Superparamagnetic electrospun microrods for magnetically-guided pulmonary drug delivery with magnetic heating

Parameterisation and cellular evaluation of poly(ethylene) oxide-coated erbium oxide in MCF-7 cells as MRI diagnostic nanofibres

The novelty of this work is the conjugation of poly(ethylene) oxide (PEO) with the erbium oxide (Er₂O₃) nanoparticles using the electrospinning technique. In this work, synthesised PEO-coated Er₂O₃ nanofibres were characterised and evaluated for their cytotoxicity to assess their potential use as diagnostic nanofibres for magnetic resonance imaging (MRI). PEO has significantly impacted nanoparticle conductivity due to its lower ionic conductivity at room temperature. The findings showed that the surface roughness was improved over the nanofiller loading, implying an improvement in cell attachment. The release profile performed for drug-controlling purposes has demonstrated a stable release after 30 min. Cellular response in MCF-7 cells showed high biocompatibility of the synthesised nanofibres. The cytotoxicity assay results showed that the diagnostic nanofibres had excellent biocompatibility, indicating the feasibility for diagnosis purposes. With excellent contrast performance, the PEO-coated Er₂O₃ nanofibres developed novel T₂ and T₁-T₂ dual-mode MRI diagnostic nanofibres leading to better cancer diagnosis. In conclusion, this work has demonstrated that the conjugation of PEO-coated Er₂O₃ nanofibres improved the surface modification of the Er₂O₃ nanoparticles as a potential diagnostic agent. Using PEO in this study as a carrier or polymer matrix significantly influenced the biocompatibility and internalisation efficiency of the Er₂O₃ nanoparticles without triggering any morphological changes after treatment. This work has suggested permissible concentrations of PEO-coated Er₂O₃ nanofibres for diagnostic uses.

Micro/Nanosystems for Magnetic Targeted Delivery of Bioagents

Targeted delivery of pharmaceuticals is promising for efficient disease treatment and reduction in adverse effects. Nano or microstructured magnetic materials with strong magnetic momentum can be noninvasively controlled via magnetic forces within living beings. These magnetic carriers open perspectives in controlling the delivery of different types of bioagents in humans, including small molecules, nucleic acids, and cells. In the present review, we describe different types of magnetic carriers that can serve as drug delivery platforms, and we show different ways to apply them to magnetic targeted delivery of bioagents. We discuss the magnetic guidance of nano/microsystems or labeled cells upon injection into the systemic circulation or in the tissue; we then highlight emergent applications in tissue engineering, and finally, we show how magnetic targeting can integrate with imaging technologies that serve to assist drug delivery.

Preparation of ethyl cellulose particles with different morphologies through microfluidics

The sizes and shapes of polymer particles determine their performance and application. In this paper, ethyl cellulose particles with different morphologies are generated through extraction and solidification in a microfluidic device with double T-junctions. Droplets of ethyl acetate containing ethyl cellulose are formed first, then, pure water is employed to extract the solvents in the droplets and the ethyl cellulose is solidified to form monodisperse particles. By changing the flow rates of the continuous phase and the dispersed phase and the concentration of ethyl cellulose, red-blood-cell-like, doughnut-like, dimpled and spherical particles are fabricated, and the regime of different particle morphologies is given. The more important is that the physical mechanisms and explanations of the formation of different particle morphologies are clearly disclosed by analyzing the circulation flows outside and inside the droplets. The flow patterns in the microchannel, and the diffusion and solidification properties of the molecules are the key factors that affect the final morphology of particles. Due to the circulation, there are two stagnation points at the front and rear of the droplet, and they are the approximate locations where the dimple in the dimpled particle, the hole in the doughnut-like particle and the two pits in the red-blood-cell-like particles are formed. These analysis and results are useful in flow chemistry, in the fabrication of particle materials, and so on.

PEGylated green halloysite/spinel ferrite nanocomposites for pH sensitive delivery of dexamethasone: A potential pulmonary drug delivery treatment option for COVID-19

Dexamethasone (Dex) is used in drug regimen for treatment of Coronavirus disease (COVID-19). Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) fusion and entry into the cell occurs at pH 5.5. In our present study, we have identified a green, cheap clay based halloysite (Hal) nanoformulation with release capability of Dex at such interactive pH condition. 30%ZnFe₂O₄/Hal and 30%NiFe₂O₄/Hal were prepared by one-pot synthesis technique. Dex (5% wt/wt) was functionalized over both nanocomposites. Finally, polyethylene glycol (PEG) was coated over ZnFe₂O₄/Hal/Dex and NiFe₂O₄/Hal/Dex nanocomposite using lyophilization technique (0.08 μl/mg of nanocarrier). The release ability of Dex was studied under pulmonary infection and normal pH conditions (pH = 5.6 and 7.4). The characterization study using X-ray diffraction (XRD) and UV-visible diffuse reflectance (DRS) spectra confirmed the presence of spinel ferrites over Hal. Nitrogen adsorption isotherm showed the surface area of ZnFe₂O₄/Hal (75 m²/g), pore volume (0.27 cm³/g) with average pore size (14.5 nm). Scanning electron microscope/Energy dispersive spectroscopy (SEM-EDS) and Transmission electron microscopy analysis revealed a textural change in halloysite tubular type indicating drug adsorption and PEG adhesion. DRS spectra indicated an intergrowth of zinc ferrite nanoparticles on the halloysite nanotubes. Interestingly, ZnFe₂O₄/Hal/Dex/PEG exhibited a high Dex release ability (17.5%, 168 h) at pH = 5.6 relevant to SARS-CoV-2 fusion entry into the cell pH condition of 5.5. Comparatively, the nanocomposite showed a less Dex release (<5%) release for 168 h at neutral pH = 7.4. The drug release kinetics were studied and the obtained data were fitted for the release constant and release exponent, using the Korsmeyer-Peppas model. To test the compatibility of our nanocomposites, we performed the cell viability assay (MTT) using HEK293 cells. Our results showed that at 0.3 mg/ml, Dex-loaded nanocomposite had a statistically significant improvement in cell viability compared to Dex alone. These results suggest that our nanocomposite has prevented the toxic effect of Dex and has huge potential to act as pulmonary drug delivery system for targeted lung infection therapeutics.

Multifunctional Electrospun Nanofibers Based on Biopolymer Blends and Magnetic Tubular Halloysite for Medical Applications

Tubular halloysite (HNT) is a naturally occurring aluminosilicate clay with a unique combination of natural availability, good biocompatibility, high mechanical strength, and functionality. This study explored the effects of magnetically responsive halloysite (MHNT) on the structure, morphology, chemical composition, and magnetic and mechanical properties of electrospun nanofibers based on polycaprolactone (PCL) and gelatine (Gel) blends. MHNT was prepared via a simple modification of HNT with a perchloric-acid-stabilized magnetic fluid–methanol mixture. PCL/Gel nanofibers containing 6, 9, and 12 wt.% HNT and MHNT were prepared via an electrospinning process, respecting the essential rules for medical applications. The structure and properties of the prepared nanofibers were studied using infrared spectroscopy (ATR-FTIR) and electron microscopy (SEM, STEM) along with energy-dispersive X-ray spectroscopy (EDX), magnetometry, and mechanical analysis. It was found that the incorporation of the studied concentrations of MHNT into PCL/Gel nanofibers led to soft magnetic biocompatible materials with a saturation magnetization of 0.67 emu/g and coercivity of 15 Oe for nanofibers with 12 wt.% MHNT. Moreover, by applying both HNT and MHNT, an improvement of the nanofibers structure was observed, together with strong reinforcing effects. The greatest improvement was observed for nanofibers containing 9 wt.% MHNT when increases in tensile strength reached more than two-fold and the elongation at break reached a five-fold improvement.