1
|
Mohaghegh H, Assadi Z, Derakhshan A, Masaeli E. Accelerating Full-Thickness Wound Healing with Bacterial Cellulose-Based Multilayer Composites. J Pharm Sci 2024; 113:754-763. [PMID: 37748707 DOI: 10.1016/j.xphs.2023.09.018] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2023] [Revised: 09/20/2023] [Accepted: 09/21/2023] [Indexed: 09/27/2023]
Abstract
Materials that speed up wound healing can be of great benefit to patients and healthcare providers. One-layer dressings, however, have unsatisfactory healing efficacy since it is impossible to use materials with different properties simultaneously, and drug delivery is limited by the depth of penetration. The present study utilized a multilayer wound dressing composed of bacterial cellulose (BC) hydrogel, gelatin/alginate (Gel/Alg) hydrogel, and polycaprolactone (PCL) nanofibers loaded with ciprofloxacin (CIP) to promote the healing process in vivo. The designed dressings showed significant water absorption and sufficient water vapor transmission rate (WVTR) after one week, confirming their ability to absorb wound exudate. Within the first four hours, significant amounts of CIP were released from the drug-containing dressing. Then, between hours 4 and 24, the rate decreased and plateaued on day 9. Both positive and negative bacterial strains were inhibited by the gradual release of CIP, while fibroblasts retained their normal morphology and metabolic activity. Lastly, in vivo tests demonstrated that CIP-loaded multilayer dressings could significantly speed up full-thickness wound healing during 14 days, by reducing inflammation, stimulating re-epithelialization, and enhancing skin regeneration. Our findings indicate that multilayering BC hydrogels with drug-loaded nanofibers provide a promising way to promote wound healing by utilizing all the distinctive properties of these layers.
Collapse
Affiliation(s)
- Homa Mohaghegh
- ACECR Institute of Higher Education (Isfahan Branch) Isfahan, P.O. Box 84175-443, Iran; Department of Animal Biotechnology, Cell Science Research Center, Royan Institute for Biotechnology, ACECR, Isfahan, P.O. Box 81593-58686, Iran
| | - Zahra Assadi
- Department of Animal Biotechnology, Cell Science Research Center, Royan Institute for Biotechnology, ACECR, Isfahan, P.O. Box 81593-58686, Iran
| | - Amin Derakhshan
- Department of Animal Biotechnology, Cell Science Research Center, Royan Institute for Biotechnology, ACECR, Isfahan, P.O. Box 81593-58686, Iran
| | - Elahe Masaeli
- Department of Animal Biotechnology, Cell Science Research Center, Royan Institute for Biotechnology, ACECR, Isfahan, P.O. Box 81593-58686, Iran.
| |
Collapse
|
2
|
Teno J, Pardo-Figuerez M, Evtoski Z, Prieto C, Cabedo L, Lagaron JM. Development of Ciprofloxacin-Loaded Electrospun Yarns of Application Interest as Antimicrobial Surgical Suture Materials. Pharmaceutics 2024; 16:220. [PMID: 38399274 PMCID: PMC10891768 DOI: 10.3390/pharmaceutics16020220] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/05/2024] [Revised: 01/29/2024] [Accepted: 01/31/2024] [Indexed: 02/25/2024] Open
Abstract
Surgical site infections (SSI) occur very frequently during post-operative procedures and are often treated with oral antibiotics, which may cause some side effects. This type of infection could be avoided by encapsulating antimicrobial/anti-inflammatory drugs within the surgical suture materials so that they can more efficiently act on the site of action during wound closure, avoiding post-operative bacterial infection and spreading. This work was aimed at developing novel electrospun bio-based anti-infective fibre-based yarns as novel suture materials for preventing surgical site infections. For this, yarns based on flying intertwined microfibres (1.95 ± 0.22 µm) were fabricated in situ during the electrospinning process using a specially designed yarn collector. The electrospun yarn sutures (diameter 300-500 µm) were made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with different contents of 3HV units and contained ciprofloxacin hydrochloride (CPX) as the antimicrobial active pharmaceutical ingredient (API). The yarns were then analysed by scanning electron microscopy, Fourier transform infrared spectroscopy, wide-angle X-ray scattering, differential scanning calorimetry, and in vitro drug release. The yarns were also analysed in terms of antimicrobial and mechanical properties. The material characterization indicated that the varying polymer molecular architecture affected the attained polymer crystallinity, which was correlated with the different drug-eluting profiles. Moreover, the materials exhibited the inherent stiff behaviour of PHBV, which was further enhanced by the API. Lastly, all the yarn sutures presented antimicrobial properties for a time release of 5 days against both Gram-positive and Gram-negative pathogenic bacteria. The results highlight the potential of the developed antimicrobial electrospun yarns in this study as potential innovative suture materials to prevent surgical infections.
Collapse
Affiliation(s)
- Jorge Teno
- R&D Department, Bioinicia S.L., 46980 Paterna, Spain
| | - Maria Pardo-Figuerez
- Novel Materials and Nanotechnology Group, Institute of Agrochemistry and Food Technology (IATA), Spanish Council for Scientific Research (CSIC), 46980 Paterna, Spain; (M.P.-F.); (Z.E.); (C.P.)
| | - Zoran Evtoski
- Novel Materials and Nanotechnology Group, Institute of Agrochemistry and Food Technology (IATA), Spanish Council for Scientific Research (CSIC), 46980 Paterna, Spain; (M.P.-F.); (Z.E.); (C.P.)
| | - Cristina Prieto
- Novel Materials and Nanotechnology Group, Institute of Agrochemistry and Food Technology (IATA), Spanish Council for Scientific Research (CSIC), 46980 Paterna, Spain; (M.P.-F.); (Z.E.); (C.P.)
| | - Luis Cabedo
- Polymers and Advanced Materials Group (PIMA), School of Technology and Experimental Sciences, Universitat Jaume I (UJI), 12006 Castellón, Spain;
| | - Jose M. Lagaron
- Novel Materials and Nanotechnology Group, Institute of Agrochemistry and Food Technology (IATA), Spanish Council for Scientific Research (CSIC), 46980 Paterna, Spain; (M.P.-F.); (Z.E.); (C.P.)
| |
Collapse
|
3
|
Kazemi MH, Sajadimajd S, Gorgin Karaji Z. In vitro investigation of wound healing performance of PVA/chitosan/silk electrospun mat loaded with deferoxamine and ciprofloxacin. Int J Biol Macromol 2023; 253:126602. [PMID: 37652316 DOI: 10.1016/j.ijbiomac.2023.126602] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/26/2023] [Revised: 08/23/2023] [Accepted: 08/28/2023] [Indexed: 09/02/2023]
Abstract
Electrospinning is an advanced method used for developing wound dressings. Biopolymer-based electrospun mats have been extensively studied in tissue engineering due to their similarity to the extracellular matrix. In this study, electrospun poly(vinyl alcohol)/chitosan/silk fibroin (PChS) mat demonstrated improved mechanical properties, including tensile strength, strain at break, and Young's modulus, compared to electrospun poly(vinyl alcohol) and poly(vinyl alcohol)/chitosan mats. Similarly, the swelling capability, thermal stability, and hydrophilicity were higher in the PChS mat compared to the other ones. Hence, the PChS mat was selected for further investigation. Ciprofloxacin (CIP) was added to the PChS electrospinning solution at 5 % and 10 % concentration, and deferoxamine (DFO) was immobilized on CIP-loaded mats at 1 and 2 g/L concentration using a polydopamine linker. Evaluating mats with the dimensions of 1 × 1 cm2 showed that those containing 5 % and 10 % CIP exhibited bactericidal activity against Escherichia coli and Staphylococcus aureus. Moreover, Human dermal fibroblast cells were compatible with the fabricated mats, as confirmed by the MTT assay. Finally, drug-loaded mats had a positive effect on wound healing in a scratch test, and mats with 10 % CIP and 2 g/L DFO showed the highest effect on promoting wound healing, indicating potential for use as a wound dressing.
Collapse
Affiliation(s)
- Mohammad Hossein Kazemi
- Department of Mechanical Engineering, Faculty of Engineering, Kermanshah University of Technology, Kermanshah 67156-85420, Iran
| | - Soraya Sajadimajd
- Department of Biology, Faculty of Science, Razi University, Kermanshah 67141-15111, Iran
| | - Zahra Gorgin Karaji
- Department of Mechanical Engineering, Faculty of Engineering, Kermanshah University of Technology, Kermanshah 67156-85420, Iran.
| |
Collapse
|
4
|
Firouzi Amandi A, Shahrtash SA, Kalavi S, Moliani A, Mousazadeh H, Rezai Seghin Sara M, Dadashpour M. Fabrication and characterization of metformin-loaded PLGA/Collagen nanofibers for modulation of macrophage polarization for tissue engineering and regenerative medicine. BMC Biotechnol 2023; 23:55. [PMID: 38115008 PMCID: PMC10731790 DOI: 10.1186/s12896-023-00825-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/20/2023] [Accepted: 12/11/2023] [Indexed: 12/21/2023] Open
Abstract
In tissue engineering (TE) and regenerative medicine, the accessibility of engineered scaffolds that modulate inflammatory states is extremely necessary. The aim of the current work was to assess the efficacy of metformin (MET) incorporated in PLGA/Collagen nanofibers (Met-PLGA/Col NFs) to modulate RAW264.7 macrophage phenotype from pro-inflammatory status (M1) to anti-inflammatory status (M2). Given this, MET-PLGA/Col NFs were fabricated using an electrospinning technique. Structural characterization such as morphology, chemical and mechanical properties, and drug discharge pattern were assessed. MTT assay test exposed that MET-PLGA/Col NFs remarkably had increased cell survival in comparison with pure PLGA/Collagen NFs and control (p < 0.05) 72 h after incubation. Based on the qPCR assay, a reduction in the expression of iNOS-2 and SOCS3 was found in the cells seeded on MET-PLGA/Col NFs, demonstrating the substantial modulation of the M1 phenotype to the M2 phenotype. Moreover, it was determined a main decrease in the pro-inflammatory cytokines and mediator's expression but the growth factors amount related to anti-inflammatory M2 were meaningfully upregulated. Finally, MET-PLGA/Col NFs possibly will ensure a beneficial potential for effective variation of the macrophage response from an inflammatory phase (M1) to a pro-regenerative (M2) phase.
Collapse
Affiliation(s)
| | | | - Shaylan Kalavi
- Department of Clinical Pharmacy, Faculty of Pharmacy, Islamic Azad University of Medical Sciences, Tehran, Iran
| | - Afshin Moliani
- Isfahan Medical Students Research Center, Isfahan University of Medical Sciences, Isfahan, Iran
| | - Hanieh Mousazadeh
- Research Institute of Bioscience and Biotechnology, University of Tabriz, Tabriz, Iran
| | | | - Mehdi Dadashpour
- Department of Medical Biotechnology, Faculty of Medicine, Semnan University of Medical Sciences, Semnan, Iran.
| |
Collapse
|
5
|
Atia GA, Shalaby HK, Roomi AB, Ghobashy MM, Attia HA, Mohamed SZ, Abdeen A, Abdo M, Fericean L, Bănățean Dunea I, Atwa AM, Hasan T, Mady W, Abdelkader A, Ali SA, Habotta OA, Azouz RA, Malhat F, Shukry M, Foda T, Dinu S. Macro, Micro, and Nano-Inspired Bioactive Polymeric Biomaterials in Therapeutic, and Regenerative Orofacial Applications. Drug Des Devel Ther 2023; 17:2985-3021. [PMID: 37789970 PMCID: PMC10543943 DOI: 10.2147/dddt.s419361] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/19/2023] [Accepted: 08/12/2023] [Indexed: 10/05/2023] Open
Abstract
Introducing dental polymers has accelerated biotechnological research, advancing tissue engineering, biomaterials development, and drug delivery. Polymers have been utilized effectively in dentistry to build dentures and orthodontic equipment and are key components in the composition of numerous restorative materials. Furthermore, dental polymers have the potential to be employed for medication administration and tissue regeneration. To analyze the influence of polymer-based investigations on practical medical trials, it is required to evaluate the research undertaken in this sector. The present review aims to gather evidence on polymer applications in dental, oral, and maxillofacial reconstruction.
Collapse
Affiliation(s)
- Gamal A Atia
- Department of Oral Medicine, Periodontology, and Diagnosis, Faculty of Dentistry, Suez Canal University, Ismailia, Egypt
| | - Hany K Shalaby
- Department of Oral Medicine, Periodontology and Oral Diagnosis, Faculty of Dentistry, Suez University, Suez, Egypt
| | - Ali B Roomi
- Department of Quality Assurance, University of Thi-Qar, Thi-Qar, Iraq
- Department of Medical Laboratory, College of Health and Medical Technology, National University of Science and Technology, Thi-Qar, Iraq
| | - Mohamed M Ghobashy
- Radiation Research of Polymer Chemistry Department, National Center for Radiation Research and Technology (NCRRT), Atomic Energy Authority, Cairo, Egypt
| | - Hager A Attia
- Department of Molecular Biology and Chemistry, Faculty of Science, Alexandria University, Alexandria, Egypt
| | - Sara Z Mohamed
- Department of Removable Prosthodontics, Faculty of Dentistry, Suez Canal University, Ismailia, Egypt
| | - Ahmed Abdeen
- Department of Forensic Medicine and Toxicology, Faculty of Veterinary Medicine, Benha University, Toukh, Egypt
| | - Mohamed Abdo
- Department of Animal Histology and Anatomy, School of Veterinary Medicine, Badr University in Cairo (BUC), Badr City, Egypt
- Department of Anatomy and Embryology, Faculty of Veterinary Medicine, University of Sadat City, Sadat, Egypt
| | - Liana Fericean
- Department of Biology and Plant Protection, Faculty of Agriculture. University of Life Sciences “King Michael I” from Timișoara, Timișoara, Romania
| | - Ioan Bănățean Dunea
- Department of Biology and Plant Protection, Faculty of Agriculture. University of Life Sciences “King Michael I” from Timișoara, Timișoara, Romania
| | - Ahmed M Atwa
- Department of Pharmacology and Toxicology, Faculty of Pharmacy, Egyptian Russian University, Cairo, Egypt
| | - Tabinda Hasan
- Department of Basic Sciences, College of Medicine, Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia
| | - Wessam Mady
- Center of Excellence in Genomic Medicine Research, King Abdulaziz University, Jeddah, Saudi Arabia
| | - Afaf Abdelkader
- Department of Forensic Medicine and Clinical Toxicology, Faculty of Medicine, Benha University, Benha, Egypt
| | - Susan A Ali
- Department of Radiodiagnosis, Faculty of Medicine, Ain Shams University, Abbassia, 1181, Egypt
| | - Ola A Habotta
- Department of Forensic Medicine and Toxicology, Faculty of Veterinary Medicine, Mansoura University, Mansoura, Egypt
| | - Rehab A Azouz
- Department of Forensic Medicine and Toxicology, Faculty of Veterinary Medicine, Cairo University, Giza, Egypt
| | - Farag Malhat
- Department of Pesticide Residues and Environmental Pollution, Central Agricultural Pesticide Laboratory, Agricultural Research Center, Giza, Egypt
| | - Mustafa Shukry
- Department of Physiology, Faculty of Veterinary Medicine, Kafrelsheikh University, Kafrelsheikh, Egypt
| | - Tarek Foda
- Oral Health Sciences Department, Temple University’s Kornberg School of Dentistry, Philadelphia, PA, USA
| | - Stefania Dinu
- Department of Pedodontics, Faculty of Dental Medicine, Victor Babes University of Medicine and Pharmacy Timisoara, Timisoara, 300041, Romania
| |
Collapse
|
6
|
Rossin ARS, Spessato L, Cardoso FDSL, Caetano J, Caetano W, Radovanovic E, Dragunski DC. Electrospinning in personal protective equipment for healthcare work. Polym Bull (Berl) 2023:1-24. [PMID: 37362955 PMCID: PMC10183089 DOI: 10.1007/s00289-023-04814-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/24/2023] [Revised: 04/30/2023] [Accepted: 05/09/2023] [Indexed: 06/28/2023]
Abstract
Protection in many service areas is mandatory for good performance in daily activities of workers, especially health areas. Personal protective equipment (PPE) is used to protect patients and health workers from contamination by harmful pathogens and body fluids during clinical attendance. The pandemic scenario caused by SARS-CoV-2 has shown that the world is not prepared to face global disease outbreaks, especially when it comes to the PPE of healthcare workers. In the last years, the world has faced a deficiency in the development of advanced technologies to produce high-quality PPE to attend to the exponential increasing demand. Electrospinning is a technology that can be used to produce high-quality PPE by improving the protective action of clothing. In the face of this concern, this manuscript presents as focus the potential of electrospinning to be applied in protective clothing. PPE mostly used by healthcare workers are also presented. The physico-chemical characteristics and production processes of medical textiles for PPE are addressed. Furthermore, an overview of the electrospinning technique is shown. It is important to highlight most research about electrospinning applied to PPE for health areas presents gaps and challenges; thus, future projections are also addressed in this manuscript.
Collapse
Affiliation(s)
- Ariane Regina Souza Rossin
- Department of Chemistry, State University of Maringá, Maringá, Paraná 87020-900 Brazil
- Center of Engineering and Exact Sciences, State University of West Paraná, Toledo, Paraná 85903-000 Brazil
| | - Lucas Spessato
- Department of Chemistry, State University of Maringá, Maringá, Paraná 87020-900 Brazil
| | - Fabiana da Silva Lima Cardoso
- Department of Chemistry, State University of Maringá, Maringá, Paraná 87020-900 Brazil
- Center of Engineering and Exact Sciences, State University of West Paraná, Toledo, Paraná 85903-000 Brazil
| | - Josiane Caetano
- Center of Engineering and Exact Sciences, State University of West Paraná, Toledo, Paraná 85903-000 Brazil
| | - Wilker Caetano
- Department of Chemistry, State University of Maringá, Maringá, Paraná 87020-900 Brazil
| | - Eduardo Radovanovic
- Department of Chemistry, State University of Maringá, Maringá, Paraná 87020-900 Brazil
| | - Douglas Cardoso Dragunski
- Department of Chemistry, State University of Maringá, Maringá, Paraná 87020-900 Brazil
- Center of Engineering and Exact Sciences, State University of West Paraná, Toledo, Paraná 85903-000 Brazil
| |
Collapse
|
7
|
Jabbari F, Babaeipour V. Bacterial cellulose as a potential biopolymer for wound care. A review. INT J POLYM MATER PO 2023. [DOI: 10.1080/00914037.2023.2167080] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
Affiliation(s)
- Farzaneh Jabbari
- Nanotechnology and Advanced Materials Department, Materials and Energy Research Center, Tehran, Iran
| | - Valiollah Babaeipour
- Faculty of Chemistry and Chemical Engineering, Malek Ashtar University of Technology, Tehran, Iran
| |
Collapse
|
8
|
Li J, Chen JN, Peng ZX, Chen NB, Liu CB, Zhang P, Zhang X, Chen GQ. Multifunctional Electrospinning Polyhydroxyalkanoate Fibrous Scaffolds with Antibacterial and Angiogenesis Effects for Accelerating Wound Healing. ACS APPLIED MATERIALS & INTERFACES 2023; 15:364-377. [PMID: 36577512 DOI: 10.1021/acsami.2c16905] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
To treat large-scale wounds or chronic ulcers, it is highly desirable to develop multifunctional wound dressings that integrate antibacterial and angiogenic properties. While many biomaterials have been fabricated as wound dressings for skin regeneration, few reports have addressed the issue of complete skin regeneration due to the lack of vasculature and hair follicles. Herein, an instructive poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P34HB) fibrous wound dressing that integrates an antibacterial ciprofloxacin (CIP) and pro-angiogenic dimethyloxalylglycine (DMOG) is successfully prepared via electrospinning. The resultant dressings exhibit suitable flexibility with tensile strength and elongation at break up to 4.08 ± 0.18 MPa and 354.8 ± 18.4%, respectively. The in vitro results revealed that the groups of P34HB/CIP/DMOG dressings presented excellent biocompatibility on cell proliferation and significantly promote the spread and migration of L929 cells in both transwell and scratch assays. Capillary-like tube formation is also significantly enhanced in the P34HB/CIP/DMOG group dressings. Additionally, dressings from the P34HB/CIP and P34HB/CIP/DMOG groups show a broad spectrum of antimicrobial action against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. In vivo studies further demonstrated that the prepared dressings in the P34HB/CIP/DMOG group not only improved wound closure, increased re-epithelialization and collagen formation, as well as reduced inflammatory response but also increased angiogenesis and remodeling, resulting in complete skin regeneration and hair follicles. Collectively, this work provides a simple but efficient approach for the design of a versatile wound dressing with the potential to have a synergistic effect on the rapid stimulation of angiogenesis as well as antibacterial activity in full-thickness skin repair.
Collapse
Affiliation(s)
- Jian Li
- Shenzhen Engineering Research Center for Medical Bioactive Materials, Center for Translational Medicine Research & Development, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
- University of Chinese Academy of Sciences, Beijing 100049, China
| | - Jiang-Nan Chen
- School of Life Sciences, Center for Synthetic and Systems Biology, Tsinghua University, Beijing 100084, China
- Tsinghua-Peking Center for Life Sciences, Tsinghua University, Beijing 100084, China
| | - Zi-Xin Peng
- Shenzhen Engineering Research Center for Medical Bioactive Materials, Center for Translational Medicine Research & Development, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
| | - Ning-Bo Chen
- Research Laboratory for Biomedical Optics and Molecular Imaging, CAS Key Laboratory of Health Informatics, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China
| | - Cheng-Bo Liu
- Research Laboratory for Biomedical Optics and Molecular Imaging, CAS Key Laboratory of Health Informatics, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China
| | - Peng Zhang
- Shenzhen Engineering Research Center for Medical Bioactive Materials, Center for Translational Medicine Research & Development, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
| | - Xu Zhang
- Tsinghua-Peking Center for Life Sciences, Tsinghua University, Beijing 100084, China
- Key Laboratory of Industrial Biocatalysis, Ministry of Education, Department of Chemical Engineering, Tsinghua University, Beijing 100084, China
| | - Guo-Qiang Chen
- School of Life Sciences, Center for Synthetic and Systems Biology, Tsinghua University, Beijing 100084, China
- Tsinghua-Peking Center for Life Sciences, Tsinghua University, Beijing 100084, China
- Key Laboratory of Industrial Biocatalysis, Ministry of Education, Department of Chemical Engineering, Tsinghua University, Beijing 100084, China
| |
Collapse
|
9
|
Khullar L, Harjai K, Chhibber S. Therapeutic and pro-healing potential of advanced wound dressings loaded with bioactive agents. Future Microbiol 2023; 18:43-63. [PMID: 36537228 DOI: 10.2217/fmb-2022-0162] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022] Open
Abstract
Chronic skin wound infections are inextricably linked with high mortality rates. With the rise in the aging population and the threat of diabetes, obesity and lifestyle-based diseases, the risk incurred from invasive wound pathogens has been ever escalating. Thus, more efficacious wound care management is necessary to cope with such morbid illnesses. A plethora of bioactive agents, such as antibiotics, phytochemicals, essential oils, phages among others, has been exploited to develop wound dressings, raising tremendous interest in their prospective use as wound care products. The present review critically focuses on the therapeutic implications of advanced wound dressings that have assisted in the expansion of regenerative medicine and also discusses the practical concerns that have limited their bench-to-market entry.
Collapse
Affiliation(s)
- Lavanya Khullar
- Department of Microbiology, Panjab University, Chandigarh, India
| | - Kusum Harjai
- Department of Microbiology, Panjab University, Chandigarh, India
| | - Sanjay Chhibber
- Department of Microbiology, Panjab University, Chandigarh, India
| |
Collapse
|
10
|
Aliakbar Ahovan Z, Esmaeili Z, Eftekhari BS, Khosravimelal S, Alehosseini M, Orive G, Dolatshahi-Pirouz A, Pal Singh Chauhan N, Janmey PA, Hashemi A, Kundu SC, Gholipourmalekabadi M. Antibacterial smart hydrogels: New hope for infectious wound management. Mater Today Bio 2022; 17:100499. [PMID: 36466959 PMCID: PMC9709163 DOI: 10.1016/j.mtbio.2022.100499] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/16/2022] [Revised: 10/31/2022] [Accepted: 11/18/2022] [Indexed: 11/21/2022] Open
Abstract
Millions of people die annually due to uncured wound infections. Healthcare systems incur high costs to treat wound infections. Tt is predicted to become more challenging due to the rise of multidrug-resistant conditions. During the last decades, smart antibacterial hydrogels could attract attention as a promising solution, especially for skin wound infections. These antibacterial hydrogels are termed 'smart' due to their response to specific physical and chemical environmental stimuli. To deliver different drugs to particular sites in a controlled manner, various types of crosslinking strategies are used in the manufacturing process. Smart hydrogels are designed to provide antimicrobial agents to the infected sites or are built from polymers with inherent disinfectant properties. This paper aims to critically review recent pre-clinical and clinical advances in using smart hydrogels against skin wound infections and propose the next best thing for future trends. For this purpose, an introduction to skin wound healing and disease is presented and intelligent hydrogels responding to different stimuli are introduced. Finally, the most promising investigations are discussed in their related sections. These studies can pave the way for producing new biomaterials with clinical applications.
Collapse
Affiliation(s)
- Zahra Aliakbar Ahovan
- Department of Microbiology, School of Medicine, Shahid Beheshti University of Medical Sciences, Tehran, Iran
| | - Zahra Esmaeili
- Cellular and Molecular Research Centre, Iran University of Medical Sciences, Tehran, Iran
- Department of Medical Biotechnology, Faculty of Allied Medicine, Iran University of Medical Sciences, Tehran, Iran
| | | | - Sadjad Khosravimelal
- Cellular and Molecular Research Centre, Iran University of Medical Sciences, Tehran, Iran
- Department of Medical Biotechnology, Faculty of Allied Medicine, Iran University of Medical Sciences, Tehran, Iran
| | - Morteza Alehosseini
- Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran
| | - Gorka Orive
- NanoBioCel Research Group, School of Pharmacy, University of the Basque Country (UPV/EHU), Vitoria-Gasteiz, Spain
- Biomedical Research Networking Centre in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN). Vitoria-Gasteiz, Spain
- University Institute for Regenerative Medicine and Oral Implantology - UIRMI (UPV/EHU-Fundación Eduardo Anitua). Vitoria-Gasteiz, Spain
- Bioaraba, NanoBioCel Research Group, Vitoria-Gasteiz, Spain
- Singapore Eye Research Institute, The Academia, 20 College Road, Discovery Tower, Singapore
| | | | | | - Paul A. Janmey
- Bioengineering Department, University of Pennsylvania, Philadelphia, USA
| | - Ali Hashemi
- Department of Microbiology, School of Medicine, Shahid Beheshti University of Medical Sciences, Tehran, Iran
| | - Subhas C. Kundu
- 3Bs Research Group, I3Bs - Research Institute on Biomaterials, Biodegradable and Biomimetics, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, University of Minho, AvePark, Guimaraes, Portugal
| | - Mazaher Gholipourmalekabadi
- Cellular and Molecular Research Centre, Iran University of Medical Sciences, Tehran, Iran
- Department of Medical Biotechnology, Faculty of Allied Medicine, Iran University of Medical Sciences, Tehran, Iran
- Department of Tissue Engineering & Regenerative Medicine, Faculty of Advanced Technologies in Medicine, Iran University of Medical Sciences, Tehran, Iran
| |
Collapse
|
11
|
Evaluation of poly(N-isopropylacrylamide)/tetraphenylethylene/amphotericin B-based visualized antimicrobial nanofiber wound dressing for whole skin wound healing in rats. Heliyon 2022; 8:e12063. [PMID: 36561676 PMCID: PMC9764202 DOI: 10.1016/j.heliyon.2022.e12063] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/02/2022] [Revised: 11/06/2022] [Accepted: 11/25/2022] [Indexed: 12/12/2022] Open
Abstract
The aim of this work is to develop a novel nanofiber wound dressing with multiple functional properties that combines suitable mechanical properties, slow and controlled drug release, antifungal activity, and visual drug monitoring to accelerate wound healing while reducing systemic circulation of the drug, achieving reduced dose and side effects, and achieving patient satisfaction and compliance. In this paper, visualized nanofiber films were prepared using electrostatic spinning technology. This nanofiber wound dressing has soft tissue-like mechanical and antifungal properties and is biocompatible. In particular, the poly(N-isopropylacrylamide) (PNIPAAm)/tetraphenylethylene (TPE)/amphotericin B (AMB) nanofiber films showed good performance in terms of antifungal activity and cytocompatibility compared with medical gauze, and significantly accelerated the wound healing process in a mouse total wound defect model with PCL+PVP+TPE+AMB+PNIPAAm. The wound healing rate of nanofibrous membrane group was 100% at 14 days. In addition, histological analysis, collagen deposition and immunohistochemistry showed, for example, fewer inflammatory cells, more fibroblasts around the damaged area, increased wound epithelial atrophy, reduced granulation tissue, connective tissue reconstruction, epithelial tissue formation, and abundant small angiogenesis in the dermis near the epidermis; a higher level of collagen deposition fraction of 49.97%; and a simultaneous reduction in HIF-1α production and upregulated the expression of CD31. In conclusion, this antifungal nanofiber film showed promising applications throughout the skin wound healing process.
Collapse
|
12
|
Jaberifard F, Ramezani S, Ghorbani M, Arsalani N, Mortazavi Moghadam F. Investigation of wound healing efficiency of multifunctional eudragit/soy protein isolate electrospun nanofiber incorporated with ZnO loaded halloysite nanotubes and allantoin. Int J Pharm 2022; 630:122434. [PMID: 36435502 DOI: 10.1016/j.ijpharm.2022.122434] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/18/2022] [Revised: 11/17/2022] [Accepted: 11/19/2022] [Indexed: 11/25/2022]
Abstract
One significant aspect of the current therapeutic agents employed in wound healing involves the engineering of nano polymeric scaffolds to mimic the properties of extracellular matrix (ECM). The present work aimed to prepare and evaluate Eudragit® L100 (EU) nanofibers in combination with soy protein isolate (SPI). Allantoin (Ala) with a 2 wt% was encapsulated as a model drug renowned for its anti-inflammatory and antioxidant agents. Moreover, the synthesized ZnO-halloysite nanotubes (ZHNTs) with different concentrations of 1, 3, and 5 wt% were incorporated into the EU/SPI/Ala nanofiber as a reinforcing filler and a remarkable antibacterial agent. The scanning electron microscope (SEM) analysis showed that by increasing the weight percentage of SPI from 1 % to 2.5 %, the average diameter of nanofibers decreased from 132.3 ± 51.3 nm to 126.7 ± 47.2 nm. It was 223.5 ± 95.6 nm for nanofibers containing 5 wt% ZHNTs (the optimal sample). The evaluation of in vitro release kinetics of Ala for 24 h, showed a burst release during the first 2 h and a sustained release during the subsequent times. Moreover, the structure, crystallinity, and thermal stability of synthesized nanofibers were characterized by Fourier Transform Infrared Spectrometry (FTIR), X-ray diffraction (XRD), and Thermo gravimetric analysis (TGA), respectively. In vitro degradation and mechanical characteristics of these nanofibers were studied. Furthermore, the capability of the nanofibers for cell proliferation was revealed through the MTT test and field emission scanning electron microscopy (FESEM) images of cell attachment. The antimicrobial activity of EU/SPI/Ala/ZHNTs showed that this sample with high ZHNTs content (5 w%t) had the most remarkable antibacterial activity against S. aureus. The results revealed that EU/SPI/Ala/ZHNTs mats could be promising potential wound dressings.
Collapse
Affiliation(s)
- Farnaz Jaberifard
- Polymer Research Laboratory, Department of Organic and Biochemistry, Faculty of Chemistry, University of Tabriz, Tabriz, Iran; Nutrition Research Center, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Soghra Ramezani
- Nanofiber Research Center, Asian Nanostructures Technology Co. (ANSTCO), Zanjan, Iran
| | - Marjan Ghorbani
- Nutrition Research Center, Tabriz University of Medical Sciences, Tabriz, Iran.
| | - Nasser Arsalani
- Polymer Research Laboratory, Department of Organic and Biochemistry, Faculty of Chemistry, University of Tabriz, Tabriz, Iran.
| | - Fatemeh Mortazavi Moghadam
- Division of Engineering in Medicine, Department of Medicine, Harvard Medical School, Brigham and Women's Hospital, Cambridge, MA 02139, USA
| |
Collapse
|
13
|
Yin H, Song P, Chen X, Huang Q, Huang H. A self-healing hydrogel based on oxidized microcrystalline cellulose and carboxymethyl chitosan as wound dressing material. Int J Biol Macromol 2022; 221:1606-1617. [PMID: 36096253 DOI: 10.1016/j.ijbiomac.2022.09.060] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/03/2022] [Revised: 09/01/2022] [Accepted: 09/07/2022] [Indexed: 01/19/2023]
Abstract
As the food processing by-products, hericium erinaceus residues (HER) and pineapple peel (PP) are good sources of cellulose and chitosan that can be prepared into hydrogels for structuring a drug delivery system. Hydrogel is one new type biomaterial for drug delivery with excellent absorbent ability applied in wound dressing. In this research, one composite self-healing hydrogel with pH sensitivity for drug delivery system based on the Schiff-base reaction was fabricated. Therein aldehyde group of oxidized microcrystalline cellulose (OMCC) from PP were crosslinked with amino group of carboxymethyl chitosan (CMCS) from HER via Schiff-base reaction for structuring hydrogels. The structures of the prepared hydrogels were characterized. Meanwhile, its blood clotting activity and physical properties were investigated. The hydrogels show some favorable performances with suitable gel time (54 s of minimum), distinguish swelling rate (about 31.18 g/g), good mechanical, self-healing characteristic and well coagulation effect. The cumulative release of the rutin-loaded hydrogel OMCM-54 reached about 80 % within 6 h, suggesting the well-controlled release of rutin by crosslinking degree between the modified OMCC and CMCS based on Schiff-base reaction. The novel biomaterial based on hericium erinaceus residues and pineapple peel shows its potential use as wound dressing.
Collapse
Affiliation(s)
- Huishuang Yin
- School of Food Science and Engineering, South China University of Technology, Guangzhou 510641, P.R. China
| | - Peiqin Song
- School of Food Science and Engineering, South China University of Technology, Guangzhou 510641, P.R. China
| | - Xingyu Chen
- School of Food Science and Engineering, South China University of Technology, Guangzhou 510641, P.R. China
| | - Qiuyan Huang
- College of Food Science, South China Agricultural University, Guangzhou 510641, P.R. China
| | - Huihua Huang
- School of Food Science and Engineering, South China University of Technology, Guangzhou 510641, P.R. China.
| |
Collapse
|
14
|
Jari Litany RI, Praseetha PK. Tiny tots for a big-league in wound repair: Tools for tissue regeneration by nanotechniques of today. J Control Release 2022; 349:443-459. [PMID: 35835401 DOI: 10.1016/j.jconrel.2022.07.005] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2022] [Revised: 07/01/2022] [Accepted: 07/04/2022] [Indexed: 12/13/2022]
Abstract
Overall, chronic injuries place considerable burden on patients and health systems. The skin injuries are exposed to inflammatory bacteria and hinder the healing process. The skin being the biggest tissue of the whole body ensures protection against microbial invasion, dehydration, and against chemical, thermal, bright radiations and mechanical agents. When injured, the skin loses its defensive purpose and the attack of bacterial types arises with the loss of protein, water, and electrolytes. Improved wound closure therapy helps to restore normal skin function by managing wounds with the help of a suitable skin replacement. According to the type of wound and its healing ability, an appropriate skin replacement system must be identified. Nanofibrous layers because of their permeable structure, their large superficial reach and their similarity with the local extracellular network serve as cutaneous substitution for dealing with deep and superficial injuries. By a diminished microbial load without infestation, scab formation and infiltration of defense cells in the initial phase, acute injuries are usually characterized. Here recovery is related with epithelialization, angiogenesis and relocation of fibroblasts. The wound becomes obstinate when microbial biofilms are developed while the immune system does not manage to eliminate the infection. Increased inflammatory process, lower deep tissue oxygenation, fibrin cuffs, fibroblastic senescence, altered angiogenesis, stalled re-epithelialization and chronic infection have been visualized. Conventional wound mending treatments for the most part falling flat to supply a great clinical result, either basically like wound epithelialization and regulation of fluid loss or practically like histological highlights that decide versatility, strength, affectability, etc. Conventional wound therapies commonly fail to offer a better medical output, like wound epithelialization and regulation of fluid reduction or physiologically like cellular features that determine durability, sensitivity, elasticity, etc. Nanotechnology may be a dependable investigation space for wound-healing treatments through their versatile physicochemical properties. Advancing nano platforms with novel solutions for curing chronicdiabetic wounds are discussed in detail that can guide further research in this sector.
Collapse
Affiliation(s)
- R I Jari Litany
- Department of Nanotechnology, Noorul Islam Centre for Higher Education, Kumaracoil, Tamil Nadu 629180, India
| | - P K Praseetha
- Department of Nanotechnology, Noorul Islam Centre for Higher Education, Kumaracoil, Tamil Nadu 629180, India.
| |
Collapse
|
15
|
Majd H, Harker A, Edirisinghe M, Parhizkar M. Optimised release of tetracycline hydrochloride from core-sheath fibres produced by pressurised gyration. J Drug Deliv Sci Technol 2022. [DOI: 10.1016/j.jddst.2022.103359] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
|
16
|
Cui C, Sun S, Li X, Chen S, Wu S, Zhou F, Ma J. Optimizing the chitosan-PCL based membranes with random/aligned fiber structure for controlled ciprofloxacin delivery and wound healing. Int J Biol Macromol 2022; 205:500-510. [PMID: 35218801 DOI: 10.1016/j.ijbiomac.2022.02.118] [Citation(s) in RCA: 26] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/21/2021] [Revised: 02/16/2022] [Accepted: 02/18/2022] [Indexed: 12/12/2022]
Abstract
The aim of this study was to optimize the chitosan/polycaprolactone (CS/PCL) electrospun nanofibrous membrane with random/aligned fiber structures to provide a controlled release of ciprofloxacin (Cip) and guide skin fibroblasts arrangement. A series of Cip-encapsulated CS/PCL electrospun membranes were prepared by coaxial-electrospinning. The existence of Cip in core-shell structured fibers was confirmed by using SEM, TEM and FTIR characterizations. The in vitro drug-release profiles suggested that the Cip presented a sustained release for 15 days. Simultaneously, cyto-compatibility of the membranes decreased with the increasing amount of Cip from 2.0% to 5.0%. In particular, aligned CS/PCL membrane loading with 2.0% Cip exhibited a good balanced ability between cell proliferation and antibacterial effect (>99% against Escherichiacoli and Staphylococcus aureus), which significantly accelerated the wound healing process in vivo. These results suggested that the aligned CS/PCL membrane loading with 2.0% Cip exhibited great antibacterial property and biocompatibility, which possess promising applications potential for wound healing.
Collapse
Affiliation(s)
- Congjing Cui
- College of Textiles and Clothing, Qingdao University, Qingdao 266071, Shandong, China
| | - Shibin Sun
- College of Textiles and Clothing, Qingdao University, Qingdao 266071, Shandong, China
| | - Xueyan Li
- College of Textiles and Clothing, Qingdao University, Qingdao 266071, Shandong, China
| | - Shaojuan Chen
- College of Textiles and Clothing, Qingdao University, Qingdao 266071, Shandong, China
| | - Shaohua Wu
- College of Textiles and Clothing, Qingdao University, Qingdao 266071, Shandong, China
| | - Fang Zhou
- College of Textiles and Clothing, Qingdao University, Qingdao 266071, Shandong, China.
| | - Jianwei Ma
- College of Textiles and Clothing, Qingdao University, Qingdao 266071, Shandong, China
| |
Collapse
|
17
|
Williams L, Hatton FL, Willcock H, Mele E. Electrospinning of Stimuli‐Responsive Polymers for Controlled Drug Delivery: pH‐ and Temperature‐Driven Release. Biotechnol Bioeng 2022; 119:1177-1188. [DOI: 10.1002/bit.28043] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/13/2021] [Revised: 12/21/2021] [Accepted: 01/17/2022] [Indexed: 11/08/2022]
Affiliation(s)
- L. Williams
- Department of Materials Loughborough University Epinal Way, Loughborough LE11 3TU UK
| | - F. L. Hatton
- Department of Materials Loughborough University Epinal Way, Loughborough LE11 3TU UK
| | - H. Willcock
- Department of Materials Loughborough University Epinal Way, Loughborough LE11 3TU UK
| | - E. Mele
- Department of Materials Loughborough University Epinal Way, Loughborough LE11 3TU UK
| |
Collapse
|
18
|
Hall TJ, Villapún VM, Addison O, Webber MA, Lowther M, Louth SET, Mountcastle SE, Brunet MY, Cox SC. A call for action to the biomaterial community to tackle antimicrobial resistance. Biomater Sci 2021; 8:4951-4974. [PMID: 32820747 DOI: 10.1039/d0bm01160f] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
The global surge of antimicrobial resistance (AMR) is a major concern for public health and proving to be a key challenge in modern disease treatment, requiring action plans at all levels. Microorganisms regularly and rapidly acquire resistance to antibiotic treatments and new drugs are continuously required. However, the inherent cost and risk to develop such molecules has resulted in a drying of the pipeline with very few compounds currently in development. Over the last two decades, efforts have been made to tackle the main sources of AMR. Nevertheless, these require the involvement of large governmental bodies, further increasing the complexity of the problem. As a group with a long innovation history, the biomaterials community is perfectly situated to push forward novel antimicrobial technologies to combat AMR. Although this involvement has been felt, it is necessary to ensure that the field offers a united front with special focus in areas that will facilitate the development and implementation of such systems. This paper reviews state of the art biomaterials strategies striving to limit AMR. Promising broad-spectrum antimicrobials and device modifications are showcased through two case studies for different applications, namely topical and implantables, demonstrating the potential for a highly efficacious physical and chemical approach. Finally, a critical review on barriers and limitations of these methods has been developed to provide a list of short and long-term focus areas in order to ensure the full potential of the biomaterials community is directed to helping tackle the AMR pandemic.
Collapse
Affiliation(s)
- Thomas J Hall
- School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT, UK.
| | - Victor M Villapún
- School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT, UK.
| | - Owen Addison
- Faculty of Dentistry, Oral and Craniofacial Sciences, King's College London, London, SE1 9RT, UK
| | - Mark A Webber
- Quadram Institute Bioscience, Norwich Research Park, Colney, NR4 7UQ, UK
| | - Morgan Lowther
- School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT, UK.
| | - Sophie E T Louth
- School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT, UK.
| | - Sophie E Mountcastle
- School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT, UK.
| | - Mathieu Y Brunet
- School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT, UK.
| | - Sophie C Cox
- School of Chemical Engineering, University of Birmingham, Edgbaston B15 2TT, UK.
| |
Collapse
|
19
|
Physicochemical characteristics of thermo-responsive gelatin membranes containing carboxymethyl chitosan and poly(N-isopropylacrylamide-co-acrylic acid). JOURNAL OF POLYMER RESEARCH 2021. [DOI: 10.1007/s10965-021-02534-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
20
|
Siafaka PI, Özcan Bülbül E, Dilsiz P, Karantas ID, Okur ME, Üstündağ Okur N. Detecting and targeting neurodegenerative disorders using electrospun nanofibrous matrices: current status and applications. J Drug Target 2021; 29:476-490. [PMID: 33269637 DOI: 10.1080/1061186x.2020.1859516] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Abstract
Neurodegeneration is defined as the progressive atrophy and loss of function of neurons; it is present in neurodegenerative disorders such as Multiple Sclerosis, Alzheimer's, Huntington's, and Parkinson's diseases. The detection of such disorders is performed by various imaging modalities while their therapeutic management is quite challenging. Besides, the pathogenesis of neurodegenerative disorders is still under ongoing research due to complex and multi-factorial mechanisms. Currently, targeting the specific proteins responsible for neurodegeneration is of great interest to many researchers. Furthermore, nanotechnology-based approaches for targeting the affected neurons became an emerging field of interest. Nanostructures of various forms have been developed aiming to act as therapeutics for neurodegeneration, in which electrospun nanofibers seem to play an important role as biomedical products for both detection and management of the diseases. Electrospinning is an intriguing method able to produce nanofibers with a wide range of sizes and morphological characteristics. Such nanofibrous matrices can be delivered through different administration routes to target various diseases. In this review, the most recent advancements in electrospun nanofibrous systems that target or detect multiple neurodegenerative diseases have been enlightened and an introduction to the general aspects of neurodegenerative diseases and the electrospinning process has been made. Finally, future perspectives of neurodegeneration targeting were also discussed.
Collapse
Affiliation(s)
- Panoraia I Siafaka
- School of Chemistry, Faculty of Sciences, Aristotle University of Thessaloniki, Thessaloniki, Greece
| | - Ece Özcan Bülbül
- Department of Pharmaceutical Technology, Faculty of Pharmacy, Istinye University, Istanbul, Turkey
| | - Pelin Dilsiz
- Department of Physiology, School of Medicine, Regenerative and Restorative Medical Research Center (REMER), Istanbul Medipol University, Istanbul, Turkey.,Faculty of Pharmacy, Altınbaş University, Istanbul, Turkey
| | | | - Mehmet Evren Okur
- Department of Pharmacology, Faculty of Pharmacy, University of Health Sciences, Istanbul, Turkey
| | - Neslihan Üstündağ Okur
- Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Health Sciences, Istanbul, Turkey
| |
Collapse
|
21
|
Gögele C, Schulze-Tanzil G, Kokozidou M, Gäbel C, Billner M, Reichert B, Bodenschatz K. Growth characteristics of human juvenile, adult and murine fibroblasts: a comparison of polymer wound dressings. J Wound Care 2020; 29:572-585. [PMID: 33052799 DOI: 10.12968/jowc.2020.29.10.572] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Abstract
OBJECTIVE Fibroblasts are important for the successful healing of deep wounds. However, the influence exerted by Cuticell, a natural polymer on fibroblasts and by the synthetic polymer, Suprathel, made of poly-L-lactic acid, is not sufficiently characterised. This study compared the survival and growth characteristics of human juvenile and adult dermal fibroblasts as well as murine fibroblast cell line L929, on a natural polymer with those of a synthetic polymer using different culture models. METHOD Murine, juvenile and adult human fibroblasts were seeded on both the natural and synthetic polymers using statical slide culture or the medium air interface and dynamical rotatory culture. Cell adherence, viability, morphology and actin cytoskeleton architecture were monitored for 1-7 days. Biomaterial permeability was checked with a previously established diffusion chamber. RESULTS The majority of the murine and adult human fibroblasts survived in slide and rotatory cultures on both wound dressings. The fibroblasts seeded on the synthetic polymer exhibited phenotypically a typical spread shape with multiple cell adhesion sites earlier than those on the natural polymer. The highest survival rates in all tested fibroblast species over the entire observation time were detected in rotatory culture (mean: >70%). Nevertheless, it led to cell-cluster formation on both materials. In the medium air interface culture, few adult fibroblasts adhered and survived until the seventh day of culture on both the natural and synthetic polymers, and no viable juvenile and L929 fibroblasts could be found by day seven. Apart from a significant higher survival rate of L929 in slide culture on the natural polymer compared with the synthetic polymer at the end of the culturing period (p<0.0001), and a higher cell survival of L929 on the natural polymer in medium air interface culture, only minor differences between both materials were evident. This suggested a comparable cytocompatibility of both materials. Permeability testing revealed slightly higher permeance of the natural polymer compared with the synthetic polymer. CONCLUSION Cell survival rates depended on the culture system and the fibroblast source. Nevertheless, the juvenile skin fibroblasts were the most sensitive. This observation suggests that wound dressings used in treating children should be tested beforehand with juvenile fibroblasts to ensure the dressing does not compromise wound healing. Future experiments should also include the response of compromised fibroblasts, for example, from burn patients.
Collapse
Affiliation(s)
- Clemens Gögele
- Institute of Anatomy and Cell Biology, Paracelsus Medical University, Salzburg and Nuremberg, Department Nuremberg, Prof.-Ernst Nathan Strasse 1, 90419 Nuremberg, Germany.,Department of Biosciences, Paris Lodron University of Salzburg, Hellbrunnerstr. 34, 5020 Salzburg, Austria
| | - Gundula Schulze-Tanzil
- Institute of Anatomy and Cell Biology, Paracelsus Medical University, Salzburg and Nuremberg, Department Nuremberg, Prof.-Ernst Nathan Strasse 1, 90419 Nuremberg, Germany
| | - Maria Kokozidou
- Institute of Anatomy and Cell Biology, Paracelsus Medical University, Salzburg and Nuremberg, Department Nuremberg, Prof.-Ernst Nathan Strasse 1, 90419 Nuremberg, Germany
| | - Christiane Gäbel
- Leibniz-Institute for Polymer Research, Institute of Polymer Materials, Dresden, Hohe Straße 6, 01069 Dresden, Germany
| | - Moritz Billner
- Department of Plastic, Reconstructive and Hand Surgery, Center of Severe Burn Injuries Nuremberg General Hospital / Paracelsus Medical University Salzburg and Nuremberg, Department Nuremberg, Breslauer Straße 20, 90471 Nuremberg, Germany
| | - Bert Reichert
- Department of Plastic, Reconstructive and Hand Surgery, Center of Severe Burn Injuries Nuremberg General Hospital / Paracelsus Medical University Salzburg and Nuremberg, Department Nuremberg, Breslauer Straße 20, 90471 Nuremberg, Germany
| | - Karl Bodenschatz
- Department of Pediatric Surgery and Urology, Nuremberg General Hospital/Paracelsus Medical University Salzburg, Department Nuremberg, Breslauer Straße 201, 90471 Nuremberg, Germany
| |
Collapse
|
22
|
Bi H, Feng T, Li B, Han Y. In Vitro and In Vivo Comparison Study of Electrospun PLA and PLA/PVA/SA Fiber Membranes for Wound Healing. Polymers (Basel) 2020; 12:E839. [PMID: 32268612 PMCID: PMC7240532 DOI: 10.3390/polym12040839] [Citation(s) in RCA: 40] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/26/2020] [Revised: 03/23/2020] [Accepted: 03/31/2020] [Indexed: 11/17/2022] Open
Abstract
Wound dressings can accelerate wound healing. The degradable polymer poly(lactic acid) (PLA) shows good mechanical properties and biocompatibility. Sodium alginate (SA) holds good biocompatibility, hemostasis, and high hygroscopicity. Poly(vinyl alcohol) (PVA) has good spinnability as a pharmaceutical excipient. Herein, we carried out a comparison study of electrospun PLA and PLA/PVA/SA fiber membranes for wound healing in vitro and in vivo. In this study, PLA and PLA/PVA/SA nanofiber membranes were fabricated through electrospinning to produce a highly porous and large specific surface area that could promote wound healing. In vitro experiments showed that PLA and PLA/PVA/SA nanofiber membranes could all provide good support for the growth of rat fibroblasts (L929). Moreover, rat fibroblasts displayed slightly better adhesion and proliferation on PLA/PVA/SA than on the PLA fiber membranes. The in vivo potentiality of the PLA and PLA/PVA/SA fiber membranes was assessed in rat models of skin defects in which the PLA and PLA/PVA/SA fiber membranes significantly improved wound healing compared to commercially available gauzes. No significant differences in wound healing were observed between PLA and PLA/PVA/SA fiber membranes in our study. Furthermore, Masson staining and PCR displayed the PLA fiber membrane promoted protein deposition compared to the PLA/PVA/SA fiber membrane. In addition, IHC suggested that PLA/PVA/SA dressing reduced the inflammatory response during early wound healing compared to the PLA fiber membrane. These findings highlight the utility of fiber membranes as novel wound-healing dressings.
Collapse
Affiliation(s)
| | | | - Binbin Li
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Biomedical Materials and Engineering Research Center of Hubei Province, Wuhan University of Technology, Wuhan 430070, China; (H.B.); (T.F.)
| | - Yingchao Han
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Biomedical Materials and Engineering Research Center of Hubei Province, Wuhan University of Technology, Wuhan 430070, China; (H.B.); (T.F.)
| |
Collapse
|
23
|
da Silva BATT, Pascoalino LA, de Souza RL, Muniz EC, Curti PS. Characterization of novel thermoresponsive poly(butylene adipate-co-terephthalate)/poly(N-isopropylacrylamide) electrospun fibers. Polym Bull (Berl) 2020. [DOI: 10.1007/s00289-019-02783-2] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
|
24
|
Li J, Zhu J, Jia L, Ma Y, Wu H. Aqueous-based electrospun P(NIPAAm- co-AAc)/RSF medicated fibrous mats for dual temperature- and pH-responsive drug controlled release. RSC Adv 2019; 10:323-331. [PMID: 35492552 PMCID: PMC9047333 DOI: 10.1039/c9ra08832f] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/28/2019] [Accepted: 12/17/2019] [Indexed: 12/27/2022] Open
Abstract
This paper presents a green method for fabricating dual temperature- and pH-responsive electrospun fibrous mats from an aqueous-based blend poly(N-isopropylacrylamide-co-acrylic acid) (P(NIPAAm-co-AAc)) and regenerated silk fibroin (RSF) by employing electrospinning technique. P(NIPAAm-co-AAc) was synthesized by free radical solution polymerization and its low critical solution temperature (LCST) was in the physiological range (38.8 °C). The P(NIPAAm-co-AAc)/RSF fibers were prepared by electrospinning technology in the presence of the crosslinking agents (EDC·HCl and NHS) with water as solvent. After in situ crosslinking and water-annealing process, the water-stable composite fibrous mats were obtained. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were used to analyze the crosslinking process. Temperature and pH dual stimuli-responsive swelling-shrinking behavior of the fibrous mats were observed when the temperature was below and above the LCST of the copolymer at different pHs. In addition, rhodamine B-loaded the fibrous mats also showed dual temperature and pH controlled release behavior, demonstrating the potential use of the fibrous mats for "smart" controlled drug delivery applications.
Collapse
Affiliation(s)
- Juan Li
- College of Materials Science and Engineering, Taiyuan University of Technology Taiyuan 030024 China
| | - Jingxin Zhu
- College of Materials Science and Engineering, Taiyuan University of Technology Taiyuan 030024 China
| | - Lan Jia
- College of Materials Science and Engineering, Taiyuan University of Technology Taiyuan 030024 China
| | - Yanlong Ma
- College of Materials Science and Engineering, Taiyuan University of Technology Taiyuan 030024 China
| | - Haijuan Wu
- College of Materials Science and Engineering, Taiyuan University of Technology Taiyuan 030024 China
| |
Collapse
|
25
|
Electrospun polymer micro/nanofibers as pharmaceutical repositories for healthcare. J Control Release 2019; 302:19-41. [DOI: 10.1016/j.jconrel.2019.03.020] [Citation(s) in RCA: 180] [Impact Index Per Article: 36.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/31/2019] [Revised: 03/22/2019] [Accepted: 03/23/2019] [Indexed: 12/19/2022]
|
26
|
Rezvani Ghomi E, Khalili S, Nouri Khorasani S, Esmaeely Neisiany R, Ramakrishna S. Wound dressings: Current advances and future directions. J Appl Polym Sci 2019. [DOI: 10.1002/app.47738] [Citation(s) in RCA: 226] [Impact Index Per Article: 45.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Affiliation(s)
- Erfan Rezvani Ghomi
- Department of Chemical EngineeringIsfahan University of Technology Isfahan 8415683111 Iran
| | - Shahla Khalili
- Department of Chemical EngineeringIsfahan University of Technology Isfahan 8415683111 Iran
| | - Saied Nouri Khorasani
- Department of Chemical EngineeringIsfahan University of Technology Isfahan 8415683111 Iran
| | - Rasoul Esmaeely Neisiany
- Department of Chemical EngineeringIsfahan University of Technology Isfahan 8415683111 Iran
- Division of Materials ScienceLuleå University of Technology Luleå SE‐97187 Sweden
- Center for Nanofibers and Nanotechnology, Department of Mechanical EngineeringFaculty of Engineering Singapore 117576 Singapore
| | - Seeram Ramakrishna
- Center for Nanofibers and Nanotechnology, Department of Mechanical EngineeringFaculty of Engineering Singapore 117576 Singapore
| |
Collapse
|
27
|
Preparation and controlled drug release ability of the poly[N-isopropylacryamide-co-allyl poly(ethylene glycol)]-b-poly(γ-benzyl-l-glutamate) polymeric micelles. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2019; 98:910-917. [PMID: 30813098 DOI: 10.1016/j.msec.2019.01.056] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/19/2018] [Revised: 11/29/2018] [Accepted: 01/12/2019] [Indexed: 02/06/2023]
Abstract
The polymeric micelles were prepared through a copolymerization of allyl polyethylene glycol (APEG) and N-isopropylacrylamide in the presence of 2-aminoethanethiol (AET), followed by a ring opening polymerization of γ-benzyl-l-glutamate N-carboxyanhydride (BLG-NCA). Doxorubicin (DOX) as a model drug was covalently conjugated into the core of micelles via hydrazone bonds. The drug loading capacity could reach up to 15% with drug encapsulation efficiency of 80%. The pH/thermo sensitivities were observed in the process of in vitro drug release. The DOX-loaded micelles exhibited accelerated drug release behaviors in an acidic condition, and enhanced therapeutic efficacy was observed. Furthermore, the cytotoxicity of micelles against Hela and 3T3 cells was evaluated before and after drug loading. The DOX-loaded micelles showed strong cytotoxic activity to the cancer cells. But the blank micelles showed non-cytotoxicity. Therefore, the thermo/pH dual-responsive polymeric micelles have a promising future applied as a controlled drug delivery system for anticancer drugs.
Collapse
|
28
|
Xia L, Lu L, Liang Y, Cheng B. Fabrication of centrifugally spun prepared poly(lactic acid)/gelatin/ciprofloxacin nanofibers for antimicrobial wound dressing. RSC Adv 2019; 9:35328-35335. [PMID: 35528085 PMCID: PMC9074732 DOI: 10.1039/c9ra07826f] [Citation(s) in RCA: 22] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/26/2019] [Accepted: 10/21/2019] [Indexed: 01/24/2023] Open
Abstract
Centrifugal spinning is a novel technology for producing ultrafine fibers in high yield with diameters ranging from micro to nanometers. The obtained fibers have potential applications in the field of tissue engineering, wound dressing, and biomedicine etc. In this paper, a system of poly(lactic acid)/gelatin (PLA/GE) nanofibers loaded with ciprofloxacin (CPF) drug for wound dressings were successfully prepared by centrifugal spinning. The nanofibers were characterized by scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), thermal gravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). In addition, the nanofibers' properties in terms of hydrophilicity, antibacterial properties and in vitro drug release were further investigated. The results showed that the CPF drug was successfully loaded and in an amorphous state in the PLA/GE nanofibers, the surface of the nanofibers was smooth and the nanofibers' diameter became large after the drug was loaded. The thermal stability of the nanofiber was reduced while the hydrophilicity was improved. Antibacterial and in vitro drug release experiments showed that the nanofibers have obvious antibacterial properties and have the positive effect of sustained release of the drug. Drug-loaded PLA/GE nanofibers could be good candidates for wound dressing. Centrifugal spinning is a novel technology for producing ultrafine fibers in high yield with diameters ranging from micro to nanometers.![]()
Collapse
Affiliation(s)
- Lei Xia
- School of Textile Science and Engineering
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membranes
- Tianjin Polytechnic University
- Tianjin 300387
- China
| | - Linlin Lu
- School of Textile Science and Engineering
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membranes
- Tianjin Polytechnic University
- Tianjin 300387
- China
| | - Yuxia Liang
- School of Mathematical Science
- Tianjin Normal University
- Tianjin 300387
- China
| | - Bowen Cheng
- School of Textile Science and Engineering
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membranes
- Tianjin Polytechnic University
- Tianjin 300387
- China
| |
Collapse
|
29
|
Luo P, Liu L, Xu W, Fan L, Nie M. Preparation and characterization of aminated hyaluronic acid/oxidized hydroxyethyl cellulose hydrogel. Carbohydr Polym 2018; 199:170-177. [DOI: 10.1016/j.carbpol.2018.06.065] [Citation(s) in RCA: 37] [Impact Index Per Article: 6.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2018] [Revised: 04/12/2018] [Accepted: 06/14/2018] [Indexed: 12/15/2022]
|
30
|
Biocompatible electrospun nanofibers containing cloxacillin: Antibacterial activity and effect of pH on the release profile. REACT FUNCT POLYM 2018. [DOI: 10.1016/j.reactfunctpolym.2018.09.001] [Citation(s) in RCA: 25] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
|
31
|
Negut I, Grumezescu V, Grumezescu AM. Treatment Strategies for Infected Wounds. Molecules 2018; 23:E2392. [PMID: 30231567 PMCID: PMC6225154 DOI: 10.3390/molecules23092392] [Citation(s) in RCA: 313] [Impact Index Per Article: 52.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/24/2018] [Revised: 09/12/2018] [Accepted: 09/14/2018] [Indexed: 12/22/2022] Open
Abstract
The treatment of skin wounds is a key research domain owing to the important functional and aesthetic role of this tissue. When the skin is impaired, bacteria can soon infiltrate into underlying tissues which can lead to life-threatening infections. Consequently, effective treatments are necessary to deal with such pathological conditions. Recently, wound dressings loaded with antimicrobial agents have emerged as viable options to reduce wound bacterial colonization and infection, in order to improve the healing process. In this paper, we present an overview of the most prominent antibiotic-embedded wound dressings, as well as the limitations of their use. A promising, but still an underrated group of potential antibacterial agents that can be integrated into wound dressings are natural products, especially essential oils. Some of the most commonly used essential oils against multidrug-resistant microorganisms, such as tea tree, St. John's Wort, lavender and oregano, together with their incorporation into wound dressings are presented. In addition, another natural product that exhibits encouraging antibacterial activity is honey. We highlight recent results of several studies carried out by researchers from different regions of the world on wound dressings impregnated with honey, with a special emphasis on Manuka honey. Finally, we highlight recent advances in using nanoparticles as platforms to increase the effect of pharmaceutical formulations aimed at wound healing. Silver, gold, and zinc nanoparticles alone or functionalized with diverse antimicrobial compounds have been integrated into wound dressings and demonstrated therapeutic effects on wounds.
Collapse
Affiliation(s)
- Irina Negut
- National Institute for Lasers, Plasma and Radiation Physics, Magurele RO-77125, Romania.
- Faculty of Physics, University of Bucharest, Magurele 077125, Romania.
| | - Valentina Grumezescu
- National Institute for Lasers, Plasma and Radiation Physics, Magurele RO-77125, Romania.
- Faculty of Applied Chemistry and Materials Science, Politehnica University of Bucharest, Bucharest 011061, Romania.
| | - Alexandru Mihai Grumezescu
- Faculty of Applied Chemistry and Materials Science, Politehnica University of Bucharest, Bucharest 011061, Romania.
- Research Institute of University of Bucharest, ICUB, Bucharest 050107, Romania.
| |
Collapse
|
32
|
Burgess K, Li H, Abo-Zeid Y, Williams GR. The Effect of Molecular Properties on Active Ingredient Release from Electrospun Eudragit Fibers. Pharmaceutics 2018; 10:pharmaceutics10030103. [PMID: 30042323 PMCID: PMC6161026 DOI: 10.3390/pharmaceutics10030103] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2018] [Revised: 05/11/2018] [Accepted: 05/16/2018] [Indexed: 12/02/2022] Open
Abstract
The formation of nanoscale fibers from pH-sensitive polymers is a route which has been widely explored for targeted drug delivery. In particular, the Eudragit L100 and S100 families of polymers have received significant attention for this purpose. However, while in some cases it is shown that making drug-loaded Eudragit polymers effectively prevents drug release in low-pH media where the polymer is insoluble, this is not always the case, and other studies have reported significant amounts of drug release at acidic pHs. In this study, we sought to gain insight into the factors influencing the release of active ingredients from Eudragit S100 (ES100) fibers. A family of materials was prepared loaded with the model active ingredients (AIs) benzoic acid, 1-naphthoic acid, 1-naphthylamine, and 9-anthracene carboxylic acid. Analogous systems were prepared with an AI-loaded core and an ES100 sheath. The resultant fibers were smooth and cylindrical in the majority of cases, and X-ray diffraction and differential scanning calorimetry showed them to comprise amorphous solid dispersions. When AI release from the monolithic fibers was probed, it was found that there was significant release at pH 1 in all cases except with 9-anthracene carboxylic acid. Analysis of the results indicated that both the molecular weight of the AI and its acidity/basicity are important in controlling release, with lower molecular weight AIs and basic species released more quickly. The same release trends are seen with the core/shell fibers, but AI release at pH 1 is attenuated. The most significant change between the monolithic and core/shell systems was observed in the case of 1-naphthylamine. Mathematical equations were devised to connect molecular properties and AI release under acidic conditions.
Collapse
Affiliation(s)
- Kieran Burgess
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, UK.
| | - Heyu Li
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, UK.
| | - Yasmin Abo-Zeid
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, UK.
| | - Gareth R Williams
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, UK.
| |
Collapse
|
33
|
Zagho MM, Hussein EA, Elzatahry AA. Recent Overviews in Functional Polymer Composites for Biomedical Applications. Polymers (Basel) 2018; 10:E739. [PMID: 30960664 PMCID: PMC6403933 DOI: 10.3390/polym10070739] [Citation(s) in RCA: 60] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/30/2018] [Revised: 06/30/2018] [Accepted: 07/01/2018] [Indexed: 12/21/2022] Open
Abstract
Composite materials are considered as an essential part of our daily life due to their outstanding properties and diverse applications. Polymer composites are a widespread class of composites, characterized by low cost, facile processing methods, and varied applications ranging from daily-use issues to highly complicated electronics and advanced medical combinations. In this review, we focus on the most important fabrication techniques for bioapplied polymer composites such as electrospinning, melt-extrusion, solution mixing, and latex technology, as well as in situ methods. Additionally, significant and recent advances in biomedical applications are spotlighted, such as tissue engineering (including bone, blood vessels, oral tissues, and skin), dental resin-based composites, and wound dressing.
Collapse
Affiliation(s)
- Moustafa M Zagho
- Materials Science and Technology Program, College of Arts and Sciences, Qatar University, Doha P.O. Box 2713, Qatar.
| | - Essraa A Hussein
- Materials Science and Technology Program, College of Arts and Sciences, Qatar University, Doha P.O. Box 2713, Qatar.
| | - Ahmed A Elzatahry
- Materials Science and Technology Program, College of Arts and Sciences, Qatar University, Doha P.O. Box 2713, Qatar.
| |
Collapse
|
34
|
Luo P, Nie M, Wen H, Xu W, Fan L, Cao Q. Preparation and characterization of carboxymethyl chitosan sulfate/oxidized konjac glucomannan hydrogels. Int J Biol Macromol 2018; 113:1024-1031. [DOI: 10.1016/j.ijbiomac.2018.01.101] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/11/2017] [Revised: 01/06/2018] [Accepted: 01/15/2018] [Indexed: 12/25/2022]
|
35
|
Simões D, Miguel SP, Ribeiro MP, Coutinho P, Mendonça AG, Correia IJ. Recent advances on antimicrobial wound dressing: A review. Eur J Pharm Biopharm 2018; 127:130-141. [DOI: 10.1016/j.ejpb.2018.02.022] [Citation(s) in RCA: 492] [Impact Index Per Article: 82.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/22/2017] [Revised: 02/07/2018] [Accepted: 02/16/2018] [Indexed: 12/15/2022]
|
36
|
Li H, Sang Q, Wu J, Williams GR, Wang H, Niu S, Wu J, Zhu LM. Dual-responsive drug delivery systems prepared by blend electrospinning. Int J Pharm 2018. [PMID: 29526623 DOI: 10.1016/j.ijpharm.2018.03.009] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022]
Abstract
To prepare temperature and pH dual-responsive drug delivery systems, the thermosensitive polymer poly(N-isopropylacrylamide) (PNIPAAm) was first synthesized by free-radical polymerization. It was then co-dissolved with the pH-sensitive polymer Eudragit® L100-55 (EL100-55) and processed into fibers using electrospinning. Ketoprofen (KET), a model drug, was also incorporated into the composite fibers, and fibers based on a single polymer additionally prepared. The fibers had smooth cylindrical morphologies, and no obvious phase separation could be seen. Using X-ray diffraction, KET was determined to be present in the amorphous state in the fiber matrix. FTIR spectroscopy also indicated the successful incorporation of amorphous KET in the fibers. In vitro drug release studies in media at different pH (4.5 or 7.4) or temperature (25 and 37 °C) showed that the release of KET from the blend PNIPAAm/EL100-55 fibers was dependent both on environmental temperature and pH, reflecting the dual-responsive properties of the fibers. The MTT assay was used to explore the biocompatibility of the PNIPAAm/EL100-55 composite fibers towards L929 fibroblasts. Viability was always found to be >80%, even at polymer concentrations of 100 mg/L. Therefore, the fibers prepared here could lead to the development of multi-responsive materials for drug delivery and tissue engineering.
Collapse
Affiliation(s)
- Heyu Li
- College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620, China
| | - Qingqing Sang
- College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620, China
| | - Junzi Wu
- College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620, China
| | - Gareth R Williams
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, UK.
| | - Haijun Wang
- College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620, China
| | - Shiwei Niu
- College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620, China
| | - Jianrong Wu
- College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620, China
| | - Li-Min Zhu
- College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620, China.
| |
Collapse
|
37
|
Electrospun Antimicrobial Wound Dressings: Novel Strategies to Fight Against Wound Infections. CHRONIC WOUNDS, WOUND DRESSINGS AND WOUND HEALING 2018. [DOI: 10.1007/15695_2018_133] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
|