Development of ammonia sensors by using conductive polymer/hydroxyapatite composite materials

Calcium Orthophosphate (CaPO4) Containing Composites for Biomedical Applications: Formulations, Properties, and Applications

The goal of this review is to present a wide range of hybrid formulations and composites containing calcium orthophosphates (abbreviated as CaPO4) that are suitable for use in biomedical applications and currently on the market. The bioactive, biocompatible, and osteoconductive properties of various CaPO4-based formulations make them valuable in the rapidly developing field of biomedical research, both in vitro and in vivo. Due to the brittleness of CaPO4, it is essential to combine the desired osteologic properties of ceramic CaPO4 with those of other compounds to create novel, multifunctional bone graft biomaterials. Consequently, this analysis offers a thorough overview of the hybrid formulations and CaPO4-based composites that are currently known. To do this, a comprehensive search of the literature on the subject was carried out in all significant databases to extract pertinent papers. There have been many formulations found with different material compositions, production methods, structural and bioactive features, and in vitro and in vivo properties. When these formulations contain additional biofunctional ingredients, such as drugs, proteins, enzymes, or antibacterial agents, they offer improved biomedical applications. Moreover, a lot of these formulations allow cell loading and promote the development of smart formulations based on CaPO4. This evaluation also discusses basic problems and scientific difficulties that call for more investigation and advancements. It also indicates perspectives for the future.

Nano-friction behavior and deformation study of hydroxyapatite in ultra-precision polishing process

CONTEXT

In order to study the effect of ultra-precision machining on the surface quality of hydroxyapatite semiconductor materials as well as the material removal mechanism of hydroxyapatite, the mechanical polishing behaviors of hydroxyapatite at different polishing depths were studied by molecular dynamics method. The results show that the subsurface damage of hydroxyapatite increases with increasing polishing depth. The polishing temperature and the polishing force showed a positive correlation with the polishing depth, and the variation of the polishing force was related to the accumulation-release effect of the potential energy of hydroxyapatite material. In addition, the variation of stresses in hydroxyapatite during polishing is mainly influenced by the thermal softening effect. With a smaller polishing depth, the hydroxyapatite semiconductor material has fewer structural defects, fewer atoms undergoing phase transitions, lower surface roughness, and better surface quality. Therefore, to ensure the long-lasting service life of hydroxyapatite semiconductor materials, a small polishing depth should be used in ultra-precision machining. Additionally, this study also provides a theoretical reference for future research on the mechanical properties of hydroxyapatite-based composites.

METHODS

A Large-Scale Atomic/Molecular Parallel Simulator (LAMMPS) was utilized to perform molecular dynamics simulations. The output was visualized and analyzed by the Open Visualization Tools (OVITO) software. The intermolecular interactions were described by the polymer consistent force-field and the 12/6 Lennard-Jones potential functions. The workpiece was polished under a micro-canonical ensemble with the temperature settled at 300 K. Periodic boundary conditions were adopted and the velocity-Verlet algorithm was used to integrate the atomic motion with a timestep of 0.1 femtoseconds (fs).

Urinary bio-monitoring of aromatic amine derivatives by new needle trap device packed with the multi-component adsorbent

Aromatic amines are a large group of chemical compounds that have attracted the attention of researchers due to their toxicity and carcinogenicity. This study aimed to develop an efficient method for sampling and analysis of aromatic amines (Aniline, N, N-dimethylaniline, 2-chloroaniline, and 3-chloroaniline) from the vapour phase (headspace) of urine samples. For the implementation of this plan, a needle trap device packed with the three-component adsorbent consisting of nano-Hydroxy Apatite (nHA), Zeolite (Ze), and Metal-Organic Framework (MOF) equipped with GC-FID was employed for the first phase. Examination of the prepared adsorbents was performed by FT-IR, PXRD, and FE-SEM techniques. The optimal value of considerable parameters such as time and temperature of extraction, salt content, and pH were established using the Response Surface Methodology-Central Composite Design (RMS-CCD) method. In this way, the optimal extraction of targeted analytes was accomplished in 41 min at 41 °C with NaCl content of 33.0% (w/v) and pH: 13.0, respectively. Also, the repeatability and reproducibility of the method were calculated to be in the range of 2.2-7.1% and 3.9-8.1%, respectively, which indicates the acceptable precision of the method. Also, the limit of detection (LOD) and limit of quantification (LOQ) were determined in the range of 0.3-32.0 ng.L^-1 and 0.8-350.0 ng.L^-1, respectively, which proves the high sensitivity of the proposed method. Furthermore, the recovery percent of the extracted analytes was concluded in the range of 97.0-99.0% after 6 and 30 days of the sampling and storage at 25 °C and 4 °C, respectively. Finally, the designed procedure was employed in the analysis of the above-mentioned aromatic amines in the real urine samples. The achieved results illustrate that the three-component absorbent system (nHA;Ze;MOF@NTD) can be introduced as an efficient, fast-response, sensitive, and versatile procedure for trace analysis of the different aromatic amine compounds in public and occupational health.

Changes in the morphology, mechanical strength and biocompatibility of polymer and metal/polymer fabricated hydroxyapatite for orthopaedic implants: a review

Hydroxyapatite (HAp) is a well-known bioceramic known for its high biocompatibility and good bioactivity. The structure of HAp mimics the natural bone structure and thus, it is widely used as implants for hard tissues. Despite possessing the above properties, it lacks mechanical strength, is susceptible to the growth of microbes over time and has low degradability. Polymers can be synthetic or natural. They can be a better choice to be used as additives to improve the properties of HAp due to its better mechanical strength and high biodegradability. A combination of metals and polymers together can overcome the drawbacks of HAp to a greater extent. This review article deals with different polymers and metal/polymer fabricated HAp to show the changes in the properties of HAp following the substitution. It also deals with how better they could be used as a hard tissue implant.

Direct Current Stimulation for Improved Osteogenesis of MC3T3 Cells Using Mineralized Conductive Polyaniline

Hydroxyapatites (HAPs) are usually coated on the surface of an implant to improve the osseointegration with defect bone tissue. Besides, conducting polymers have the advantages of good conductivity, reasonable biocompatibility, and easy of modification, which endow them applicable to electrical stimulation therapy. However, it still remains a great challenge to fabricate hybrid coating combing HAP with conducting polymer on implant surface efficiently. In this work, phytic acid-doped polyaniline (PANI) were successfully synthesized on medical titanium (Ti) sheets. By virtue of the abundant anodic phosphoric groups of phytic acid, HAP nanocrystals were biomineralized on PANI. The PANI-HAP hybrid layer exhibits good cell compatibility with MC3T3 cells. More importantly, HAP nanocrystals and PANI operate synergistically on cell proliferation and osteogenesis through electrical stimulation. Alkaline phosphatase activity and extracellular calcium contents of cells on PANI-HAP display 3-fold and 2.6-fold increases, compared with bare Ti sheets, respectively. The valid integration of mineralization and electrical stimulation in this work renders an efficient strategy for implant coating, which might have potential applications in bone-related defects.

Hydroxyapatite-decorated ZrO2 for α-amylase immobilization: Toward the enhancement of enzyme stability and reusability

Herein, the immobilization of α-amylase onto hydroxyapatite (HA) and hydroxyapatite-decorated ZrO₂ (10%wt) (HA-ZrO₂) nanocomposite were investigated. The immobilization yield was 69.7% and 84% respectively. The structural differences were characterized using X-Ray diffraction, attenuated total reflectance-Fourier transform infrared spectra, Raman, and scanning electron microscope. After 10 repeated cycles, the residual activity of immobilized α-amylase onto HA and HA-ZrO₂ nanocomposite was 46% and 70%, respectively. The storage stability was recorded to be 27%, 50% and 69% from its initial activity in the case of free and immobilized enzyme onto HA and HA-ZrO₂ nanocomposite, respectively after 8 weeks. The pH-activity profile and temperature revealed pH 6.0 and temperature 50 °C as the optimal values of free α-amylase, while the optimum values for α-amylase on HA and HA-ZrO₂ was shifted to pH 6.5 and 60 °C after immobilization. The immobilized α-amylase onto HA-ZrO₂ showed comparatively higher catalytic activity than the free α-amylase. The Km value after the immobilization process onto HA was 2.1 folds highly than that of the free enzyme. In conclusion, it can be inferred that HA-ZrO₂ is more sustainable and beneficial support for enzyme immobilization and it represents promising supports for different uses of α-amylase in the biomedical applications.

Nano-hydroxyapatite/polyaniline composite as an efficient sorbent for sensitive determination of the polycyclic aromatic hydrocarbons in air by a needle trap device

Hydroxyapatite is a readily available, inexpensive, environmentally friendly adsorbent with high adsorption capacity. In this study, a polyaniline-doped nano-hydroxyapatite (PANI@HA) adsorbent was synthesized and employed in a needle trap device for the extraction of polycyclic aromatic hydrocarbons such as naphthalene, fluoranthene, benzo[a]anthracene, phenanthrene, and benzo[a]pyrene for the first time. The synthesized adsorbent was characterized by X-ray diffraction, field emission scanning electron microscopy, and Fourier-transform infrared spectroscopy analysis. Initially, effective variables such as the carryover effect, storage time, accuracy, and precision of the method were examined in the laboratory. The desorption conditions were optimized using the response surface methodology and central composite design methods. From the standpoint of quantitative parameters, the limit of detection and limit of quantitation were determined to be between 0.001 and 0.003 and 0.021 and 0.051 ng mL-1, respectively, which indicates the high sensitivity of the proposed method. Additionally, no significant changes were detected after storage of analytes inside the needle at 4 °C after 60 days. The results of this study also provide a high correlation between the results of sampling with needles containing PANI@HA and with XAD-2 adsorbent tubes (standard NIOSH 5115 method) (R 2 = 0.98). Finally, the proposed method was successfully employed in the extraction and determination of polycyclic aromatic hydrocarbons in field (real) samples. In general, it can be concluded that a needle packed with PANI@HA is a reliable and high-performance method for sampling polycyclic aromatic hydrocarbons compared to the NIOSH method.

Monitoring of Chemical Risk Factors for Sudden Infant Death Syndrome (SIDS) by Hydroxyapatite-Graphene-MWCNT Composite-Based Sensors

Sensing properties of chemical sensors based on ternary hydroxyapatite-graphene-multiwalled carbon nanotube (HA-GN-MWCNT) nanocomposite in the detection of chemical substances representing risk factors for sudden infant death syndrome (SIDS), have been evaluated. Characterization data of the synthesized composite have shown that the graphene-MWCNT network serves as a matrix to uniformly disperse the hydroxyapatite nanoparticles and provide suitable electrical properties required for developing novel electrochemical and conductometric sensors. A HA-GN-MWCNT composite-modified glassy carbon electrode (HA-GN-MWCNT/GCE) has been fabricated and tested for the simultaneous monitoring of nicotine and caffeine by cyclic voltammetry (CV) and square wave voltammetry (SWV), whereas a HA-GN-MWCNT conductive gas sensor has been tested for the detection of CO2 in ambient air. Reported results suggest that the synergic combination of the chemical properties of HA and electrical/electrochemical characteristics of the mixed graphene-MWCNT network play a prominent role in enhancing the electrochemical and gas sensing behavior of the ternary HA-GN-MWCNT hybrid nanostructure. The high performances of the developed sensors make them suitable for monitoring unhealthy actions (e. g. smoking, drinking coffee) in breastfeeding women and environmental factors (bad air quality), which are associated with an enhanced risk for SIDS.

A Mussel-Inspired Persistent ROS-Scavenging, Electroactive, and Osteoinductive Scaffold Based on Electrochemical-Driven In Situ Nanoassembly

Conductive polymers are promising for bone regeneration because they can regulate cell behavior through electrical stimulation; moreover, they are antioxidative agents that can be used to protect cells and tissues from damage originating from reactive oxygen species (ROS). However, conductive polymers lack affinity to cells and osteoinductivity, which limits their application in tissue engineering. Herein, an electroactive, cell affinitive, persistent ROS-scavenging, and osteoinductive porous Ti scaffold is prepared by the on-surface in situ assembly of a polypyrrole-polydopamine-hydroxyapatite (PPy-PDA-HA) film through a layer-by-layer pulse electrodeposition (LBL-PED) method. During LBL-PED, the PPy-PDA nanoparticles (NPs) and HA NPs are in situ synthesized and uniformly coated on a porous scaffold from inside to outside. PDA is entangled with and doped into PPy to enhance the ROS scavenging rate of the scaffold and realize repeatable, efficient ROS scavenging over a long period of time. HA and electrical stimulation synergistically promote osteogenic cell differentiation on PPy-PDA-HA films. Ultimately, the PPy-PDA-HA porous scaffold provides excellent bone regeneration through the synergistic effects of electroactivity, cell affinity, and antioxidative activity of the PPy-PDA NPs and the osteoinductivity of HA NPs. This study provides a new strategy for functionalizing porous scaffolds that show great promise as implants for tissue regeneration.

Sol gel synthesis of hybrid chitosan/calcium aluminosilicate nanocomposite membranes and its application as support for CO2 sensor

Modification of chitosan with cross-linkers, blends with various kinds of polymers, nanoparticles and new organic-inorganic hybrid composites in order to obtain some improved properties attached more attention nowadays due to their good sensitivity in changing electrical and optical properties. In the current work modified hybrid chitosan/calcium aluminosilicate (CH/CAS) nanocomposite membranes and doped with (3, 5 & 7 mol%) Al₂O₃ nanoparticles were synthesized via sol-gel process in acidic conditions, which can be efficiently employed to capture CO₂ gas at lower and moderate temperatures. Furthermore, the fabricated CH/CAS nanocomposite membrane loading with (3, 5 & 7 mol%) Al₂O₃ were investigated using XRD, SEM, FTIR and dielectric measurements. The results indicated that the incorporation of Al₂O₃ in CH/CAS matrix significantly affected on the structural, dielectric and appeared good reliability for sensing CO₂ at atmospheric pressure. The dielectric behaviour for the prepared CH/CAS indicates that the dielectric constant (ε') decreases. According to XRD the introducing of Al₂O₃ leads to increase the crystallinity of the system and thus the dipoles of the system orient hardly with the applied field and results in lesser dielectric constant (ε'). Correspondingly, the CH/CAS nanocomposite membranes were characterized and its performance as CO₂ gas sensor was evaluated.

Ammonia gas sensors based on In2O3/PANI hetero-nanofibers operating at room temperature

Indium nitrate/polyvinyl pyrrolidone (In(NO3)3/PVP) composite nanofibers were synthesized via electrospinning, and then hollow structure indium oxide (In2O3) nanofibers were obtained through calcination with PVP as template material. In situ polymerization was used to prepare indium oxide/polyaniline (In2O3/PANI) composite nanofibers with different mass ratios of In2O3 to aniline. The structure and morphology of In(NO3)3/PVP, In2O3/PANI composite nanofibers and pure PANI were investigated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and current-voltage (I-V) measurements. The gas sensing properties of these materials towards NH3 vapor (100 to 1000 ppm) were measured at room temperature. The results revealed that the gas sensing abilities of In2O3/PANI composite nanofibers were better than pure PANI. In addition, the mass ratio of In2O3 to aniline and the p-n heterostructure between In2O3 and PANI influences the sensing performance of the In2O3/PANI composite nanofibers. In this paper, In2O3/PANI composite nanofibers with a mass ratio of 1:2 exhibited the highest response values, excellent selectivity, good repeatability and reversibility.