Effect of polymer degradation on prolonged release of paclitaxel from filomicelles of polylactide/poly(ethylene glycol) block copolymers

Comparison of PLLA-PEG and PDLLA-PEG micelles for co-encapsulation of docetaxel and resveratrol

The interest in combining chemosensitizers with cytostatics in cancer therapy is growing, which causes also a need to develop their delivery systems. Example of the combination with beneficial therapeutic effects is docetaxel (Dtx) and resveratrol (Res). Although poly(lactide)-co-poly(ethylene glycol) (PLA-PEG) micelles have been considered as one of the most promising platforms for drug delivery, their properties may depend on the stereoisomeric form of hydrophobic block. Therefore, the aim of this study was evaluation of the effect of PLA block on co-encapsulation and release rate of Dtx and Res, which has not been studied so far. This article presents a comparison of single- (Dtx or Res) and dual-drug (Dtx and Res) loaded micelles obtained from poly(l,l-lactide)-co-poly(ethylene glycol) (PLLA-PEG) and poly(d,l-lactide)-co-poly(ethylene glycol) (PDLLA-PEG). The analyzes of the micelles have been conducted including morphology, drug(s) encapsulation efficiency, intermolecular interactions, in vitro drug release, and cytotoxicity. Differences in drug loading ability and release profile have been observed between Res and Dtx but also depending on the polymer and number of drugs in micelles (single vs. dual loaded). The PLLA-PEG micelles have a significantly higher Dtx encapsulation capacity than PDLLA-PEG micelles. The highest cytotoxicity was shown for Dtx and Res dual-loaded micelles, regardless of the polymer. The findings may be used for selection of PLA-based drug delivery systems containing Dtx and Res.

Evaluation of Ibuprofen Prolonged Release of Biomedical PLA-PEG-PLA Hydrogel via Degradation Mechanism

A micellar hydrogel has long been considered an intelligent hydrophobic drug delivery material. In this study, synthesized PLA₁₇₅₀-PEG₁₇₅₀-PLA₁₇₅₀ micellar hydrogel aims to encapsulate ibuprofen (IBU) in the core PLA hydrophobic of the micelle and prolong the drug release time by an injectable route. The structure and morphology of the PLA₁₇₅₀-PEG₁₇₅₀-PLA₁₇₅₀ copolymer hydrogel were demonstrated by ¹H NMR and TEM data. The hydrogel also achieved a gel state at a high concentration of 25 wt.% under the physiological conditions of the body (37°C, pH 7.4). Besides, the biocompatibility test displayed that the hydrogel slightly affected mice after injection one week and fully recovered after four weeks. Furthermore, the in vitro degradation of the hydrogel showed apparent gel erosion after the first three weeks, which is related to the IBU release rate: slow for the first three weeks and then fast. As a result, the total drug release after three and four weeks was 18 wt.% and 41 wt.%, respectively. However, in the first 24 hours, the amount of the drug released was 10 wt.%, suggesting that the IBU drug diffused from the surface hydrogel to the buffer solution. These show that PLA₁₇₅₀-PEG₁₇₅₀-PLA₁₇₅₀ hydrogel can be a potential IBU drug delivery candidate.

Non-spherical Polymeric Nanocarriers for Therapeutics: The Effect of Shape on Biological Systems and Drug Delivery Properties

This review aims to highlight the importance of particle shape in the design of polymeric nanocarriers for drug delivery systems, along with their size, surface chemistry, density, and rigidity. Current manufacturing methods used to obtain non-spherical polymeric nanocarriers such as filomicelles or nanoworms, nanorods and nanodisks, are firstly described. Then, their interactions with biological barriers are presented, including how shape affects nanoparticle clearance, their biodistribution and targeting. Finally, their drug delivery properties and their therapeutic efficacy, both in vitro and in vivo, are discussed and compared with the characteristics of their spherical counterparts.

Chitosan-based DDSs for pH/hypoxia dual-triggered DOX delivery: Facile morphology modulation for higher in vitro cytotoxicity

The morphology of the drug delivery systems (DDSs) has been recognized to play an important role in their phagocytosis, cellular interaction and distribution. However, it is a technical challenge to simply prepare the non-spherical nanoscaled DDSs. Here, a facile strategy was developed to fabricate the pH/hypoxia dual-responsive nanowires by adding the maleic acid (MAH) and PEG modified chitosan (PEG-SS-CS-MAH) into aqueous solution of DOX. Compared with the PEG-SS-CS-MAH/DOX nanoparticles (NPs) by adding DOX into the PEG-SS-CS-MAH solution, the PEG-SS-CS-MAH/DOX nanowires (NWs) possessed a higher drug loading capacity of 58% and better pH/hypoxia dual-triggered DOX release performance with higher drug release in the simulated tumor intracellular microenvironment but a much lower premature drug leakage in the simulated normal physiological medium. As a result, higher in vitro anti-tumor efficacy was achieved with the PEG-SS-CS-MAH/DOX NWs, demonstrating their promising potential for tumor chemotherapy.

Elongated self-assembled nanocarriers: From molecular organization to therapeutic applications

Self-assembled cylindrical aggregates made of amphiphilic molecules emerged almost 40 years ago. Due to their length up to micrometers, those particles display original physico-chemical properties such as important flexibility and, for concentrated samples, a high viscoelasticity making them suitable for a wide range of industrial applications. However, a quarter of century was needed to successfully take advantage of those improvements towards therapeutic purposes. Since then, a wide diversity of biocompatible materials such as polymers, lipids or peptides, have been developed to design self-assembling elongated drug nanocarriers, suitable for therapeutic or diagnostic applications. More recently, the investigation of the main forces driving the unidirectional growth of these nanodevices allowed a translation toward the formation of pure nanodrugs to avoid the use of unnecessary side materials and the possible toxicity concerns associated.

Cytotoxic effect of targeted biodegradable epothilone B and rapamycin co-loaded nanocarriers on breast cancer cells

The new therapeutic solutions for breast cancer treatment are needed, for example, combined therapy consisted of several drugs that characterize different mechanisms of action and modern drug delivery systems. Therefore, we used combination of epothilone B (EpoB) and rapamycin (Rap) to analyze the cytotoxic effect against breast cancer cells (MCF-7; MDA-MB-231). Also, the effect of drugs co-delivered in bioresorbable micelles functionalized with biotin (PLA-PEG-BIO; poly(lactide)-co-poly(ethylene glycol)-biotin) was studied. The comparison of effects of the mixture of free drugs and the micelles co-loaded with EpoB and Rap revealed a significant decrease in the cell metabolic activity and survival. Moreover, the dual drug-loaded PLA-PEG-BIO micelles enhanced the cytotoxicity of EpoB and Rap against the tested cells as compared with the free drugs. The blank PLA-PEG-BIO micelles did not affect the tested cells. We expect that mixture of EpoB and Rap may be promising in breast cancer treatment and PLA-PEG-BIO micelles as carrier of these two drugs can be applicable for successful targeted delivery.

Apoptosis pathway in the combined treatment of x-ray and 5-FU-loaded triblock copolymer-coated magnetic nanoparticles

Aim: In this study, the effects of ionizing radiation and 5-fluorouracil (5-FU)-loaded triblock copolymer-coated magnetic nanoparticles (NPs) on the induction of apoptosis in HT-29 and HCT-116 were investigated. Materials & methods: The percentage of apoptotic cells and alteration of the expression of apoptotic-related proteins were evaluated in treated cells by flow cytometry and western blot analysis, respectively. Results: Combination treatment with 5-FU and radiation had a stronger effect on decreasing Bcl-2 expression and increasing expression of Bax, cleaved caspase-9, cleaved caspase-3, cleaved PARP compared with each treatment alone. Conclusion: The combination of radiation and triblock copolymer-coated magnetic NPs as 5-FU drug carriers works by triggering apoptosis to improve in vitro treatment efficacy. Additional study may present the NPs as an effective approach for the treatment of colon cancer.

Development of red-light cleavable PEG-PLA nanoparticles as delivery systems for cancer therapy

The development of targeted delivery systems can improve the selectivity of cancer drugs. Additionally, a system that promotes the controlled delivery of the drug triggered by an external stimulus in the exact target tissue is highly desirable. Regarding the light stimulus, the NIR window (650-950 nm) is the most suitable due to its higher capacity of penetration in human tissues and less harmful effects on normal cells. In this work, new red-light-responsive nanoparticles for doxorubicin delivery were developed. The nanoparticles were based on cleavable di-block copolymers of poly(ethylene glycol) (PEG) and poly(lactic acid) (PLA) linked by a red-light sensitive segment (1,2-bis(2-hydroxyethylthio)ethylene, BHETE). The PEG-BHETE-PLA copolymers were synthesized under mild conditions and exhibited a narrow polydispersity. The nanoparticles presented a size between 53 and 133 nm, with a doxorubicin loading capacity between 1.2 and 4.4 wt%. Release study of the encapsulated doxorubicin confirms the light-triggered nanoparticle disassembly process. In vitro cytotoxicity tests in MCF7 cell line, for the light-triggered nanoparticles, showed a decrease in cancer cells' viability higher than 25% compared to non-irradiated cells. Due to the promising results obtained with the light-sensitive PEG-BHETE-PLA nanoparticles, these materials have great potential to be used in drug delivery systems for cancer therapy.

Toward understanding polymer micelle stability: Density ultracentrifugation offers insight into polymer micelle stability in human fluids

Micelles, as a class of drug delivery systems, are underrepresented among United States Food and Drug Administration approved drugs. A lack of clinical translation of these systems may be due to, in part, to a lack of understanding of micelle interactions with biologic fluids following injection. Despite the limited clinical translation, micelles remain an active area of research focus and pre-clinical development. The goal of the present study was to examine the stability of amphiphilic block copolymer micelles in biologic fluids to identify the properties and components of biologic fluids that influence micelle stability. Micelle stability, measured via Förster resonance energy transfer-based fluorescent spectrometry, was complemented with density ultracentrifugation to reveal the colocalized, or dissociated, state of the dye cargo after exposure to human biologic fluids. Polymeric micelles composed of poly(ethylene glycol-block-caprolactone) (mPEG-CL) and poly(ethylene glycol-block-lactide) (mPEG-LA) were unstable in fetal bovine serum, human serum and synovial fluid, with varying levels of instability observed in ascites and pleural fluid. All polymeric micelles exhibited stability in cerebrospinal fluid, highlighting the potential for local cerebro-spinal administration of micelles. Interestingly, mPEG2.2k-CL3.1k and mPEG2k-LA2.7k micelles favored dissolution whereas mPEG5.4k-LA28.5k micelles favored stability. Taken together, our data offers both quantitative and qualitative evidence for micelle stability within human biologic fluids and offers evidence of polymer micelle instability in biologic fluids that is not explained by either total protein content or total unsaturated lipid content. The results help to identify potential sites for local delivery where stability is maintained.

Cytotoxic Effect of Paclitaxel and Lapatinib Co-Delivered in Polylactide-co-Poly(ethylene glycol) Micelles on HER-2-Negative Breast Cancer Cells

To find better strategies to enhance the cytotoxic effect of paclitaxel (PTX) and lapatinib (LAP) against breast cancer cells, we analyzed the efficacy of a novel delivery system containing polylactide-co-poly(ethylene glycol) (PLA-PEG) filomicelles of over 100 nm in length and spherical micelles of approximately 20 nm in diameter. The ¹H NMR measurements confirmed the incorporation of PTX and LAP into micelles. Analysis of the drug release mechanism revealed the diffusion-controlled release of LAP and anomalous transport of PTX. Drug content analysis in lyophilized micelles and micellar solution showed their good storage stability for at least 6 weeks. Blank micelles, LAP-loaded micelles and free LAP did not affect MCF-7 breast cancer cell proliferation, suggesting that the cytotoxicity of PTX-, PTX/LAP-loaded micelles, and the binary mixture of free PTX and LAP was solely caused by PTX. PTX/LAP-loaded micelles showed greater toxicity compared to the binary mixture of PTX and LAP after 48 h and 72 h. Only free PTX alone induced P-gp activity. This study showed the feasibility of using a LAP and PTX combination to overcome MDR in MCF-7 cells, particularly when co-loaded into micelles. We suggest that PTX/LAP micelles can be applicable not only for the therapy of HER-2-positive, but also HER-2-negative breast cancers.

Bioresorbable filomicelles for targeted delivery of betulin derivative - In vitro study

Filomicelles (worm-like micelles) possess high drug loading capacity and long circulation time in the bloodstream. A novel approach can be filomicelles with folic acid (FA) as a targeting moiety. Folate-drug delivery systems can target FA receptors (FAR) that are overexpressed in several human carcinomas, which can potentially maximize therapeutic efficacy while minimizing side effects. The aim of this study was to develop filomicelles from combination of poly(L-lactide)-Jeffamine-folic acid and poly(L-lactide)-poly(ethylene glycol) for delivery of betulin derivative. Phosphate derivative of betulin reveals high cytotoxicity against cancer cells, however its application is restricted due to poor solubility in water. Incorporation into hydrophobic core of micelles can effectively solubilize the drug. Three kinds of micelles were obtained with high drug loading capacity. Based on TEM analysis, the copolymers formed exclusively filomicelles or mixture of filomicelles and spherical micelles. All kinds of micelles provided release of betulin derivative for over 9 days and apart the very initial phase displayed similar release profile. The influence of PLA block on initial burst effect was revealed. The in vitro cytotoxicity of betulin derivative loaded micelles against FAR-positive HeLa cells was confirmed, which proves their usefulness for targeted delivery of cytostatic drug.

PLA-PEG-FA NPs for drug delivery system: Evaluation of carrier micro-structure, degradation and size-cell proliferation relationship

In this paper, the micro-structure of amphiphilic copolymer Polylactic acid-Polyethylene glycol-Folate (PLA-PEG-FA) was studied firstly by a differential scanning calorimetry (DSC). During the process of nanoparticles (NPs) preparation, we found good inter-structure consistency of polymer was the precondition for forming into stable NPs, and those with micro-phase separation structure were prepared of NPs within limits. Hemolytic test and CCK-8 assay results demonstrated the biotoxicity of both NPs and whose leaching liquor was far below related toxicity standards. Two kinds of cell, human breast cancer cell line (MCF-7) and human umbilical vein endothelial cells (EC), showed different manners in test of NPs size-cell proliferation relationship, respectively. Monitored by a nuclear magnetic resonance (NMR) and a gel permeation chromatography (GPC), the degradation behavior of NPs in aqueous solution indicated amide bond break more difficultly than ester bond, and FA classic proton peak disappeared in the third week, meanwhile lactic acid (LA) unit number became 25% of the initial. Finally the NPs was completely degraded in the eighth week. In the whole process, NPs underwent a change from compact to loose state. We hope these results will benefit to improve design of drug delivery system in nanomedicine, which could offer the selection rule for amphiphilic polymer NPs on material and size.