Dual role of tannic acid and pyrogallol incorporated in plaster of Paris: Morphology modification and release for antimicrobial properties

3D-printing of alginate/gelatin scaffold loading tannic acid@ZIF-8 for wound healing: In vitro and in vivo studies

In the present study, ZIF-8 metal-organic framework (MOF) modified with Tannic acid (TA@ZIF-8) was synthesized and impregnated in alginate-gelatin (Alg-Gel) hydrogel. The Alg-Gel scaffolds containing 0, 5, and 10 % of TA@ZIF-8 were fabricated through the 3D printing method specifically denoted as Alg-Gel 0 %, Alg-Gel 5 %, and Alg-Gel 10 %. XRD, FTIR, FESEM, and EDX physically and chemically characterized the synthesized ZIF-8 and TA@ZIF-8 MOFs. Besides, Alg-Gel containing TA@ZIF-8 prepared scaffolds and their biological activity were also evaluated. SEM images verified the nano-size formation of MOFs. Improved swelling and decreased degradation rates after adding TA@ZIF-8 were also reported. Increased compression strength from 0.628 to 1.63 MPa in Alg-Gel 0 % and Alg-Gel 10 %, respectively, and a 2.19 increase in elastic modulus in Alg-Gel 10 % scaffolds were exhibited. Biological activity of scaffolds, including Live-dead and Cell adhesion, antibacterial, in-vivo, and immunohistochemistry assays, demonstrated desirable fibroblast cell proliferation and adhesion, increased bacterial growth inhibition zone, accelerated wound closure and improved expression of anti-inflammatory cytokines in Alg-Gel 10 % scaffolds. The findings of this study confirm that Alg-Gel 10 % scaffolds promote full-thickness wound healing and could be considered a potential candidate for full-thickness wound treatment purposes.

Plant molecules reinforce bone repair: Novel insights into phenol-modified bone tissue engineering scaffolds for the treatment of bone defects

Bone defects have become a major cause of disability and death. To overcome the limitations of natural bone implants, including donor shortages and immune rejection risks, bone tissue engineering (BTE) scaffolds have emerged as a promising therapy for bone defects. Despite possessing good biocompatibility, these metal, ceramic and polymer-based scaffolds are still challenged by the harsh conditions in bone defect sites. ROS accumulation, bacterial infection, excessive inflammation, compromised blood supply deficiency and tumor recurrence negatively impact bone tissue cells (BTCs) and hinder the osteointegration of BTE scaffolds. Phenolic compounds, derived from plants and fruits, have gained growing application in treating inflammatory, infectious and aging-related diseases due to their antioxidant ability conferred by phenolic hydroxyl groups. The prevalent interactions between phenols and functional groups also facilitate their utilization in fabricating scaffolds. Consequently, phenols are increasingly incorporated into BTE scaffolds to boost therapeutic efficacy in bone defect. This review demonstrated the effects of phenols on BTCs and bone defect microenvironment, summarized the intrinsic mechanisms, presented the advances in phenol-modified BTE scaffolds and analyzed their potential risks in practical applications. Overall, phenol-modified BTE scaffolds hold great potential for repairing bone defects, offering novel patterns for BTE scaffold construction and advancing traumatological medicine.

Do the Mechanical Properties of Calcium-Silicate-Based Cements Influence the Stress Distribution of Different Retrograde Cavity Preparations?

The aim of the present study was to investigate the influence of the mechanical properties of three different calcium-silicate-based cements on the stress distribution of three different retrograde cavity preparations. Biodentine™ "BD", MTA Biorep "BR", and Well-Root™ PT "WR" were used. The compression strengths of ten cylindrical samples of each material were tested. The porosity of each cement was investigated by using micro-computed X-ray tomography. Finite element analysis (FEA) was used to simulate three retrograde conical cavity preparations with an apical diameter of 1 mm (Tip I), 1.4 mm (Tip II), and 1.8 mm (Tip III) after an apical 3 mm resection. BR demonstrated the lowest compression strength values (17.6 ± 5.5 MPa) and porosity percentages (0.57 ± 0.14%) compared to BD (80 ± 17 MPa-1.22 ± 0.31%) and WR (90 ± 22 MPa-1.93 ± 0.12%) (p < 0.05). FEA demonstrated that the larger cavity preparation demonstrated higher stress distribution in the root whereas stiffer cement demonstrated lower stress in the root but higher stress in the material. We can conclude that a respected root end preparation associated with cement with good stiffness could offer optimal endodontic microsurgery. Further studies are needed to define the adapted cavity diameter and cement stiffness in order to have optimal mechanical resistance with less stress distribution in the root.

Physicochemical and Mechanical Properties of Premixed Calcium Silicate and Resin Sealers

The aim of the present in vitro study was to evaluate specific mechanical and physicochemical properties of two calcium silicate based sealers, (AH Plus Bioceramic “AHPB”; Well-Root ST “WRST”), and a conventional resin sealer (AH Plus “AHP”). These aims were accomplished by assessing the porosity, pH, compression strength, roughness, wettability and cell attachment of the tested materials. The results were compared statistically using the one-way ANOVA test. Higher pH values were obtained in both AHPB and WRST compared to AHP at 3, 24 and 72 h (p < 0.05). A greater level of porosity and wettability was detected for both AHPB and WRST compared to the resin sealer AHP (p < 0.05). Evident cell growth characterized by elongated morphology was observed on the surface of AHPB and WRST, while only a thin layer of cells was seen on the surface of AHP. A significant lower compression strength and modulus were obtained in the specimens created using AHPB compared to those made with AHP and WRST (p < 0.05). The removal of calcium silicates may be quite tricky during endodontic retreatment. In conclusion, considering the limitations of the present in vitro study, both calcium silicate sealers demonstrated good physicochemical properties. However, the lower compression strength and modulus of AHPB may facilitate its removal and make the retreatment procedures considerably easier.

Physicochemical and Antibacterial Properties of Bioactive Retrograde Filling Materials

The purpose of the present study was to evaluate the physicochemical properties and antibacterial activity of three calcium silicate cements. Mineral trioxide aggregate (MTA Biorep “BR”), Biodentine (BD) and Well-Root PT (WR) materials were investigated using scanning electron microscopy (SEM) at 24, 72 and 168 h of immersion in phosphate buffered saline (PBS). The antibacterial activity against Enterococcus faecalis (E. faecalis), the solubility, roughness, pH changes and water contact angle were also analyzed. All results were statistically analyzed using a one-way analysis of variance test. Statistically significant lower pH was detected for BD than WR and BR (p < 0.05). No statistical difference was found among the three materials for the efficacy of kill against E. faecalis (p > 0.05). Good antibacterial activity was observed (kill 50% of bacteria) after 24 h of contact. The wettability and the roughness of BR were higher than for the other cements (p < 0.05). BD was more soluble than WR and BR (p < 0.05). In conclusion, the use of bioceramic cements as retrograde materials may play an important role in controlling bacterial growth and in the development of calcium phosphate surface layer to support healing. Moreover, the premixed cement was easier to use than powder−liquid cement.

Physicochemical and Antibacterial Properties of Conventional and Two Premixed Root Canal Filling Materials in Primary Teeth

In this study, some physicochemical and antibacterial properties of three root canal filling materials for primary teeth, Calplus “CP” (Prevest DenPro, Lewes, DE, USA), Bio-C Pulpecto “Bio-CP” (Angelus, Basil, Londrina, Paraná, Brazil), and Zinc Oxide and Eugenol “ZOE” (Prevest DenPro, Lewes, DE, USA) were compared. For each material, the pH, solubility, contact angle, and crystalline microstructure under SEM were evaluated. Their antibacterial activity against Enterococcus faecalis was determined through direct tests. The Kruskal−Wallis test was used to analyze the results using a one-way analysis of variance on ranks. All the materials had an alkaline pH at 3, 24, and 72 h, with CalPlus having the highest (p < 0.05). Bio-CP was more soluble during the evaluation period (24 h) than ZOE and CalPlus (p < 0.05). Bio-CP and ZOE demonstrated the creation of crystallite structures on their surfaces after immersion in PBS at 37 °C, whereas CalPlus showed none. The lowest contact angle was observed for Bio-CP (53 ± 1.5°); contact angles of (86 ± 4°) and (96 ± 1°), respectively, were observed after 10 s of the deposition of the water drop for CalPlus and ZOE. In conclusion, according to this study, there is still a need to develop new filling materials for primary teeth. ZOE, CalPlus and Bio-CP demonstrated different physicochemical and antibacterial properties, but none of the materials had optimal properties and could be considered the most suitable filling material for primary teeth pulpectomy. Bioceramics in their current state are not an alternative. The physicochemical and antibacterial properties still need improvement to fit the intricate anatomy of primary teeth.

An agar-polyvinyl alcohol hydrogel loaded with tannic acid with efficient hemostatic and antibacterial capacity for wound dressing

Rapid hemostasis, antibacterial effect and promotion of wound healing are the most important functions that wound dressings need to have. In this work, we designed and prepared a hydrogel with antibacterial effect, hemostatic ability and wound healing promotion using agar, polyvinyl alcohol (PVA) and tannic acid (TA). We performed a series of tests to characterize the structure and properties of AGAR@PVA-TA hydrogels. The results showed that the AGAR@PVA-TA hydrogels had good mechanical properties and excellent antibacterial ability as well as good hemocompatibility. The cytotoxicity results showed that the AGAR@PVA-TA hydrogels had good cytocompatibility. And the TA loaded hydrogels also presented some good performances in animal studies. In the liver hemostasis model, the AGAR@PVA-TA hydrogel showed good hemostatic ability. Also, the AGAR@PVA-TA hydrogel was able to promote wound healing in an S. aureus-infected rat wound model. More importantly, our research results demonstrated that compared to other polyphenols (such as proanthocyanidins), TA could better improve the mechanical properties, antibacterial ability and rapid hemostasis of hydrogels, which illustrated the uniqueness of TA. Therefore, the TA loaded hydrogel (AGAR@PVA-TA hydrogel) has the potential to be applied as a wound dressing.

Chemistry and Bioactivity of Microsorum scolopendria (Polypodiaceae): Antioxidant Effects on an Epithelial Damage Model

Microsorum scolopendia (MS), which grows on the Chilean island of Rapa Nui, is a medicinal fern used to treat several diseases. Despite being widely used, this fern has not been deeply investigated. The aim of this study was to perform a characterization of the polyphenolic and flavonoid identity, radical scavenging, antimicrobial, and anti-inflammatory properties of MS rhizome and leaf extracts (RAE and HAE). The compound identity was analyzed through the reversed-phase high-performance liquid chromatography (RP-HPLC) method coupled with mass spectrometry. The radical scavenging and anti-inflammatory activities were evaluated for DPPH, ORAC, ROS formation, and COX inhibition activity assay. The antimicrobial properties were evaluated using an infection model on Human Dermal Fibroblast adult (HDFa) cell lines incubated with Staphylococcus aureus and Staphylococcus epidermidis. The most abundant compounds were phenolic acids between 46% to 57% in rhizome and leaf extracts, respectively; followed by flavonoids such as protocatechic acid 4-O-glucoside, cirsimaritin, and isoxanthohumol, among others. MS extract inhibited and disaggregated the biofilm bacterial formed and showed an anti-inflammatory selective property against COX-2 enzyme. RAE generated a 64% reduction of ROS formation in the presence of S. aureus and 87.35% less ROS in the presence of S. epidermidis on HDFa cells. MS has great therapeutic potential and possesses several biological properties that should be evaluated.

Effectiveness of Three Agents in Pulpotomy Treatment of Permanent Molars with Incomplete Root Development: A Randomized Controlled Trial

The aim of this study was to investigate and compare, radiographically and clinically, the impacts of calcium-silicate based-cement (CSBC), nano-hydroxyapatite and platelet-rich fibrin (PRF) as pulpotomy agents in permanent immature molars with incomplete root development. Sixty-three participants (63 permanent immature molars) were included in this study. The patients were randomly divided into three equal groups. Fast setting MTA (MM-MTA), nano-hydroxyapatite and platelet-rich fibrin were used as pulpotomy agents. The teeth were evaluated clinically and radiographically after 6 and 12 months by two blinded examiners. Apical closure and pulp canal obliteration percentages were recorded. The in vitro reaction of the tested materials after a 7-day immersion period of the different materials in phosphate-buffered solution was analyzed using scanning electron microscopy to associate the in vitro mineralization with in vivo pulp canal obliteration percentages. Data were analyzed using Chi-square and ANOVA tests (α = 0.05). No significant difference was found between the three tested groups in terms of clinical and radiographic success (p > 0.05). All cases demonstrated evidence of root growth, including complete apical closure or continued apical closure. At 12 months, complete apical closure was found among the MM-MTA group (50%), nano-hydroxyapatite group (55%) and platelet-rich fibrin group (60%) (p > 0.05). After 12 months, pulp canal obliteration was more observed in the MM-MTA and nano-hydroxyapatite groups than in the PRF group (p < 0.05). MM-MTA (auto-mixed), NHA (hand-mixed) and PRF (autologous) could be used as pulpotomy agents since they exhibit comparable high clinical and radiographic success rates. However, the fact that the groups managed with MM-MTA and NHA have a higher tendency to canal obliteration might indicate that PRF should be considered the first choice material as pulpotomy agent, as it would make retreatment considerably easier.

Impacts of Resveratrol and Pyrogallol on Physicochemical, Mechanical and Biological Properties of Epoxy-Resin Sealers

This study aimed at evaluating the physicochemical and biological properties of experimental epoxy-resin sealers containing polyphenols such as resveratrol and pyrogallol. A conventional epoxy resin (OB) was modified by adding different concentrations of resveratrol (RS) or pyrogallol (PY) to its composition. Antibacterial and antioxidant activities, mechanical properties, along with wettability and morphological changes were investigated. The results were statistically analyzed using ANOVA and multiple comparison tests (α = 0.05). The incorporation of the tested polyphenols into the epoxy resin enhanced its mechanical properties. PY demonstrated much better antioxidant and antibacterial activities than RS, which were associated with a higher release of PY. In contrast, PY showed a higher cytotoxicity than OB and OB doped with RS. OB containing PY presented a rougher surface and higher water absorption than OB doped with RS. Both tested polyphenols caused no notable changes to the overall porosity of OB. Resveratrol and pyrogallol may not only influence the morphology and mechanical properties of epoxy-resin sealers, but could also enhance antioxidant activity and antibacterial effects against Enterococcus faecalis. Most epoxy-resin sealers currently available in the market can be considered as “passive” materials. Thus, doping their composition with specific polyphenols may be a suitable strategy to confer some antibacterial properties, antioxidant potential, along with improvement of some mechanical properties.

Antibacterial ability and osteogenic activity of polyphenols-tailored calcium silicate bone cement

Calcium silicate-based cement (CSC) has attracted much interest because of its favourable osteogenic effect supporting its clinical use. Despite CSC has antibacterial activity, this activity still needs to be improved...