concentrations to be toxic or potentially carcinogenic. Hence, it becomes increasingly significant and urgent to develop an accessible, affordable, and durable sensing platform for a broader range and more sensitive detection of DBPs. Compared with well-established laboratory detection techniques, electrochemical sensing has been identified as a promising alternative that will provide rapid, affordable, and sensitive DBP monitoring in remote water sources. Therefore, this Review covers current state-of-the-art development (within the past decade) in electrochemical sensing to detect organic DBPs in water, which covered three major aspects: (1) recognition mechanism, (2) electrodes with signal amplification, and (3) signal read-out techniques. Moreover, comprehensive quality assessments on electrochemical biosensors, including linear detection range, limit of detection (LoD) and recovery, have also been summarized.

Electrochemical performance of myoglobin based on TiO2-doped carbon nanofiber decorated electrode and its applications in biosensing

A new biosensing strategy based on a TiO₂-doped carbon nanofiber (CNF) composite modified electrode was developed. TiO₂@CNF was prepared by electrospinning with further carbonization, before being characterized by various methods and used for electrode modification on the surface of carbon ionic liquid electrode (CILE). Myoglobin (Mb) was further immobilized on the modified electrode surface. The results of ultraviolet-visible (UV-vis) and Fourier transform infrared (FT-IR) spectroscopy showed that Mb maintained its native structure without denaturation in the composite film. Direct electron transfer and the electrocatalytic properties of Mb on the electrode surface were further investigated. A pair of quasi-reversible redox peaks appeared on the cyclic voltammogram, indicating that direct electrochemistry of Mb was realized in the nanocomposite film. This could be attributed to the specific properties of TiO₂@CNF nanocomposite, including a large surface-to-volume ratio, good biocompatibility and high conductivity. Nafion/Mb/TiO₂@CNF/CILE exhibited an excellent electrochemical catalytic ability in the reduction of trichloroacetic acid, NaNO₂ and H₂O₂. All results demonstrated potential applications of TiO₂@CNF in third-generation electrochemical biosensors.

A new biosensing strategy based on a TiO₂-doped carbon nanofiber (CNF) composite modified electrode was developed.

The Use of Liquids Ionic Fluids as Pharmaceutically Active Substances Helpful in Combating Nosocomial Infections Induced by Klebsiella Pneumoniae New Delhi Strain, Acinetobacter Baumannii and Enterococcus Species

This review deals with various microbiological activities of ionic liquids, which constitute the first anti-infective defense against multi-drug-resistant bacteria-with a particular emphasis placed on medicine and pharmacology. The quoted data on the biological activity of ionic liquids including their antimicrobial properties (depending on the type of a cation or an anion) and are discussed in view of possible applications in nosocomial infections. Dedicated attention is given to finding infections with the Klebsiella pneumoniae New Delhi strain, Acinetobacter baumannii, and Enterococcus species, which are responsible for the induction of antibiotic resistance in intensive care units. Diagnosis and treatment using current antibiotics is a significant problem in hospital care, and the relevant burden on the health systems of the European Union member states induces the search for new, effective methods of treatment. Ionic liquids, due to their antibacterial effect, can be considered topical and general medications and may provide the basis for treatment to eliminate the antibiotic resistance phenomenon in the future. At present, the number of infections with resistant pathogens in hospitals and outpatient clinics in the European Union is growing. In 2015⁻2017, a significant incidence of respiratory and bloodstream infections with bacteria resistant to antibiotics from the 3rd generation group of cephalosporins, glycopeptides, and carbapenems were observed. The paper presents examples of synthesized bifunctional salts with at least one pharmaceutically active ion in obtaining a controlled release, controlled delivery, and biological impact on the pathogenic bacteria, viruses and fungi. The ionic liquids obtained in the presented way may find applications in the treatment of wounds and infections.

Construction of myoglobin–amphiphilic alginate caprylamide–graphene composite modified electrode for the direct electron transfer between redox proteins and electrode and electrocatalysis of myoglobin

To achieve the dispersion of the hydrophobic graphene (GR), the amphiphilic alginate caprylamide (ACA) was synthesized to fabricate electroactive Nafion/Mb–ACA–GR/CILE for the accurate determination of trichloroacetic acid (TCA). SEM observation, FT-IR and UV-Vis spectroscopic analysis indicated that ACA could tightly immobilize Mb and GR on the electrode surface by constructing biointerfaces, which not only provided Mb a suitable microenvironment to maintain its biological activity, but also shortened the distances between the active centers of Mb with carbon ionic liquid electrode (CILE), thus promoting the electron transfer rate. The electrochemical characterization of Nafion/Mb–ACA–GR/CILE showed that the direct electron transfer of Mb was realized on the modified electrode, which was attributed to the high electrical conductivity and excellent electrocatalytic activity of GR and good biocompatibility of ACA. Moreover, Nafion/Mb–ACA–GR/CILE exhibited good electrocatalytic activity towards TCA with the linear range from 2.5 to 47.3 mmol L⁻¹ and lower K_M^app value of 8.3 mmol L⁻¹. Moreover, the modified electrode also revealed good stability, reproducibility and accurate detection of tap-water, exhibiting great potential for the applications as the third-generation electrochemical biosensors.

To achieve the dispersion of the hydrophobic graphene (GR), the amphiphilic alginate caprylamide (ACA) was synthesized to fabricate electroactive Nafion/Mb–ACA–GR/CILE for the accurate determination of trichloroacetic acid (TCA).

Electrochemical Aptasensor for Myoglobin-Specific Recognition Based on Porphyrin Functionalized Graphene-Conjugated Gold Nanocomposites

In this work, a novel electrochemical aptasensor was developed for sensitive and selective detection of myoglobin based on meso-tetra (4-carboxyphenyl) porphyrin-functionalized graphene-conjugated gold nanoparticles (TCPP–Gr/AuNPs). Due to its good electric conductivity, large specific surface area, and excellent mechanical properties, TCPP–Gr/AuNPs can act as an enhanced material for the electrochemical detection of myoglobin. Meanwhile, it provides an effective matrix for immobilizing myoglobin-binding aptamer (MbBA). The electrochemical aptasensor has a sensitive response to myoglobin in a linear range from 2.0 × 10⁻¹¹ M to 7.7 × 10⁻⁷ M with a detection limit of 6.7 × 10⁻¹² M (S/N = 3). Furthermore, the method has the merits of high sensitivity, low price, and high specificity. Our work will supply new horizons for the diagnostic applications of graphene-based materials in biomedicine and biosensors.