One pot synthesis and characterization of Fe3O4 Nanorod-PNIPA Nanogel Composite for protein adsorption

Fabrication of Yolk-Shell Fe3O4@NiSiO3/Ni Microspheres for Efficient Purification of Histidine-Rich Proteins

Magnetic materials perform well in the purification of histidine-rich proteins (His-proteins). In this work, a facile fabrication of yolk-shell magnetic Fe₃O₄@NiSiO₃/Ni microspheres for the efficient purification of His-proteins has been reported. Yolk-shell Fe₃O₄@NiSiO₃ microspheres were prepared via hydrothermal reaction. Then Ni nanoparticles (NPs) were loaded on Fe₃O₄@NiSiO₃ microspheres after the adsorption and in situ reduction of nickel acetylacetonate. The yolk-shell Fe₃O₄@NiSiO₃/Ni microspheres had a hierarchical flower-like structure and large cavities. The size of the cavity depended on the reaction time. This indicated that the microspheres had a large specific surface area for loading of more Ni NPs, which was crucial to the high His-protein adsorption capacity of Fe₃O₄@NiSiO₃/Ni microspheres. Fe₃O₄@NiSiO₃/Ni microspheres had a high adsorption capacity for bovine hemoglobin (BHb, 2822 mg/g), which was better than the values of other His-protein adsorbents. Fe₃O₄@NiSiO₃/Ni microspheres still had a high BHb separation efficiency after seven separation cycles, indicating its good reusability and stability. Therefore, the as-prepared bifunctional yolk-shell Fe₃O₄@NiSiO₃/Ni microspheres exhibited great practical application value for His-protein purification.

Magnetic detection of albuminuria using hematite nanorods synthesized via chemical hydrothermal method

Objectives

Albuminuria is a biomarker in the diagnosis of kidney disease which is due to the presence of high albumin in the urine and is one of the complications of diabetes. In recent years, the methods used to identify albuminuria have been expensive and time-consuming. Furthermore, another problem is the lack of accurate measurement of albuminuria. This problem leads to kidney isolation as well as a decrease in erythropoietin levels. Therefore, the main aim of our work is to design a magnetic nanobiosensor with better sensitivity to detect minimal levels of albuminuria.

Materials and Methods

In the present work, we synthesized Hematite Nano Rods (HNRs) using FeCl₃, NaOH and Cetyltrimethylammonium bromide (CTAB) precursors via the hydrothermal method. Then, HNRs were characterized using UV-vis spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and Vibrating Sample Magnetometer (VSM) techniques.

Results

The obtained results from clinical performance of the HNR nanobiosensor show that the magnetization changes of HNR in interaction with the albumin biomarker can determine the presence or absence of protein in biological samples. The accuracy and repeatability of the HNR nanobiosensor from the value of the R2 coefficient in the standard equation is 0.9743.

Conclusion

We obtained the standard curve through interaction of the HNRs with albumin protein. The standard equation is obtained by plotting the magnetization curve of a non-interacting sample to interacting samples in terms of protein concentration. The Bland-Altman statistical graph prove that the HNR nanobiosensor is as reliable as experimental methods.

Magnetic Porous Controlled Fe3O4-Chitosan Nanostructure: An Ecofriendly Adsorbent for Efficient Removal of Azo Dyes

In this work, chitosan/magnetite nanoparticles (ChM) were quickly synthesized according to our previous report based on co-precipitation reaction under ultrasound (US) irradiation. Besides ChM was in-depth structurally characterized, showing a crystalline phase corresponding to magnetite and presenting a spheric morphology, a "nanorod"-type morphology was also obtained after increasing reaction time for eight minutes. Successfully, both morphologies presented a nanoscale range with an average particle size of approximately 5-30 nm, providing a superparamagnetic behavior with saturation magnetization ranging from 44 to 57 emu·g^-1. As ChM nanocomposites have shown great versatility considering their properties, we proposed a comparative study using three different amine-based nanoparticles, non-surface-modified and surface-modified, for removal of azo dyes from aqueous solutions. From nitrogen adsorption-desorption isotherm results, the surface-modified ChMs increased the specific surface area and pore size. Additionally, the adsorption of anionic azo dyes (reactive black 5 (RB5) and methyl orange (MO)) on nanocomposites surface was pH-dependent, where surface-modified samples presented a better response under pH 4 and non-modified one under pH 8. Indeed, adsorption capacity results also showed different adsorption mechanisms, molecular size effect and electrostatic attraction, for unmodified and modified ChMs, respectively. Herein, considering all results and nanocomposite-type structure, ChM nanoparticles seem to be a suitable potential alternative for conventional anionic dyes adsorbents, as well as both primary materials source, chitosan and magnetite, are costless and easily supplied.

Incorporation of quantum carbon dots into a PVP/ZnO hydrogel for use as an effective hexavalent chromium sensing platform

Hydrogels offer a unique medium for sensing applications as they can draw upon the benefits of both solid and liquid sensing platforms. Incorporation of functionalised fluorescent nanoparticles within the hydrogel matrix results in a three-dimensional nanocomposite capable of interacting with water-soluble analytes, facilitating quantitative sensing applications. Here, we report the solvothermal synthesis of a novel Polyvinylpyrrolidone assembled hydrogel stabilised with zinc oxide quantum dots which does not require additional organic crosslinkers. Functionalization of these hydrogel with novel, brightly photoluminescent 2-amino-2-methyl-1-propanol quantum carbon dots (quantum yield of 62.5%) results in a composite capable of specific interaction with hexavalent chromium. Quantitative fluorescence quenching measurements of the hydrogel composite in the presence of hexavalent chromium shows a limit of detection of 1.2 μM Cr⁶⁺ which is below maximum allowable concentrations for drinking water. The hydrogel composite is cheap to manufacture and can be injected into 96 well plates for high throughput analysis of environmental water samples. These results are encouraging for the development of hydrogels and polymetric films to be used as novel fluorescent sensing platforms for environmental diagnostic applications.

Stimulus-responsive polymeric nanogels as smart drug delivery systems

Nanogels are three-dimensional nanoscale networks formed by physically or chemically cross-linking polymers. Nanogels have been explored as drug delivery systems due to their advantageous properties, such as biocompatibility, high stability, tunable particle size, drug loading capacity, and possible modification of the surface for active targeting by attaching ligands that recognize cognate receptors on the target cells or tissues. Nanogels can be designed to be stimulus responsive, and react to internal or external stimuli such as pH, temperature, light and redox, thus resulting in the controlled release of loaded drugs. This "smart" targeting ability prevents drug accumulation in non-target tissues and minimizes the side effects of the drug. This review aims to provide an introduction to nanogels, their preparation methods, and to discuss the design of various stimulus-responsive nanogels that are able to provide controlled drug release in response to particular stimuli. STATEMENT OF SIGNIFICANCE: Smart and stimulus-responsive drug delivery is a rapidly growing area of biomaterial research. The explosive rise in nanotechnology and nanomedicine, has provided a host of nanoparticles and nanovehicles which may bewilder the uninitiated reader. This review will lay out the evidence that polymeric nanogels have an important role to play in the design of innovative drug delivery vehicles that respond to internal and external stimuli such as temperature, pH, redox, and light.

Efficient targeted cancer cell detection, isolation and enumeration using immuno-nano/hybrid magnetic microgels

Magnetic nano/hybrid structures have drawn ample attention in the field of biotechnology due to their excellent magnetic properties and biocompatibility.

Design, Synthesis and Architectures of Hybrid Nanomaterials for Therapy and Diagnosis Applications

Hybrid nanomaterials based on inorganic nanoparticles and polymers are highly interesting structures since they combine synergistically the advantageous physical-chemical properties of both inorganic and polymeric components, providing superior functionality to the final material. These unique properties motivate the intensive study of these materials from a multidisciplinary view with the aim of finding novel applications in technological and biomedical fields. Choosing a specific synthetic methodology that allows for control over the surface composition and its architecture, enables not only the examination of the structure/property relationships, but, more importantly, the design of more efficient nanodevices for therapy and diagnosis in nanomedicine. The current review categorizes hybrid nanomaterials into three types of architectures: core-brush, hybrid nanogels, and core-shell. We focus on the analysis of the synthetic approaches that lead to the formation of each type of architecture. Furthermore, most recent advances in therapy and diagnosis applications and some inherent challenges of these materials are herein reviewed.

Synthesis and characterization of magnetite nanoparticles having different cover layer and investigation of cover layer effect on the adsorption of lysozyme and bovine serum albumin

In this study, differently coated superparamagnetic Fe₃O₄ (magnetite) nanoparticles were synthesized, characterized and used for lysozyme (Ly) and bovine serum albumin (BSA) adsorption. SiO₂, carbon nanotubes (CNTs) and graphene were used for covering the readily synthesized magnetite nanoparticles to elucidate the effect of cover layer on the protein adsorption kinetics and capacities of nanostructure. XRD, FTIR, AFM, SEM, VSM and fluorescence measurements were used for the characterization of the samples and investigating the adsorption kinetics of Ly and BSA by these nanoparticles. The average particle size of the Fe₃O₄ nanoparticles are approximately found as 10nm and VSM measurement shows that the Fe₃O₄ particles have superparamagnetic behavior with no hysteresis and remnant. The adsorption kinetic of proteins on nanosized material is followed via fluorescence method. All the nanostructures with different cover layers obey pseudo first order kinetics and SiO₂ coated nanoparticles show the fastest kinetics and capabilities for Ly and BSA adsorption.

Antibacterial SnO2 nanorods as efficient fillers of poly(propylene fumarate-co-ethylene glycol) biomaterials

Antibacterial and biocompatible SnO₂ nanorods have been easily synthesized through a hydrothermal process with the aid of a cationic surfactant, and incorporated as nanoreinforcements in poly(propylene fumarate-co-ethylene glycol) (P(PF-co-EG)) copolymer crosslinked with N-vinyl-pyrrolidone (NVP) by sonication and thermal curing. The nanorods were randomly and individually dispersed inside the P(PF-co-EG) network, and noticeably increased the thermal stability, hydrophilicity, degree of crystallinity, protein absorption capability as well as stiffness and strength of the matrix, whilst decreased its level of porosity and biodegradation rate. More importantly, the resulting nanocomposites retained adequate rigidity and strength after immersion in a simulated body fluid (SBF) at 37°C. They also exhibited biocide action against Gram-positive and Gram-negative bacteria; their antibacterial effect was strong under UV-light illumination whilst in dark conditions was only moderate. Further, they did not cause toxicity on human dermal fibroblasts. The friction coefficient and wear rate strongly decreased with increasing nanorod loading under both dry and SBF conditions; the greatest drops in SBF were about 18-fold and 13-fold, respectively, compared to those of the copolymer network. These novel biomaterials are good candidates to be applied in the field of soft-tissue engineering.