Fabrication of magnetite-functionalized-graphene oxide and hexadecyltrimethyl ammonium bromide nanocomposite for efficient nanosorption of sunset yellow

Modeling sunset yellow removal from fruit juice samples by a novel chitosan-nickel ferrite nano sorbent

Analysis of food additives is highly significant in the food industry and directly related to human health. This investigation into the removal efficiency of sunset yellow as an azo dye in fruit juices using Chitosan-nickel ferrite nanoparticles (Cs@NiFe2O4 NPs). The nanoparticles were synthesized and characterized using various techniques. The effective parameters for removing sunset yellow were optimized using the response surface methodology (RSM) based on the central composite design (CCD). Under the optimum conditions, the highest removal efficiency (94.90%) was obtained for the initial dye concentration of 26.48 mg L-1 at a pH of 3.87, a reaction time of 67.62 min, and a nanoparticle dose of 0.038 g L-1. The pseudo-second-order kinetic model had a better fit for experimental data (R2 = 0.98) than the other kinetic models. The equilibrium adsorption process followed the Freundlich isotherm model with a maximum adsorption capacity of 212.766 mg g-1. The dye removal efficiency achieved for industrial and traditional fruit juice samples (91.75% and 93.24%), respectively, confirmed the method's performance, feasibility, and efficiency. The dye adsorption efficiency showed no significant decrease after five recycling, indicating that the sorbent has suitable stability in practical applications. variousThe synthesized nanoparticles can be suggested as an efficient sorbent to remove the sunset yellow dye from food products.

Porous polymer magnetic adsorbents for dye wastewater treatment

Dye wastewater discharged from industries has caused serious environmental problems. The recent decade has witnessed adsorption technology emerging as an advanced dye wastewater treatment method with great potential Therefore, we fabricated two kinds of magnetic porous adsorbents (HSF and HSVF) with different specific surface areas and activity sites. Both of which exhibit excellent performance with remarkable dye adsorption capacities, especially HSVF. We further investigated their adsorption kinetic and isotherm in detail. Therein, HSVF showed a nice desorption capacity, and it could be recycled rapidly by magnetism, which exhibited the advantages of effective, easy operation, and low cost. In addition, their adsorption kinetic and isotherm were further studied and compared in detail. The results revealed that introducing strong active sites could improve both the adsorption capacity and rate effectively even though sacrificing part of specific surface areas, indicating that active sites might play a dominant role during the dye adsorption process.

Synthesis of molecularly imprinted polymer as a nanosorbent for dispersive magnetic micro solid-phase extraction and determination of valsartan in biological samples by UV-Vis Spectrophotometry: Isotherm, kinetics, and thermodynamic studies

A magnetic molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization utilizing Fe₃O₄@SiO₂-MPS as a magnetic core, itaconic acid as a functional monomer, azobisisobutyronitrile as an initiator, and ethylene glycol dimethacrylate as a cross linker. It was then applied as a nanosorbent for dispersive magnetic micro solid phase extraction (DM-µ-SPE) and determination of valsartan in biological fluids. The morphology and structure of magnetic MIP were characterized by Fourier-transform infrared spectroscopy, Field Emission Scanning electron microscopy, Vibrating sample magnetometer, Energy dispersive x-ray analysis, and Thermogravimetric analysis. The influence of operation conditions on sorption, such as pH (4-10), contact time (10-25 min), initial concentration (1-30 mg L^-1), and temperature (25-40 °C) was investigated. After the extraction step, the valsartan concentration was determined by UV-Vis spectrophotometer at 253 nm. The isotherm and kinetic of valsartan sorption were best fitted by the Langmuir model (R² = 0.987) and the Pseudo second-order kinetic model (R² = 0.971), respectively. The maximum monolayer sorption capacity for magnetic MIP was obtained to be 4.56 mg g^-1. The analytical approach demonstrated favorable figures of merit, with a linear dynamic range of 10-100 µg L^-1, a low detection limit of 0.56 µg L^-1, and an acceptable preconcentration factor of 5 acquired in optimum conditions. The recoveries of the suggested technique at three spiked levels of analysis were in the range of 101 %-102 %. Valsartan was extracted from various real samples (urine and human blood plasma samples) utilizing the proposed magnetic nanosorbent, and the results exhibited that magnetic MIP was favorable for extraction and measurement of trace amounts of valsartan in biological samples.

Sulfidated microscale zero-valent iron/reduced graphene oxide composite (S-mZVI/rGO) for enhanced degradation of trichloroethylene: The role of hydrogen spillover

Atomic hydrogen (H*) has long been thought to play an important role in the dechlorination of trichloroethylene (TCE) by carbon-supported zero-valent iron (ZVI), which offers an alternative pathway for TCE dechlorination. Herein, we demonstrate that the reductive dechlorination of TCE by sulfidated microscale ZVI (S-mZVI) can be further enhanced by promoting the formation of H* through the introduction of reduced graphene oxide (rGO). The completely degradation of 10 mg/L TCE can be achieved by S-mZVI/rGO within 24 h, which was 3.3 times faster than that of S-mZVI. The change in the distribution of TCE degradation products over time suggests that the introduction of rGO leads to a change in the dechlorination pathway. The percentage of ethane in the final products of TCE degradation by S-mZVI/rGO was 34.3 %, while that of S-mZVI was only 21.9 %. The electrochemical tests confirmed the occurrence of hydrogen spillover in the S-mZVI/rGO composite, which promoted the reductive dechlorination of TCE by H*. Although the S-mZVI/rGO composite had stronger hydrogen evolution propensity than S-mZVI, the S-mZVI/rGO composite still exhibited higher electron utilization efficiency than S-mZVI thanks to the increased utilization of hydrogen.

Magnetic Fe3O4 embedded chitosan-crosslinked-polyacrylamide composites with enhanced removal of food dye: Characterization, adsorption and mechanism

The water solubility in acid solution, relative low adsorption capacities and unsatisfactory separation performance limit application of traditional chitosan-based adsorbents in wastewater treatment. To break the limitation, a hydrophilic magnetic Fe₃O₄ embedded chitosan-crosslinked-polyacrylamide composites (abbreviated as m-CS-c-PAM) were prepared by a two-step method. The m-CS-c-PAM composites were systematically characterized using SEM, XRD, FTIR, VSM, TGA and BET. Sunset yellow (SY) was selected as model food dye to investigate adsorption kinetics and thermodynamic parameters of food dye adsorption onto m-CS-c-PAM. Compared with magnetic Fe₃O₄/chitosan, m-CS-c-PAM can adapt to a wider range of pH (2-10) and resist the presence of inorganic salts. m-CS-c-PAM was proved to have high adsorption capacity (359.71 mg g^-1) for SY dye at 298 K, much higher than magnetic Fe₃O₄/chitosan and many reported adsorbents. Moreover, m-CS-c-PAM could be rapidly and efficiently separated from treated solution within 15 s by an external magnet and regenerated by NaOH solution. With its excellent adsorption capacity, pH-independent adsorption capability for food dye, easy and convenient separation ability, satisfactory reusability, m-CS-c-PAM can be a promising material for food wastewater treatment.

Design and Preparation of Imidazole Ionic Liquid-Based Magnetic Polymers and Its Adsorption on Sunset Yellow Dye

Magnetic polymers are often used as loading materials for ionic liquids because of their excellent magnetic separation properties. In this study, a novel imidazolium-based ionic liquid-modified magnetic polymer was synthesized by suspension polymerization and grafting, denoted as γ-Fe₂O₃@GMA@IM, and this magnetic polymer was used for the adsorption of the acid dye FCF. The magnetic polymer was characterized by SEM, FTIR, XRD, VSM and TGA. These techniques were used to reveal the overall physical properties of magnetic polymers, including the presence of morphology, functional groups, crystalline properties, magnetism and thermal stability. Studies have shown that γ-Fe₂O₃@GMA@IM can adsorb FCF in a wide pH range (2–10), with a maximum adsorption capacity of 445 mg/g. The adsorption data were more in line with the pseudo-second-order kinetic model and the Freundlich isotherm. In order to investigate its reusability, this study used 10% NaCl as the desorption solution, and carried out five batches of adsorption–desorption cycles. After five cycles, the adsorption effect was maintained at 98.3%, which showed a good recycling performance.

Improved solid phase extraction for selective and efficient quantification of sunset yellow in different food samples using a novel molecularly imprinted polymer reinforced by Fe3O4@UiO-66-NH2

The overuse of synthetic dyes in food products has gradually increased in recent years, resulting food safety and human health has become a global issue. An innovative design of a magnetic molecularly imprinted polymer (Fe3O4@UiO-66-NH2@MIP) for efficient, fast, and selective determination of sunset yellow (SY) from different food products was described in this study. The absorption properties of Fe3O4@UiO-66-NH2@MIP were elucidated by adsorption kinetics, isotherms, reusability, and selectivity experiments. Because of the incorporation of porous Fe3O4@UiO-66-NH2nanocomposite into molecularly imprinted polymer an efficient nanosorbent with a short equilibrium time, a high adsorption capacity, and a good imprinting factor was finally obtained. The porous Fe3O4@UiO-66-NH2@MIP are also used for quantification of the SY. Under optimal conditions, good linearity (R2 0.9964) in the range of 1.0-120 mg L-1 and a low limit of detection (0.41 mg L-1) was observed with satisfactory recoveries (92.50-106.1%) and excellent reusability (RSD ≤ 6.6% after 12 cycles).

Thermally reduced graphene oxide as green and easily available adsorbent for Sunset yellow decontamination

The release of synthetic food dyes, like Sunset yellow, into industrial effluents can cause serious environmental and health problems. Due to its aromatic structure, it is recalcitrant towards degradation into non-toxic intermediates and its removal by efficient adsorption represents a cheap and efficient method. Herein we propose the use of thermally reduced graphene oxide (TRGO) as effective Sunset yellow dye adsorbent with an adsorption maximum capacity comparable with other sophisticated, chemically synthesized carbon-based nanomaterials. The reduced graphene oxide and the Sunset yellow adsorbed one were characterized by FT-IR, XPS and XRD spectroscopy, N₂ adsorption-desorption isotherm and TGA analysis. BET surface area reduced from 274.1 m²/g (for TRGO) to 39.9 m²/g (for TRGO-SY) showing that Sunset Yellow molecules occupied the corresponding active sites while the number of sheets resulted from the XRD spectra - from 3 to 8 in TRGO to 5 in TRGO-SY indicates the ordered intercalations in the graphene structure. The adsorption isotherm experimental data were better fitted with the Langmuir model than the Freundlich model, with the maximum adsorption capacity of the SY dye monolayer of 243.3 mg/g at pH = 6.0 and 189.0 mg/g from synthetic wastewater. The kinetic study revealed a perfect fit following the Pseudo-second order model with an equilibrium achieved within 30 min. The lack of adsorption on the starting graphene oxide is indicative for π-π interactions between the adsorbate and adsorbent.

Self-assembling of graphene oxide on carbon quantum dot loaded liposomes

This paper describes the design of stimuli-sensitive theranostic nanoparticles, composed of reduced graphene oxide (rGO) self-assembled on thermosensitive liposomes encapsulated doxorubicin (DOX) and carbon quantum dot (CQD) (CQD-DOX-rGO-Tlip). The rGO-Tlip particles have been observed to be flower-shaped objects. The thermoresponsive and theranostic potential of CQD-DOX-rGO-Tlips have been studied using differential scanning calorimetry (DSC), ultraviolet visible spectroscopy (UV-Vis), Raman spectroscopy and photoluminescent assays. The chemo-photothermal potential of rGO-Tlip on MD-MB-231 cells during NIR laser irradiation has been examined using MTT assay. Also, the ability of rGO-Tlip to be taken up by MD-MB-231 cells has been studied using confocal microscopy and flowcytometry. The results indicate that CQD-DOX-rGO-Tlips achieve a synergistic effect between photothermal therapy and chemotherapy for cancer treatment. Furthermore, online monitoring drug release is accomplished by studying the emission intensity of CQD while DOX released.

Thiol-/thioether-functionalized porous organic polymers for simultaneous removal of mercury(ii) ion and aromatic pollutants in water

Two novel thiol-/thioether-functionalized porous organic polymers were prepared for simultaneous removal of Hg(ii) and aromatic pollutants in water with high binding ability and fast uptake kinetics.