Fully glutathione degradable waterborne polyurethane nanocarriers: Preparation, redox-sensitivity, and triggered intracellular drug release

High-Molecular-Weight and Light-Colored Disulfide-Bond-Embedded Polyesters: Accelerated Hydrolysis Triggered by Redox Responsiveness

Disulfide bonds have attracted considerable attention due to their reduction responsiveness, but it is crucial and challenging to prepare disulfide-bond-based polyesters by melt polycondensation. Herein, the inherently poor thermal stability of the S-S bond in melting polycondensation was overcome. Moreover, poly(butylene succinate-co-dithiodipropionate) (PBSDi) with a light color and high molecular weights (Mn values up to 84.7 kg/mol) was obtained. These polyesters can be applied via melt processing with Td,5% > 318 °C. PBSDi10-PBSDi40 shows good crystallizability (crystallinity 56-38%) and compact lamellar thickness (2.9-3.2 nm). Compared with commercial poly(butylene adipate-co-terephthalate) (PBAT), the elevated mechanical and barrier performances of PBSDi make them better packaging materials. For the degradation behavior, the disulfide monomer obviously accelerates the enzyme degradation but has a weaker effect on hydrolysis. In 0.1 mol/L or higher concentrations of H2O2 solutions, the oxidation of disulfide bonds to sulfoxide and sulfone groups can be realized. This process results in a stronger nucleophilic attack, as confirmed by the Fukui function and DFT calculations. Additionally, the greater polarity and hydrophilicity of oxidation products, proved by noncovalent interaction analysis, accelerate the hydrolysis of polyesters. Moreover, glutathione-responsive breakage, from polymers to oligomers, is confirmed by an accelerated decline in molecular weight. Our research offers fresh perspectives on the effective synthesis of the disulfide polyester and lays a solid basis for the creation of high-performance biodegradable polyesters that degrade on demand.

Waterborne polyurethane magnetic nanomicelles with magnetically governed functions for breast cancer therapy

Drug delivery strategies aim to maximize a drug's therapeutic efficiency by increasing the drug's concentration at the target site while minimizing delivery to off-target tissues. There is a great deal of interest in using magnetic nanoparticles in combination with applied magnetic fields to selectively control drug accumulation and release in target tissue while minimizing effects on other tissues. In this study, a magnetic targeted drug delivery system based on waterborne polyurethane nanomicelles was prepared by encapsulating hydrophobic doxorubicin (DOX, model drug) and hydrophobic oleic acid-superparamagnetic nanoparticles (SPION-OA) into the hydrophobic core of waterborne polyurethane micelles (CPUM) using the solvent evaporation method. The prepared drug-loaded magnetomicelles (CPUM-DOX-SPION) had a spherical shape with an average diameter of 158 nm. The magnetomicelles showed superparamagnetic properties with excellent magnetic resonance imaging (MRI) contrast effects and T2 relaxation in vitro. In the absence and presence of a magnetic field, the cytocompatibility and cellular uptake of the samples were assessed by MTT assay and flow cytometry, respectively, and the cells were imaged with a confocal microscope. Application of the magnetic field increased cellular cytotoxicity and cellular uptake in association with improved DOX delivery. In addition, the in vivo study of tumor volume showed that tumor growth of the mice group treated with CPUM-DOX-SPION in the presence of an external magnetic field was significantly retarded, with no apparent loss of body weight, compared with the same magnetomicelles in the absence of the magnetic field and with free DOX at the same dose. Moreover, the in vivo MRI experiment indicated the potential of these magnetomicelles as a probe in MRI diagnosis for tumor targeting, and the results showed that magnetically guided delivery of CPUM-SPION magnetomicelles into tumors could significantly improve the targeting efficacy. All the results suggest that the prepared novel magnetomicelles will be promising theranostic systems for effective magnetically guided delivery of chemotherapeutic agents and image-guided personalized medicine.

Bio-based polyurethane aqueous dispersions

With the advances of green chemistry and nanoscience, the synthesis of green, homogenous bio-based waterborne polyurethane (WPU) dispersions with high performance have gained great attention. The presented chapter deals with the recent synthesis of waterborne polyurethane with the biomass, especially the vegetable oils including castor oil, soybean oil, sunflower oil, linseed oil, jatropha oil, and palm oil, etc. Meanwhile, the other biomasses, such as cellulose, starch, lignin, chitosan, etc., have also been illustrated with the significant application in preparing polyurethane dispersions. The idea was to highlight the main vegetable oil-based polyols, and the isocyanate, diols as chain extenders, which have supplied a class of raw materials in WPU. The conversion of biomasses into active chemical agents, which can be used in synthesis of WPU, has been discussed in detail. The main mechanisms and methods are also presented. It is suggested that the epoxide ring opening method is still the main route to transform vegetable oils to polyols. Furthermore, the nonisocyanate WPU may be one of the main trends for development of WPU using biomasses, especially the abundant vegetable oils.

Biobased polyurethanes for biomedical applications

Polyurethanes (PUs) are a major family of polymers displaying a wide spectrum of physico-chemical, mechanical and structural properties for a large range of fields. They have shown suitable for biomedical applications and are used in this domain since decades. The current variety of biomass available has extended the diversity of starting materials for the elaboration of new biobased macromolecular architectures, allowing the development of biobased PUs with advanced properties such as controlled biotic and abiotic degradation. In this frame, new tunable biomedical devices have been successfully designed. PU structures with precise tissue biomimicking can be obtained and are adequate for adhesion, proliferation and differentiation of many cell's types. Moreover, new smart shape-memory PUs with adjustable shape-recovery properties have demonstrated promising results for biomedical applications such as wound healing. The fossil-based starting materials substitution for biomedical implants is slowly improving, nonetheless better renewable contents need to be achieved for most PUs to obtain biobased certifications. After a presentation of some PU generalities and an understanding of a biomaterial structure-biocompatibility relationship, recent developments of biobased PUs for non-implantable devices as well as short- and long-term implants are described in detail in this review and compared to more conventional PU structures.

Release of the model drug SR101 from polyurethane nanocapsules in porcine hair follicles triggered by LED-derived low dose UVA light

Hair follicles (HFs) are important drug delivery targets for the therapy of miscellaneous skin diseases and for skin antisepsis. Furthermore, HFs significantly contribute to drug delivery of topically applied substances. Nanoparticulate systems are excellently suited for follicular drug delivery as they entail the opportunity of directed drug transport into HFs. Moreover, they involve the possibility of an intrafollicular drug release initiated by extrinsic or intrinsic trigger mechanisms. In this study, we present a novel preclinical model for an anatomically and temporally targeted intrafollicular drug release. In vitro release kinetics of the model drug sulforhodamine 101 (SR101) from newly synthesized ultraviolet A (UVA)-responsive polyurethane nanocapsules (NCs) were investigated by fluorescence spectroscopy. Low power density UVA radiation provided by a UVA light emitting diode (LED) induced a drug release of over 50% after 2 min. We further utilized confocal laser scanning microscopy (CLSM) to investigate follicular penetration as well as intrafollicular drug release on an ex vivo porcine ear skin model. UVA-responsive degradation of the NCs at a mean follicular penetration depth of 509 ± 104 µm ensured liberation of SR101 in the right place and at the right time. Thus, for the first time a UVA-triggered drug release from NCs within HFs was demonstrated in the present study. Cytotoxicity tests revealed that NCs synthesized with isophorone diisocyanate show sufficient biocompatibility after UVA-induced cleavage. A considerable and controllable release of various water-soluble therapeutics could be reached by means of the presented system without risking any radiation-related tissue damage. Therefore, the implementation of the presented system into clinical routine, e.g. for preoperative antisepsis of HFs, appears very promising.

Recent advances in tissue engineering scaffolds based on polyurethane and modified polyurethane

Organ repair, regeneration, and transplantation are constantly in demand due to various acute, chronic, congenital, and infectious diseases. Apart from traditional remedies, tissue engineering (TE) is among the most effective methods for the repair of damaged tissues via merging the cells, growth factors, and scaffolds. With regards to TE scaffold fabrication technology, polyurethane (PU), a high-performance medical grade synthetic polymer and bioactive material has gained significant attention. PU possesses exclusive biocompatibility, biodegradability, and modifiable chemical, mechanical and thermal properties, owing to its unique structure-properties relationship. During the past few decades, PU TE scaffold bioactive properties have been incorporated or enhanced with biodegradable, electroactive, surface-functionalised, ayurvedic products, ceramics, glass, growth factors, metals, and natural polymers, resulting in the formation of modified polyurethanes (MPUs). This review focuses on the recent advances of PU/MPU scaffolds, especially on the biomedical applications in soft and hard tissue engineering and regenerative medicine. The scientific issues with regards to the PU/MPU scaffolds, such as biodegradation, electroactivity, surface functionalisation, and incorporation of active moieties are also highlighted along with some suggestions for future work.

Sustained delivery of olanzapine from sunflower oil-based polyol-urethane nanoparticles synthesised through a cyclic carbonate ring-opening reaction

The forefront horizon of biomedical investigations in recent decades is parcelling-up and delivery of drugs to achieve controlled/targeted release. In this regard, developing green-based delivery systems for a spatiotemporal controlling therapeutic agent have drawn a lot of attention. A facile route based on cyclic carbonate ring-opening reaction has been utilised to synthesise a bio-based polyol-containing urethane bond [polyol-urethane (POU)] as a nanoparticulate drug delivery system of olanzapine in order to enhance its bioavailability. After characterisation, the nanoparticles were also estimated for in vitro release, toxicity, and pharmacokinetic studies. As olanzapine has shown poor bioavailability and permeability in the brain, the sustained release of olanzapine from the designed carriers could enhance pharmacokinetic effectiveness. POU in the aqueous solution formed micelles with a hydrophobic core and embedded olanzapine under the influence of its hydrophobic nature. Drug release from the nanoparticles (90 ± 0.43 nm in diameter) indicated a specific pattern with initial burst release, and then a sustained release behaviour (82 ± 3% after 168 h), by the Higuchi-based release mechanism. Pharmacokinetics assessments of POU-olanzapine nanoparticles were carried in male Wistar rats through intravenous administration. The obtained results paved a way to introduce the POU as an efficient platform to enhance the bioavailability of olanzapine in therapeutic methods.

Waterborne poly(urethane-urea)s films as a sustained release system for ketoconazole

Ketoconazole (KTZ) was incorporated in waterborne poly(urethane-urea)s dispersions (WPUU), aiming at the production of films for drug sustained release. Dispersions based on poly(ethylene glycol-block-propylene glycol) (PEG-b-PPG) (four monomers with different contents of PEG hydrophilic segments), poly(propylene glycol), isophorone diisocyanate, dime-thylolpropionic acid and hydrazine were produced and characterized by apparent viscosity and average particle size (APS). Cast films-drug interaction was investigated by Fourier-Transform infrared spectrometry (FTIR). In vitro dissolution assays were performed in simulated gastrointestinal juices, followed by application of kinetic models. Stable pseudoplastic dispersions, with APS between 27 to 320 nm were obtained. FTIR from KTZ-loaded films indicated interactions between polymer and drug. In vitro release of KTZ was achieved above 80%, notably influenced by PEG-based segments content up to 2 h, followed by sustained release for 8 h. Higuchi’s and first-order equations described the drug kinetic profile, as diffusion of the drug and erosion of the swollen polymer, respectively.

Facile Preparation of Reduction-Responsive Micelles Based on Biodegradable Amphiphilic Polyurethane with Disulfide Bonds in the Backbone

In this paper, we synthesized a biodegradable amphiphilic polymer of polyurethane-polyethylene glycol with disulfide bonds in the main chain (PEG-PU(SS)-PEG). DLS and SEM showed that the polymer could self-assemble into micelles in aqueous solution and could be used to load the hydrophobic anticancer drug DOX. Intriguingly, drug release in vitro indicated that DOX-loaded PEG-PU(SS)-PEG micelles had good stability under the extracellular physiological environment, but the disulfide bonds broke rapidly and DOX was released quickly under the intracellular reducing conditions. CCK-8 assays showed that DOX-loaded PEG-PU(SS)-PEG micelles had a high in vitro antitumor activity in C6 cells, whereas blank PEG-PU(SS)-PEG micelles were nontoxic to C6 cells. It was also found that there was strong and persistent accumulation of DOX-loaded PEG-PU(SS)-PEG as compared with PEG-PU-PEG both by the cell internalization tests and the flow cytometry measurements. Hence, PEG-PU(SS)-PEG micelles will have a potential use for clinical treatment of cancer in the future.

Facile preparation of biodegradable dual stimuli-responsive micelles from waterborne polyurethane for efficient intracellular drug delivery

A novel waterborne polyurethane based on main chain degradation under acidic and reductive conditions of tumors was synthesized.

Advances in Waterborne Polyurethane-Based Biomaterials for Biomedical Applications

Polyurethane (PU) is one of the most popular synthetic elastomers and widely employed in biomedical fields owing to the excellent biocompatibility and hemocompatibility known today. In addition, PU is simply prepared and its mechanical properties such as durability, elasticity, elastomer-like character, fatigue resistance, compliance or tolerance in the body during the healing, can be mediated by modifying the chemical structure. Furthermore, modification of bulk and surface by incorporating biomolecules such as anticoagulant s or biorecognizable groups, or hydrophilic/hydrophobic balance is possible through altering chemical groups for PU structure. Such modifications have been designed to improve the acceptance of implant. For these reason, conventional solventborne (solvent-based) PUs have established the standard for high performance systems, and extensively used in medical devices such as dressings, tubing, antibacterial membrane , catheters to total artificial heart and blood contacting materials, etc. However, waterborne polyurethane (WPU) has been developed to improve the process of dissolving PU materials using toxic organic solvents, in which water is used as a dispersing solvent. The prepared WPU materials have many advantages, briefly (1) zero or very low levels of organic solvents, namely environmental-friendly (2) non-toxic, due to absence of isocyanate residues, and (3) good applicability caused by extensive structure/property diversity as well as an environment-friendly fabrication method resulting in increasing applicability. Therefore, WPUs are being in the spotlight as biomaterials used for biomedical applications . The purpose of this review is to introduce an environmental- friendly synthesis of WPU and consider the manufacturing process and application of WPU and/or WPU based nanocomposites as the viewpoint of biomaterials.

Precise control of drug loading and release of an NSAID–polymer conjugate for long term osteoarthritis intra-articular drug delivery

The synthesis of biocompatible polymer diclofenac conjugates (PDCs) that have a high drug loading and high degree of control over diclofenac (DCF) release is described.