MgAl- Layered Double Hydroxide Nanoparticles for controlled release of Salicylate

Improvement of solubility, dissolution, and bioavailability of phenytoin intercalated in Mg-Al layered double hydroxide

Layered double hydroxides (LDHs) are highly effective drug delivery systems, owing to their capacity to intercalate or adsorb biomaterials, flexible structure, swelling property, high stability, good biocompatibility, and ease of synthesis. Phenytoin (PHT) is an antiseizure BCS (Biopharmaceutics Classification System) class II drug, presenting low aqueous solubility. Therefore, the current study aimed at increasing its solubility, dissolution, and bioavailability. PHT was intercalated to the MgAl-LDH formed in situ and successful intercalation to form MgAl-PHT-LDH was confirmed by FTIR, PXRD, DSC, and TGA. Examination of particle size and morphology (by photon correlation spectroscopy and electron microscopy, respectively) confirmed the formation and intercalation of nanostructured LDH. Intercalation enhanced the saturation solubility of PHT at 25°C in 0.1N HCl and phosphate buffer (pH 6.8) by 6.57 and 10.5 times respectively. The selected drug excipient powder blend for the formulation of MgAl-PHT-LDH tablets exhibited satisfactory properties in both pre-compression parameters (angle of repose, bulk density, tapped density, Carr's index, and Hausner ratio) and tablet characteristics (weight variation, thickness, hardness, friability, content uniformity, and disintegration time). MgAl-PHT-LDH tablets showed better dissolution of PHT compared to unprocessed PHT tablets at all time points. Oral bioavailability of MgAl-PHT-LDH tablets and unprocessed PHT tablets was tested in two groups of Sprague Dawley rats based on analysis of serum levels of both forms of PHT by UPLC-ESI-MS/MS serum. MgAl-PHT-LDH tablets demonstrated a relative bioavailability of 130.15% compared to unprocessed PHT tablets, confirming a significantly higher oral bioavailability of MgAl-PHT-LDH. In conclusion, MgAl-PHT-LDH could provide a strategy for enhancing solubility, dissolution, and thereby bioavailability of PHT, enabling the evaluation of theclinical efficacy of MgAl-PHT-LDH tablets for the treatment of seizures at lower PHT doses.

A facile one-pot synthesis of tetrahydrobenzo[b]pyrans and 2-amino-4H-chromenes under green conditions

This research developed a new nanocatalyst by incorporating nanocopper iodide onto the surface of a layered double hydroxides modified. This new nanocatalyst enables the green synthesis of tetrahydrobenzo[b]pyrans and 2-amino-4H-chromene derivatives through a one-pot, three-component reaction, demonstrating remarkable activity and selectivity. Key advantages of this method include increased products yield (86-96%), rapid reaction kinetics (5-23 minutes), low reaction temperature (40 °C), synthesis of new products, straightforward purification methods, catalyst recyclability (up to 4 cycles), and solvent-free conditions.

Synthesis and characterization of mupirocin-LDH/PVA nanofibrous composite as a dual-carrier drug release system

Nowadays, nanofibrous structures based on organic and inorganic materials are considered a drug delivery system for the controlled release of antibiotics and other antibacterial agents. The main goal of this research is a combination of the special properties of nanofibrous structure and Mupirocin-loaded Layered double hydroxide (LDH) to obtain a dual-carrier drug release system to provide long term antibacterial properties in wound healing process. Regards, unloaded layered double hydroxide (LDH) and Mupirocin-loaded LDH, which were synthesized by co-precipitation method, were added to Polyvinyl alcohol (PVA) solution in different mass ratio and electrospun using different processing conditions. The physico-chemical characterizations were performed using SEM, FTIR and tensile strength tests. The biological properties of the fabricated nanocomposites were evaluated using antibacterial test and in vitro cell culturing followed by MTT assay. The SEM results showed a bead-less and uniform morphology of nanofibrous composite containing Mupirocin(2.3 wt%)-LDH(15 wt%)/PVA with an average fiber diameter of about 270 ± 58 nm. According to the release study, the maximum release of the mupirocin drug was about 54 % in the first 6 h. The antibiogram analysis exhibited good antibacterial activity of mupirocin-loaded nanocomposite against both bacteria, especially gram-positive one. Finally, MTT assay approved the biocompatibility of the mupirocin-loaded nanocomposite. Overall, the produced nanofibrous composites would be a promising dual-carrier system for controlled release of antibiotic.

A new method for the preparation of MgAl layered double hydroxide-copper metal-organic frameworks structures: application to electrocatalytic oxidation of formaldehyde

In this research, we present a novel design protocol for the in-situ synthesis of MgAl layered double hydroxide-copper metal-organic frameworks (LDH-MOFs) nanocomposite based on the electrocoagulation process and chemical method. The overall goal in this project is the primary synthesis of para-phthalic acid (PTA) intercalated MgAl-LDH with Cu (II) ions to produce the paddle-wheel like Cu-(PTA) MOFs nanocrystals on/in the MgAl-LDH structure. The physicochemical properties of final product; Cu-(PTA) MOFs/MgAl-LDH, were characterized by the surface analysis and chemical identification methods (SEM, EDX, TEM, XRD, BET, FTIR, CHN, DLS, etc.). The Cu-(PTA) MOFs/MgAl-LDH nanocomposite was used to modification of the carbon paste electrode (CPE); Cu-(PTA) MOFs/MgAl-LDH/CPE. The electrochemical performance of Cu-(PTA) MOFs/MgAl-LDH/CPE was demonstrated through the utilization of electrochemical methods. The results show a stable redox behavior of the Cu (III)/Cu (II) at the surface of Cu-(PTA) MOFs/MgAl-LDH/CPE in alkaline medium (aqueous 0.1 M NaOH electrolyte). Then, the Cu-(PTA) MOFs/MgAl-LDH/CPE was used as a new electrocatalyst toward the oxidation of formaldehyde (FA). Electrochemical data show that the Cu-(PTA) MOFs/MgAl-LDH/CPE exhibits superior electrocatalytic performance on the oxidation of FA. Also the diffusion coefficient, exchange current density (J°) and mean value of catalytic rate constant (Kcat) were found to be 1.18 × 10-6 cm2 s-1, 23 mA cm-2 and 0.4537 × 104 cm3 mol-1 s-1, respectively. In general, it can be said the Cu-(PTA) MOFs/MgAl-LDHs is promising candidate for applications in direct formaldehyde fuel cells.

Construction of High Energy Nanoscale Lead Azide Composite with Improved Flame Sensibility from Intercalated Hydroxide

It is of great significance to develop efficient methods for preparing high-content modified nanoscale lead azide (LA) composites used in microinitiating devices. In this work, a structurally controllable salicylate-intercalated lead hydroxide with a nanoscale mesoporous structure is designed. Using it as a precursor, carbon-based lead azide (LA/C) and salicylate-based lead azide (LA/SA) are fabricated by the gas-solid azidation of the framework (GAF) method within 3 h, greatly reducing the preparation time of nano-LA composites. The characterizations of the composites demonstrate that the Pb in the precursors is transformed into nanoscale LA attached to the salicylate radical or its carbonized skeleton. Due to the unique embedded nanostructures and excellent electrical and thermal conductivity of salicylate-derived carbon materials, LA/C exhibits excellent electrostatic safety (E50 = 0.25 J) and flame sensitivity (H50 = 28 cm). The adjustable organic-inorganic ratio of intercalated hydroxides allows the LA content in LA/C to reach as high as 92.5%, enabling 6.50 mg of LA/C to successfully detonate secondary explosive CL-20 in a microinitiating device, demonstrating an amazing detonation ability superior to other reported LA complexes. The research provides a new perspective for the development of nanoscale LA composites with high LA content and appropriate sensitivity.

Basic Properties of MgAl-Mixed Oxides in CO2 Adsorption at High Temperature

The increase of consciousness towards global warming and the need to reduce greenhouse gas emissions lead to the necessity of finding alternative applications based on easy-to-use materials in order to control and reduce global CO2 emissions. Layered Double Hydroxides (LDHs) and LDH-derived materials are potentially good adsorbents for CO2, thanks to their low cost, easy synthesis, high sorption capacity, and surface basicity. They have been intensively studied in CO2 capture at high temperature, presenting variable sorption capacities for MgAl LDHs with the same composition, but prepared under different synthesis conditions. The ambient temperature coprecipitation synthesis method is an attractive one-step procedure to synthesize LDHs under mild conditions, with low energy consumption and short synthesis time. The present study is based on the synthesis and characterization of hydrotalcites by a mild-conditions coprecipitation process and the production of derived mixed oxides to be used as CO2 adsorbents. A critical comparison to similar materials is reported. Moreover, the effect of the surface basicity of the derived mixed oxides (measured by adsorption calorimetry) and the CO2 sorption capacity are discussed, showing a linear correlation between the amount of weak and very strong basic sites and the CO2 adsorption behavior.

Engineered Sericin-Tagged Layered Double Hydroxides for Combined Delivery of Pemetrexed and ZnO Quantum Dots as Biocompatible Cancer Nanotheranostics

Despite extensive progress in the field of cancer nanotheranostics, clinical development of biocompatible theranostic nanomedicine remains a formidable challenge. Herein, we engineered biocompatible silk-sericin-tagged inorganic nanohybrids for efficient treatment and imaging of cancer cells. The developed nanocarriers are anticipated to overcome the premature release of the chemotherapeutic drug pemetrexed (PMX), enhance the colloidal stability of layered double hydroxides (LDHs), and maintain the luminescence properties of ZnO quantum dots (QDs). Materials and Methods: PMX-intercalated LDHs were modified with sericin and coupled to ZnO QDs for therapy and imaging of breast cancer cells. Results: The optimized nanomedicine demonstrated a sustained release profile of PMX, and high cytotoxicity against MDA-MB-231 cells compared to free PMX. In addition, high cellular uptake of the engineered nanocarriers into MDA-MB-231 breast cancer cells was accomplished. Conclusions: Conclusively, the LDH-sericin nanohybrids loaded with PMX and conjugated to ZnO QDs offered a promising cancer theranostic nanomedicine.

Journey to the Market: The Evolution of Biodegradable Drug Delivery Systems

Biodegradable polymers have been used as carriers in drug delivery systems for more than four decades. Early work used crude natural materials for particle fabrication, whereas more recent work has utilized synthetic polymers. Applications include the macroscale, the microscale, and the nanoscale. Since pioneering work in the 1960’s, an array of products that use biodegradable polymers to encapsulate the desired drug payload have been approved for human use by international regulatory agencies. The commercial success of these products has led to further research in the field aimed at bringing forward new formulation types for improved delivery of various small molecule and biologic drugs. Here, we review recent advances in the development of these materials and we provide insight on their drug delivery application. We also address payload encapsulation and drug release mechanisms from biodegradable formulations and their application in approved therapeutic products.

Layered Double Hydroxides as Promising Excipients for Drug Delivery Purposes

Layered Double Hydroxides (LDH) have received great attention in the development of drug carrier systems. LDHs have become intelligent excipients of high technological potential for the pharmaceutical industry due to their ability to intercalate biomaterials in the interlayer region, adsorb substances on its vast surface area, have flexible structure, swelling properties, high chemical and thermal stability, modulate drug release, have high biocompatibility and be easily synthesized. This article, using typical examples, mainly addresses the systems formed between LDHs and antimicrobial, antineoplastic and anti-inflammatory agents, which constitute the main pharmacological classes of wide interest due to the problems encountered with low solubility, control in administration, stability in body fluids and toxicity, among others. Additionally, the article also reports on the recent development of ternary or quaternary (multicomponent systems) compounds based on LDH, bringing the advantages of targeted therapy, improving the aqueous stability of nanohybrids and the performance of these inorganic carriers.

Structure-modulated CaFe-LDHs with superior simultaneous removal of deleterious anions and corrosion protection of steel rebar

The three anionic species; chloride (Cl⁻), sulfate (SO₄²⁻), and carbonate (CO₃²⁻), are typical chemical factors that environmentally accelerate failure of concrete structures with steel rebar through long-term exposure. Efficient removal of these deleterious anions at the early stage of penetration is crucial to enhance the lifespan and durability of concrete structures. Here, we synthesize CaFe-layered double hydroxide (CaFe-LDHs) by a simple one-step co-precipitation technique and structural modulation by calcination process. It is applied for the removal of Cl⁻, SO₄²⁻, and CO₃²⁻ anions as well as corrosion inhibition on steel rebar in aqueous solutions. The synthesized CaFe-LDHs with phase transfer show notable improvement of removal capacity (Q_max) toward Cl⁻ and SO₄²⁻ over 3.4 times and over 5.69 times, respectably, then those of previous literatures. Furthermore, the steel rebar exposed to an aqueous solution containing the three anionic sources shows a fast corrosion rate (1876.56 × 10⁻³ mm per year), which can be remarkably inhibited showing 98.83% of corrosion inhibition efficiency when it is surrounded by those CaFe-LDHs. The novel adsorption mechanisms of these CaFe-LDHs-induced crystals and corresponding corrosion protection properties are elucidated drawing on synergy of memory effects and chemical reactions.

The three anionic species; chloride (Cl⁻), sulfate (SO₄²⁻), and carbonate (CO₃²⁻), are typical chemical factors that environmentally accelerate failure of concrete structures with steel rebar through long-term exposure.

Surface modification of fluorescent Tb3+-doped layered double hydroxides with hyperbranched polymers through host-guest interaction

The preparation of fluorescent inorganic-organic polymer composites for biomedical applications has become one of the most interest research focuses recently. In this work, we reported a novel method for the preparation of Tb³⁺-doped luminescent layered double hydroxides (LDHs) based composites by taken advantage of a one-pot supramolecular chemistry. The adamantane can be immobilized on the surface of Tb³⁺-doped LDHs to obtain LDH-Ad, which could be further utilized for modified by the β-cyclodextrin (β-CD) containing hyperbranched polyglycerols (β-CD-HPG) through the host-guest interaction. Based on the characterization results, we demonstrated that the hyperbranched polyglycerol could be facilely introduced on these fluorescent Tb³⁺-doped LDHs through the method described in this work. The obtained Tb³⁺-doped LDHs based polymer composites (LDHs-β-CD-HPG) display improved water dispersibility and still maintain their fluorescence. The results based on various biological assays suggest that LDHs-β-CD-HPG polymer composites are of low cytotoxicity and their cell uptake behavior can be effectively traced using confocal laser imaging. All of the above results demonstrated that the fluorescent Tb³⁺-doped LDHs based polymer composites could be effectively surface modified with hydrophilic hyperbranched polymers through a one-pot facile host-guest interaction and the resultant fluorescent composites are of excellent physicochemical properties and display great potential for biomedical applications. This novel surface modification method should also be important for fabrication of other multifunctional composites and therefore great advanced the development of biomedical applications of fluorescent LDHs based polymer composites and related materials.

The Impact of Magnesium-Aluminum-Layered Double Hydroxide-Based Polyvinyl Alcohol Coated on Magnetite on the Preparation of Core-Shell Nanoparticles as a Drug Delivery Agent

One of the current developments in drug research is the controlled release formulation of drugs, which can be released in a controlled manner at a specific target in the body. Due to the diverse physical and chemical properties of various drugs, a smart drug delivery system is highly sought after. The present study aimed to develop a novel drug delivery system using magnetite nanoparticles as the core and coated with polyvinyl alcohol (PVA), a drug 5-fluorouracil (5FU) and Mg–Al-layered double hydroxide (MLDH) for the formation of FPVA-FU-MLDH nanoparticles. The existence of the coated nanoparticles was supported by various physico-chemical analyses. In addition, the drug content, kinetics, and mechanism of drug release also were studied. 5-fluorouracil (5FU) was found to be released in a controlled manner from the nanoparticles at pH = 4.8 (representing the cancerous cellular environment) and pH = 7.4 (representing the blood environment), governed by pseudo-second-order kinetics. The cytotoxicity study revealed that the anticancer delivery system of FPVA-FU-MLDH nanoparticles showed much better anticancer activity than the free drug, 5FU, against liver cancer and HepG2 cells, and at the same time, it was found to be less toxic to the normal fibroblast 3T3 cells.

A novel antimicrobial composite: ZnAl-hydrotalcite with p-hydroxybenzoic acid intercalation and its possible application as a food packaging material

p-Hydroxybenzoic acid was intercalated into LDHs (Zn/Al ratio = 4 : 1). The former possesses anti-fungal activity and the latter shows the best antibacterial effect.

Functional intercalated nanocomposites with chitosan-glutathione-glycylsarcosine and layered double hydroxides for topical ocular drug delivery

Background

To enhance ocular bioavailability, the traditional strategies have focused on prolonging precorneal retention and improving corneal permeability by nano-carriers with positive charge, thiolated polymer, absorption enhancer and so on. Glycylsarcosine (GS) as an active target ligand of the peptide tranpsporter-1 (PepT-1), could specific interact with the PepT-1 on the cornea and guide the nanoparticles to the treating site.

Purpose

The objective of the study was to explore the active targeting intercalated nanocomposites based on chitosan-glutathione-glycylsarcosine (CG-GS) and layered double hydroxides (LDH) as novel carriers for the treatment of mid-posterior diseases.

Materials and methods

CG-GS-LDH intercalated nanocomposites were prepared by the coprecipitation hydrothermal method. In vivo precorneal retention study, ex vivo fluorescence images, in vivo experiment for distribution and irritation were studied in rabbits. The cytotoxicity and cellular uptake were studied in human corneal epithelial primary cells (HCEpiC).

Results

CG-GS-LDH nanocomposites were prepared successfully and characterized by FTIR and XRD. Experiments with rabbits showed longer precorneal retention and higher distribution of fluorescence probe/model drug. In vitro cytological study, CG-GS-LDH nanocomposites exhibited enhanced cellular uptake compared to pure drug solution. Furthermore, the investigation of cellular uptake mechanisms demonstrated that both the active transport by PepT-1 and clathrin-mediated endocytosis were involved in the internalization of CG-GS-LDH intercalated nanocomposites. An ocular irritation study and a cytotoxicity test indicated that these nanocomposites produced no significant irritant effects.

Conclusions

The active targeting intercalated nanocomposites could have great potential for topical ocular drug delivery due to the capacity for prolonging the retention on the ocular surface, enhancing the drug permeability through the cornea, and efficiently delivering the drug to the targeted site.

A colorimetric-dispersive solid-phase extraction method for the sensitive and selective determination of iron using dissolvable bathocuproinedisulfonic acid-intercalated layered double hydroxide nanosheets

In this research, a novel, simple, sensitive and selective method has been presented for the determination of iron using dissolvable bathocuproine disulfonic acid (BCS)-layered double hydroxides (LDHs) for dispersive solid-phase extraction (DSPE).

Hierarchical self-supported ZnAlEu LDH nanotubes hosting luminescent CdTe quantum dots

Self-assembled, cylindrical LDH nanotubes (∅ 20nm) host large species such as nanodots or bulky substrates in their central cavity, leaving the interlayer space available for anionic sensitizer molecules.