Electrophoretic deposition of hydroxyapatite-hexagonal boron nitride composite coatings on Ti substrate

2D Monolayer Catalysts: Towards Efficient Water Splitting and Green Hydrogen Production

A viable alternative to non-renewable hydrocarbon fuels is hydrogen gas, created using a safe, environmentally friendly process like water splitting. An important role in water-splitting applications is played by the development of two-dimensional (2D) layered transition metal chalcogenides (TMDCs), transition metal carbides (MXenes), graphene-derived 2D layered nanomaterials, phosphorene, and hexagonal boron nitride. Advanced synthesis methods and characterization instruments enabled an effective application for improved electrocatalytic water splitting and sustainable hydrogen production. Enhancing active sites, modifying the phase and electronic structure, adding conductive elements like transition metals, forming heterostructures, altering the defect state, etc., can improve the catalytic activity of 2D stacked hybrid monolayer nanomaterials. The majority of global research and development is focused on finding safer substitutes for petrochemical fuels, and this review summarizes recent advancements in the field of 2D monolayer nanomaterials in water splitting for industrial-scale green hydrogen production and fuel cell applications.

Electrophoretically deposited titanium and its alloys in biomedical engineering: Recent progress and remaining challenges

Over the past decade, titanium implants have gained popularity as the number of performed implantation operations has significantly increased. There are a number of methods for modifying the surface of biomaterials, which are aimed at extending the life of titanium implants. The developments in this field in recent years have required a comprehensive discussion of all the properties of electrophoretically deposited coatings on titanium and its alloys, taking into account their bioactivity. The development that took place in this field in recent years required a comprehensive discussion of all the properties of coatings electrophoretically deposited on titanium and its alloys, with particular emphasis on their bioactivity. Herein, we attempt to assess the influence of the electrophoretic deposition (EPD) process parameters on these coatings' biological and mechanical properties. Particular attention has been addressed to the in-vitro and in-vivo studies conducted hitherto. We have seen an increased interest in using titanium alloys without the addition of toxic compounds and gaps in the EPD field such as the uncommon endeavors to develop a "Design of experiments" approach as well as the lack of assessment of the surface free energy and detailed topography of electrophoretically deposited coatings. The exact correlation of coating properties with EPD process parameters still seems explicitly not understood, necessitating more future investigations. Ipso facto, the exact mechanism of particle agglomeration and Hamaker's law need to be fathomable.

The Bio-Aging of Biofilms on Behalf of Various Oral Status on Different Titanium Implant Materials

The properties of titanium implants are affected by bio-aging due to long-term exposure to the oral microenvironment. This study aimed to investigate probable changes in titanium plates after different biofilm bio-aging processes, representing various oral status. Titanium plates with different surface treatments were used, including polish, sandblasted with large grit and acid etched (SLA), microarc oxidation (MAO), and hydroxyapatite coating (HA). We established dual-species biofilms of Staphylococcus aureus (S. aureus)-Candida albicans (C. albicans) and saliva biofilms from the healthy and patients with stage III-IV periodontitis, respectively. After bio-aging with these biofilms for 30 days, the surface morphology, chemical composition, and water contact angles were measured. The adhesion of human gingival epithelial cells, human gingival fibroblasts, and three-species biofilms (Streptococcus sanguis, Porphyromonas gingivalis, and Fusobacterium nucleatum) were evaluated. The polished specimens showed no significant changes after bio-aging with these biofilms. The MAO- and SLA-treated samples showed mild corrosion after bio-aging with the salivary biofilms. The HA-coated specimens were the most vulnerable. Salivary biofilms, especially saliva from patients with periodontitis, exhibited a more distinct erosion on the HA-coating than the S. aureus-C. albicans dual-biofilms. The coating became thinner and even fell from the substrate. The surface became more hydrophilic and more prone to the adhesion of bacteria. The S. aureus-C. albicans dual-biofilms had a comparatively mild corrosion effect on these samples. The HA-coated samples showed more severe erosion after bio-aging with the salivary biofilms from patients with periodontitis compared to those of the healthy, which emphasized the importance of oral hygiene and periodontal health to implants in the long run.

Boron-incorporated biocomposite coatings on 316L and NiTi alloys: Enhanced structural, antibacterial activity, and cell viability performances

Boron doped (5 %, 10%, and 15 wt.%) Hydroxyapatite (B-HA) biocomposites were syntesized and coated on 316L SS and NiTi (Ni-45Ti) metallic substrates by using the electrophoretic deposition process (EPD). The morphological and structural characterization of the coatings was executed using scanning electron microscopy (SEM) and X-ray diffraction devices (XRD). Antibacterial tests were conducted using Escherichia coli ( E. coli, JM103) and Staphylococcus aureus ( S. aureus, ATCC29293) microorganisms. The mitochondrial activity assay (MTT)-[3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] was used to examine cell viability and cytotoxicity in Saos-2 osteoblast cells. HA and boron peaks, as well as B-TCP and metallic components, were detected in XRD examinations. Porous morphologies were generated on the surface with boron doped B-HA coatings, as revealed by SEM views. Antibacterial activity studies revealed that both metallic coating groups, notably with boron doping, demonstrated antibacterial activity against gram-negative E. coli and gram-positive S. aureus. The antibacterial activity of the 316L group was shown to be better than that of the NiTi group in comparisonal testing. The syntesized boron-doped biocomposite coatings did not have any detrimental effects on living cells, according to cell viability studies. The cell viability rate was found to be greater in NiTi coatings than in 316 SS coatings, and the impact was amplified by the addition of boron.

Boron Nano-hydroxyapatite Composite Increases the Bone Regeneration of Ovariectomized Rabbit Femurs

Osteoporosis is a systemic metabolic disease defined by a decreased bone mineral density, microarchitectural deterioration, and an increased incidence of fragility fractures that may lead to morbidity and mortality. Boron may stimulate new bone formation and regeneration, when combined with nano-hydroxyapatite. We questioned whether injecting boron-containing nano-hydroxyapatite composites with hyaluronan increased the bone mineral density and new bone formation in osteoporotic rabbit femurs. The regenerative effects of injectable boron-containing nano-hydroxyapatite composites from 6 to 12 weeks, which may prevent osteoporotic femoral fractures, were assessed. Boron-containing (10 μg/ml) nano-hydroxyapatite composites were injected into the intramedullary femoral cavity with hyaluronan. These significantly increased the histomorphometric new bone surface to the total bone surface ratio at 6 and 9 weeks. The micro-tomographic bone volume to the total volume ratio and bone mineral density in osteoporotic rabbit femurs increased when compared to the hyaluronan (p = 0.004, p = 0.004, p = 0.004, p = 0.01, respectively) and the sham-control (p = 0.01, p = 0.004, p = 0.01, p = 0.037, respectively) groups. The boron-containing group had a higher bone mineralization and new bone formation compared to the nano-hydroxyapatite group, although the difference was not statistically significant. These findings reveal that intramedullary injection of boron-containing nano-hydroxyapatite with hyaluronan increases new bone formation and mineralization in ovariectomized rabbit femurs. Boron-containing nano-hydroxyapatite composites are promising tissue engineering biomaterials that may have regenerative potential in preventing primary and/or secondary femoral fractures in osteoporosis patients.

Recent Developments in Coatings for Orthopedic Metallic Implants

Titanium, stainless steel, and CoCrMo alloys are the most widely used biomaterials for orthopedic applications. The most common causes of orthopedic implant failure after implantation are infections, inflammatory response, least corrosion resistance, mismatch in elastic modulus, stress shielding, and excessive wear. To address the problems associated with implant materials, different modifications related to design, materials, and surface have been developed. Among the different methods, coating is an effective method to improve the performance of implant materials. In this article, a comprehensive review of recent studies has been carried out to summarize the impact of coating materials on metallic implants. The antibacterial characteristics, biodegradability, biocompatibility, corrosion behavior, and mechanical properties for performance evaluation are briefly summarized. Different effective coating techniques, coating materials, and additives have been summarized. The results are useful to produce the coating with optimized properties.

Study on the Preparation of High-Temperature Resistant and Electrically Insulating h-BN Coating in Ethanol Solution by Electrophoretic Deposition

A hexagonal boron nitride (h-BN) coating of micron thickness is deposited directly on 316L stainless steel (SS316L) cathode through efficient, adjustable electrophoretic deposition (EPD) in a suspension system containing surfactant and ethanol. It is based on the mixing of h-BN with polyethyleneimine (PEI) resulting in positively charged ceramic powder making cathodic electrophoretic deposition possible. The thickness of the resulting h-BN coatings deposited on SS316L could be controlled by varying the time and the voltage of electrophoretic deposition. The deposition kinetics and mechanism have been discussed. After soaking in Al(H2PO4)3 solution and high-temperature annealing, the h-BN coatings exhibited good adhesive strength. Furthermore, a novel method has been used for the evaluation of the adhesive strength to explore the appropriate experimental conditions. X-ray diffraction spectroscopy (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were employed to characterize the h-BN coatings. The h-BN coatings are applied for the DC breakdown performance test and exhibit remarkable breakdown voltage and breakdown strength.

A review on hydroxyapatite coatings for the biomedical applications: experimental and theoretical perspectives

The production of hydroxyapatite (HAP) composite coatings has continuously been investigated for bone tissue applications during the last few decades due to their significant bioactivity and osteoconductivity.

Electrodeposited Biocoatings, Their Properties and Fabrication Technologies: A Review

Coatings deposited under an electric field are applied for the surface modification of biomaterials. This review is aimed to characterize the state-of-art in this area with an emphasis on the advantages and disadvantages of used methods, process determinants, and properties of coatings. Over 170 articles, published mainly during the last ten years, were chosen, and reviewed as the most representative. The most recent developments of metallic, ceramic, polymer, and composite electrodeposited coatings are described focusing on their microstructure and properties. The direct cathodic electrodeposition, pulse cathodic deposition, electrophoretic deposition, plasma electrochemical oxidation in electrolytes rich in phosphates and calcium ions, electro-spark, and electro-discharge methods are characterized. The effects of electrolyte composition, potential and current, pH, and temperature are discussed. The review demonstrates that the most popular are direct and pulse cathodic electrodeposition and electrophoretic deposition. The research is mainly aimed to introduce new coatings rather than to investigate the effects of process parameters on the properties of deposits. So far tests aim to enhance bioactivity, mechanical strength and adhesion, antibacterial efficiency, and to a lesser extent the corrosion resistance.

Development of Stable Boron Nitride Nanotube and Hexagonal Boron Nitride Dispersions for Electrophoretic Deposition

Boron nitride nanotubes (BNNTs) represent a relatively new class of materials that provides alternative electrical and thermal properties to the carbon analogue. The high chemical and thermal stability and large band gap combined with high electrical resistance make BNNTs desirable in several thin-film applications. In this study, stable BNNT and hexagonal boron nitride (hBN) particle dispersions have been developed using environmentally friendly advanced oxidation processing (AOP) that can be further modified for electrophoretic deposition (EPD) to produce thin films. The characterization of the dispersions has revealed how the hydroxyl radicals produced in AOP react with BNNT/hBN and contaminant boron nanoparticles (BNPs). While the radicals remove the carbon contaminant present on BNNT/hBN and increase dispersion stability, they also oxidize the BNPs and the boron oxide produced, which, conversely, reduces the dispersion stability. The use of high- or low-powered ultrasonication in combination with the AOP affects the rate of the competing reactions, with low-powered sonication and AOP providing the best combination for producing stable dispersions with high concentrations. BNNT/hBN dispersions were functionalized with polyethyleneimine to facilitate EPD, where films of several micrometer thickness were readily deposited onto stainless steel and glass-fiber fabrics. BNNT/hBN films produced on glass fabrics by EPD exhibited a consistent through-thickness macroporosity that was facilitated by platelet and nanotube stacking. The film macroporosity present on the coated fabrics was suitable for use as separator layers in supercapacitors and provided improved device robustness with a minimal impact on electrochemical performance.

The Effect of Boron-Containing Nano-Hydroxyapatite on Bone Cells

Metabolic diseases or injuries damage bone structure and self-renewal capacity. Trace elements and hydroxyapatite crystals are important in the development of biomaterials to support the renewal of bone extracellular matrix. In this study, it was assumed that the boron-loaded nanometer-sized hydroxyapatite composite supports the construction of extracellular matrix by controlled boron release in order to prevent its toxic effect. In this context, boron release from nanometer-sized hydroxyapatite was calculated by ICP-MS as in large proportion within 1 h and continuing release was provided at a constant low dose. The effect of the boron-containing nanometer-sized hydroxyapatite composite on the proliferation of SaOS-2 osteoblasts and human bone marrow-derived mesenchymal stem cells was evaluated by WST-1 and compared with the effects of nano-hydroxyapatite and boric acid. Boron increased proliferation of mesenchymal stem cells at high doses and exhibited different effects on osteoblastic cell proliferation. Boron-containing nano-hydroxyapatite composites increased osteogenic differentiation of mesenchymal stem cells by increasing alkaline phosphatase activity, when compared to nano-hydroxyapatite composite and boric acid. The molecular mechanism of effective dose of boron-containing hydroxyapatite has been assessed by transcriptomic analysis and shown to affect genes involved in Wnt, TGF-β, and response to stress signaling pathways when compared to nano-hydroxyapatite composite and boric acid. Finally, a safe osteoconductive dose range of boron-containing nano-hydroxyapatite composites for local repair of bone injuries and the molecular effect profile in the effective dose should be determined by further studies to validation of the regenerative therapeutic effect window.

Biomineralization of 2304 duplex stainless steel with surface modification by electrophoretic deposition

A hydroxyapatite (HAp) coating on 2304 duplex stainless steel (DSS) through an electrophoretic deposition process has been investigated in this work. The deposition voltage was 30 V with a time of 2 min. Field emission scanning electron microscopy and energy dispersive X-ray spectroscopy analyses were used for the microstructural and chemical examination of coatings, respectively. The Ca to P ratio for the nano HAp coating on 2304 DSS has been determined as equal to 1.642. It was observed from X-ray diffraction patterns that HAp nanoparticles were successfully combined into the substrate. The corrosion behavior of all samples was tested in simulated body fluid using a potentiodynamic polarization study. A homogeneous structure with a thin crack-free layer was obtained. Moreover, the porosity of this coating was very low leading to a high corrosion resistance, thus promoting good biocompatibility.

Influence of bio-aging on corrosion behavior of different implant materials

BACKGROUND

Dental implants and abutments are exposed to challenging oral environment. Corrosion of these materials can affect the overall performance of titanium implants.

PURPOSE

To investigate the effects of biofilm-induced bio-aging on corrosion behavior of different implant materials surface.

MATERIALS AND METHODS

Commercial polished titanium (Polish), sand-blasted, large grit, acid-etched surface treated titanium (SLA), microarc oxidation (MAO), and hydroxyapatite (HA) coated titanium were bio-aged with saliva biofilm for 30 days. Titanium surfaces topography, chemical composition, roughness, and water contact angle changes were evaluated. In addition, human gingival fibroblasts (HGFs) adhesion, Streptococcus sanguinis (S. sanguinis) biofilm formation were determined.

RESULTS

Surface topography, roughness, and chemical composition have no significant changes for all groups after bio-aging (P > .05). Water contact angle of bio-aged SLA was greatly increased (P < .05). While other groups showed no sign of change (P > .05). Adhesion and proliferation of HGFs on the bio-aged SLA titanium surfaces were decreased (P < .05), but increased on bio-aged Polish and HA titanium (P < .05). S. sanguinis biofilm viability was promoted with bio-aging in HA group (P < .05).

CONCLUSIONS

Biological characteristics of Polish, SLA, and HA titanium surfaces were influenced by bio-aging. While MAO group was relatively resistant to saliva biofilm bio-aging.

Properties of Nanohydroxyapatite Coatings Doped with Nanocopper, Obtained by Electrophoretic Deposition on Ti13Zr13Nb Alloy

Nowadays, hydroxyapatite coatings are the most common surface modification of long-term implants. These coatings are characterized by high thickness and poor adhesion to the metallic substrate. The present research is aimed at characterizing the properties of nanohydroxyapatite (nanoHAp) with the addition of copper nanoparticle (nanoCu) coatings deposited on the Ti13Zr13Nb alloy by an electrophoresis process. The deposition of coatings was carried out for various amounts of nanoCu powder and various average particle sizes. Microstructure, topography, phase, and chemical composition were examined with scanning electron microscopy, atomic force microscopy, and X-ray diffraction. Corrosion properties were determined by potentiodynamic polarization technique in simulated body fluid. Nanomechanical properties were determined based on nanoindentation and scratch tests. The wettability of coatings was defined by the contact angle. It was proven that nanoHAp coatings containing nanocopper, compared to nanoHAp coatings without nanometals, demonstrated smaller number of cracks, lower thickness, and higher nanomechanical properties. The influence of the content and the average size of nanoCu on the quality of the coatings was observed. All coatings exhibited hydrophilic properties. The deposition of nanohydroxyapatite coatings doped with nanocopper may be a promising way to improve the antibacterial properties and mechanical stability of coatings.

Enhanced Mechanical and Electrochemical Performances of Silica-Based Coatings Obtained by Electrophoretic Deposition

To solve the existing problems of silicon dioxide (SiO₂) coating fabricated by the sol-gel method, such as complicated process, long production cycle, uncontrollable quality, etc., an improved electrophoretic deposition (EPD) combined with the sintering process was proposed to prepare SiO₂ coating on a dark nickel (Ni)-coated Q235 steel substrate. Silica sol was prepared by basic catalysis, containing silica of ∼130 g L^-1 with viscosities below 4 mPa s. Silica sol powder was characterized by the differential thermal analysis, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. EPD was applied to prepare SiO₂ coating on the Ni adhesive layer, followed by the sintering process to improve the compactness. In addition, the effects of EPD and sintering parameters were also evaluated. Potentiodynamic polarization and electrochemical impedance spectra were utilized to assess the corrosion behavior of the coating. The results showed that the EPD coating demonstrated excellent wear resistance when deposited at 15 V for 40 s and sintered at 400 °C for 45 min, exhibiting ∼6 μm thickness and a compact morphology. It also showed superior corrosion resistance with i_corr of 1.02 × 10^-7 A cm^-2, which was 2 orders of magnitude lower than that of dip-coating. Combining the EPD and sintering processes could shorten the fabrication period of SiO₂ inorganic coating and also improve the mechanical and corrosion properties, providing guidance for inorganic ceramic fabrication and showing potential for practical applications.

Biocomposites based on hydroxyapatite matrix reinforced with nanostructured monticellite (CaMgSiO4) for biomedical application: Synthesis, characterization, and biological studies

In this study, a simple and facile strategy was developed for the synthesis of novel hydroxyapatite (HA)/nanostructured monticellite ceramic composites by mechanical method. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive x-ray spectroscopy (EDS) were used to peruse the phase structure, and morphology of soaked ceramic composites in simulated body fluid (SBF). The in vitro bioactivity of HA-based ceramic composites with nanostructured monticellite ranging from 0 to 50 wt% was evaluated via investigating the formation ability of bone-like calcium phosphates in SBF and the effect of obtained extracts from composites dissolution on osteoblast-like G-292 cell line. Moreover, In vitro cytocompatibility of the HA/monticellite ceramic composites was investigated by MTT, cell growth & adhesion and alkaline phosphatase (ALP) activity assays, and quantitative real-time PCR analysis. The results showed that HA/nanostructured monticellite ceramic composites could induce apatite formation in SBF. The cell proliferation and growth exposed to ceramic composites extracts were significantly stimulated and promoted at a certain concentration range compared to control for various time periods of cell culture. The optimized composite extract enhanced considerably gene expression of G-292 type X collagen (COLX) at different days. Also, G-292 cells were spread and adhered well on the ceramic composite disc. Furthermore, ALP activity of G-292 cells exposed to ceramic composites extracts was dramatically enhanced in comparison with pure HA extract (as control) at different concentrations for various time periods of cell culture. The results suggest that the optimized HA/nanostructured monticellite composite is promising biomaterial for clinical applications such as orthopedic and dentistry.

Effects of hexagonal boron nitride nanoparticles on antimicrobial and antibiofilm activities, cell viability

The objective of this work was to investigate the antimicrobial and antibiofilm activities of hBN nanoparticles against Streptococcus mutans 3.3, Staphylococcus pasteuri M3, Candida sp. M25 and S. mutans ATTC 25175. Minimum Inhibitory Concentration (MIC) of hBN nanoparticles were determined against Streptococcus mutans 3.3, Staphylococcus pasteuri M3, Candida sp. M25 growth. In addition, we aimed to evaluate the cytotoxic effects of hBN nanoparticles on human normal skin fibroblast (CCD-1094Sk, ATCC® CRL 2120 ™) and Madin Darby Canine Kidney (MDCK) cells by using various toxicological endpoints. Cell viability was assessed by MTT, SRB and PicoGreen assays. After experimental analyses, it was revealed that hBN nanoparticles show better MIC results. The MIC values were higher for Streptococcus mutans ATTC 25175 and Staphylococcus pasteuri M3 and lower against Streptococcus mutans 3.3, Candida sp. M25. Surprisingly, hBN nanoparticles showed a high antibiofilm activity on preformed biofilm, which inhibited biofilm growth of S. mutans 3.3, S. mutans ATTC 25175 and Candida sp.M25. These results show that hBN nanoparticles may be an option to control oral biofilms. In cell viability tests, the cells were exposed to 0.025-0.4 mg/mL concentrations of hBN nano particle suspension. The exposure time to the hBN nanoparticle suspensions were 24 h and 48 h. The results indicate that there is no cytotoxic effect on CRL 2120 and MDCK cells at the concentration range of 0.025-0.1 mg/mL. However, on both first and second day, hBN caused mild cytotoxicity on CRL-2120 cells at high hBN concentration (0.2-0.4 mg/mL). Considering all the results of this study, in appropriate concentration (0.1 mg/mL) hBN nanoparticles can be considered a potential safe oral care product.