Antibacterial modification of PET with quaternary ammonium salt and silver particles via electron-beam irradiation

A Comparative Study of Structural Contribution to Biocidability via Immobilization of Fluorinated and Nonfluorinated Quaternary Ammonium Salts on Top Surfaces

Higher biocidability of fluorinated quaternary ammonium salt (QAS) is usually contributed to its preferential segregation to the surface to better contact with and kill bacteria. However, whether its structure also elicits better performance is still unclear. Herein, the same amount of a fluorinated QAS and its nonfluorinated counterpart are both immobilized on the top surface to eliminate the effect of concentration distribution to only study their structure-biocidability relationship. Briefly, the fluorinated and nonfluorinated QASs were synthesized by quaternization of N,N-dimethylethanolamine with 2-(perfluorooctyl)ethyl bromide that was prepared by bromination of 2-(perfluorooctyl)ethanol and 1-bromodecane, respectively. Polystyrene (PS) and diblock copolymer poly(styrene)-b-poly(tert-butyl acrylate) (PS-PtBA) were successively spin coated on SiO2 wafers at different concentrations to form bilayer structures that have a PS base layer and a PtBA top layer. The tert-butyl acrylate groups of the PtBA layer of 0.9 nm were converted to carboxylic acid groups with trifluoroacetic acid for respective esterification with the two hydroxy-containing QASs. It was observed that the fluorinated and nonfluorinated surfaces fabricated at the maximum comparable esterification yield of 63.5% fully eradicated ∼104 CFU of Staphylococcus aureus and Escherichia coli in 120 and 150 min, respectively, indicating that the fluorocarbon chain is more biocidal through better interpenetration into bacterial membranes. Immobilization of a functionality on top surface provides a universal strategy to study its structural contribution to activity without interference of the concentration distribution.

Fighting against biofilm: The antifouling and antimicrobial material

Biofilms are groups of microorganisms protected by self-secreted extracellular substances. Biofilm formation on the surface of biomaterial or engineering materials becomes a severe challenge. It has caused significant health, environmental, and societal concerns. It is believed that biofilms lead to life-threatening infection, medical implant failure, foodborne disease, and marine biofouling. To address these issues, tremendous effort has been made to inhibit biofilm formation on materials. Biofilms are extremely difficult to treat once formed, so designing material and coating bearing functional groups that are capable of resisting biofilm formation has attracted increasing attention for the last two decades. Many types of antibiofilm strategies have been designed to target different stages of biofilm formation. Development of the antibiofilm material can be classified into antifouling material, antimicrobial material, fouling release material, and integrated antifouling/antimicrobial material. This review summarizes relevant research utilizing these four approaches and comments on their antibiofilm properties. The feature of each method was compared to reveal the research trend. Antibiofilm strategies in fundamental research and industrial applications were summarized.

From Antibacterial to Antibiofilm Targeting: An Emerging Paradigm Shift in the Development of Quaternary Ammonium Compounds (QACs)

In a previous development stage, mostly individual antibacterial activity was a target in the optimization of biologically active compounds and antiseptic agents. Although this targeting is still valuable, a new trend has appeared since the discovery of superhigh resistance of bacterial cells upon their aggregation into groups. Indeed, it is now well established that the great majority of pathogenic germs are found in the environment as surface-associated microbial communities called biofilms. The protective properties of biofilms and microbial resistance, even to high concentrations of biocides, cause many chronic infections in medical settings and lead to serious economic losses in various areas. A paradigm shift from individual bacterial targeting to also affecting more complex cellular frameworks is taking place and involves multiple strategies for combating biofilms with compounds that are effective at different stages of microbiome formation. Quaternary ammonium compounds (QACs) play a key role in many of these treatments and prophylactic techniques on the basis of both the use of individual antibacterial agents and combination technologies. In this review, we summarize the literature data on the effectiveness of using commercially available and newly synthesized QACs, as well as synergistic treatment techniques based on them. As an important focus, techniques for developing and applying antimicrobial coatings that prevent the formation of biofilms on various surfaces over time are discussed. The information analyzed in this review will be useful to researchers and engineers working in many fields, including the development of a new generation of applied materials; understanding biofilm surface growth; and conducting research in medical, pharmaceutical, and materials sciences. Although regular studies of antibacterial activity are still widely conducted, a promising new trend is also to evaluate antibiofilm activity in a comprehensive study in order to meet the current requirements for the development of highly needed practical applications.

Dual Coordination between Stereochemistry and Cations Endows Polyethylene Terephthalate Fabrics with Diversiform Antimicrobial Abilities for Attack and Defense

Modification of fabrics by stereochemical antiadhesion strategies is an emerging approach to antimicrobial fabric finishing. However, a purely antiadhesive fabric cannot avoid the passive adhesion of pathogenic microorganisms. To address this issue, borneol 4-formylbenzoate (BF) with a stereochemical structure is introduced into a cationic polymer PEI-modified PET fabric by a simple two-step method. The obtained fabric exhibits remarkable features of high bactericidal activity, excellent resistance to bacterial adhesion, desirable fungal repellent performance, and low cytotoxicity. More impressively, this modified fabric not only effectively reduces microbial contamination during food preservation but also plays a role in avoiding infection and accelerating wound healing in the mouse wound model. The dual coordination between stereochemistry and cations is validated as a viable "attack and defense" antimicrobial strategy, providing an effective guide for diversiform antimicrobial designs.

Regulation of Staphylococcus aureus Virulence and Application of Nanotherapeutics to Eradicate S. aureus Infection

Staphylococcus aureus is a versatile pathogen known to cause hospital- and community-acquired, foodborne, and zoonotic infections. The clinical infections by S. aureus cause an increase in morbidity and mortality rates and treatment costs, aggravated by the emergence of drug-resistant strains. As a multi-faceted pathogen, it is imperative to consolidate the knowledge on its pathogenesis, including the mechanisms of virulence regulation, development of antimicrobial resistance, and biofilm formation, to make it amenable to different treatment strategies. Nanomaterials provide a suitable platform to address this challenge, with the potential to control intracellular parasitism and multidrug resistance where conventional therapies show limited efficacy. In a nutshell, the first part of this review focuses on the impact of S. aureus on human health and the role of virulence factors and biofilms during pathogenesis. The second part discusses the large diversity of nanoparticles and their applications in controlling S. aureus infections, including combination with antibiotics and phytochemicals and the incorporation of antimicrobial coatings for biomaterials. Finally, the limitations and prospects using nanomaterials are highlighted, aiming to foster the development of novel nanotechnology-driven therapies against multidrug-resistant S. aureus.

Surface antimicrobial functionalization with polymers: fabrication, mechanisms and applications

Undesirable adhesion of microbes such as bacteria, fungi and viruses onto surfaces affects many industries such as marine, food, textile, and healthcare. In particular in healthcare and food packaging, the effects of unwanted microbial contamination can be life-threatening. With the current global COVID-19 pandemic, interest in the development of surfaces with superior anti-viral and anti-bacterial activities has multiplied. Polymers carrying anti-microbial properties are extensively used to functionalize material surfaces to inactivate infection-causing and biocide-resistant microbes including COVID-19. This review aims to introduce the fabrication of polymer-based antimicrobial surfaces through physical and chemical modifications, followed by the discussion of the inactivation mechanisms of conventional biocidal agents and new-generation antimicrobial macromolecules in polymer-modified antimicrobial surfaces. The advanced applications of polymer-based antimicrobial surfaces on personal protective equipment against COVID-19, food packaging materials, biomedical devices, marine vessels and textiles are also summarized to express the research trend in academia and industry.

Thermo-Responsive Hydrophilic Support for Polyamide Thin-Film Composite Membranes with Competitive Nanofiltration Performance

Poly(N-isopropylacrylamide) (PNIPAAm) was introduced into a polyethylene terephthalate (PET) nonwoven fabric to develop novel support for polyamide (PA) thin-film composite (TFC) membranes without using a microporous support layer. First, temperature-responsive PNIPAAm hydrogel was prepared by reactive pore-filling to adjust the pore size of non-woven fabric, creating hydrophilic support. The developed PET-based support was then used to fabricate PA TFC membranes via interfacial polymerization. SEM–EDX and AFM results confirmed the successful fabrication of hydrogel-integrated non-woven fabric and PA TFC membranes. The newly developed PA TFC membrane demonstrated an average water permeability of 1 L/m² h bar, and an NaCl rejection of 47.0% at a low operating pressure of 1 bar. The thermo-responsive property of the prepared membrane was studied by measuring the water contact angle (WCA) below and above the lower critical solution temperature (LCST) of the PNIPAAm hydrogel. Results proved the thermo-responsive behavior of the prepared hydrogel-filled PET-supported PA TFC membrane and the ability to tune the membrane flux by changing the operating temperature was confirmed. Overall, this study provides a novel method to fabricate TFC membranes and helps to better understand the influence of the support layer on the separation performance of TFC membranes.

Electron beam irradiation treatment of textiles materials: a review

Electron beam irradiation technology has gained more attention as it appears to be a promising economically and environmentally sustainable alternative to traditional wet-chemical processing. It is an advanced approach that is clean, solvent-free, time-saving, and ecologically benign with acceptable handling and operation properties. This review provides a study of the latest literature on the technology of electron beam irradiation surface modification of textile. Considerable emphasis is also placed on the most novel applications of electron beam irradiation such as the functionalization of textile materials, which leads to the development of alternative sustainable techniques or revolutionary advanced materials soon.

Graphical abstract

Inserting Menthoxytriazine into Poly(ethylene terephthalate) for Inhibiting Microbial Adhesion

Antimicrobial modification of poly(ethylene terephthalate) (PET) is effective in preventing the adhesion and growth of microorganisms on its surface. However, few methods are available to modify PET directly at its backbone to impart the antimicrobial effect. Herein, menthoxytriazine-modified PET (PMETM) based on the stereochemical antimicrobial strategy was reported. This novel PET was prepared by inserting menthoxytriazine into the PET backbone. The antibacterial adhesion test and the antifungal landing test were employed to confirm the antiadhesion ability of PMETM. PMETM could effectively inhibit the adhesion of bacteria, with inhibition ratios of 99.9 and 99.7% against Escherichia coli (Gram-negative) and Bacillus subtilis (Gram-positive), respectively. In addition, PMETM exhibited excellent resistance to Aspergillus niger (fungal) contamination for more than 30 days. Cytotoxicity assays indicated that PMETM was a noncytotoxic material. These results suggested that the insertion of menthoxytriazine in the PET backbone was a promising strategy to confer antimicrobial properties to PET.

Phosphonate/quaternary ammonium copolymers as high-efficiency antibacterial coating for metallic substrates

Designing a coating material with efficient bactericidal property to cope with bacterial associated infections is highly desirable for metallic implants and devices. Here, we report phosphonate/quaternary ammonium copolymers, p(DEMMP-co-TMAEMA), as the new type of metal anchorable high-efficiency antibacterial coating. Seven p(DEMMP-co-TMAEMA) polymers with varied cationic components were precisely prepared via random radical polymerization. Copolymers were constructed on titanium alloy (TC4) substrates based on strong covalent bonding between the phosphonate group and metallic substrates through a one-step process as evidenced by XPS and water contact angle tests. A robust relationship between the composition of the copolymers and the bactericidal ability endowed to TC4 substrates was established. Results showed that the copolymer, with the pDEMMP content even as low as 6.3%, was able to anchor onto TC4 substrates. With the increase of cationic pTMAEMA content from 4.0 to 93.7% in the coating copolymer, the bactericidal ability endowed to the TC4 substrates was steadily increased from 39.4 to 98.8% for S. aureus and from 70.0 to 99.4% for E. coli after 8 h's of contacting. All p(DEMMP-co-TMAEMA) coating on TC4 substrates showed limited cytotoxicity to C2C12 cells. Notably, the phosphonate/quaternary amine copolymers can be easily constructed on diverse biomedical metals such as titanium (Ti), stainless steel (SS), and Ni/Cr alloys with significantly increased antibacterial performance, demonstrating the potency of the copolymer as the general high-efficiency antibacterial coating for diverse bio-metals.

Mapping the scientific research on the ionizing radiation impacts on polymers (1975–2019)

A bibliometric approach allowed us to study the global research trend on the impact of ionizing irradiations on polymers from 1975 to 2019. The investigation revealed 1,015 publications with growing interest since 1990. The research is split into three main categories: polymer science, nuclear science technology, and chemistry physical. The three main ionizing irradiations studied in this research are gamma, electron beam, and X-ray irradiations. The impact of ionizing irradiations on polymers under gamma irradiation is the most commonly studied field with 578 publications among the 1,015 publications. Electron beam irradiation is the second most studied field followed by X-ray irradiation. Whatever the irradiation modalities, publications focus on material degradation and material improvement studies.

Non-Leaching, Rapid Bactericidal and Biocompatible Polyester Fabrics Finished with Benzophenone Terminated N-halamine

Pathogenic bacteria can proliferate rapidly on porous fabrics to form bacterial plaques/biofilms, resulting in potential sources of cross-transmissions of diseases and increasing cross-infection in public environments. Many works on antibacterial modification of cotton fabrics have been reported, while very few works were reported to endow poly(ethylene terephthalate) (PET) fabrics with non-leaching antibacterial function without compromising their innate physicochemical properties though PET is the most widely used fabric. Therefore, it is urgent to impart the PET fabrics with non-leaching antibacterial activity. Herein, a novel N-halamine compound, 1-chloro-3-benzophenone-5,5-dimethylhydantoin (Cl-BPDMH), was developed to be covalently bonded onto PET fabrics, rendering non-leaching antibacterial activity while negligible cytotoxicity based on contact-killing principle. Bacterial was easily adhered to Cl-BPDMH finished PET fabrics, and then it was inactivated quickly within 10 s. Furthermore, the breaking strength, breaking elongation, tearing strength, water vapor permeability, air permeability and whiteness of Cl-BPDMH finished PET fabrics were improved obviously compared to raw PET fabrics. Hence, this work developed a facile approach to fabricate multifunctional synthetic textiles to render outstanding and rapid bactericidal activity without compromising their physicochemical properties and biocompatibility.

Supplementary Information

The online version contains supplementary material available at 10.1007/s42765-021-00100-z.

A Synthetic Overview of Preparation Protocols of Nonmetallic, Contact-Active Antimicrobial Quaternary Surfaces on Polymer Substrates

Antibacterial surfaces have been researched for more than 30 years and remain highly desirable. In particular, there is an interest in providing antimicrobial properties to commodity plastics, because these, in their native state, are excellent substrates for pathogens to adhere and proliferate on. Therefore, efficient strategies for converting surfaces of commodity plastics into contact-active antimicrobial surfaces are of significant interest. Many systems have been prepared and tested for their efficacy. Here, the synthetic approaches to such active surfaces are reviewed, with the restriction to only include systems with tested antibacterial properties. The review focuses on the synthetic approach to surface functionalization of the most common materials used and tested for biomedical applications, which effectively has limited the study to quaternary materials. For future developments in the field, it is evident that there is a need for development of simple methods that permit scalable production of active surfaces. Furthermore, in terms of efficacy, there is an outstanding concern of a lack of universal antimicrobial action as well as rapid deactivation of the antibacterial effect through surface fouling.

Enhanced Polymerization and Surface Hardness of Colloidal Siloxane Films via Electron Beam Irradiation

Electron beam (EB) curing is a foldable hard coating process and has attracted significant research attention in the field of flexible electronic devices. In this study, we report a method for enhancing material surface hardness with low-energy EB curing in a short time. The low-energy EB improved the coating hardness of films by inducing cross-linking polymerization of the silicon-containing monomer. The hardness of the cured coating layer was measured as 3 H using a pencil hardness tester, and the transparency of the coating was higher than 90%. Owing to a series of cross-linking reactions between Si-O-C and Si-OH groups under EB curing and the formation of Si-Si bonds, the cured layer exhibited remarkable durability in the 100000-flexible cycle test. Additionally, the natural oxidation of the C-O groups on the surface of the coating formed carboxyl groups that improved the hydrophilic properties of the coating layer. To the best of our knowledge, this is the first study to propose that the hardness of polyethylene terephthalate films can be improved using low-energy EBs to rapidly cure silicon-containing coatings. Our results provide a novel and commercially viable approach for improving the hardness of touch screens and foldable displays.

Synthesis of novel multi-hydroxyl N-halamine precursors based on barbituric acid and their applications in antibacterial poly(ethylene terephthalate) (PET) materials

Two novel multi-hydroxyl N-halamine precursors were successfully synthesized in a green and facile way via Knoevenagel condensation reaction between barbituric acid and an aldehyde (citral or cinnamaldehyde), followed by a hydroxylation reaction with hydrogen peroxide. 1H-NMR and FT-IR spectral analyses confirmed their formation. Through the melt-blending process, the multi-hydroxyl derivatives of barbituric acid were introduced via transesterification into poly(ethylene terephthalate) (PET) at 265 °C in a rheometer. The crystallization behaviors of the modified PET samples were investigated using X-ray diffraction (XRD), differential scanning calorimetry (DSC), and polarized optical microscopy (POM) analyses. The results showed that the crystallization temperature and crystallization rate of PET were significantly improved upon the introduction of the precursor. Meanwhile, the relative crystallinity of the modified PET samples increased with an increase in the dosage of the N-halamine precursor. After the treatment with sodium hypochlorite solution, the PET surfaces modified with N-halamine derivatives would impart powerful antibacterial properties and achieve 100% killing of Staphylococcus aureus (ATCC 6538) and Escherichia coli (CMCC44103) cells within 30 min. Therefore, the multi-hydroxyl N-halamine precursors exhibit great potential as bifunctional additives (nucleating and antibacterial agents) in the manufacturing of functional PET materials.

Synthesis and characterization of cotton-silver-graphene quantum dots (cotton/Ag/GQDs) nanocomposite as a new antibacterial nanopad

Appearance of antibiotic resistance in bacteria is a convoluted topic, particularly in treating pestiferous immunodeficiency correlated diseases. The main objective of the current research is to fabricate antibacterial pads by utilizing of graphene quantum dots (GQDs) as a linker, stabilizing, and reduction agent of in situ synthesized Ag nanoparticles (Ag NPs) on cotton pad. Five different antibacterial pads including cotton/Ag pad, cotton/GQDs/Ag pad, cotton/Ag/GQDs pad, cotton/GQDs/Ag/GQDs pad, and cotton/Ag/GQDs/Ag were fabricated and their antibacterial activities were compared to those of as-synthesized Ag/GQDs nanocomposites. The results indicate that cotton/GQDs/Ag pad shows a very promising minimum inhibitory concentration(MIC) of 0.09 and 0.01 against S. aureus and E. coli, respectively. Using GQDs as a linker (cotton/GQDs/Ag) and as a stabilizing agent (cotton/Ag/GQDs) significantly improves the antibacterial activity of Ag NPs.

Supercritical carbon dioxide application using hydantoin acrylamide for biocidal functionalization of polyester

Biocidal functionalization in polyester fibers is a really tough challenge because of the lack of tethering groups. This study indicated supercritical carbon dioxide application using N-halamine would be an alternative solution for obtaining antibacterial function on the polyester surface. Firstly, N-(2-methyl-1-(4-methyl-2,5-dioxo-imidazolidin-4 yl)propan-2 yl)acrylamide was synthesized and applied to the polyester in supercritical carbon dioxide medium, at 120 °C, 30 MPa for different processing times. The addition of N-halamine on the surface significantly brought antibacterial activity against E. coli. The chlorine loadings showed that 6 -h exposure time was critical to obtain sufficient antibacterial activity. This treatment caused a reasonable and tolerable loss in color and mechanical properties. But, the durability to abrasion, stability, and rechargeability of oxidative chlorine, and the durability of N-halamine on the surface were remarkably good. Conclusively, it can be available to work on polyester surfaces with resource-efficient and eco-friendly supercritical carbon dioxide technique for getting more functionalization and modification.

Novel composite unit with one pyridinium and three N-halamine structures for enhanced synergism and superior biocidability on magnetic nanoparticles

A novel composite unit of enhanced synergism that rises from the use of a cationic pyridinium structure to attract anionic bacteria to three N-halamine structures was designed for superior biocidability on recyclable magnetic nanoparticles. Briefly, 5-(4-hydroxybenzylidene)hydantoin (HBH), containing one imide and amide NH bonds, was synthesized by Knoevenagel condensation ofp-hydroxybenzaldehyde with hydantoin. 3-Triethoxysilylpropyl succinic anhydride was ammonolyzed with 4-aminopyridine to introduce a pyridine structure and form an amide NH and a carboxylic acid group that was esterified with HBH to introduce its two NH bonds. The triethoxysilyl groups of the esterification product were hydrolyzed into silanols to condense with the counterparts of different hydrolysates and on silica modified Fe₃O₄nanoparticles to provide a layer of polymeric modifier. After quaternization of the pyridine and chlorination of NH bonds from each esterification product, the resultant layer is composed of units each of which contains one pyridinium and threeN-halamine sites and exerted higher biocidability against Escherichia coli and Staphylococcus aureus than comparable systems including synergistic ones with one cationic center and one N-halamine, demonstrating an enhanced synergism. The biocidal layer had promising stability under quenching-chlorinating cycles and long-term storage. The study affords a strategy for syntheses of more powerful biocidal surfaces.

Facile fabrication of cytocompatible polyester fiber composite incorporated via photocatalytic nano copper ferrite/myristic-lauric fatty acids coating with antibacterial and hydrophobic performances

Benign polymeric and textile based materials having multifaceted features such as antibacterial performance, hydrophobic property and photocatalytic activity are highly interesting from the both human health and environment observations. Herein, a cytocompatible polyester fiber composite incorporated via photocatalytic nano copper ferrite/myristic-lauric fatty acids coating with antibacterial and hydrophobic performances was prepared through one-pot facile fabrication route. X-ray diffraction analysis, energy-dispersive X-ray spectroscopy, mapping images, Field-emission scanning electron microscope and Fourier transform infrared spectra were accomplished to indemnify the prepared composites. An appropriate hydrophobic feature with maximum water contact angle of 143° was achieved for the fabricated sample. Moreover, the prepared samples demonstrated excellent antibacterial effect (100%) toward pathogenic bacteria comprising Escherichia coli as Gram-negative and Staphylococcus aureus as Gram-positive bacteria. The impact of the prepared samples on normal human skin fibroblast was further verified according to the cytotoxicity test (MTT). Adjusting the copper ferrite dosage in the composite as well as presence of fatty acids as benign materials surrounding nanoparticles led to decline the cytotoxicity of the fabricated samples. The prepared composite also showed excellent activity against degradation of methylene blue dye under daylight irradiation. On the whole, cytocompatible nano copper ferrite/fatty acids/polyester composites with bio and photo catalytic activities and hydrophobic property fabricated by effective and one-pot approach could be useful for applying in various industries such as medical, polymers, textiles and water treatment industries.

Studies of PET nonwovens modified by novel antimicrobials configured with both N-halamine and dual quaternary ammonium with different alkyl chain length

This work describes the synthesis of novel antimicrobial agents consisting of N-halamine and dual quaternary ammonium with different alkyl chain lengths and their antimicrobial applications for PET nonwovens.

One-pot fabrication of durable antibacterial cotton fabric coated with silver nanoparticles via carboxymethyl chitosan as a binder and stabilizer

In this article, durable antimicrobial cotton fabric was prepared by a one-pot modification process using a colloidal solution of silver nanoparticles (Ag NPs) stabilized by carboxymethyl chitosan (CMC). Due to coordination bonds between the amine groups of CMC and the Ag NPs and the ester bonds present between the carboxyl groups of CMC and the hydroxyl groups of cellulose, the Ag NPs were tightly immobilized onto the cotton fiber surface. As a result, the Ag NPs that were adhered on the cotton fabrics have uniform dispersion and small size, ranging from 10 nm to 80 nm. This provides the cotton fabric with remarkable and durable antibacterial activity against both S. aureus and E. coli. After 50 laundering cycles, the bacterial reduction rate (BR) for the modified cotton fabric remained over 94%. This method is simple, and it is particularly suitable for the industrial finishing process.