Improvement of calcium phosphate scaffold osteogenesis in vitro via combination of glutamate-modified BMP-2 peptides

Lethal puncturing of planktonic Gram-positive and Gram-negative bacteria by magnetically-rotated silica hexapods

Planktonic bacterial presence in many industrial and environmental applications and personal health-care products is generally countered using antimicrobials. However, antimicrobial chemicals present an environmental threat, while emerging resistance reduces their efficacy. Suspended bacteria have no defense against mechanical attack. Therefore, we synthesized silica hexapods on an α-Fe2O3 core that can be magnetically-rotated to inflict lethal cell-wall-damage to planktonic Gram-negative and Gram-positive bacteria. Hexapods possessed 600 nm long nano-spikes, composed of SiO2, as shown by FTIR and XPS. Fluorescence staining revealed cell wall damage caused by rotating hexapods. This damage was accompanied by DNA/protein release and bacterial death that increased with increasing rotational frequency up to 500 rpm. Lethal puncturing was more extensive on Gram-negative bacteria than on Gram-positive bacteria, which have a thicker peptidoglycan layer with a higher Young's modulus. Simulations confirmed that cell-wall-puncturing occurs at lower nano-spike penetration levels in the cell walls of Gram-negative bacteria. This approach offers a new way to kill bacteria in suspension, not based on antimicrobial chemicals.

Alkaline earth metals for osteogenic scaffolds: From mechanisms to applications

Regeneration of bone defects is a significant challenge today. As alternative approaches to the autologous bone, scaffold materials have remarkable features in treating bone defects; however, the various properties of current scaffold materials still fall short of expectations. Due to the osteogenic capability of alkaline earth metals, their application in scaffold materials has become an effective approach to improving their properties. Furthermore, numerous studies have shown that combining alkaline earth metals leads to better osteogenic properties than applying them alone. In this review, the physicochemical and physiological characteristics of alkaline earth metals are introduced, mainly focusing on their mechanisms and applications in osteogenesis, especially magnesium (Mg), calcium (Ca), strontium (Sr), and barium (Ba). Furthermore, this review highlights the possible cross-talk between pathways when alkaline earth metals are combined. Finally, some of the current drawbacks of scaffold materials are enumerated, such as the high corrosion rate of Mg scaffolds and defects in the mechanical properties of Ca scaffolds. Moreover, a brief perspective is also provided regarding future directions in this field. It is worth exploring that whether the levels of alkaline earth metals in newly regenerated bone differs from those in normal bone. The ideal ratio of each element in the bone tissue engineering scaffolds or the optimal concentration of each elemental ion in the created osteogenic environment still needs further exploration. The review not only summarizes the research developments in osteogenesis but also offers a direction for developing new scaffold materials.

The ROCK inhibitor Y-27632 ameliorates blood-spinal cord barrier disruption by reducing tight junction protein degradation via the MYPT1-MLC2 pathway after spinal cord injury in rats

The blood-spinal cord barrier (BSCB) is a physiological barrier between the blood and spinal cord parenchyma. This study aims to determine whether Y-27632, a Rho-associated protein kinase (ROCK) inhibitor, can protect the BSCB using in vivo models. The Evans blue fluorescence assay was used to detect leakage of the BSCB. Western blotting was used to define alterations in ROCK-related and tight junction (TJ) protein expression. Immunofluorescence triple-staining was used to evaluate histologic alterations in TJs. Locomotor function was evaluated using the open-field test, the Basso-Beattie-Bresnahan score, and footprint analysis. Two peaks of BSCB leakage after spinal cord injury (SCI) occurred at 24 h and 5 days. The ROCK inhibitor reduced the BSCB leakage at the second peak after SCI. Moreover, the ROCK inhibitor ameliorated the integrity of the BSCB and improved motor function recovery after SCI by regulating the phosphorylation of myosin phosphatase subunit-1 (MYPT1) and cofilin. ROCK inhibitors might protect the BSCB, which provides a new strategy for transitioning SCI treatment from the bench to bedside.

Design and applications of protein delivery systems in nanomedicine and tissue engineering

Proteins are biological macromolecules involved in a wide range of biological functions, which makes them very appealing as therapeutics agents. Indeed, compared to small molecule drugs, their endogenous nature ensures their biocompatibility and biodegradability, they can be used in a large range of applications and present a higher specificity and activity. However, they suffer from unfolding, enzymatic degradation, short half-life and poor membrane permeability. To overcome such drawbacks, the development of protein delivery systems to protect, carry and deliver them in a controlled way have emerged importantly these last years. In this review, the formulation of a wide panel of protein delivery systems either in the form of polymer or inorganic nanoengineered colloids and scaffolds are presented and the protein loading and release mechanisms are addressed. A section is also dedicated to the detection of proteins and the characterization methods of their release. Then, the main protein delivery systems developed these last three years for anticancer, tissue engineering or diabetes applications are presented, as well as the major in vivo models used to test them. The last part of this review aims at presenting the perspectives of the field such as the use of protein-rich material or the sequestration of proteins. This part will also deal with less common applications and gene therapy as an indirect method to deliver protein.

Osteogenic Properties of Novel Methylsulfonylmethane-Coated Hydroxyapatite Scaffold

Despite numerous advantages of using porous hydroxyapatite (HAp) scaffolds in bone regeneration, the material is limited in terms of osteoinduction. In this study, the porous scaffold made from nanosized HAp was coated with different concentrations of osteoinductive aqueous methylsulfonylmethane (MSM) solution (2.5, 5, 10, and 20%) and the corresponding MH scaffolds were referred to as MH2.5, MH5, MH10, and MH20, respectively. The results showed that all MH scaffolds resulted in burst release of MSM for up to 7 d. Cellular experiments were conducted using MC3T3-E1 preosteoblast cells, which showed no significant difference between the MH2.5 scaffold and the control with respect to the rate of cell proliferation (p > 0.05). There was no significant difference between each group at day 4 for alkaline phosphatase (ALP) activity, though the MH2.5 group showed higher level of activity than other groups at day 10. Calcium deposition, using alizarin red staining, showed that cell mineralization was significantly higher in the MH2.5 scaffold than that in the HAp scaffold (p < 0.0001). This study indicated that the MH2.5 scaffold has potential for both osteoinduction and osteoconduction in bone regeneration.

Controlled Delivery of Growth Factor by Hierarchical Nanostructured Core-Shell Nanofibers for the Efficient Repair of Critical-Sized Rat Calvarial Defect

Electrospun nanofibers have received much attention as bone tissue-engineered scaffolds for their capacity to mimic the structure of natural extracellular matrix (ECM). Most studies have reproduced nanofibers with smooth surface for tissue engineering. This is quite different from the triple-helical nanotopography of natural collagen nanofibrils. In this study, hierarchical nanostructures were coated on the surface of drug-loaded core-shell nanofibers to mimic natural collagen nanofibrils. The nanoshish-kebab (SK) structure was decorated regularly on the surface of the nanofibers, and the inner-loaded bone morphogenetic protein 2 (BMP2) exhibited a gentle release pattern, similar to a zero-order release pattern in kinetics. The in vitro study also showed that the SK structure could accelerate cell proliferation, attachment, and osteogenic differentiation. Four groups of scaffolds were implanted in vivo to repair critical-sized rat calvarial defects: (1) PCL/PVA (control); (2) SK-PCL/PVA; (3) PCL/PVA-BMP2; and (4) SK-PCL/PVA-BMP2. Much more bone was formed in the SK-PCL/PVA group (24.57 ± 3.81%) than in the control group (1.21 ± 0.23%). The BMP2-loaded core-shell nanofibers with nanopatterned structure (SK-PCL/PVA-BMP2) displayed the best repair efficacy (76.38 ± 4.13%), followed by the PCL/PVA-BMP2 group (39.86 ± 5.74%). It was believed that the hierarchical nanostructured core-shell nanofibers could promote osteogeneration and that the SK structure showed synergistic ability with nanofiber-loaded BMP2 in vivo for bone regeneration. Thus, this BMP2-loaded core-shell nanofiber scaffold with hierarchical nanostructure holds great potential for bone tissue engineering applications.

A hierarchical nanostructural coating of amorphous silicon nitride on polyetheretherketone with antibacterial activity and promoting responses of rBMSCs for orthopedic applications

Silicon nitride (SN) with good osteoconductivity has been introduced as an implantable biomaterial for joint replacement and interbody fusion devices. In this study, SN was coated on a polyetheretherketone (PEEK) surface by inductively coupled plasma-enhanced chemical vapor deposition (ICPECVD). The results showed that a dense coating (thickness of about 500 nm) of amorphous SN was closely combined with a PEEK substrate (PKSN) with a binding strength of 6.88 N. In addition, the coating surface showed hierarchical nanostructures containing many spherical bulges (sizes about 150 nm), which were composed of many small humps (sizes about 10 nm). Moreover, the roughness, hydrophilicity, surface energy, surface charge and adsorption of bovine serum albumin (BSA) of PKSN were obviously higher than those of PEEK. After immersion into simulated body fluid (SBF), the Si ions were gradually released from PKSN into SBF and a weak alkaline environment was created. Antibacterial experiments showed that PKSN exhibited a greater antibacterial activity than that of PEEK. Moreover, compared with PEEK, PKSN significantly promoted adhesion, proliferation, differentiation and expression of osteogenic related genes of the rat bone marrow stromal cells (rBMSCs). In conclusion, the SN coating of PKSN with hierarchical nanostructures exhibited excellent antibacterial activity and cytocompatibility, which would make it a great candidate for orthopedic applications.

Advanced reconfigurable scaffolds fabricated by 4D printing for treating critical-size bone defects of irregular shapes

While scaffold-based tissue engineering has been widely used to treat bone critical-size defects, challenges such as implantation of scaffolds in defects with irregular shapes and implantation of scaffolds through minimally invasive surgery remain in the tissue engineering field. Customized bioactive bone tissue engineering scaffolds with reconfigurable capability for both easy scaffold implantation and perfect shape fitting in irregularly shaped bone defects are therefore needed. Herein, applying 4D printing, photothermal-responsive shape memory bone tissue engineering scaffolds are constructed by incorporating black phosphorus nanosheets and osteogenic peptide into β-tricalcium phosphate/poly(lactic acid-co-trimethylene carbonate) (TCP/P(DLLA-TMC)) nanocomposite scaffolds. When near-infrared irradiation is applied to customized scaffolds on-demand, scaffold temperature rapidly increases to 45 °C, enabling scaffold shape reconfiguration for easy scaffold implantation and precise fitting in irregular bone defects. Once the implantation is finished, scaffold temperature rapidly decreases to 37 °C and scaffolds display mechanical properties comparable to those of human cancellous bone. The improved osteogenesis in bone defect sites is then initiated through pulsed peptide release from scaffolds. Compact integration of reconfigurable scaffolds in rat cranial bone defects and improved new bone formation are demonstrated through micro-computed tomography and histochemical analyses. This study shows a facile method to clinically treat bone defects of irregular shapes.