Osteoblast response to zirconia modified-ORMOSILs

Novel PVA-Hyaluronan-Siloxane Hybrid Nanofiber Mats for Bone Tissue Engineering

Hyaluronan (HA) is a natural biodegradable biopolymer; its biological functions include cell adhesion, cell proliferation, and differentiation as well as decreasing inflammation, angiogenesis, and regeneration of damaged tissue. This makes it a suitable candidate for fabricating nanomaterials with potential use in tissue engineering. However, HA nanofiber production is restricted due to the high viscosity, low evaporation rate, and high surface tension of HA solutions. Here, hybrids in the form of continuous and randomly aligned polyvinyl alcohol (PVA)-(HA)-siloxane nanofibers were obtained using an electrospinning process. PVA-HA fibers were crosslinked by a 3D siloxane organic-inorganic matrix via sol-gel that restricts natural hydrophilicity and stiffens the structure. The hybrid nanofiber mats were characterized by FT-IR, micro-Raman spectroscopy, SEM, and biological properties. The PVA/HA ratio influenced the morphology of the hybrid nanofibers. Nanofibers with high PVA content (10PVA-8 and 10PVA-10) form mats with few beaded nanofibers, while those with high HA content (5PVA-8 and 5PVA-10) exhibit mats with mound patterns formed by "ribbon-like" nanofibers. The hybrid nanofibers were used as mats to support osteoblast growth, and they showed outstanding biological properties supporting cell adhesion, cell proliferation, and cell differentiation. Importantly, the 5PVA-8 mats show 3D spherical osteoblast morphology; this suggests the formation of tissue growth. These novel HA-based nanomaterials represent a relevant advance in designing nanofibers with unique properties for potential tissue regeneration.

MC design and FIB preparation of a YSZ biochemical material microstructure

Aiming at the difficulty of traditional machining of Y2O3-ZrO2 (YSZ) inert ceramic materials, a different method using focused ion beam to selectively create nanoscale microscale structures on the surface of materials was proposed. The sputtering yield, surface damage, and the energy loss of YSZ materials was investigated using the SRIM software using the Monte Carlo method. It is shown that the sputtering yield increases with ion energy in the range 0-30 keV, reaching a maximum of 9.4 atoms/ion at 30 keV. At an ion beam voltage of 30 keV, the most severe damage to the material is 8 mm on the surface. At the same time, the main forms of energy loss in the treatment are phonon energy loss and ionization energy loss, of which phonon energy loss due to the recoil atoms is the largest. In addition, we continue to perform focused ion beam processing experiments on YSZ materials, combining previous MC modeling to optimize different operating conditions such as ion beam, voltage and processing mode. The optimized processing parameters are 30 keV and 2.5 nA. It is shown that the quality of the deep grooves gradually improves with decreasing ion beam current at the same ion beam voltage. However, an excessively small ion beam current leads to an excessively large depth of the deep grooves and lengthy processing times.

Advancing dental implants: Bioactive and therapeutic modifications of zirconia

Zirconium-based implants have gained popularity in the dental implant field owing to their corrosion resistance and biocompatibility, attributed to the formation of a native zirconia (ZrO₂) film. However, enhanced bioactivity and local therapy from such implants are desirable to enable the earlier establishment and improved long-term maintenance of implant integration, especially in compromised patient conditions. As a result, surface modification of zirconium-based implants have been performed using various physical, chemical and biological techniques at the macro-, micro-, and nano-scales. In this extensive review, we discuss and detail the development of Zr implants covering the spectrum from past and present advancements to future perspectives, arriving at the next generation of highly bioactive and therapeutic nano-engineered Zr-based implants. The review provides in-depth knowledge of the bioactive/therapeutic value of surface modification of Zr implants in dental implant applications focusing on clinical translation.

Cellular Response to Sol-Gel Hybrid Materials Releasing Boron and Calcium Ions

Poly(dimethylsiloxane) (PDMS)-SiO₂-CaO-based hybrid materials prepared by sol-gel have proved to be very promising materials for tissue engineering applications and drug-delivery systems. These hybrids are biocompatible and present osteogenic and bioactive properties supporting osteoblast attachment and bone growth. The incorporation of therapeutic elements in these materials, such as boron (B) and calcium (Ca), was considered in this study as an approach to develop biomaterials capable of stimulating bone regeneration. The main purpose of this work was thus to produce, by sol-gel, bioactive and biocompatible hybrid materials of the PDMS-SiO₂-B₂O₃-CaO system, capable of a controlled Ca and B release. Different compositions with different boron amounts were prepared using the same precursors resulting in different monolithic materials, with distinct structures and microstructures. Structural features were assessed by Fourier transform infrared (FT-IR) spectrometry and solid-state nuclear magnetic resonance (NMR) techniques, which confirmed the presence of hybrid bonds (Si-O-Si) between organic (PDMS) and inorganic phase (tetraethyl orthosilicate (TEOS)), as well as borosiloxane bonds (B-O-Si). From the ¹¹B NMR results, it was found that Ca changes the boron coordination, from trigonal (BO₃) to tetrahedral (BO₄). Scanning electron microscopy (SEM) micrographs and N₂ isotherms showed that the incorporation of boron modifies the material's microstructure by increasing the macroporosity and decreasing the specific surface area (SSA). In vitro tests in simulated body fluid (SBF) showed the precipitation of a calcium phosphate layer on the material surface and the controlled release of therapeutic ions. The cytocompatibility of the prepared hybrids was studied with bone marrow stromal cells (ST-2 cell line) by analyzing the cell viability and cell density. The results demonstrated that increasing the dilution rate of extraction medium from the hybrids leads to improved cell behavior. The relationship between the in vitro response and the structural and microstructural features of the materials was explored. It was shown that the release of calcium and boron ions, determined by the hybrid structure was crucial for the observed cells behavior. Although not completely understood, the encouraging results obtained constitute an incentive for further studies on this topic.