A stimuli-responsive and bioactive film based on blended polyvinyl alcohol and cashew gum polysaccharide

In-situ biosynthesized plant exudate gums‑silver nanocomposites as corrosion inhibitors for mild steel in hydrochloric acid medium

Natural gums due to availability, multifunctionality, and nontoxicity are multifaceted in application. In corrosion inhibition applications, their performance, in unmodified form is unsatisfactory because of high hydration rate, solubility issues, algal and microbial contamination, as well as thermal instability. This work attempts to enhance the inhibitive performance of Berlinia grandiflora (BEG) and cashew (CEG) exudate gums through various modification approaches. The potential of biogenic BEG and CEG gums-silver (Ag) nanocomposites (NCPs) for corrosion inhibition of mild steel in 1 M HCl is studied. The nanocomposites were characterized using the FTIR, UV-vis, and TEM techniques. The corrosion studies through the gravimetric and electrochemical (PDP, EIS, LPR, and EFM) analyses reveal moderate inhibition performance by the nanocomposites. Furthermore, the PDP results reveal that both inhibitors are mixed-type with maximum corrosion inhibition efficiencies (IEs) of 61.2 % and 54.2 % for BEG-Ag NCP and CEG-Ag NCP, respectively at an optimum concentration of 1.0 %. Modification of these inhibitors with iodide ion (KI) significantly increased the IE values to 90.1 % and 88.5 % for BEG-Ag NCP and CEG-Ag NCP at the same concentration. Surface observation of the uninhibited and inhibited steel samples using SEM/EDAX, 3D Surface profilometer, and AFM affirm that the modified nanocomposites are highly effective.

On the Unique Morphology and Elastic Properties of Multi-Jet Electrospun Cashew Gum-Based Fiber Mats

This study investigates the unique morphology and mechanical properties of multi-jet electrospun cashew gum (CG) when combined with high-molecular-weight polyethylene oxide (PEO) and glycerol. Cashew gum (CG) is a low-cost, non-toxic heteropolysaccharide derived from Anacardium occidentale trees. Initially, the electrospinnability of aqueous solutions of cashew gum alone or in combination with PEO was evaluated. It was found that cashew gum alone was not suitable for electrospinning; thus, adding a small quantity of PEO was needed to create the necessary molecular entanglements for fiber formation. By using a single emitter with a CG:PEO ratio of 85:15, straight and smooth fibers with some defects were obtained. However, additional purification of the cashew gum solution was needed to produce more stable and defect-free straight and smooth fibers. Additionally, the inclusion of glycerol as a plasticizer was required to overcome material fragility. Interestingly, when the optimized formulation was electrospun using multiple simultaneous emitters, thicker aligned fiber bundles were achieved. Furthermore, the resulting oriented fiber mats exhibited unexpectedly high elongation at break under ambient conditions. These findings underscore the potential of this bio-polysaccharide-based formulation for non-direct water contact applications that demand elastic properties.

Light-Induced Self-Assembled Polydiacetylene/Carbon Dot Functional "Honeycomb"

The design of functional supramolecular assemblies from individual molecular building blocks is a fundamental challenge in chemistry and material science. We report on the fabrication of "honeycomb" films by light-induced coassembly of diacetylene derivatives and carbon dots. Specifically, modulating noncovalent interactions between the carbon dots, macrocyclic diacetylene, and anthraquinone diacetylene facilitates formation of thin films exhibiting a long-range, uniform pore structure. We show that light irradiation at distinct wavelengths plays a key role in the assembly process and generation of unique macro-porous morphology, by both initiating interactions between the carbon dots and the anthraquinone moieties and giving rise to the topotactic polymerization of the polydiacetylene network. We further demonstrate utilization of the macro-porous film as a photocatalytic platform for water pollutant degradation and as potential supercapacitor electrodes, both applications taking advantage of the high surface area, hydrophobicity, and pore structure of the film.

Production of anti-inflammatory films based on cashew gum polysaccharide and polyvinyl alcohol for wound dressing applications

In the present study, we aimed to produce CGP/PVA films containing entrapped anti-inflammatory drugs for wound dressing applications. Using a 33-1 fractional factorial design, the effect of each component was evaluated on the physicochemical and morphological properties of the produced materials. The best formulation for entrapment of diclofenac sodium and ketoprofen was also determined. The produced films presented high swelling capacity, with some formulations showing o porous structure. CGP/PVA films showed a maximum retention of 75.6% for diclofenac sodium and 32.2% for ketoprofen, and both drugs were released in a controlled manner for up to 7 h. The drug release kinetic was studied, and the data were fitted using a Korsmeyer-Peppas model, which suggested that the release mechanism is controlled by diffusion. These results indicate that CGP/PVA-based matrices have great potential to be used as drug-delivery systems for wound dressing applications, contributing to prolonging the drug's action time and then improving their anti-inflammatory efficacy.

Starch- and carboxymethyl cellulose-based films as active beauty masks with papain incorporation

This work aimed to evaluate the effects of the incorporation of papain in biopolymeric-based beauty face masks with exfoliation activity of the skin. The masks were produced by casting with starch and carboxymethyl cellulose blend (50:50 weight percentages). The macro and microstructure, protein distribution, thickness, moisture content, water contact angle, solubility matter, and mechanical properties were evaluated. Moreover, the in vitro proteolytic and exfoliation activity and storage stability were also evaluated. The films with papain had a more concise matrix which provided higher mechanical properties and lower water solubility when compared to the control film (without papain). Films with 1, 2, and 5 % of papain had enzymatic activity for casein and porcine skin substrates. The micrographs of porcine skin treated with 2 and 5 % of papain showed more difference when compared to the control sample, indicating the enzymatic exfoliation. Differently from the solution of papain, the enzyme that was immobilized in the films maintained its activity for up 90 days during the storage stability assay. Based on the physicochemical properties and proteolytic activities, the films preserved the exfoliation activity of papain and have interesting characteristics to act as beauty masks in the cosmetic field.

Drug-Loaded Biocompatible Chitosan Polymeric Films with Both Stretchability and Controlled Release for Drug Delivery

Chitosan is a natural polysaccharide with the advantageous qualities of biocompatibility and biodegradability, and it has recently been spotlighted as a soft material for a sustainable society. Advantages such as these are in demand for application in various biomaterials. Although extensive studies have been conducted on the preparation of chitosan films, overcoming the problems of weak mechanical properties remains a significant barrier. In the present study, we developed stretchable doxorubicin-loaded biocompatible chitosan films by adding acetic acid in controlled concentrations. The stretchable properties of doxorubicin-loaded chitosan film at various concentrations of acetic acid were measured. Elongation to the point of breakage reached 27% with a high concentration of acetic acid, which could be described as high stretchability. The release ratio of doxorubicin from chitosan film reached 70% with a high acetic acid concentration. The cytotoxicity of doxorubicin-loaded chitosan films was measured, and cancer spheroids had completely collapsed after 7 days. According to the results of skin permeability testing, use of the doxorubicin-loaded chitosan film is a plausible choice for a drug sealant.

Preparation and characterization of a novel hamada scoparia polysaccharide composite films and evaluation of their effect on cutaneous wound healing in rat

This work was intended to prepare biodegradable and edible films from polysaccharide extracted from Hammada scoparia leaves (named PSP) and reinforced by poly (vinyl alcohol) (PVA). Four films with different ratios of PSP/PVA: P1 (70:30), P2 (50:50), FP3 (30:70) and pure PVA (100 % PVA) were prepared and characterized in terms of structural (FT-IR), physical (Thickness, solubility and swelling index), optical and thermal properties (TGA). The antioxidant activities of different films were determined in vitro and evaluated in vivo through the examination of wound healing capability. Data revealed that the film P1 displayed the highest antioxidant activity in vitro and accelerated significantly the wound healing, after sixteen days of treatment, attested by higher wound appearance scores and a higher content of collagen (765.924 ± 4.44 mg/g of tissue) confirmed by histological examination, when compared with control, CYTOL CENTELLA® and pure PVA-treated groups. Overall, these results demonstrated that PSP/PVA based films exhibited a higher wound healing potential confirmed with the high antioxidant activities in vitro.

Design of Switchable Enzyme Carriers Based on Stimuli-Responsive Porous Polymer Membranes for Bioapplications

Design of efficient enzyme carriers, where enzymes are conjugated to supports, has become an attractive research avenue. Immobilized enzymes are advantageous for practical applications because of their convenience in handling, ease of separation, and good reusability. However, the main challenge is that these traditional enzyme carriers are unable to regulate the enzymolysis efficiency or to protect the enzymes from proteolytic degradation, which restricts their effectiveness of enzymes in bioapplications. Enlightened by the stimuli-responsive channels in the natural cell membranes, conjugation of the enzymes within flat-sheet stimuli-responsive porous polymer membranes (SR-PPMs) as artificial cell membranes is an efficient strategy for circumventing this challenge. Controlled by the external stimuli, the multifunctional polymer chains, which are incorporated within the membranes and attached to the enzyme, change their structures to defend the enzyme from the external environmental disturbances and degradation by proteinases. Specifically, smart SR-PPM enzyme carriers (SR-PPMECs) not only permit convective substrate transfer through the accessible porous network, dramatically improving enzymolysis efficiency due to the adjustable pore sizes and the confinement effect, but they also act as molecular switches for regulating its permeability and selectivity. In this review, the concept of SR-PPMECs is presented. It covers the latest developments in design strategies of flat-sheet SR-PPFMs, fabrication protocols of SR-PPFMECs, strategies for the regulation of enzymolysis efficiency, and their cutting-edge bioapplications.

Cashew Gum Polysaccharide Nanoparticles Grafted with Polypropylene Glycol as Carriers for Diclofenac Sodium

This investigation focuses on the development and optimization of cashew gum polysaccharide (CGP) nanoparticles grafted with polypropylene glycol (PPG) as carriers for diclofenac sodium. The optimization of parameters affecting nanoparticles formulation was performed using a central composite rotatable design (CCRD). It was demonstrated that the best formulation was achieved when 10 mg of CGP was mixed with 10 μL of PPG and homogenized at 22,000 rpm for 15 min. The physicochemical characterization evidenced that diclofenac was efficiently entrapped, as increases in the thermal stability of the drug were observed. The CGP-PPG@diclofenac nanoparticles showed a globular shape, with smooth surfaces, a hydrodynamic diameter around 275 nm, a polydispersity index (PDI) of 0.342, and a zeta potential of -5.98 mV. The kinetic studies evidenced that diclofenac release followed an anomalous transport mechanism, with a sustained release up to 68 h. These results indicated that CGP-PPG nanoparticles are an effective material for the loading/release of drugs with similar structures to diclofenac sodium.

Stimuli-responsive natural gums-based drug delivery systems for cancer treatment

Chemotherapy as the main cancer treatment method has non-specific effects and various side-effects. Accordingly, significant attempts have been conducted to enhance its efficacy through design and development of "smart" drug delivery systems (DDSs). In this context, natural gums, as a nice gift by the nature, can be exploited as stimuli-responsive DDSs for cancer treatment in part due to their renewability, availability, low cost, bioactivity, biocompatibility, low immunogenicity, biodegradability, and acceptable stability in both in vitro and in vivo conditions. However, some shortcomings (e.g., poor mechanical properties and high hydration rate) restrict their biomedical application ranges that can be circumvented through modification process (e.g., grafting of stimuli-responsive polymers or small molecules) to obtain tailored biomaterials. This review article aimed to compile the stimuli-responsive DDSs based on natural gums. In addition, different types of stimuli, the fundamental features of natural gums, as well as their chemical modification approaches are also shortly highlighted.

Falkenbergia rufolanosa polysaccharide - Poly(vinyl alcohol) composite films: A promising wound healing agent against dermal laser burns in rats

This work was conducted to evaluate the compatibility between physicochemical, antioxidant and morphological properties of polysaccharide (FRP) extracted from red marine alga Falkenbergia rufolanosa reinforced by poly (vinyl alcohol) (PVA) composed films at different ratios of FRP/PVA: F1 (70:30), F2 (50:50), F3 (30:70) and PVA (100% PVA) and the potential wound healing effects. As assessed, FRP/PVA prepared films were heterogeneous, slightly opaque with a rough surface as ascertained by Fourier transform infrared spectroscopy, scanning electron microscopy and colorimetric parameters. Even, X-ray diffraction and glass transition results revealed a semi-crystalline structure of FRP composed films which decreased with increasing PVA ratios. The antioxidant activities of composite films depicted that F1 exhibited the highest antioxidant activity in vitro. Therefore, F1 was found to promote significantly the wound healing, after eight days of treatment, evidenced by higher wound appearance scores and a higher content of collagen (885.12 ± 20.35 mg/g of tissue) confirmed by histological examination, when compared with control, CYTOL BASIC® and PVA-treated groups. All together, the marine-derived polysaccharide gave a substantial pledge for the development of biodegradable films as a potent antioxidant material and a promising agent for tissue regeneration.

Use of Statistical Design Strategies to Produce Biodegradable and Eco-Friendly Films from Cashew Gum Polysaccharide and Polyvinyl Alcohol

This work reports the production and characterization of biodegradable and eco-friendly films based on cashew gum polysaccharide (CGP) and polyvinyl alcohol (PVA), using the statistical design strategy. Results show that CGP/PVA films are pH stimuli-responsive, allowing their use in a magnitude of biotechnological applications. The morphological and dimensional characterization evidences a positive influence of polymers in the dimensional properties. In addition, the microstructural analysis shows that films have different morphologies depending on the content of polymers and oxidant agent. On the other hand, the thickness and light transmission values are positively influenced by CGP and PVA and negatively influenced by NaIO₄. Results from mechanical properties show that the traction force is positively influenced by NaIO₄, while the elongation is only affected by the PVA concentration. In summary, considering the morphological, optical and mechanical properties of the CGP/PVA films it is possible to suggest their utilization in different fields as promising packaging materials or matrices for immobilization and/or encapsulation of biomolecules.

Cashew gum and inulin: New alternative for ginger essential oil microencapsulation

This study aimed to evaluate the effect of partial replacement of cashew gum by inulin used as wall materials, on the characteristics of ginger essential oil microencapsulated by spray drying with ultrasound assisted emulsions. The characterization of particles was evaluated as encapsulation efficiency and particle size. In addition, the properties of the microcapsules were studied through FTIR analysis, adsorption isotherms, thermal gravimetric analysis, X-ray and scanning electron microscopy. It was found that the solubility of the treatments was affected by the composition of the wall material and reached higher values (89.80%) when higher inulin concentrations were applied. The encapsulation efficiency (15.8%) was lower at the highest inulin concentration. The particles presented amorphous characteristics and treatment with cashew gum as encapsulant exhibited the highest water absorption at high water activity. The cashew gum and inulin matrix (3:1(w/w) ratio) showed the best characteristics regarding the encapsulation efficiency and morphology, showing no cracks in the structure.

Gums' based delivery systems: Review on cashew gum and its derivatives

The development of delivery systems using natural polymers such as gums offers distinct advantages, such as, biocompatibility, biodegradability, and cost effectiveness. Cashew gum (CG) has rheological and mucoadhesive properties that can find many applications, among which the design of delivery systems for drugs and other actives such as larvicide compounds. In this review CG is characterized from its source through to the process of purification and chemical modification highlighting its physicochemical properties and discussing its potential either for micro and nanoparticulate delivery systems. Chemical modifications of CG increase its reactivity towards the design of delivery systems, which provide a sustained release effect for larvicide compounds. The purification and, the consequent characterization of CG either original or modified are of utmost importance and is still a continuing challenge when selecting the suitable CG derivative for the delivery of larvicide compounds.