Preparation of a biomimetic ECM surface on cardiovascular biomaterials via a novel layer-by-layer decellularization for better biocompatibility

Protein adsorption on blood-contacting surfaces: A thermodynamic perspective to guide the design of antithrombogenic polymer coatings

Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. Thrombosis is fundamentally initiated by the nonspecific adsorption of proteins to the material surface, which is strongly governed by thermodynamic factors established by the nature of the interaction between the material surface, surrounding water molecules, and the protein itself. Along these lines, different surface materials (such as polymeric, metallic, ceramic, or composite) induce different entropic and enthalpic changes at the surface-protein interface, with material wettability significantly impacting this behavior. Consequently, protein adsorption on medical devices can be modulated by altering their wettability and surface energy. A plethora of polymeric coating modifications have been utilized for this purpose; hydrophobic modifications may promote or inhibit protein adsorption determined by van der Waals forces, while hydrophilic materials achieve this by mainly relying on hydrogen bonding, or unbalanced/balanced electrostatic interactions. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications. STATEMENT OF SIGNIFICANCE: Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. A plethora of polymeric coating modifications have been utilized for addressing this issue. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications.

Pro-endothelialization of nitinol alloy cardiovascular stents enhanced by the programmed assembly of exosomes and endothelial affinity peptide

Stent implantation is one of the most effective methods for the treatment of atherosclerosis. Nitinol stent is a type of stent with good biocompatibility and relatively mature development; however, it cannot effectively achieve long-term anticoagulation and early endothelialization. In this study, nitinol surfaces with the programmed assembly of heparin, exosomes from endothelial cells, and endothelial affinity peptide (REDV) were fabricated through layer-by-layer assembly technology and click-chemistry, and then exosomes/REDV-modified nitinol interface (ACC-Exo-REDV) was prepared. ACC-Exo-REDV could promote the rapid proliferation and adhesion of endothelial cells and achieve anticoagulant function in the blood. Besides, ACC-Exo-REDV had excellent anti-inflammatory properties and played a positive role in the transformation of macrophage from the pro-inflammatory to anti-inflammatory phenotype. Ex vivo and in vivo experiments demonstrated the effectiveness of ACC-Exo-REDV in preventing thrombosis and hyperplasia formation. Hence, the programmed assembly of exosome interface could contribute to endothelialization and have potential application on the cardiovascular surface modification to prevent stent thrombosis and restenosis.

Human Adipose-Derived Mesenchymal Stem Cell-Secreted Extracellular Matrix Coating on a Woven Nanotextile Vascular Patch for Improved Endothelial Cell Response

Biomedical implants possessing the structural and functional characteristics of extracellular matrix (ECM) are pivotal for vascular applications. This study investigated the potential of recreating a natural ECM-like structural and functional environment on the surface of biodegradable polymeric nanotextiles for vascular implants. Human adipose-derived mesenchymal stem cells (MSCs) were grown on a suitably engineered polycaprolactone (PCL) nanofibrous textile and were allowed to modify its surface through the deposition of MSC-specific ECM. This surface-modified nanotextile showed mechanical characteristics and functionality appropriate for vascular patch material. The uniformity of ECM coating significantly improved the viability, proliferation, and migration of human endothelial cells compared to bare and xenogeneic collagen-coated PCL nanotextile patches. Thus, a polymeric nanotextile, which is surface modified using MSC-driven ECM, provided a rapid and improved endothelialization, thereby suggesting its potential for vascular patch applications.

Exosome-Loaded Pro-efferocytic Vascular Stent with Lp-PLA2-Triggered Release for Preventing In-Stent Restenosis

The efferocytosis defect is regarded as a pivotal event of atherosclerosis. The failure to clear apoptotic cells in atherosclerotic plaques under vascular stents causes a failure to resolve the inflammation underneath. However, efferocytosis repair is still confined to nonstenting therapeutics. Here, we identified a pro-efferocytotic agent and accordingly developed a bioresponsive pro-efferocytotic vascular stent aimed for poststenting healing. Exosomes derived from mesenchymal stem cells were found to be able to regulate efferocytosis via SLC2a1, STAT3/RAC1, and CD300a pathways and modulate foam cell formation processes through a CD36-mediated pathway. Pro-efferocytotic exosomes were encapsulated into liposome-based multivesicular chambers and grafted onto vascular stents. The multivesicular vesicles were able to release exosomes under the Lp-PLA₂ environment. Compared to bare metal stents, exosome-stents in the presence of Lp-PLA₂ enhanced the ratio of apoptotic cell clearance and reduced the neointimal thickness in the mal-efferocytotic rat model. Overall, we identified a pro-efferocytic agent─exosomes that are able to regulate target cells via multiple signaling pathways and are good candidates to serve complex pathological environments, and this bioresponsive pro-efferocytotic vascular stent is an attractive approach for prevention of poststenting complications.

Extracellular Matrix Coatings on Cardiovascular Materials—A Review

Vascular transplantation is an effective and common treatment for cardiovascular disease (CVD). However, the low biocompatibility of implants is a major problem that hinders its clinical application. Surface modification of implants with extracellular matrix (ECM) coatings is an effective approach to improve the biocompatibility of cardiovascular materials. The complete ECM seems to have better biocompatibility, which may give cardiovascular biomaterials a more functional surface. The use of one or several ECM proteins to construct a surface allows customization of coating composition and structure, possibly resulting in some unique functions. ECM is a complex three-dimensional structure composed of a variety of functional biological macromolecules, and changes in the composition will directly affect the function of the coating. Therefore, understanding the chemical composition of the ECM and its interaction with cells is beneficial to provide new approaches for coating surface modification. This article reviews novel ECM coatings, including coatings composed of intact ECM and biomimetic coatings tailored from several ECM proteins, and introduces new advances in coating fabrication. These ECM coatings are effective in improving the biocompatibility of vascular grafts.

Advances in Hyaluronic Acid for Biomedical Applications

Hyaluronic acid (HA) is a large non-sulfated glycosaminoglycan that is the main component of the extracellular matrix (ECM). Because of its strong and diversified functions applied in broad fields, HA has been widely studied and reported previously. The molecular properties of HA and its derivatives, including a wide range of molecular weights but distinct effects on cells, moisture retention and anti-aging, and CD44 targeting, promised its role as a popular participant in tissue engineering, wound healing, cancer treatment, ophthalmology, and cosmetics. In recent years, HA and its derivatives have played an increasingly important role in the aforementioned biomedical fields in the formulation of coatings, nanoparticles, and hydrogels. This article highlights recent efforts in converting HA to smart formulation, such as multifunctional coatings, targeted nanoparticles, or injectable hydrogels, which are used in advanced biomedical application.

Tailoring ZE21B Alloy with Nature-Inspired Extracellular Matrix Secreted by Micro-Patterned Smooth Muscle Cells and Endothelial Cells to Promote Surface Biocompatibility

Delayed surface endothelialization is a bottleneck that restricts the further application of cardiovascular stents. It has been reported that the nature-inspired extracellular matrix (ECM) secreted by the hyaluronic acid (HA) micro-patterned smooth muscle cells (SMC) and endothelial cells (EC) can significantly promote surface endothelialization. However, this ECM coating obtained by decellularized method (dECM) is difficult to obtain directly on the surface of degradable magnesium (Mg) alloy. In this study, the method of obtaining bionic dECM by micro-patterning SMC/EC was further improved, and the nature-inspired ECM was prepared onto the Mg-Zn-Y-Nd (ZE21B) alloy surface by self-assembly. The results showed that the ECM coating not only improved surface endothelialization of ZE21B alloy, but also presented better blood compatibility, anti-hyperplasia, and anti-inflammation functions. The innovation and significance of the study is to overcome the disadvantage of traditional dECM coating and further expand the application of dECM coating to the surface of degradable materials and materials with different shapes.

Recent strategies for improving hemocompatibility and endothelialization of cardiovascular devices and inhibition of intimal hyperplasia

Cardiovascular diseases have become one of the leading causes of mortality worldwide. Stents and artificial grafts have been used to treat cardiovascular diseases. Thrombosis and restenosis seriously impact clinical outcome...

Surface modification of polytetrafluoroethylene (PTFE) with a heparin-immobilized extracellular matrix (ECM) coating for small-diameter vascular grafts applications

Intimal hyperplasia, thrombosis formation, and delayed endothelium regeneration are the main causes that restrict the clinical applications of PTFE small-diameter vascular grafts (inner diameter < 6 mm). An ideal strategy to solve such problems is to facilitate in situ endothelialization. Since the natural vascular endothelium adheres onto the basement membrane, which is a specialized form of extracellular matrix (ECM) secreted by endothelial cells (ECs) and smooth muscle cells (SMCs), functionalizing PTFE with an ECM coating was proposed. However, besides ECs, the ECM-modified PTFE improved SMC growth as well, thereby increasing the risk of intimal hyperplasia. In the present study, heparin was immobilized on the ECM coating at different densities (4.89 ± 1.02 μg/cm2, 7.24 ± 1.56 μg/cm2, 15.63 ± 2.45 μg/cm2, and 26.59 ± 3.48 μg/cm2), aiming to develop a bio-favorable environment that possessed excellent hemocompatibility and selectively inhibited SMC growth while promoting endothelialization. The results indicated that a low heparin density (4.89 ± 1.02 μg/cm2) was not enough to restrict platelet adhesion, whereas a high heparin density (26.59 ± 3.48 μg/cm2) resulted in decreased EC growth and enhanced SMC proliferation. Therefore, a heparin density at 7.24 ± 1.56 μg/cm2 was the optimal level in terms of antithrombogenicity, endothelialization, and SMC inhibition. Collectively, this study proposed a heparin-immobilized ECM coating to modify PTFE, offering a promising means to functionalize biomaterials for developing small-diameter vascular grafts.

Multifunctional natural polymer-based metallic implant surface modifications

High energy traumas could cause critical damage to bone, which will require permanent implants to recover while functionally integrating with the host bone. Critical sized bone defects necessitate the use of bioactive metallic implants. Because of bioinertness, various methods involving surface modifications such as surface treatments, the development of novel alloys, bioceramic/bioglass coatings, and biofunctional molecule grafting have been utilized to effectively integrate metallic implants with a living bone. However, the applications of these methods demonstrated a need for an interphase layer improving bone-making to overcome two major risk factors: aseptic loosening and peri-implantitis. To accomplish a biologically functional bridge with the host to prevent loosening, regenerative cues, osteoimmunomodulatory modifications, and electrochemically resistant layers against corrosion appeared as imperative reinforcements. In addition, interphases carrying antibacterial cargo were proven to be successful against peri-implantitis. In the literature, metallic implant coatings employing natural polymers as the main matrix were presented as bioactive interphases, enabling rapid, robust, and functional osseointegration with the host bone. However, a comprehensive review of natural polymer coatings, bridging and grafting on metallic implants, and their activities has not been reported. In this review, state-of-the-art studies on multifunctional natural polymer-based implant coatings effectively utilized as a bone tissue engineering (BTE) modality are depicted. Protein-based, polysaccharide-based coatings and their combinations to achieve better osseointegration via the formation of an extracellular matrix-like (ECM-like) interphase with gap filling and corrosion resistance abilities are discussed in detail. The hypotheses and results of these studies are examined and criticized, and the potential future prospects of multifunctional coatings are also proposed as final remarks.

Sulfur Contents in Sulfonated Hyaluronic Acid Direct the Cardiovascular Cells Fate

Hyaluronic acid (HA) is recognized as a functional carbohydrate polymer applied for the surface modification of cardiovascular implanted materials due to its molecular weight (MW) dependent cellular regulation. However, due to the enzyme digestion of hyaluronidase on HA in vivo, the stability of HA MW needs to be further improved. It has been reported that the stability of HA MW can be improved by sulfonation. In this study, sulfonated hyaluronic acids (S-HA) with sulfur content of 2.06, 3.69, 7.10, 8.98, and 9.71 were prepared through different sulfuric acid treatment procedures. Cell tests showed that S-HA with higher sulfur content played a significant role in promoting the proliferation and migration of endothelial cells and regulating smooth muscle cells to the physiological phenotype. In addition, it was also proved to inhibit the inflammatory macrophages adhesion/activation. Our data indicates that S-HA may be a better carbohydrate polymer for potential application of cardiovascular biomaterials.

Surface Engineering of Cardiovascular Devices for Improved Hemocompatibility and Rapid Endothelialization

Cardiovascular devices have been widely applied in the clinical treatment of cardiovascular diseases. However, poor hemocompatibility and slow endothelialization on their surface still exist. Numerous surface engineering strategies have mainly sought to modify the device surface through physical, chemical, and biological approaches to improve surface hemocompatibility and endothelialization. The alteration of physical characteristics and pattern topographies brings some hopeful outcomes and plays a notable role in this respect. The chemical and biological approaches can provide potential signs of success in the endothelialization of vascular device surfaces. They usually involve therapeutic drugs, specific peptides, adhesive proteins, antibodies, growth factors and nitric oxide (NO) donors. The gene engineering can enhance the proliferation, growth, and migration of vascular cells, thus boosting the endothelialization. In this review, the surface engineering strategies are highlighted and summarized to improve hemocompatibility and rapid endothelialization on the cardiovascular devices. The potential outlook is also briefly discussed to help guide endothelialization strategies and inspire further innovations. It is hoped that this review can assist with the surface engineering of cardiovascular devices and promote future advancements in this emerging research field.

Recent advances in the design of cardiovascular materials for biomedical applications

Biomaterials dominate the field of cardiovascular therapeutics, a multitude of which have been used to repair and replace injured heart tissue. This field has evolved beyond the simple selection of compatible materials and now focuses on the rational design of controlled structures that integrate with the cardiovascular system. However, the compatibility of these materials with the blood presents a major limitation to their clinical application. In this context, surface modification strategies can enhance blood compatibility and several recent advances in this area have emerged. This review summarizes the recent applications of biomaterials in cardiovascular therapies, the improvements in their biocompatibility and the surface modification technologies that have the potential to improve clinical outcomes.

Preparing a novel magnesium-doped hyaluronan/polyethyleneimine nanoparticle to improve endothelial functionalisation

Nowadays, tissue engineering vascularisation has become an important means of organ repair and treatment of major traumatic diseases. Vascular endothelial layer regeneration and endothelial functionalisation are prerequisites and important components of tissue engineering vascularisation. The present researches of endothelial functionalisation mainly focus on tissue engineering scaffold preparation and implant surface modification. Few studies have reported the interaction of endothelial functionalisation and scaled materials, especially the nanomaterials. Magnesium (Mg), as an essential cytotropic active element in the human body, should promote the growth of endothelial cells. However, the authors' previous work found that the Mg in the alloys had a defect of delayed endothelialisation, which may be attributed to the non-uniform scales of the degradation products from Mg alloys. To validate this hypothesis and fabricate a novel nanomaterial for tissue engineering vascularisation, the authors prepared Mg-doped hyaluronan (HA)/polyethyleneimine (PEI) nanoparticles for endothelial cells testing. Their data showed that the Mg-doped HA/PEI nanoparticle with small scales (diameter <150 nm) presented better ability on improving endothelial cells growth, functionalisation and nitric oxide release.

Enhancing biocompatibility and corrosion resistance of biodegradable Mg-Zn-Y-Nd alloy by preparing PDA/HA coating for potential application of cardiovascular biomaterials

In this paper the poly-dopamine (PDA)/hyaluronic acid (HA) coatings with different HA molecular weight (MW, 4 × 10³, 1 × 10⁵, 5 × 10⁵ and 1 × 10⁶ Da) were prepared onto the NaOH passivated Mg-Zn-Y-Nd alloy aiming at potential application of cardiovascular implants. The characterization of weight loss, polarization curves and surface morphology indicated that the coatings with HA MW of 1 × 10⁵ (PDA/HA-2) and 1 × 10⁶ Da (PDA/HA-4) significantly enhanced the corrosion resistance of Mg-Zn-Y-Nd. In vitro biological test also suggested better hemocompatibility, pro-endothelialization, anti-hyperplasia and anti-inflammation functions of the PDA/HA-2- and PDA/HA-4-coated Mg-Zn-Y-Nd alloy. Nevertheless, the in vivo implantation of SD rats' celiac artery demonstrated that the PDA/HA-2 had preferable corrosion resistance and biocompatibility.

Effects of degradation products of biomedical magnesium alloys on nitric oxide release from vascular endothelial cells

Nitric oxide (NO) released by vascular endothelial cells (VECs), as a functional factor and signal pathway molecule, plays an important role in regulating vasodilation, inhibiting thrombosis, proliferation and inflammation. Therefore, numerous researches have reported the relationship between the NO level in VECs and the cardiovascular biomaterials' structure/functions. In recent years, biomedical magnesium (Mg) alloys have been widely studied and rapidly developed in the cardiovascular stent field for their biodegradable absorption property. However, influence of the Mg alloys' degradation products on VEC NO release is still unclear. In this work, Mg-Zn-Y-Nd, an Mg alloy widely applied on the biodegradable stent research, was investigated on the influence of the degradation time, the concentration and reaction time of degradation products on VEC NO release. The data showed that the degradation product concentration and the reaction time of degradation products had positive correlation with NO release, and the degradation time had negative correlation with NO release. All these influencing factors were controlled by the Mg alloy degradation behaviors. It was anticipated that it might make sense for the cardiovascular Mg alloy design aiming at VEC NO release and therapy.

Preparing Sodium Alginate/Polyethyleneimine Spheres for Potential Application of Killing Tumor Cells by Reducing the Concentration of Copper Ions in the Lesions of Colon Cancer

Inhibition of residual malignant tumors in patients with colon cancer after operation is one of the difficulties in rehabilitation treatment. At present, using biocompatible materials to remove the copper ion which is the growth dependence of malignant tumors in the lesion site is considered to be the frontier means to solve this problem. In this work, we developed a sodium alginate (SA)/polyethyleneimine (PEI) hydrogel sphere via cross-linking method (SA/SP/SA; SP = SA/PEI) as an oral biomaterial for adsorbing and removing copper ions from colon cancer lesions. The evaluated results showed that the SA/PEI/SA (SPS) hydrogel sphere obtained the largest swelling rate at pH 8.3 which was the acid-base value of colon microenvironment and absorbed more copper ions compared with the SA control. The cell experiment presented that the SPS hydrogel sphere owned better compatibility on normal fibroblasts and promoted higher death of colon cancer cells compared with SA/PEI (SP) and SA control. Our data suggested that the SA/PEI hydrogel sphere had the potentiality as an oral biomaterial for inhibiting colon cancer cells.

Nature-inspired extracellular matrix coating produced by micro-patterned smooth muscle and endothelial cells endows cardiovascular materials with better biocompatibility

Functionalizing cardiovascular biomaterials with an extracellular matrix (ECM) via in vitro decellularization has been applied as an effective method to improve the biocompatibility of implants.