Lipid formulations of amphotericin B: where are we today?

Nanomaterial-Based Antifungal Therapies to Combat Fungal Diseases Aspergillosis, Coccidioidomycosis, Mucormycosis, and Candidiasis

Over the last years, invasive infections caused by filamentous fungi have constituted a serious threat to public health worldwide. Aspergillus, Coccidioides, Mucorales (the most common filamentous fungi), and Candida auris (non-filamentous fungus) can cause infections in humans. They are able to cause critical life-threatening illnesses in immunosuppressed individuals, patients with HIV/AIDS, uncontrolled diabetes, hematological diseases, transplantation, and chemotherapy. In this review, we describe the available nanoformulations (both metallic and polymers-based nanoparticles) developed to increase efficacy and reduce the number of adverse effects after the administration of conventional antifungals. To treat aspergillosis and infections caused by Candida, multiple strategies have been used to develop new therapeutic alternatives, such as incorporating coating materials, complexes synthesized by green chemistry, or coupled with polymers. However, the therapeutic options for coccidioidomycosis and mucormycosis are limited; most of them are in the early stages of development. Therefore, more research needs to be performed to develop new therapeutic alternatives that contribute to the progress of this field.

Inconsistent efficacy of water-soluble amphotericin B for the treatment of Macrorhabdus ornithogaster in a budgerigar (Melopsittacus undulatus) aviary

OBJECTIVE

To assess the efficacy of a commercially available in-water amphotericin B treatment for Macrorhabdus ornithogaster.

DESIGN

Clinical treatment trial.

METHODS

Faecal shedding of 16 naturally infected budgerigars (Melopsittacus undulatus) was monitored while they were being treated using in-water amphotericin B, as per the manufacturer's instructions, for 10 days. Any birds that remained positive after 10 days received a further 10 day course of treatment. All birds were rechecked 16 days after the end of the second treatment period.

RESULTS

At the conclusion of treatment, 11 birds had stopped shedding M. ornithogaster, and 5 birds were still shedding. Sixteen days after the conclusion of the second treatment period, four birds that were negative after 10 days of treatment were shedding again, and two of the birds that were treated for 20 days were shedding. In addition, one bird from each treatment group died after treatment and before follow-up testing.

CONCLUSION

These findings represent a 36% treatment failure, suggesting that treatment with the commercially available, water-soluble amphotericin B has inconsistent efficacy against M. ornithogaster in some budgerigars in Australia and is not effective for eliminating it from budgerigar aviaries.

Liposomal and Deoxycholate Amphotericin B Formulations: Effectiveness against Biofilm Infections of Candida spp

Background: candidiasis is the primary fungal infection encountered in patients undergoing prolonged hospitalization, and the fourth leading cause of nosocomial bloodstream infections. One of the most important Candida spp. virulence factors is the ability to form biofilms, which are extremely refractory to antimicrobial therapy and very difficult to treat with the traditional antifungal therapies. It is known that the prophylaxis or treatment of a systemic candidiasis are recurrently taken without considering the possibility of a Candida spp. biofilm-related infections. Therefore, it is important to assess the effectiveness of the available drugs and which formulations have the best performance in these specific infections. Methods: 24-h-biofilms of four Candida spp. and their response to two amphotericin B (AmB) pharmaceutical formulations (liposomal and deoxycholate) were evaluated. Results: generally, Candida glabrata was the less susceptible yeast species to both AmBs. MBECs revealed that it is therapeutically more appealing to use AmB-L than AmB-Deox for all Candida spp. biofilms, since none of the determined concentrations of AmB-L reached 10% of the maximum daily dose, but both formulations showed a very good capacity in the biomass reduction. Conclusions: the liposomal formulation presents better performance in the eradication of the biofilm cells for all the species in comparison with the deoxycholate formulation.

Biology, systematics, and clinical manifestations of Zygomycota infections

Fungi cause opportunistic, nosocomial, and community-acquired infections. Among fungal infections (mycoses) zygomycoses are exceptionally severe, with a mortality rate exceeding 50%. Immunocompromised hosts, transplant recipients, and diabetic patients with uncontrolled keto-acidosis and high iron serum levels are at risk. Zygomycota are capable of infecting hosts immune to other filamentous fungi. The infection often follows a progressive pattern, with angioinvasion and metastases. Moreover, current antifungal therapy frequently has an unfavorable outcome. Zygomycota are resistant to some of the routinely used antifungals, among them azoles (except posaconazole) and echinocandins. The typical treatment consists of surgical debridement of the infected tissues accompanied by amphotericin B administration. The latter has strong nephrotoxic side effects, which make it unsuitable for prophylaxis. Delayed administration of amphotericin and excision of mycelium-containing tissues worsens survival prognoses. More than 30 species of Zygomycota are involved in human infections, among them Mucorales is the most abundant. Prognosis and treatment suggestions differ for each species, which makes fast and reliable diagnosis essential. Serum sample PCR-based identification often gives false-negative results; culture-based identification is time-consuming and not always feasible. With the dawn of Zygomycota sequencing projects significant advancement is expected, as in the case of treatment of Ascomycota infections.

Preparation and characterization of amorphous amphotericin B nanoparticles for oral administration through liquid antisolvent precipitation

We prepared amphotericin B (AmB) nanoparticles through liquid antisolvent precipitation (LAP) and by freeze-drying to improve the solubility of AmB for oral administration. The LAP was optimized through a single-factor experiment. We determined the effects of surfactants and their concentration, the stirring time, the precipitation temperature, the stirring intensity, the drug concentration and the volume ratio of antisolvent to solvent on the mean particle size (MPS) of the AmB nanoparticles. Increased stirring intensity and precipitation time favored AmB nanoparticles with smaller MPS, but precipitation times exceeding 30 min did not further reduce the MPS. Increased Tween-80 concentration and the drug concentration decreased the MPS of the AmB nanoparticles. Increased precipitation temperature and antisolvent to solvent volume ratio initially decreased the MPS of the AmB nanoparticles, which increased thereafter. Optimum conditions produced AmB nanoparticles with an MPS of 135.1 nm. The AmB nanoparticles were characterized through scanning electron microscopy (SEM), mass spectrometry (MS), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermal gravimetric analysis (TG), solvent residue, drug purity test, and dissolution testing. The analyses indicated that the chemical structure of AmB remained unchanged in the nanoparticles, but the structure was changed from crystalline to amorphous. The residual DMSO in the nanoparticles was 0.24% less than the standard set by the International Conference on Harmonization limit for class III solvents. The AmB nanoparticles exhibited 2.1 times faster dissolution rates and 13 times equilibrium solubility compared with the raw drug. The detection results indicate that the AmB nanoparticles potentially improved the oral absorption of AmB.

Strategies for the design of orally bioavailable antileishmanial treatments

Leishmaniasis is one of the six major tropical diseases targeted by the World Health Organization. The most serious, life-threatening form is visceral leishmaniasis (VL). No vaccine is yet available for human use and chemotherapy is the main mean of dealing with this disease. This review focuses on the development of drug delivery systems (DDS) for treatment of leishmaniasis. After an overview of the significance of leishmaniasis in 2013, current chemotherapy and its limitations are considered, leading to possible strategies to improve the treatment of VL: new drugs, combinations of existing drugs and DDS, particularly for oral administration. Nanostructured biomaterials such as lipid-based or polymeric nanoparticles have unique physicochemical properties, ultra-small and controllable size, large surface area to mass ratio and the possibility of surface modification which can be used to advantage for the oral administration of antileishmanial drugs. They can improve the rate of dissolution of poorly water-soluble drugs, increase intestinal residence time by bioadhesion and, especially when lipid additives are used, influence the route and efficiency of absorption. These recent advances in this very active field should lead to better management of this serious disease.

Interactions of antileishmanial drugs with monolayers of lipids used in the development of amphotericin B-miltefosine-loaded nanocochleates

The emergence of strains of Leishmania resistant to existing drugs complicates the treatment of life-threatening visceral leishmaniasis. The development of new lipid formulation (nanocochleates), containing two active drugs: amphotericin B (AmB) and miltefosine (hexadecylphosphocholine, HePC), could increase effectiveness, decrease toxicity and reduce the risk of appearance of resistance. Nanocochleates are cigar-shaped structures of rolled negatively charged lipid bilayers bridged by calcium, prepared from dioleoylphosphatidylserine (DOPS) and cholesterol (Cho) and able to accommodate drugs. To determine the interaction, the orientation and the stability of the amphiphilic drugs in the lipid mixture and the optimal drugs/lipids ratio, the Langmuir film balance and BAM (Brewster angle microscopy) were used. The drugs were mixed with the lipids (DOPS or 9DOPS/1Cho) and spread at the air-water interface. A stability study showed that DOPS maintained HePC at the interface at low molar fraction of HePC; this effect became more marked in the presence of Cho. The fact that HePC can be stably associated with the monolayer at low molar fraction (below 10%) suggests that in the nanocochleates HePC is inserted between the lipid molecules rather than between the bilayers. Phase diagrams and BAM images showed that, even at low pressure, DOPS maintains AmB at low molar fraction (below 10%) in the "erect" rather than the horizontal form at the interface and that the presence of Cho reinforces this effect. These results allowed us to predict the organization and the orientation of these drugs in the nanocochleates and to determine the optimal drugs/lipids ratio.

Amphotericin B lipid nanoemulsion aerosols for targeting peripheral respiratory airways via nebulization

Amphotericin B (AmB) lipid nanoemulsions were prepared and characterized and their suitability for pulmonary delivery via nebulization was evaluated. AmB nanoemulsions were prepared by sonicating and vortexing the drug with two commercially available lipid nanoemulsions: the Intralipid(®) or Clinoleic(®). Loading the nanoemulsions with the drug slightly increased the size of the lipid droplets and did not affect the zeta potential of the nanoemulsions. The loading efficiency of AmB was found to be 87.46±2.21% in the Intralipid(®) nanoemulsions and 80.7±0.70% in the Clinoleic(®) formulation. This respectively corresponded to 21.86 mg and 20.19 mg of AmB being successfully loaded in the nanoemulsions. On aerosolization using a Pari Sprint jet nebulizer, both nanoemulsions produced very high drug output which was approximately 90% for both formulations. Using the two-stage impinger, the Clinoleic(®) emulsion had higher fine particle fraction (FPF) than the Intralipid(®), since the Clinoleic(®) displayed higher deposition of AmB in the lower impinger stage (exceeding 80%), compared to 57% for the Intralipid(®). Overall, the ease of preparation of the AmB lipid nanoemulsions, along with their in vitro nebulization performance suggest that lipid nanoemulsions could be successful nanocarriers for delivery of AmB to the peripheral respiratory airways.

Interaction of amphotericin B and its selected derivatives with membranes: molecular modeling studies

Amphotericin B (AmB) is a well-known antifungal antibiotic that has been used in the clinic for about five decades. Despite its chemotherapeutic importance, AmB is quite toxic and many efforts have been made to improve its pharmacological properties, e.g., by chemical modifications. The lipid membrane is a molecular target for AmB, however, due to heterogeneity of its components, the molecular mechanism of AmB action is still unclear. The lack of this knowledge hinders rational designing of new and less toxic AmB derivatives. Our review is a critical presentation of the current understanding of AmB molecular mechanism of action at the membrane level. Except the experimental approach, the extensive overview of molecular modeling studies, performed mostly in our lab, is presented. The results of interactions between AmB or some of its derivatives and lipid model membranes are discussed. In our studies, different biomembrane models and different associate states of the antibiotic were included. Presented molecular modeling approach is especially valuable with regard to a new paradigm of the structure of lipid membrane containing liquid-ordered domains. Hopefully, all these complementary experimental/computational approaches are going to reach the point at which a new hypothesis about molecular mechanism of AmB activity and selectivity will be put forward.