Infectious Disease: Connecting Innate Immunity to Biocidal Polymers

Highly Adhesive and Self-Healing Zwitterionic Hydrogels as Antibacterial Coatings for Medical Devices

Bacterial infection of medical devices has caused incalculable losses to maintenance costs and health care. A single coating with antibacterial function cannot guarantee the long-term use of the device, because the coating will be damaged and fall off during reuse. To solve this problem, the development of coatings with high adhesion and self-healing ability is a wise direction. In this paper, a multifunctional polyzwitterionic antibacterial hydrogel coating (PZG) composed of amphozwitterion monomer, anionic monomer, and quaternary ammonium cationic monomer was synthesized by dipping UV photoinitiated polymerization. The structure of PZGs was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. Ascribing to the hydrogel internal electrostatic interaction, hydrogen bond, and cation-π interaction, the obtained PZGs exhibited high ductility (>1200% strain) and appropriate strength (>189 kPa). Remarkably, PZGs could also adhere firmly on different substrates through noncovalent interaction, and their adhesion could be controlled by adjusting the amount of zwitterionic. Reversible physical interactions in polymer networks endowed hydrogels with excellent self-healing properties. In addition, PZGs exhibit good antibacterial activity and biocompatibility due to the synergistic effect of quaternary ammonium cation and amphozwitterion monomer. This work provides a multifunctional antibacterial coating for medical equipment and has broad application prospects in the biomedical field.

Synthesis, Anti-Bacterial and Molecular Docking Studies of Arylated Butyl 2-Bromoisonicotinate Against Clinical Isolates of ESBL-Producing Escherichia coli ST405 and Methicillin-Resistant Staphylococcus aureus

Introduction

Global public health concerns include the emergence and spread of methicillin-resistant Staphylococcus aureus (MRSA) and extended-spectrum beta-lactamase Escherichia coli (ESBL-E. coli). These pathogens cause infections that are difficult to treat, which can have fatal outcomes and require lengthy hospital stays. As a result, we created butyl 2-bromoisonicotinate and tested its antibacterial effectiveness against the ESBL-E. coli ST 405 and MRSA pathogens. Natural product discovery is complemented by synthetic compound synthesis because of the latter's potential for superior characteristics, target specificity, scalability, intellectual advantages, and chemical diversity. Because of this, the potential for discovering new medicinal compounds is increased, and the constraints placed on natural sources are overcome. Natural items are tough to obtain since they are hard to isolate and synthesize. Therefore, modern science is actively searching for small molecules as therapeutic agents by applying sustainable techniques that can be commercialized.

Methods

Two patients' blood samples were taken, and the BACTEC/Alert system was used to process them. On blood and MacConkey agar, the positive samples were subcultured and incubated aerobically at 37 °C. Using the VITEK 2 compact system, the isolates were subjected to isolate identification and MIC. MLST of the ESBL-E. coli was performed by PCR. Additionally, Fischer esterification was used to create butyl 2-bromoisonicotinate in excellent yields. A commercially available palladium catalyst was then used to arylate the compound, resulting in medium to good yields of arylated butyl 2-bromoisonicotinates. Using the agar well diffusion assay and the micro-broth dilution method, we assessed the in-vitro activities of the synthesized molecules (3, 5a-h) against clinically isolated ESBL-E. coli ST405, and MRSA. A molecular operating environment was used to carry out in silico validation of the synthesized compounds' binding to the active site and to evaluate the stability of their molecular interactions with the target E. coli 2Y2T protein.

Results

MRSA and ESBL-producing E. coli were identified as the two clinical isolates. While MRSA was also resistant to beta-lactam drugs and least resistant to vancomycin, ESBL-producing E. coli belonged to ST405 and was resistant to cephalosporins and sensitive to carbapenems. Good yields of the desired compounds were produced by our effective and economical synthesis. By using a micro-broth dilution assay, the Molecules (3, 5a, and 5d) were most effective against both resistant strains. The Molecules (3, 5a, 5b, and 5d) also displayed good binding energies.

Conclusion

The butyl 2-bromoisonicotinate displayed antibacterial efficacy against ESBL-producing E. coli ST405 and MRSA strains. After the in-vivo trial, this substance might offer an alternative therapeutic option.

Recent Development of Polyhydroxyalkanoates (PHA)-Based Materials for Antibacterial Applications: A Review

The diseases caused by microorganisms are innumerable existing on this planet. Nevertheless, increasing antimicrobial resistance has become an urgent global challenge. Thus, in recent decades, bactericidal materials have been considered promising candidates to combat bacterial pathogens. Recently, polyhydroxyalkanoates (PHAs) have been used as green and biodegradable materials in various promising alternative applications, especially in healthcare for antiviral or antiviral purposes. However, it lacks a systematic review of the recent application of this emerging material for antibacterial applications. Therefore, the ultimate goal of this review is to provide a critical review of the state of the art recent development of PHA biopolymers in terms of cutting-edge production technologies as well as promising application fields. In addition, special attention was given to collecting scientific information on antibacterial agents that can potentially be incorporated into PHA materials for biological and durable antimicrobial protection. Furthermore, the current research gaps are declared, and future research perspectives are proposed to better understand the properties of these biopolymers as well as their possible applications.

Puerarin@Chitosan composite for infected bone repair through mimicking the bio-functions of antimicrobial peptides

It is important to eliminate lipopolysaccharide (LPS) along with killing bacteria in periprosthetic joint infection (PJI) therapy for promoting bone repair due to its effect to regulate macrophages response. Although natural antimicrobial peptides (AMPs) offer a good solution, the unknown toxicity, high cost and exogenetic immune response hamper their applications in clinic. In this work, we fabricated a nanowire-like composite material, named P@C, by combining chitosan and puerarin via solid-phase reaction, which can finely mimic the bio-functions of AMPs. Chitosan, serving as the bacteria membrane puncture agent, and puerarin, serving as the LPS target agent, synergistically destroy the bacterial membrane structure and inhibit its recovery, thus endowing P@C with good antibacterial property. In addition, P@C possesses good osteoimmunomodulation due to its ability of LPS elimination and macrophage differentiation modulation. The in vivo results show that P@C can inhibit the LPS induced bone destruction in the Escherichia coli infected rat. P@C exhibits superior bone regeneration in Escherichia coli infected rat due to the comprehensive functions of its superior antibacterial property, and its ability of LPS elimination and immunomodulation. P@C can well mimic the functions of AMPs, which provides a novel and effective method for treating the PJI in clinic.

•

P@C was fabricated through solid reaction with chitosan and puerarin.

•

P@C punctures bacteria membrane and eliminates LPS, thus sterilizes bacteria.

•

P@C improves bone formation of PEEK under infection via polarizing macrophage to M2.

Birch Tar Introduced into Polylactide and Its Influence on the Barrier, Thermal, Functional and Biological Properties of the Film Obtained by Industrial Extrusion

The aim of the study was to evaluate possibility of producing a polylactide film with birch tar by the industrial extrusion method and whether the addition of 10% birch tar can ensure adequate biocidal properties of PLA against pathogenic microorganisms (E. coli, S. aureus, P. aeruginosa, A. tumefaciens, X. campestris, P. brassicacearum, P. corrugate and P. syringae) and fungi (A. niger, A. flavus and A. versicolor) while ensuring beneficial functional properties, such as water vapor, nitrogen, oxygen and carbon dioxide permeability, which are of considerable importance in the packaging industry. The main test methods used were ISO 22196, ISO 846, ISO 2556, ASTM F 1927 and ASTM F 2476-20. The obtained results prove the possibility of extruding polymer films with a biocidal additive, i.e., birch tar, and obtaining favorable properties that qualify the produced film for applications in the packaging industry.

Polydopamine-Based Nanoparticles for an Antibiofilm Platform: Influence of Size and Surface Charge on Their Penetration and Accumulation in S. aureus Biofilms

Various functional polydopamine (PDA) nanoparticles have been developed to treat biofilms in recent years; however, in-depth knowledge of how the physicochemical properties of the nanoparticles impact their penetration and accumulation in biofilms is lacking. In this work, PDA nanoparticles of 15, 60, 90, and 200 nm sizes were synthesized and carboxyl, methoxy, and amine groups were introduced to the particle surface to control their surface charges, and then the penetration and accumulation of these PDA nanoparticles in S. aureus biofilms were investigated. The PDA nanoparticles of approximately 60 nm size (PDA60) showed higher penetration and accumulation abilities than nanoparticles of other sizes, and the positively charged amine groups introduced onto the surfaces of PDA60 nanoparticles were more effective than carboxyl or methoxy groups in promoting the interactions of the nanoparticles with the biofilm. The PDA60 nanoparticles with amine surface groups exhibited good photothermal properties, and confocal laser scanning microscopy revealed that they were able to accumulate in the biofilm in significant amounts, which upon irradiation with a laser of 808 nm wavelength showed a high bactericidal rate (97.1%) against the biofilm. The findings of this work provide guidance for the design and development of nanoparticles for antibiofilm application.

Synthesis, Characterization and Broad-Spectrum Bactericidal Effects of Ammonium Methyl and Ammonium Ethyl Styrene-Based Nanoparticles

Untreatable infections, growing healthcare costs, and increasing human mortality due to the rising resistance of bacteria to most of the available antibiotics are global phenomena that urgently require the discovery of new and effective antimicrobial agents. Cationic macromolecules, acting as membrane disruptors, are widely studied, and several compounds, including two styrene-based copolymers developed by us (P5 and P7), have proved to possess potent broad-spectrum antibacterial effects, regardless of the resistance profiles of the bacteria. Here, we first reported the synthesis and physicochemical characterization of new cationic nanoparticles (NPs) (CP1 and OP2), obtained by polymerizing the monomers 4-ammoniummethylstyrene (4-AMSTY) and 4-ammoniumethylstyrene (4-AESTY) hydrochlorides, whose structures were designed using the cationic monomers of P5 and P7 as template compounds. The antibacterial activity of CP1 and OP2 was assessed against several Gram-positive and Gram-negative multi-drug resistant (MDR) pathogens, observing potent antibacterial effects for both CP1 (MICs = 0.1-0.8 µM) and OP2 (MICs = 0.35-2.8 µM) against most of the tested isolates. Additionally, time-killing studies carried out with CP1 and OP2 on different strains of the most clinically relevant MDR species demonstrated that they kill pathogens rapidly. Due to their interesting physicochemical characteristics, which could enable their mutual formulation as hydrogels, CP1 and OP2 could represent promising ingredients for the development of novel antibacterial dosage forms for topical applications, capable of overcoming severe infections sustained by bacteria resistant to the presently available antibiotics.

Synthesis of Functionalized N-(4-Bromophenyl)furan-2-carboxamides via Suzuki-Miyaura Cross-Coupling: Anti-Bacterial Activities against Clinically Isolated Drug Resistant A. baumannii, K. pneumoniae, E. cloacae and MRSA and Its Validation via a Computational Approach

N-(4-bromophenyl)furan-2-carboxamide (3) was synthesized by the reaction furan-2-carbonyl chloride (1) and 4-bromoaniline (2) in the presence of Et₃N in excellent yields of 94%. The carboxamide (3) was arylated by employing triphenylphosphine palladium as a catalyst and K₃PO₄ as a base to afford N-(4-bromophenyl)furan-2-carboxamide analogues (5a-i) in moderate to good yields (43–83%). Furthermore, we investigated the in vitro anti-bacterial activities of the respective compounds against clinically isolated drug-resistant bacteria A. baumannii, K. pneumoniae, E. cloacae and S. aureus. The molecule (3) was found to be the most effective activity against these bacteria, particularly NDM-positive bacteria A. baumannii as compared to various commercially available drugs. Docking studies and MD simulations further validated it, expressing the active site and molecular interaction stability.

Enhanced Antibacterial Activity of a Cationic Macromolecule by Its Complexation with a Weakly Active Pyrazole Derivative

Molecules containing the pyrazole nucleus are widely reported as promising candidates to develop new antimicrobial compounds against multidrug-resistant (MDR) bacteria, where available antibiotics may fail. Recently, aiming at improving the too-high minimum inhibitory concentrations (MICs) of a pyrazole hydrochloride salt (CB1H), CB1H-loaded nanoparticles (CB1H-P7 NPs) were developed using a potent cationic bactericidal macromolecule (P7) as polymer matrix. Here, CB1H-P7 NPs have been successfully tested on several clinical isolates of Gram-positive and Gram-negative species, including relevant MDR strains. CB1H-P7 NPs displayed very low MICs (0.6–4.8 µM), often two-fold lower than those of P7, on 34 out of 36 isolates tested. Upon complexation, the antibacterial effects of pristine CB1H were improved by 2–16.4-fold, and, unexpectedly, also the already potent antibacterial effects of P7 were 2–8 times improved against most of bacteria tested when complexed with CB1H. Time-killing experiments performed on selected species established that CB1H-P7 NPs were bactericidal against Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa. Selectivity indices values up to 2.4, determined by cytotoxicity experiments on human keratinocytes, suggested that CB1H-P7 NPs could be promising for counteracting serious infections sustained by most of the isolates tested in this study.

Antibacterial Mechanism of N-PMI and the Characteristics of PMMA-Co-N-PMI Copolymer

Aiming at the excellent killing effect of N-phenylmaleimide (N-PMI) on microorganisms, this article used structural simulation analysis, fluorescence analysis, confocal laser scanning microscope and SEM to find that the double bond in N-PMI could interact with the sulfur groups in the membrane protein, changing its conformation, rupturing the plasma membrane of the cell, leaking the contents, and ultimately causing the death of the microorganisms. Therefore, once the double bond participated in the polymerization, N-PMI lost its antimicrobial function. N-PMI could achieve azeotropic copolymerization with MMA through reactive extrusion polymerization. N-PMI with a content of 5 % can be evenly inserted into the PMMA chain segment during the copolymerization reaction, thereby increasing the Tg of pure PMMA by up to 15 °C, which provided the PMMA-co-PMI copolymer with resistance to boiling water sterilization advantageous conditions. In addition, N-PMI with a content of 5 % has little effect on the transparency of PMMA after participating in the copolymerization. Moreover, the trace amount of residual N-PMI made the material have excellent antimicrobial function, and the bacteriostatic zone is extremely small, which provided an excellent guarantee for the safety and durability of the material. As a medical biological material, the PMMA-co-PMI copolymer has a good industrialization application prospects.

Quaternized Polysaccharide-Based Cationic Micelles as a Macromolecular Approach to Eradicate Multidrug-Resistant Bacterial Infections while Mitigating Antimicrobial Resistance

Microbial infections and microbial resistance lead to a high demand for new antimicrobial agents. Quaternized polysaccharides are cationic antimicrobial candidates; however, the limitation of homogeneous synthesis solvents that affect the molecular structure and biological activities, as well as their drug resistance remains unclear. Therefore, the authors homogeneously synthesize a series of quaternized chitin (QC) and quaternized chitosan (QCS) derivatives via a green and effective KOH/urea system and investigate their structure-activity relationship and biological activity in vivo and in vitro. Their study reveals that a proper match of degree of quaternization (DQ) and degree of deacetylation (DD') of QC or QCS is key to balance antimicrobial property and cytotoxicity. They identify QCS-2 as the optimized antimicrobial agent with a DQ of 0.46 and DD' of 82%, which exhibits effective broad-spectrum antimicrobial properties, good hemocompatibility, excellent cytocompatibility, and effective inhibition of bacterial biofilm formation and eradication of mature bacterial biofilms. Moreover, QCS-2 exhibits a low propensity for development of drug resistance and significant anti-infective effects on MRSA in vivo comparable to that of vancomycin, avoiding excessive inflammation and promoting the formation of new blood vessels, hair follicles, and collagen deposition to thus expedite wound healing.

Comparable Studies on Nanoscale Antibacterial Polymer Coatings Based on Different Coating Procedures

The antibacterial activity of different antibiotic and metal-free thin polymer coatings was investigated. The films comprised quaternary ammonium compounds (QAC) based on a vinyl benzyl chloride (VBC) building block. Two monomeric QAC of different alkyl chain lengths were prepared, and then polymerized by two different polymerization processes to apply them onto Ti surfaces. At first, the polymeric layer was generated directly on the surface by atom transfer radical polymerization (ATRP). For comparison purposes, in a classical route a copolymerization of the QAC-containing monomers with a metal adhesion mediating phosphonate (VBPOH) monomers was carried out and the Ti surfaces were coated via drop coating. The different coatings were characterized by X-ray photoelectron spectroscopy (XPS) illustrating a thickness in the nanomolecular range. The cytocompatibility in vitro was confirmed by both live/dead and WST-1 assay. The antimicrobial activity was evaluated by two different assays (CFU and BTG, resp.,), showing for both coating processes similar results to kill bacteria on contact. These antibacterial coatings present a simple method to protect metallic devices against microbial contamination.

The ability of carbon nanoparticles to increase transmembrane current of cations coincides with impaired synaptic neurotransmission

Here, carbon nanodots synthesized from β-alanine (Ala-CDs) and detonation nanodiamonds (NDs) were assessed using (1) radiolabeled excitatory neurotransmitters L-[¹⁴C]glutamate, D-[2,3³H]aspartate, and inhibitory ones [³H]GABA, [³H]glycine for registration of their extracellular concentrations in rat cortex nerve terminals; (2) the fluorescent ratiometric probe NR12S and pH-sensitive probe acridine orange for registration of the membrane lipid order and synaptic vesicle acidification, respectively; (3) suspended bilayer lipid membrane (BLM) to monitor changes in transmembrane current. In nerve terminals, Ala-CDs and NDs increased the extracellular concentrations of neurotransmitters and decreased acidification of synaptic vesicles, whereas have not changed sufficiently the lipid order of membrane. Both nanoparticles, Ala-CDs and NDs, were capable of increasing the conductance of the BLM by inducing stable potential-dependent cation-selective pores. Introduction of divalent cations, Zn²⁺ or Cd²⁺ on the particles` application side (cis-side) increased the rate of Ala-CDs pore-formation in the BLM. The application of positive potential (+100 mV) to the cis-chamber with Ala-CDs or NDs also activated the insertion as compared with the negative potential (-100 mV). The Ala-CD pores exhibited a wide-range distribution of conductances between 10 and 60 pS and consecutive increase in conductance of each major peak by ~10 pS, which suggest the clustering of the same basic ion-conductive structure. NDs also formed ion-conductive pores ranging from 6 pS to 60 pS with the major peak of conductance at ~12 pS in cholesterol-containing membrane. Observed Ala-CDs and NDs-induced increase in transmembrane current coincides with disturbance of excitatory and inhibitory neurotransmitter transport in nerve terminals.

Polymers as advanced antibacterial and antibiofilm agents for direct and combination therapies

The growing prevalence of antimicrobial drug resistance in pathogenic bacteria is a critical threat to global health. Conventional antibiotics still play a crucial role in treating bacterial infections, but the emergence and spread of antibiotic-resistant micro-organisms are rapidly eroding their usefulness. Cationic polymers, which target bacterial membranes, are thought to be the last frontier in antibacterial development. This class of molecules possesses several advantages including a low propensity for emergence of resistance and rapid bactericidal effect. This review surveys the structure-activity of advanced antimicrobial cationic polymers, including poly(α-amino acids), β-peptides, polycarbonates, star polymers and main-chain cationic polymers, with low toxicity and high selectivity to potentially become useful for real applications. Their uses as potentiating adjuvants to overcome bacterial membrane-related resistance mechanisms and as antibiofilm agents are also covered. The review is intended to provide valuable information for design and development of cationic polymers as antimicrobial and antibiofilm agents for translational applications.

Mechanical, antibacterial, biocompatible and microleakage evaluation of glass ionomer cement modified by nanohydroxyapatite/polyhexamethylene biguanide

This study aims to look for the best concentration of nanohydroxyapatite (NHA) and polyhexamethylene biguanide (PHMB) incorporated into glass ionomer cement (GIC) in accordance with ISO:9917-1 and evaluate its mechanical, antibacterial, biocompatible and microleakages properties. NHA was incorporated into Fuji Ⅱ GIC powder at 0-8.00 wt% concentration and specimens were prepared; the best concentration was sifted out according to ISO9917-1. Based on best NHA proportion, 0-0.80% PHMB was dispersed into powder and samples were respectively prepared. Mechanical properties include net setting time (ST), compressive strength (CS), microhardness (VNH), solubility and scanning electron microscopy (SEM) observation. Those met ISO standard were qualified to continue microleakage observation, antibacterial activity, and biocompatibility test. The results suggested that GIC/6%NHA/0.2% PHMB and GIC/6%NHA/0.4%PHMB showed great performances in mechanical, antibacterial, and microleakage improvements, and the cytotoxicity of modified GIC showed no statistical difference with pure GIC.

Macromolecular Nanotherapeutics and Antibiotic Adjuvants to Tackle Bacterial and Fungal Infections

The escalating rise in the population of multidrug-resistant (MDR) pathogens coupled with their biofilm forming ability has struck the global health as nightmare. Alongwith the threat of aforementioned menace, the sluggish development of new antibiotics and the continuous deterioration of the antibiotic pipeline has stimulated the scientific community toward the search of smart and innovative alternatives. In near future, membrane targeting antimicrobial polymers, inspired from antimicrobial peptides, can stand out significantly to combat against the MDR superbugs. Many of these amphiphilic polymers can form nanoaggregates through self-assembly with superior and selective antimicrobial efficacy. Additionally, these macromolecular nanoaggregrates can be utilized to engineer smart antibiotic-delivery system for on-demand drug-release, exploiting the infection site's micoenvironment. This strategy substantially increases the local concentration of antibiotics and reduces the associated off-target toxicity. Furthermore, amphiphilc macromolecules can be utilized to rejuvinate obsolete antibiotics to tackle the drug-resistant infections. This review article highlights the recent developments in macromolecular architecture to design numerous nanostructures with broad-spectrum antimicrobial activity, their application in fabricating smart drug delivery systems and their efficacy as antibiotic adjuvants to circumvent antimicrobial resistance. Finally, the current challenges and future prospects are briefly discussed for further exploration and their practical application in clinical settings.

Bactericidal and Fungistatic Properties of LDPE Modified with a Biocide Containing Metal Nanoparticles

The aim of this study was to ascertain whether the combined action of metal nanoparticles (silver, copper, zinc oxide, iron oxide) would ensure the appropriate biocidal properties oflow-density polyethylene (LDPE) against pathogenic microorganisms. According to the research hypothesis, appropriately selected concentrations of the applied metal nanoparticles allow for a high level of biocidal activity of polymeric materials against both model and pathogenic bacterial strains (Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Legionella pneumophila, Salmonella enterica subsp. enterica) and fungi (Aspergillus brasiliensis, Saccharomyces cerevisiae, Candida albicans, Penicilium expansum), whilst ensuring the safety of use due to the lack of migration of particles to the surrounding environment. Studies have shown that adding 4% of a biocide containing Ag, Cu, ZnO, and Fe₂O₃ nanoparticles is the most optimal solution to reduce the number of S. aureus, S. enterica and P. aeruginosa by over 99%. The lowest effectiveness was observed against L. pneumophila bacteria. As for E. coli, a higher biocide content did not significantly increase the antibacterial activity. The results showed a high efficiency of the applied biocide at a concentration of 2% against fungal strains. The high efficiency of the obtained biocidal results was influenced by the uniform dispersion of nanoparticles in the material and their low degree of agglomeration. Furthermore, a slight migration of components to the environment is the basis for further research in the field of the application of the developed materials in industry.

Curcumin-loaded high internal phase emulsions stabilized with lysine modified lignin: a biological agent with high photothermal protection and antibacterial properties

Bacterial infections and multidrug resistance can seriously endanger the health and lives of humans, therefore the development of novel and efficient antibacterial strategies and drugs is urgently needed. Herein, a series of highly biocompatible lysine modified enzymatic hydrolysis lignins (EHL-Lys-x) were synthesized using the Mannich reaction. The sterilizing efficiency of EHL-Lys-2.0 against S. aureus and E. coli at 20 mg mL^-1 is 93% and 50%, respectively, which is 26% higher than pure EHL. Quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM) analysis showed that the adsorption and adhesive force between EHL-Lys-x and bacteria increase with the increased amount of grafting of Lys on EHL owing to the increase of the electrostatic interaction between the EHL-Lys-x and bacteria, which results in an improvement in the antimicrobial activity of EHL-Lys-x. Subsequently, EHL-Lys-x combined with alkyl polyglucoside (APG) was used to stabilize the high internal phase emulsion containing curcumin (HIPEs-cur). The dispersed phase fraction of HIPE-cur is 87 vol%, which is the highest internal phase reported to date in the medical research area. The highest residual levels of curcumin in HIPEs are 60-fold, 3-fold and 5-fold compared to that in bulk oil after treatment with UV radiation, thermal emittance and after storage, respectively. The minimum inhibitory concentrations of HIPEs-cur against S. aureus and E. coli were found to be 1.56 and 6.25 mg mL^-1, respectively, which are far higher than that of pure EHL-Lys-x. This strategy not only increases the chemical stability and bioavailability of curcumin, but also provides a novel method for the application of lignin in biomedical science.

Reviews on mechanisms of in vitro antioxidant, antibacterial and anticancer activities of water-soluble plant polysaccharides

Degenerative diseases such as cancer and cardiovascular diseases, and antimicrobial resistance are becoming prominent health problems needing utmost public health attention. Curative interventions such as the use of pharmaceutical drugs and alternative plant medicines are increasingly being explored. Plant polysaccharides have gained attention for their promising bioactivities such as antioxidant, antimicrobial and anticancer activities. Bioactive plant polysaccharides are also being preferred for their relatively few side effects compared to conventional pharmaceuticals. The elucidation of the bioactive potential of plant polysaccharides in disease treatment entails an understanding of the factors that determine their biofunctional properties using functional and mechanistic assays. This review summarizes the literature on the composition, structural, functional, and mechanistic determinations of the antioxidant, anticancer and antimicrobial activities of plant polysaccharides. The outcome of this review highlights the leading trends in the elucidation of the antioxidant, anticancer and antimicrobial activities of plant polysaccharides and underscores the promising health benefits of plant polysaccharides.

Broad-Spectrum Bactericidal Activity of a Synthetic Random Copolymer Based on 2-Methoxy-6-(4-Vinylbenzyloxy)-Benzylammonium Hydrochloride

Low-molecular-weight organic ammonium salts exert excellent antimicrobial effects by interacting lethally with bacterial membranes. Unfortunately, short-term functionality and high toxicity limit their clinical application. On the contrary, the equivalent macromolecular ammonium salts, derived from the polymerization of monomeric ammonium salts, have demonstrated improved antibacterial potency, a lower tendency to develop resistance, higher stability, long-term activity, and reduced toxicity. A water-soluble non-quaternary copolymeric ammonium salt (P7) was herein synthetized by copolymerizing 2-methoxy-6-(4-vinylbenzyloxy)-benzylammonium hydrochloride monomer with N, N-di-methyl-acrylamide. The antibacterial activity of P7 was assessed against several multidrug-resistant (MDR) clinical isolates of both Gram-positive and Gram-negative species. Except for colistin-resistant Pseudomonas aeruginosa, most isolates were susceptible to P7, also including some Gram-negative bacteria with a modified charge in the external membrane. P7 showed remarkable antibacterial activity against isolates of Enterococcus, Staphylococcus, Acinetobacter, and Pseudomonas, and on different strains of Escherichia coli and Stenotrophomonas maltophylia, regardless of their antibiotic resistance. The lowest minimal inhibitory concentrations (MICs) observed were 0.6-1.2 µM and the minimal bactericidal concentrations (MBC) were frequently overlapping with the MICs. In 24-h time-kill and turbidimetric studies, P7 displayed a rapid non-lytic bactericidal activity. P7 could therefore represent a novel and potent tool capable of counteracting infections sustained by several bacteria that are resistant to the presently available antibiotics.

Eradication of Intracellular Salmonella Typhimurium by Polyplexes of Acid-Transforming Chitosan and Fragment DNA

Antibiotics are highly successful against microbial infections. However, current challenges include rising antibiotic resistance rates and limited efficacy against intracellular pathogens. A novel form of a nanomaterial-based antimicrobial agent is investigated for efficient treatment of an intracellular Salmonella enterica sv Typhimurium infection. A known antimicrobial polysaccharide, chitosan, is engineered to be readily soluble under neutral aqueous conditions for systemic administration. The modified biologic, named acid-transforming chitosan (ATC), transforms into an insoluble, antimicrobial compound in the mildly acidic intracellular compartment. In cell culture experiments, ATC is confirmed to have antimicrobial activity against intracellular S. Typhimurium in a concentration- and pH-dependent manner, without affecting the host cells, RAW264.7 macrophages. For improved cellular uptake and pharmacokinetic/pharmacodynamic properties, ATC is further complexed with fragment DNA (fDNA), to form nano-sized spherical polyplexes. The resulting ATC/fDNA polyplexes efficiently eradicated S. Typhimurium from RAW264.7 macrophages. ATC/fDNA polyplexes may bind with microbial wall and membrane components. Consistent with this expectation, transposon insertion sequencing of a complex random mutant S. Typhimurium library incubated with ATC does not reveal specific genomic target regions of the antimicrobial. This study demonstrates the utility of a molecularly engineered nanomaterial as an efficient and safe antimicrobial agent, particularly against an intracellular pathogen.

Synthesis of Polystyrene-Based Cationic Nanomaterials with Pro-Oxidant Cytotoxic Activity on Etoposide-Resistant Neuroblastoma Cells

Drug resistance is a multifactorial phenomenon that limits the action of antibiotics and chemotherapeutics. Therefore, it is essential to develop new therapeutic strategies capable of inducing cytotoxic effects circumventing chemoresistance. In this regard, the employment of natural and synthetic cationic peptides and polymers has given satisfactory results both in microbiology, as antibacterial agents, but also in the oncological field, resulting in effective treatment against several tumors, including neuroblastoma (NB). To this end, two polystyrene-based copolymers (P5, P7), containing primary ammonium groups, were herein synthetized and tested on etoposide-sensitive (HTLA-230) and etoposide-resistant (HTLA-ER) NB cells. Both copolymers were water-soluble and showed a positive surface charge due to nitrogen atoms, which resulted in protonation in the whole physiological pH range. Furthermore, P5 and P7 exhibited stability in solution, excellent buffer capacity, and nanosized particles, and they were able to reduce NB cell viability in a concentration-dependent way. Interestingly, a significant increase in reactive oxygen species (ROS) production was observed in both NB cell populations treated with P5 or P7, establishing for both copolymers an unequivocal correlation between cytotoxicity and ROS generation. Therefore, P5 and P7 could be promising template macromolecules for the development of new chemotherapeutic agents able to fight NB chemoresistance.

Synthesis, Characterization, and Bactericidal Activity of a 4-Ammoniumbuthylstyrene-Based Random Copolymer

The growing resistance of bacteria to current chemotherapy is a global concern that urgently requires new and effective antimicrobial agents, aimed at curing untreatable infection, reducing unacceptable healthcare costs and human mortality. Cationic polymers, that mimic antimicrobial cationic peptides, represent promising broad-spectrum agents, being less susceptible to develop resistance than low molecular weight antibiotics. We, thus, designed, and herein report, the synthesis and physicochemical characterization of a water-soluble cationic copolymer (P5), obtained by copolymerizing the laboratory-made monomer 4-ammoniumbuthylstyrene hydrochloride with di-methyl-acrylamide as uncharged diluent. The antibacterial activity of P5 was assessed against several multi-drug-resistant clinical isolates of both Gram-positive and Gram-negative species. Except for strains characterized by modifications of the membrane charge, most of the tested isolates were sensible to the new molecule. P5 showed remarkable antibacterial activity against several isolates of genera Enterococcus, Staphylococcus, Pseudomonas, Klebsiella, and against Escherichia coli, Acinetobacter baumannii and Stenotrophomonas maltophilia, displaying a minimum MIC value of 3.15 µM. In time-killing and turbidimetric studies, P5 displayed a rapid non-lytic bactericidal activity. Due to its water-solubility and wide bactericidal spectrum, P5 could represent a promising novel agent capable of overcoming severe infections sustained by bacteria resistant the presently available antibiotics.

Synthesis of antibacterial polyether biguanide curing agent and its cured antibacterial epoxy resin

At present, bacteria continue to threaten human health, and the resistance of bacteria to antibiotics continues to increase, so the development of new antibacterial agents and antibacterial materials is increasingly important to ensure human health. In this paper, three polyether biguanide compounds with high antibacterial properties were synthesized by reacting polyetheramine T403 with o-tolylbiguanide, m-tolylbiguanide and p-tolylbiguanide (o-TTB, m-TTB and p-TTB), respectively. The antimicrobial performance of polyether biguanide against E. coli and S. aureus was evaluated using a minimum inhibitory concentration method, and the results showed that the synthesized polyether biguanide exhibited efficient and broad-spectrum antimicrobial effects. Among them, o-tolyl biguanide derivative o-TTB showed the best antimicrobial performance, with minimum inhibitory concentrations of 20 and 15 μg/mL against E. coli and S. aureus, respectively. Then, epoxy resin E51 was cured using the obtained TTB as a curing agent to prepare an epoxy resin with antibacterial properties. The inhibition of the growth of S. aureus by the cured o-TTB/E51 resin was investigated by incubating the cured epoxy resin with bacteria, and the results showed that the cured resin had a significant inhibitory effect on the growth of bacteria. The non-isothermal curing kinetics of the o-TTB/E51 system were investigated by differential scanning calorimetry (DSC) to determine the optimized curing reaction temperature, curing kinetic parameters and curing kinetics equation.

Robust Copper Metal-Organic Framework-Embedded Polysiloxanes for Biomedical Applications: Its Antibacterial Effects on MRSA and In Vitro Cytotoxicity

Polysiloxanes (PSs) have been widely utilized in the industry as lubricants, varnishes, paints, release agents, adhesives, and insulators. In addition, their applications have been expanded to include the development of new biomedical materials. To modify PS for application in therapeutic purposes, a flexible antibacterial Cu-MOF (metal-organic framework) consisting of glutarate and 1,2-bis(4-pyridyl)ethane ligands was embedded in PS via a hydrosilylation reaction of vinyl-terminated and H-terminated PSs at 25 °C. The bactericidal activities of the resulting Cu-MOF-embedded PS (PS@Cu-MOF) and the control polymer (PS) were tested against Escherichia coli, Staphylococcus aureus, and methicillin-resistant Staphylococcus aureus. PS@Cu-MOF exhibited more than 80% bactericidal activity toward the tested bacteria at a concentration of 100 μg⋅mL-1 and exhibited a negligible cytotoxicity toward mouse embryonic fibroblasts at the same concentration. Release tests of the Cu(II) ion showed PS@Cu-MOF to be particularly stable in a phosphate-buffered saline solution. Furthermore, its physical and thermal properties, including the phase transition, rheological measurements, swelling ratio, and thermogravimetric profile loss, were similar to those of the control polymer. Moreover, the low cytotoxicity and bactericidal activities of PS@Cu-MOF render it a promising candidate for use in medicinal applications, such as in implants, skin-disease treatment, wound healing, and drug delivery.

Advances of peptides for antibacterial applications

In the past few decades, peptide antibacterial products with unique antibacterial mechanisms have attracted widespread interest. They can effectively reduce the probability of drug resistance of bacteria and are biocompatible, so they possess tremendous development prospects. This review provides recent research and analysis on the basic types of antimicrobial peptides (including poly (amino acid)s, short AMPs, and lipopeptides) and factors to optimize antimicrobial effects. It also summarizes the two most important modes of action of antimicrobial peptides and the latest developments in the application of AMPs, including antimicrobial agent, wound healing, preservative, antibacterial coating and others. Finally, we discuss the remaining challenges to improve the antibacterial peptides and propose prospects in the field.

A comprehensive review on antimicrobial face masks: an emerging weapon in fighting pandemics

The world has witnessed several incidents of epidemics and pandemics since the beginning of human existence. The gruesome effects of microbial threats create considerable repercussions on the healthcare systems. The continually evolving nature of causative viruses due to mutation or re-assortment sometimes makes existing medicines and vaccines inactive. As a rapid response to such outbreaks, much emphasis has been placed on personal protective equipment (PPE), especially face mask, to prevent infectious diseases from airborne pathogens. Wearing face masks in public reduce disease transmission and creates a sense of community solidarity in collectively fighting the pandemic. However, excessive use of single-use polymer-based face masks can pose a significant challenge to the environment and is increasingly evident in the ongoing COVID-19 pandemic. On the contrary, face masks with inherent antimicrobial properties can help in real-time deactivation of microorganisms enabling multiple-use and reduces secondary infections. Given the advantages, several efforts are made incorporating natural and synthetic antimicrobial agents (AMA) to produce face mask with enhanced safety, and the literature about such efforts are summarised. The review also discusses the literature concerning the current and future market potential and environmental impacts of face masks. Among the AMA tested, metal and metal-oxide based materials are more popular and relatively matured technology. However, the repeated use of such a face mask may pose a danger to the user and environment due to leaching/detachment of nanoparticles. So careful consideration is required to select AMA and their incorporation methods to reduce their leaching and environmental impacts. Also, systematic studies are required to establish short-term and long-term benefits.

Hidden complexity in membrane permeabilization behavior of antimicrobial polycations

There are diverse membrane permeabilization behaviors of antimicrobial polycations in zwitterionic or charged vesicles; different mechanisms may occur over time.

Antimicrobial and degradable triazolinedione (TAD) crosslinked polypeptide hydrogels

Hydrogels are perfectly suited to support cell and tissue growth in advanced tissue engineering applications as well as classical wound treatment scenarios. Ideal hydrogel materials for these applications should be easy to produce, biocompatible, resorbable and antimicrobial. Here we report the fabrication of degradable covalent antimicrobial lysine and tryptophan containing copolypeptide hydrogels, whereby the hydrogel properties can be independently modulated by the copolypeptide monomer ratio and chiral composition. Well-defined statistical copolypeptides comprising different overall molecular weights as well as ratios of l- and d-lysine and tryptophan at ratios of 35 : 15, 70 : 30 and 80 : 20 were obtained by N-carboxyanhydride (NCA) polymerisation and subsequently crosslinked by the selective reaction of bifunctional triazolinedione (TAD) with tryptophan. Real-time rheology was used to monitor the crosslinking reaction recording the fastest increase and overall modulus for copolypeptides with the higher tryptophan ratio. Water uptake of cylindrical hydrogel samples was dependent on crosslinking ratio but found independent of chiral composition, while enzymatic degradation proceeded significantly faster for samples containing more l-amino acids. Antimicrobial activity on a range of hydrogels containing different polypeptide chain lengths, lysine/tryptophan composition and l/d enantiomers was tested against reference laboratory strains of Gram-negative Escherichia coli (E. coli; ATCC25922) and Gram-positive, Staphylococcus aureus (S. aureus; ATCC25923). log reductions of 2.8-3.4 were recorded for the most potent hydrogels. In vitro leachable cytotoxicity tests confirmed non-cytotoxicity as per ISO guidelines.

MM, Aldalbahi AK, Thamer BM, Mahmoud YAG, El-Hamshary H. Biocidal Polymers: Synthesis, Characterization and Antimicrobial Activity of Bis-Quaternary Onium Salts of Poly(aspartate-co-succinimide)

Microbial multidrug resistance presents a real problem to human health. Therefore, water-soluble polymers based on poly(aspartate-co-succinimide) were synthesized via reaction of poly(aspartate-co-succinimide) with bis-quaternary ammonium or quaternary salts. The resultant copolymers were characterized by various techniques such as FTIR, TGA, ¹HNMR, ¹³CNMR and elemental microanalysis. Antimicrobial activities of the new onium salts were investigated against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Salmonella typhi, and the fungi; Candida albicans,Aspergillus niger, Cryptococcus neoformans and Aspergillus flavus by agar diffusion method. Antimicrobial activity was studied in terms of inhibition zone diameters, in addition to the estimation of minimal inhibitory concentration (MIC) of the prepared compounds. A. niger and E. coli were the most affected microorganisms among the tested microorganisms with an inhibition zone of 19-21 (mm) in case of biocides, (V) and (VII). The obtained results showed that the quaternary onium salts have higher activity compared to the aspartate copolymer with MIC concentrations of 25 mg/mL for (VII) and (V) and 50 mg/mL for (VI) and (IV).

The Mechanisms and the Applications of Antibacterial Polymers in Surface Modification on Medical Devices

Medical device contamination caused by microbial pathogens such as bacteria and fungi has posed a severe threat to the patients' health in hospitals. Due to the increasing resistance of pathogens to antibiotics, the efficacy of traditional antibiotics treatment is gradually decreasing for the infection treatment. Therefore, it is urgent to develop new antibacterial drugs to meet clinical or civilian needs. Antibacterial polymers have attracted the interests of researchers due to their unique bactericidal mechanism and excellent antibacterial effect. This article reviews the mechanism and advantages of antimicrobial polymers and the consideration for their translation. Their applications and advances in medical device surface coating were also reviewed. The information will provide a valuable reference to design and develop antibacterial devices that are resistant to pathogenic infections.

Antibacterial properties of main-chain cationic polymers prepared through amine-epoxy 'Click' polymerization

Poly(β-hydroxyl amine)s are prepared through an amine-epoxy 'click' polymerization process in water under ambient conditions. These materials could be subjected to a post-polymerization protonation/alkylation reaction at the nitrogen atom to yield quaternary ammonium salts in the polymer backbone. The antimicrobial activities indicated that polymers carrying butyl chains at the nitrogen atom are effective towards Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), as only 10-20 μg mL-1 polymer concentrations are required to inhibit the bacterial growth by >90%. One of the candidates was also found to be effective towards Mycobacterium smegmatis (M. smegmatis) - a model organism to develop drugs against rapidly spreading tuberculosis (TB) infections. The hemolysis assay indicated that a majority of antimicrobial agents did not disrupt red blood cell membranes. The mechanistic studies suggested that cell wall disruption by the cationic polymers was the likely cause of bacterial death.

Structural characterization and catalytic sterilization performance of a TiO2 nano-photocatalyst

In view of the food safety and hygiene issues caused by pathogenic microorganisms, tetrabutyl titanate was used as a precursor for the preparation of a TiO2 nano-semiconductor photocatalyst via the sol-gel process. The plate count method was then adopted to investigate the photocatalytic sterilization performance of the synthesized TiO2 nanoparticles toward Escherichia coli, Staphylococcus aureus, and Candida albicans. Subsequently, a backpropagation (BP) neural network model was developed to predict the photocatalytic sterilization performance. The photocatalyst was structurally characterized by the Brunauer-Emmett-Teller method for specific surface area determination, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The results indicated that the prepared TiO2 nano-photocatalyst was of high purity with a specific surface area of 76.5 m2/g and the particle size range 15-18 nm. The nanoparticles exhibited characteristic peaks corresponding to the oxide component Ti-O, hydroxyl group ˙OH and oxygen chemisorbed and presented an anatase-dominated multiphase structure that enhanced the photocatalytic performance. UV irradiation at 254 nm produced better sterilization effects on E. coli, S. aureus, and C. albicans, with elimination rates after 30 min of reaction of 97.8%, 99.4%, and 93.6%, respectively. These results indicated that the TiO2 nano-photocatalyst is a promising environmentally friendly catalyst with good sterilization performance. The constructed BP neural network also exhibited high training accuracy and good generalization ability, with correlation coefficients between the network-predicted and experimental target values of 0.9789. These results support research on the intelligent processing of photocatalytic sterilization with TiO2 nanoparticles.

Positively Charged Polymers as Promising Devices against Multidrug Resistant Gram-Negative Bacteria: A Review

Antibiotic resistance has increased markedly in Gram-negative bacteria, causing severe infections intractable with traditional drugs and amplifying mortality and healthcare costs. Consequently, to find novel antimicrobial compounds, active on multidrug resistant bacteria, is mandatory. In this regard, cationic antimicrobial peptides (CAMPs)—able to kill pathogens on contact—could represent an appealing solution. However, low selectivity, hemolytic toxicity and cost of manufacturing, hamper their massive clinical application. In the recent years—starting from CAMPs as template molecules—less toxic and lower-cost synthetic mimics of CAMPs, including cationic peptides, polymers and dendrimers, have been developed. Although the pending issue of hemolytic toxicity and biodegradability is still left not completely solved, cationic antimicrobial polymers (CAPs), compared to small drug molecules, thanks to their high molecular weight, own appreciable selectivity, reduced toxicity toward eukaryotic cells, more long-term activity, stability and non-volatility. With this background, an updated overview concerning the main manufactured types of CAPs, active on Gram-negative bacteria, is herein reported, including synthetic procedure and action’s mechanism. Information about their structures, antibacterial activity, advantages and drawbacks, was reported in the form of tables, which allow faster consultation and quicker learning concerning current CAPs state of the art, in order not to retrace reviews already available.

Antimicrobial Hyperbranched Polymer-Usnic Acid Complexes through a Combined ROP-RAFT Strategy

Polymer-drug conjugates have received considerable attention over the last decades due to their potential for improving the clinical outcomes for a range of diseases. It is of importance to develop methods for their preparation that have simple synthesis and purification requirements but maintain high therapeutic efficacy and utilize macromolecules that can be cleared via natural excretory pathways upon breakdown. Herein, the combination of ring-opening polymerization (ROP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization is described for the straightforward synthesis of amphiphilic, stimuli-responsive, biodegradable, and highly functionalizable hyperbranched polymers. These unimolecular nanoparticles demonstrate a versatile platform for the synthesis of polymer-drug conjugates owing to the inclusion of a Boc-protected polycarbonate moiety in either a block or random copolymer formation. A proof-of-concept study on the complexation of the poorly water-soluble antimicrobial drug usnic acid results in polymer-drug complexes with powerful antimicrobial properties against gram-positive bacteria. Therefore, this work highlights the potential of amphiphilic and biodegradable hyperbranched polymers for antimicrobial applications.

Polypropylene/ZnO Nanocomposites: Mechanical Properties, Photocatalytic Dye Degradation, and Antibacterial Property

Nanocomposite materials were prepared by compounding polypropylene (PP) with zinc oxide (ZnO) nanoparticles, using a twin-screw extruder. The compound was molded by injection molding to form dumbbell-shaped specimens. The influence of ZnO nanoparticle content on the morphology, mechanical properties, chemical structure, photocatalytic activity, and antibacterial properties of the obtained nanocomposites was investigated. The morphological images showed that the ZnO nanoparticles were well distributed in the PP matrix. Characterizations of the mechanical properties and chemical structures before and after sunlight exposure found that at the shortest exposure time, crosslinks could occur in the nanocomposites, which resulted in improved mechanical properties. However, sunlight exposure with the time period longer than 18 weeks caused the reduction of the mechanical properties, due to degradation of the PP matrix. It was found that PP with 2% ZnO could achieve the photocatalytic degradation of methylene blue up to 59%. Moreover, the result of antibacterial tests indicated that the nanocomposites had better antibacterial properties than neat PP.

Chemical functionality of multidomain peptide hydrogels governs early host immune response

Multidomain Peptide (MDP) hydrogels are nanofibrous materials with many potential biomedical applications. The peptide sequence design of these materials offers high versatility and allows for the incorporation of various chemical functionalities into the nanofibrous scaffold. It is known that host response to biomaterials is strongly affected by factors such as size, shape, stiffness, and chemistry. However, there is a lack of fundamental understanding of the host response to different MDP hydrogels. In particular, it is unknown what effect the chemical functionality displayed on the nanofiber has on biological activity. Here we evaluated the early inflammatory host response to four MDP hydrogels displaying amines, guanidinium ions, and carboxylates in a subcutaneous injection model. While all the studied peptide materials possess similar nanostructure and physical properties, they trigger markedly different inflammatory responses. These were characterized by immunophenotyping of the cellular infiltrate using multi-color flow cytometry. The negatively-charged peptides elicit minimal inflammation characterized by tissue-resident macrophage infiltration, fast remodeling, and no collagen deposition or blood vessel formation within the implants. In contrast, the positively-charged peptides are highly infiltrated by immune cells, are remodeled at a slower rate, promote angiogenesis, and result in a high degree of collagen deposition. The presence of dynamic cell phenotypes characterizes the inflammation caused by the lysine-based peptide, including inflammatory monocytes, macrophages, and lymphoid cells, which is seen to be resolving over time. The arginine-based hydrogel shows higher inflammatory response with a persistent and significant infiltration of polymorphonuclear myeloid-derived cells, even ten days after implantation. This understanding of the immune response to peptide biomaterials improves our ability to design effective materials and to tailor their use for specific biomedical applications.

Antibacterial properties of synthesized cyclic and linear cationic copolymers

Antibacterial activities of cationic cyclic copolymers compared to those of their linear counterparts were investigated.

Contact Killing of Gram-Positive and Gram-Negative Bacteria on PDMS Provided with Immobilized Hyperbranched Antibacterial Coatings

Here we describe in detail the preparation and application of antibacterial coatings on PDMS (poly(dimethylsiloxane)) and the contact-killing properties with 10 bacterial strains. Our aim was to develop a generally applicable coating to prevent biomaterial acquired infections, which is the major mode of failure of biomedical implants. In the first step, the surface was provided with a hydrophobic hyperbranched coating resin that was covalently attached to PDMS, mediated by an appropriate coupling agent. The coupling agent contained a siloxane group that reacts covalently with the silanol groups of air-plasma-treated PDMS and a blocked isocyanate enabling covalent coupling with the amino groups of the hyperbranched coating resins. The coating resins were functionalized with a polyethylenimine and subsequently quaternized with bromohexane and iodomethane. The coatings were highly effective against Gram-positive bacteria (five strains) and sufficiently active against Gram-negative bacteria (five stains). The killing effect on the latter group was strongly enhanced by adding a permeabilizer (EDTA). The biocidal efficacy was not influenced by the presence of (saliva) proteins.

Relationship between structure and molecular interactions in monolayers of specially designed aminolipids

Artificial cationic lipids are already recognized as highly efficient gene therapy tools. Here, we focus on another potential use of aminolipids, in their electrically-uncharged state, for the formation of covalently cross-linked, one-molecule-thin films at interfaces. Such films are envisioned for future (bio-)materials applications. To this end, Langmuir monolayers of structurally different aminolipids are comprehensively characterized with the help of highly sensitive surface characterization techniques. Pressure-area isotherms, Brewster angle microscopy, grazing-incidence X-ray diffraction and infrared reflection-absorption spectrometry experiments provide a detailed, comparative molecular picture of the formed monolayers. This physico-chemical study highlights the relationship between chemical structures and intermolecular interactions, which can serve as a basis for the rational design of cross-linked thin films with precisely controlled properties.