Poly-dopamine-beta-cyclodextrin: A novel nanobiopolymer towards sensing of some amino acids at physiological pH

PLSR-colorimetric simultaneous determination of L-Tyrosine and L-Tryptophan in different pharmaceutical and biological samples using one-pot synthesized leaf shape Ag@Ag2O core-shell nanocomposites modified by β-CD

In the present study, a simple, innovative, and economically beneficial method has been proposed for the synthesis of Ag@Ag2O core-shell nanocomposites using Acanthophora muscoides algae extract. The host-guest recognition of targets was performed by modification of the Ag@Ag2O surface using β-CD. The Ag@Ag2O- β-CD NCs were used as a colorimetric sensor to determine L-Tryptophan and L-Tyrosine using a partial least square (PLS) approach. A crystalline hybrid structure of Ag core and an Ag2O shell was confirmed by XRD, FTIR, TEM and AFM research. Also, DLS analysis and surface zeta potential spectra illustrated the aggregated nature of nanocomposites in the presence of analytes. The literature review shows that the colorimetric simultaneous determination of L-Tryptophan (L-Try) and L-Tyrosine (L-Tyr) has not been reported. The Ag@Ag2O- β-CD sensor exhibited outstanding sensing capability in a broad linear range of 2.0 -200 μM for both amino acids and low detection limit of 0.32 and 0.51 μM, for L-Try and L-Tyr, respectively. The good sensitivity and excellent selectivity regarding possible interfering species, originated from the synergistic effect of host-guest recognition in combination with colorimetric sensing. Additionally, determination of analytes in various pharmaceutical, supplement and urine samples, approved the practical applicability of the constructed sensor. The computed results confirmed that colorimetric sensing in conjunction with a PLS technique was appropriate for the precise and accurate simultaneous determination of target amino acids in complex mixtures with RMSEP less than 2.5% and recovery in the range of 103-108% with R.S.D. values less than 3%.

In Vitro/In Vivo Preparation and Evaluation of cRGDyK Peptide-Modified Polydopamine-Bridged Paclitaxel-Loaded Nanoparticles

Cancer remains a disease with one of the highest mortality rates worldwide. The poor water solubility and tissue selectivity of commonly used chemotherapeutic agents contribute to their poor efficacy and serious adverse effects. This study proposes an alternative to the traditional physicochemically combined modifications used to develop targeted drug delivery systems, involving a simpler surface modification strategy. cRGDyK peptide (RGD)-modified PLGA nanoparticles (NPs) loaded with paclitaxel were constructed by coating the NP surfaces with polydopamine (PD). The average particle size of the produced NPs was 137.6 ± 2.9 nm, with an encapsulation rate of over 80%. In vitro release tests showed that the NPs had pH-responsive drug release properties. Cellular uptake experiments showed that the uptake of modified NPs by tumor cells was significantly better than that of unmodified NPs. A tumor cytotoxicity assay demonstrated that the modified NPs had a lower IC50 and greater cytotoxicity than those of unmodified NPs and commercially available paclitaxel formulations. An in vitro cytotoxicity study indicated good biosafety. A tumor model in female BALB/c rats was established using murine-derived breast cancer 4T1 cells. RGD-modified NPs had the highest tumor-weight suppression rate, which was higher than that of the commercially available formulation. PTX-PD-RGD-NPs can overcome the limitations of antitumor drugs, reduce drug toxicity, and increase efficacy, showing promising potential in cancer therapy.

Synthesis of poly (L-cysteine)/g-C3N4 modified glassy carbon electrodes for electrochemical detection of methotrexate as a medicine for treatment of breast cancer in pharmaceutical fluid samples

Analyzing the levels of anticancer medications in biological samples and body fluids reveals important details on the course and effects of chemotherapy. p (L-Cys)/graphitic-carbon nitride (g-C₃N₄)/GCE, a modified glassy carbon electrode, was created for the current study's electrochemical detection of methotrexate (MTX), a drug used to treat breast cancer, in pharmaceutical fluid samples. l-Cysteine was electro-polymerized on the surface of the g-C₃N₄/GCE after the g-C₃N₄ was first modified to prepare the p (L-Cys)/g-C₃N₄/GCE. Analyses of morphology and structure showed that well-crystalline p (L-Cys) on g-C₃N₄/GCE was successfully electropolymerized. Studying the electrochemical characteristics of p (L-Cys)/g-C₃N₄/GCE using CV and DPV techniques revealed a synergistic impact between g-C₃N₄ and l-cysteine that improved the stability and selectivity of the electrochemical oxidation of MTX while enhancing the electrochemical signal. Results showed that 7.5-780 μM was the linear range, and that 0.11841 μA/μM and 6 nM, respectively, were the sensitivity and limit of detection. The applicability of the suggested sensors was assessed using real pharmaceutical preparations, and the results showed that p (L-Cys)/g-C₃N₄/GCE had a high degree of precision. Five breast cancer patients who volunteered and provided prepared blood serum samples between the ages of 35 and 50 were used to examine the validity and accuracy of the proposed sensor in the current work for the determination of MTX. The results showed good recovery values (greater than 97.20%), appropriate accuracy (RSD less than 5.11%), and good agreement between the ELISA and DPV analysis results. These findings showed that p (L-Cys)/g-C₃N₄/GCE can be applied as a trustworthy MTX sensor for MTX level monitoring in blood samples and pharmaceutical samples.

Self-assembled monolayer-assisted label-free electrochemical genosensor for specific point-of-care determination of Haemophilus influenzae

For sensitive detection of the L-fuculokinase genome related to the Haemophilus influenzae (H. influenzae), this research work demonstrates the label-free electrochemical-based oligonucleotide genosensing assay relying on the performing hybridization process. To enhance the electrochemical responses, multiple electrochemical modifier-tagged agents were effectively utilized. For attaining this goal, NiCr-layered double hydroxide (NiCr LDH) has been synthesized and combined with biochar (BC) to create an efficient electrochemical signal amplifier that has been immobilized on the surface of the bare Au electrode. Low detection and quantification limits (LOD and LOQ) associated with the designed genosensing bio-platform to detect L-fuculokinase have been achieved to 6.14 fM and 11 fM, respectively. Moreover, the wide linear range of 0.1 to 1000 pM demonstrates the capability of the designed platform. Investigated were the 1-, 2-, and 3-base mismatched sequences, and the negative control samples clarified the high selectivity and better performance of the engineered assay. The values of 96.6-104% and 2.3-3.4% have been obtained for the recoveries and RSDs, respectively. Furthermore, the repeatability and reproducibility of the associated bio-assay have been studied. Consequently, the novel method is appropriate for rapidly and quantitatively detecting H. influenzae, and is considered a better candidate for advanced tests on biological samples such as urine samples.

Positional Isomeric Symmetric Dipodal Receptors Dangled with Rotatable Binding Scaffolds: Fluorescent Sensing of Silver Ions and Sequential Detection of l-Histidine and Their Multifarious Applications

Three simple dipodal artificial acyclic symmetric receptors, SDO, SDM, and SDP, driven by positional isomerism based on xylelene scaffolds were designed, synthesized, and characterized by ¹H NMR, ¹³C NMR, and mass spectroscopy techniques. Probes SDO, SDM, and SDP demonstrated selective detection of Ag⁺ metal ions and amino acid l-histidine in a DMSO-H₂O solution (1:1 v/v, HEPES 50 mM, pH = 7.4). The detection of Ag⁺ metal ions occurred in three ways: (i) inhibition of the photoinduced electron-transfer (PET) process, (ii) blueshifted fluorescence enhancement via the intramolecular charge-transfer (ICT) process, and (iii) restricted rotation of the dangling benzylic scaffold following coordination with a Ag⁺ metal ion. Job's plot analysis and quantum yields confirm the binding of probes to Ag⁺ in 1:1, 1:2, and 1:2 ratios with LODs and LOQs found to be 1.3 μM and 3.19 × 10^-7 M, 6.40 × 10^-7 and 2.44 × 10 ^-6 M, and 9.76 × 10^-7 and 21.01 × 10^-7 M, respectively. ¹H NMR titration, HRMS, ESI-TOF, IR analysis, and theoretical DFT investigations were also used to establish the binding stoichiometry. Furthermore, the probes were utilized for the detection of Ag⁺ ions in water samples, food samples, soil analysis, and bacterial imaging in Escherichia coli cells and a molecular logic gate was constructed.

Recent advances in nanoparticle-based photothermal therapy for breast cancer

Breast cancer is one of the most common cancers among women that is associated with high mortality. Conventional treatments including surgery, radiotherapy, and chemotherapy, which are not effective enough and have disadvantages such as toxicity and damage to healthy cells. Photothermal therapy (PTT) of cancer cells has been took great attention by researchers in recent years due to the use of light radiation and heat generation at the tumor site, which thermal ablation is considered a minimally invasive method for the treatment of breast cancer. Nanotechnology has opened up a new perspective in the treatment of breast cancer using PTT method. Through NIR light absorption, researchers applied various nanostructures because of their specific nature of penetrating and targeting tumor tissue, increasing the effectiveness of PTT, and combining it with other treatments. If PTT is used with common cancer treatments, it can dramatically increase the effectiveness of treatment and reduce the side effects of other methods. PTT performance can also be improved by hybridizing at least two different nanomaterials. Nanoparticles that intensely absorb light and increase the efficiency of converting light into heat can specifically kill tumors through hyperthermia of cancer cells. One of the main reasons that have increased the efficiency of nanoparticles in PTT is their permeability and durability effect and they can accumulate in tumor tissue. Targeted PTT can be provided by incorporating specific ligands to target receptors expressed on the surface of cancer cells on nanoparticles. These nanoparticles can specifically target cancer cells by maintaining the surface area and increasing penetration. In this study, we briefly introduce the performance of light therapy, application of metal nanoparticles, polymer nanoparticles, carbon nanoparticles, and hybrid nanoparticles for use in PTT of breast cancer.

Genosensors as an alternative diagnostic sensing approaches for specific detection of various certain viruses: a review of common techniques and outcomes

Viral infections are responsible for the deaths of millions of people throughout the world. Since outbreak of highly contagious and mutant viruses such as contemporary sars-cov-2 pandemic, has challenged the conventional diagnostic methods, the entity of a thoroughly sensitive, specific, rapid and inexpensive detecting technique with minimum level of false-positivity or -negativity, is desperately needed more than any time in the past decades. Biosensors as minimized devices could detect viruses in simple formats. So far, various nucleic acid, immune- and protein-based biosensors were designed and tested for recognizing the genome, antigen, or protein level of viruses, respectively; however, nucleic acid-based sensing techniques, which is the foundation of constructing genosensors, are preferred not only because of their ultra-sensitivity and applicability in the early stages of infections but also for their ability to differentiate various strains of the same virus. To date, the review articles related to genosensors are just confined to particular pathogenic diseases; In this regard, the present review covers comprehensive information of the research progress of the electrochemical, optical, and surface plasmon resonance (SPR) genosensors that applied for human viruses' diseases detection and also provides a well description of viruses' clinical importance, the conventional diagnosis approaches of viruses and their disadvantages. This review would address the limitations in the current developments as well as the future challenges involved in the successful construction of sensing approaches with the functionalized nanomaterials and also allow exploring into core-research works regarding this area.

A PCR-free genosensing platform for detection of Shigella dysenteriae in human plasma samples by porous and honeycomb-like biochar decorated with ultrathin flower-like MoS2 nanosheets incorporated with Au nanoparticles

Shigella dysenteriae, a gram-negative bacterium, which results in the most infectious of bacterial shigellosis and dysenteries. In this study, an innovative gene detection platform based on label-free DNA sequences was developed to detect Shigella dysenteriae in human plasma samples. The porous and honeycomb-like structure of biochar (BC) was first synthesized through a pyrolysis process. Then, the produced biochar was effectively decorated with flower-like MoS₂ nanosheets (MoS₂/BC). The resulting nanocomposite was incorporated with Au nanoparticles (AuNPs) by applying chronoamperometry technique, and then the subsequent product including MoS₂ nanosheets, biochar and AuNPs were immobilized on the Au electrode surface and used for modifier agent in electrochemical bio-assays. Structural and morphological study of the synthesized compounds were investigated using various characterization methods such as FE-SEM, TEM, EDS, FTIR, and XRD. Various electrochemical techniques including cyclic voltammetry (CV) and Differential pulse anodic stripping voltammetry (DPASV) have been used to investigate the applicability of the fabricated genosensing bio-assay. Under optimal conditions, LOD and LOQ were calculated 9.14 fM and 0.018 pM respectively. In addition, a linear range from 0.01 to 100 pM was obtained for single stranded-target DNA (ss-tDNA), with R² of 0.9992. The recoveries ranged from 98.0 to 101.3%. The fabricated bio-detection assay demonstrated high selectivity for 1, 2, and 3 base mismatch sequences. In addition, a negative control of the gene detection platform which was performed to study selectivity was provided by ss-tDNA from Haemophilusinfluenzae, and Salmonella typhimurium. Moreover, it is important to mention that the organized bioassay is simply reusable and reproducible with the RSD% (relative standard deviation) ˂ 5 to next detection assays.

Bimetallic Fe/Mn MOFs/MβCD/AuNPs stabilized on MWCNTs for developing a label-free DNA-based genosensing bio-assay applied in the determination of Salmonella typhimurium in milk samples

Monitoring of pathogenic bacteria plays a vital role in precluding foodborne disease outbreaks. In this research work, a genosensor based on innovative label-free DNA was developed for the detection of Salmonella. typhimurium (S. typhimurium) in the milk samples. To realize this objective, bimetallic Fe/Mn MOF is synthesized and mixed with methyl-β-cyclodextrin (MβCD) and AuNPs which are then stabilized on multi-walled carbon nanotubes (MWCNTs), and the obtained nanocomposite is immobilized on the Au electrode surface. Different characterization methods such as FE-SEM, TEM, EDS, FTIR, and XRD were used for investigating the particle size and morphological features. Electrochemical and impedimetric techniques were used for exploring the applicability of the fabricated genosensor. Under optimal circumstances, LOD and LOQ have acquired at 0.07 pM and 0.21 pM. Moreover, an extensive linear range of 1 pM-1 μM was resulted for ss-tDNA (single-stranded target DNA), R² obtained 0.9991. The recoveries were obtained 95.6-104%. Great selectivity against one, two, and three-base mismatched sequences was also shown for fabricated biosensing assay. Furthermore, negative genosensing assay control for investigating selectivity was provided by the ss-tDNAs of Haemophilusinfluenzae and Shigella dysenteriae bacteria. Well-fabricated genosensing bio-assay represents better performance, great specificity, high sensitivity, increased active sites, and finally results in an increase in the electron transfer rate. It is to be noted that the organized genosensing bio-assay is capable of being re-used and re-generated in a straightforward manner to estimate the hybridization process.

Carbon nanotubes in COVID-19: A critical review and prospects

The rapid spread of Severe Acute Respiratory Syndrome-Coronavirus 2 (SARS-CoV-2) around the world has ravaged both global health and economy. This unprecedented situation has thus garnered attention globally. This further necessitated the deployment of an effective strategy for rapid and patient-compliant identification and isolation of patients tested positive for SARS-CoV-2. Following this, several companies and institutions across the globe are striving hard to develop real-time methods, like biosensors for the detection of various viral components including antibodies, antigens, ribonucleic acid (RNA), or the whole virus. This article attempts to review the various, mechanisms, advantages and limitations of the common biosensors currently being employed for detection. Additionally, it also summarizes recent advancements in various walks of fighting COVID-19, including its prevention, diagnosis and treatment.

Lateral flow assays (LFA) as an alternative medical diagnosis method for detection of virus species: The intertwine of nanotechnology with sensing strategies

Viruses are responsible for multiple infections in humans that impose huge health burdens on individuals and populations worldwide. Therefore, numerous diagnostic methods and strategies have been developed for prevention, management, and decreasing the burden of viral diseases, each having its advantages and limitations. Viral infections are commonly detected using serological and nucleic acid-based methods. However, these conventional and clinical approaches have some limitations that can be resolved by implementing other detector devices. Therefore, the search for sensitive, selective, portable, and costless approaches as efficient alternative clinical methods for point of care testing (POCT) analysis has gained much attention in recent years. POCT is one of the ultimate goals in virus detection, and thus, the tests need to be rapid, specific, sensitive, accessible, and user-friendly. In this review, after a brief overview of viruses and their characteristics, the conventional viral detection methods, the clinical approaches, and their advantages and shortcomings are firstly explained. Then, LFA systems working principles, benefits, classification are discussed. Furthermore, the studies regarding designing and employing LFAs in diagnosing different types of viruses, especially SARS-CoV-2 as a main concern worldwide and innovations in the LFAs' approaches and designs, are comprehensively discussed here. Furthermore, several strategies addressed in some studies for overcoming LFA limitations like low sensitivity are reviewed. Numerous techniques are adopted to increase sensitivity and perform quantitative detection. Employing several visualization methods, using different labeling reporters, integrating LFAs with other detection methods to benefit from both LFA and the integrated detection device advantages, and designing unique membranes to increase reagent reactivity, are some of the approaches that are highlighted.

Preparation, Characterization, and In Vitro/In Vivo Evaluation of 3-O-β-D-Galactosylated Resveratrol-Loaded Polydopamine Nanoparticles

3-O-β-D-galactosylated resveratrol (Gal-Res) was synthesized from resveratrol (Res) and 3-O-β-D-galactose (Gal) in our previous study. In order to improve the pH sensitivity and bioavailability of Gal-Res, Gal-Res nanoparticles (Gal-Res NPs) were prepared using polydopamine (PDA) as a drug carrier. The drug loading (DL %) and entrapment efficiency (EE %) of Gal-Res NPs were 46.80% and 88.06%. The average particle size, polydispersity index (PDI), and Zeta potential of Gal-Res NPs were 179.38 ± 2.83 nm, 0.129 ± 0.013, and - 28.05 ± 0.36 mV, respectively. The transmission electron microscope (TEM) showed that Gal-Res NPs had uniform spherical morphology. Compared with the fast release of raw Gal-Res, the in vitro release of Gal-Res NPs was slow and pH-sensitive. The results of the blood vessel irritation and hemolysis test demonstrated that Gal-Res NPs had good hemocompatibility. The pharmacokinetics study in rats showed that area under the curve of plasma drug concentration time (AUC_0→600) and half-life (t_1/2) of Gal-Res NPs were enhanced 1.82-fold and 2.19-fold higher than those of raw Gal-Res. The in vivo biodistribution results showed that Gal-Res NPs were more distributed in liver tissue than Gal-Res. Gal-Res NPs with high bioavailability and liver accumulation were hopeful drug delivery systems (DDS) to treat liver diseases.

da Silva Alves D, Okeke C, Breslin CB. Cyclodextrins as Supramolecular Recognition Systems: Applications in the Fabrication of Electrochemical Sensors

Supramolecular chemistry, although focused mainly on noncovalent intermolecular and intramolecular interactions, which are considerably weaker than covalent interactions, can be employed to fabricate sensors with a remarkable affinity for a target analyte. In this review the development of cyclodextrin-based electrochemical sensors is described and discussed. Following a short introduction to the general properties of cyclodextrins and their ability to form inclusion complexes, the cyclodextrin-based sensors are introduced. This includes the combination of cyclodextrins with reduced graphene oxide, carbon nanotubes, conducting polymers, enzymes and aptamers, and electropolymerized cyclodextrin films. The applications of these materials as chiral recognition agents and biosensors and in the electrochemical detection of environmental contaminants, biomolecules and amino acids, drugs and flavonoids are reviewed and compared. Based on the papers reviewed, it is clear that cyclodextrins are promising molecular recognition agents in the creation of electrochemical sensors, chiral sensors, and biosensors. Moreover, they have been combined with a host of materials to enhance the detection of the target analytes. Nevertheless, challenges remain, including the development of more robust methods for the integration of cyclodextrins into the sensing unit.

A long-term controlled drug-delivery with anionic beta cyclodextrin complex in layer-by-layer coating for percutaneous implants devices

This study demonstrated a drug-delivery system with anionic beta cyclodextrin (β-CD) complexes to retain tetracycline (TC) and control its release from multilayers of poly(acrylic acid) (PAA) and poly(l-lysine) (PLL) in a ten double layers ([PAA/PLL]₁₀) coating onto titanium. The drug-delivery capacity of the multilayer system was proven by controlled drug release over 15 days and sustained released over 30 days. Qualitative images confirmed TC retention within the layer-by-layer (LbL) over 30 days of incubation. Antibacterial activity of TC/anionic β-CD released from the LbL was established against Staphylococcus aureus species. Remarkably, [PAA/PLL]₁₀/TC/anionic β-CD antibacterial effect was sustained even after 30 days of incubation. The non-cytotoxic effect of the multilayer system revealed normal human gingival fibroblast growth. It is expected that this novel approach and the chemical concept to improve drug incorporation into the multilayer system will open up possibilities to make the drug release system more applicable to implantable percutaneous devices.

A voltammetric sensor based on reduced graphene oxide-hemin-Ag nanocomposites for sensitive determination of tyrosine

A novel voltammetric sensor was designed and used for the determination of l-tyrosine (l-Tyr) by surface modification of a glassy carbon electrode with reduced graphene oxide-hemin-Ag (rGO-H-Ag) nanocomposites. The nanocomposites were synthesized by a facile one-pot hydrothermal method and characterized by means of transmission electron microscopy and Raman spectroscopy. The determination of l-Tyr was investigated by cyclic voltammetry and further quantified using differential pulse voltammetry. The results revealed a significant enhanced electrochemical oxidation effect for l-Tyr at the nanocomposites modified electrode. Two linear ranges from 0.1 to 100 μM and 100 to 1000 μM as well as a low detection limit of 30 nM (S/N = 3) were obtained. In addition, the sensor also demonstrated good selectivity, reproducibility and stability.

A novel electrochemical sensor for the sensitive determination of l-Tyr was designed with a rGO-H-Ag nanocomposite modified electrode.

Why Not Glycine Electrochemical Biosensors?

Glycine monitoring is gaining importance as a biomarker in clinical analysis due to its involvement in multiple physiological functions, which results in glycine being one of the most analyzed biomolecules for diagnostics. This growing demand requires faster and more reliable, while affordable, analytical methods that can replace the current gold standard for glycine detection, which is based on sample extraction with subsequent use of liquid chromatography or fluorometric kits for its quantification in centralized laboratories. This work discusses electrochemical sensors and biosensors as an alternative option, focusing on their potential application for glycine determination in blood, urine, and cerebrospinal fluid, the three most widely used matrices for glycine analysis with clinical meaning. For electrochemical sensors, voltammetry/amperometry is the preferred readout (10 of the 13 papers collected in this review) and metal-based redox mediator modification is the predominant approach for electrode fabrication (11 of the 13 papers). However, none of the reported electrochemical sensors fulfill the requirements for direct analysis of biological fluids, most of them lacking appropriate selectivity, linear range of response, and/or capability of measuring at physiological conditions. Enhanced selectivity has been recently reported using biosensors (with an enzyme element in the electrode design), although this is still a very incipient approach. Currently, despite the benefits of electrochemistry, only optical biosensors have been successfully reported for glycine detection and, from all the inspected works, it is clear that bioengineering efforts will play a key role in the embellishment of selectivity and storage stability of the sensing element in the sensor.

Facile Synthesis of Eggshell Membrane-Templated Au/CeO2 3D Nanocomposite Networks for Nonenzymatic Electrochemical Dopamine Sensor

Dopamine acts as a neurotransmitter to regulate a variety of physiological functions of the central nervous system. Thus, the fabrication of electrochemical active nanomaterials for sensitive dopamine detection is extremely important for human health. Herein, we constructed a highly efficient dopamine nonenzymatic biosensor using eggshell membrane (ESM) as a 3D network-like carrier-loaded Au and CeO₂ nanocomposites. This approach has led to the uniform distribution of CeO₂ and Au nanoparticles on the surface of ESM. The structure and properties of the as-prepared ESM templated Au/CeO₂ (ESM-AC) nanocomposites were characterized. The electrochemical properties of non-enzymatic oxidation of dopamine by ESM-AC electrode were studied by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The detection limit of the ESM-AC modified electrode for dopamine is 0.26 μM with a linear range from 0.1 to 10 mM. The ESM-AC-modified electrode performs a higher catalytic activity for dopamine electrocatalytic oxidation than that ESM-templated CeO₂ (ESM-C) electrode, which is mainly due to the unique structure of ESM and more active sites provided from Au. Collectively, this biological waste-ESM provides a cheap and unique template for the preparation of 3D network-like nanostructures and expands the application in electrochemical dopamine detection. ESM-AC nanocomposites prepared from biological waste was successfully modified on the surface of glassy carbon electrode and a dopamine-based electrochemical biosensor was constructed.

Polydopamine-assisted attachment of β-cyclodextrin onto iron oxide/silica core-shell nanoparticles for magnetic dispersive solid phase extraction of aromatic molecules from environmental water samples

Pollution monitoring in a contaminated environmental water samples is a big challenge. In this article, immobilization of β-cyclodextrin molecules onto the magnetic core-shell silica nanoparticles was conducted by using adhesive properties of polydopamine. The synthesis path was included of three steps: producing Fe₃O₄ nanoparticles as a core, coating the cores with a silica layer, and further coating with β-cyclodextrin molecules. The structural characteristics of the synthesized nanocomposite were investigated by using attenuated total reflection-Fourier transform infrared spectroscopy, x-ray diffraction analysis, field emission scanning microscopy, transmission electron microscopy, dynamic light scattering, vibrating-sample magnetometer and energy-dispersive X-ray spectroscopy. Afterwards, obtained nanocomposite was used to extract eight polycyclic aromatic hydrocarbons from environmental water samples. Results were demonstrated that analyts with different chemical structures had different extraction manners during the process. Important effective parameters on the extraction efficiency; such as sorbent type and mass, desorption solvent (type and volume), salt concentration and the time of extraction & desorption; were investigated. Under the optimum operating conditions, good linearity within the range of 1-1000 ng/mL was obtained while coefficient of determination (r²) was in the range of 0.990-0.998. The limits of detection were between 0.04 and 0.57 ng/mL, and the enrichment factor was found to be 21-90. This nanocomposite was also applied for the extraction and enrichment of aromatic analytes from the canal and rain water samples prior to gas chromatography analysis.

Rational design of an "on-off-on" fluorescent switch for Cu2+ and histidine based on chiral macrocyclic dioxopolyamine

A novel chemosensor 1 having a chiral macrocyclic dioxopolyamine of C₂ symmetry as a receptor and anthracene as a signal unit has been designed and synthesized for cations and α-amino acids recognition in DMSO-HEPES buffer (1:9, v/v, pH 7.2). The ligand exhibited selective response to Cu²⁺ even in the presence of other metal ions with a fluorescence "switch-off" behavior. Additionally, the in situ generated 1-Cu²⁺ ensemble displayed specific recognition to histidine by a "switch-on" fluorescence response. For this dual functional switch, its sensing behavior via a displacement mode was confirmed by ¹H NMR titration and ESI mass spectroscopy. Sequential "on-off-on" fluorescence responses of 1 to Cu²⁺ and histidine are successfully applied in HeLa cells.

Evaluation of Flavonoid Derivative and Doxorubicin Effects in Lung Cancer Cells (A549) Using Differential Pulse Voltammetry Method

Purpose: Electrochemical measurements have prompted the progress as a consequence of their affectability, cost-affectivity and comparatively short examination time. The aim of this study was the fast evaluation of the effect of chemotherapy compounds on the viability of lung cancer cells (A549) via electrochemical methods. Methods: Cyclic voltammetry (CV) was used as a primary method to distinguish between electrochemical behavior of normal and lung cancer cells. Differential pulse voltammetry (DPV) was employed as a complementary analyses method for the impact of doxorubicin (DOX) and Flavonoid modified drug (FMD) (US patent Application number: 62548886) on Lung cancer cells. Results: Only one oxidative peak, at approximately -0.15 V was detected through DPV method in cancer cell line. While a significant distinguish was not seen in CV. The current intensity (I) was decreased in cancer cells with increasing the DOX and FMD levels (t=99.027, α=0.05, P=0.0000), (t=135.513, α=0.05, P=0.0000), respectively. Conclusion: The movement of cancerous cells towards death through chemotherapy drugs such as DOX and FMD can make distinct and significant changes in the electrochemical behaviors of those cells.

Non-enzymatic Determination of L-Proline Amino Acid in Unprocessed Human Plasma Sample Using Hybrid of Graphene Quantum Dots Decorated with Gold Nanoparticles and Poly Cysteine: A Novel Signal Amplification Strategy

An innovative electrochemical interface for quantitation of L-proline (L-Pro) based on ternary amplification strategy was fabricated. In this work, gold nanoparticles prepared by soft template methodology were immobilized onto green and biocompatible nanocomposite containing poly as a conductive matrix and graphene quantum dots as the amplification element. Therefore, a novel multilayer film based on poly-L-cysteine, graphene quantum dots (GQDs), and gold nanoparticles (GNPs) was exploited to develop a highly sensitive electrochemical sensor for the detection of L-Pro. Fully electrochemical methodology was used to prepare a new transducer on a glassy carbon electrode, which provided a high surface area towards sensitive detection of L-Pro. The prepared electrode was employed for the detection of L-Pro. Under optimized conditions, the calibration curve for L-Pro concentration was linear in 0.5 nM - 10 mM with a low limit of quantification of 0.1 nM. The practical analytical utility of the modified electrode was illustrated by determination of L-Pro in unprocessed human plasma samples.

Electrochemical recognition of taurine biomarker in unprocessed human plasma samples using silver nanoparticlebased nanocomposite: A new platform for early stage diagnosis of neurodegenerative diseases of the nervous system

The rapid and accurate determination of the level of taurine biomarker in various tissues and body fluids can be of great interest in the early diagnosis of several important pathologies and diseases. In the present study, an innovative electrochemical interface for quantitation of taurine based on ternary signal amplification strategy was fabricated. In this work, silver nanoparticles were electrodeposited onto green and biocompatible nanocomposite containing α-cyclodextrin as conductive matrix. Therefore, a double layer film based on α-cyclodextrin and silver nanoparticles was exploited to develop a highly sensitive electrochemical sensor for detection of taurine. Fully electrochemical methodology was used to prepare a transducer on a glassy carbon electrode which provided a high surface area towards sensitive detection of taurine biomarker. The surface morphology of electrode surface was characterized by high-resolution field emission scanning electron microscope (FE-SEM). The proposed sensing platform provides a simple tool for taurine detection. The calibration curve for taurine concentration was linear in 0.7 nM to 0.1 mM with low limit of quantification of 0.7 nM. The practical analytical utility of the modified electrode was illustrated by determination of taurine in unprocessed human plasma samples with recovery of 90.8% to 104%.

Nanomaterial-based biosensors for detection of pathogenic virus

Viruses are real menace to human safety that cause devastating viral disease. The high prevalence of these diseases is due to improper detecting tools. Therefore, there is a remarkable demand to identify viruses in a fast, selective and accurate way. Several biosensors have been designed and commercialized for detection of pathogenic viruses. However, they present many challenges. Nanotechnology overcomes these challenges and performs direct detection of molecular targets in real time. In this overview, studies concerning nanotechnology-based biosensors for pathogenic virus detection have been summarized, paying special attention to biosensors based on graphene oxide, silica, carbon nanotubes, gold, silver, zinc oxide and magnetic nanoparticles, which could pave the way to detect viral diseases and provide healthy life for infected patients.