Re-usable self-poled piezoelectric/piezocatalytic films with exceptional energy harvesting and water remediation capability

Hybridization of Polymer-Encapsulated MoS2-ZnO Nanostructures as Organic-Inorganic Polymer Films for Sonocatalytic-Induced Dye Degradation

The development of environmentally friendly technology is vital to effectively address the issues related to environmental deterioration. This work integrates ZnO-decorated MoS2 (MZ) to create a high-performing PVDF-based PVDF/MoS2-ZnO (PMZ) hybrid polymer composite film for sonocatalytic organic pollutant degradation. An efficient synergistic combination of MZ was identified by altering the ratio, and its influence on PVDF was assessed using diverse structural, morphological, and sonocatalytic performances. The PMZ film demonstrated very effective sonocatalytic characteristics by degrading rhodamine B (RhB) dye with a degradation efficiency of 97.23%, whereas PVDF only degraded 17.7%. Combining MoS2 and ZnO reduces electron-hole recombination and increases the sonocatalytic degradation performance. Moreover, an ideal piezoelectric PVDF polymer with MZ enhances polarization to improve redox processes and dye degradation, ultimately increasing the degradation efficiency. The degradation efficiency of RhB was seen to decrease while employing isopropanol (IPA) and p-benzoquinone (BQ) due to the presence of reactive oxygen species. This suggests that the active species •O2- and •OH are primarily responsible for the degradation of RhB utilizing PMZ2 film. The PMZ film exhibited improved reusability without substantially decreasing its catalytic activity. The superior embellishment of ZnO onto MoS2 and effective integration of MZ into the PVDF polymer film results in improved degrading performance.

Polyvinylidene Fluoride Based Piezoelectric Composites with Strong Interfacial Adhesion via Click Chemistry for Self-Powered Flexible Sensors

Achieving relatively uniform dispersion in organic-inorganic composites with overwhelming differences in surface energy is a perennial challenge. Herein, novel eliminated polyvinylidene fluoride (EPVDF)/EPVDF functionalized barium titanate nanoparticles (EPVDF@BT) flexible piezoelectric nanogenerators (PENGs) with strong interfacial adhesion are developed via thermal stretching following sequential click chemistry. Thanks to the strong interfacial adhesion, the optimal PENGs containing ultra-high β-phase content (97.2%) exhibit not only optimized mechanical and dielectric behaviors but also excellent piezoelectric properties with high piezoelectric output (V = 10.7 V, I = 216 nA), reliable durability (8000 cycles), ultrafast response time (20 ms), and good sensitivity (2.09 nA kPa-1), far outperforming most reported PVDF-based composites. Furthermore, COMSOL finite element simulations (FEM) confirm that the elevated stress transfer efficiency induced by the strong interfacial adhesion is the main driving force for enhanced piezoelectric performances. For practical applications, self-powered PENGs can simply but stably capture mechanical energy, drive tiny electronic devices, and serve as potential multifunctional and durable sensors for detecting human physiological motions. This work opens a pioneering avenue to break the trade-offs between piezoelectric and other properties, which is of great importance for developing self-powered flexible sensors.

Calcium Single Atom Confined in Nitrogen-Doped Carbon-Coupled Polyvinylidene Fluoride Membrane for High-Performance Piezocatalysis

A piezoelectric polymer membrane based on single metal atoms was demonstrated to be effective by anchoring isolated calcium (Ca) atoms on a composite of nitrogen-doped carbon and polyvinylidene fluoride (PVDF). The addition of Ca-atom-anchored carbon nanoparticles not only promotes the formation of the β phase (from 29.8 to 56.3%), the most piezoelectrically active phase, in PVDF, but also introduces much higher porosity and hydrophilicity. Under ultrasonic excitation, the fabricated catalyst membrane demonstrates a record-high and stable dye decomposing rate of 0.11 min-1 and antibacterial efficiencies of 99.8%. Density functional theory calculations reveal that the primary contribution to catalytic activity arises from single-atom Ca doping and that a possible synergistic effect between PVDF and Ca atoms can improve the catalytic performance. It is shown that O2 molecules can be easily hydrogenated to produce ·OH on Ca-PVDF, and the local electric field provided by the β-phase-PVDF might enhance the production of ·O2-. The proposed polymer membrane is expected to inspire the rational design of piezocatalysts and pave the way for the application of piezocatalysis technology for practical environmental remediation.

Boosting Demulsification and Antifouling Capacity of Membranes via an Enhanced Piezoelectric Effect for Sustaining Emulsion Separation

Traditional superwettable membranes for demulsification of oil/water emulsions could not maintain their separation performance for long because of low demulsification capacity and surface fouling during practical applications. A charging membrane could repel the contaminants for a while, the charge of which would gradually be neutralized during the separation progress. Here, a superhydrophilic piezoelectric membrane (SPM) with sustained demulsification and antifouling capacity is proposed for achieving prolonged emulsion separation, which is capable of converting inherent pulse hydraulic filtration pressure into pulse voltage. A pulse voltage up to -7.6 V is generated to intercept the oil by expediting the deformation and coalescence of emulsified oil droplets, realizing the demulsification. Furthermore, it repels negatively charged oil droplets, avoiding membrane fouling. Additionally, any organic foulants adhering to the membrane undergo degradation facilitated by the generated reactive oxygen species. The separation data demonstrate a 98.85% efficiency with a flux decline ratio below 14% during a 2 h separation duration and a nearly 100% flux recovery of SPM. This research opens new avenues in membrane separation, environmental remediation, etc.

Natural Clay-Modified Piezocatalytic Membrane for Efficient Removal of Coliform Bacteria from Wastewater

In the modern era, water pollution, especially from industries, agricultural farms, and residential areas, is caused by the release of a large scale of heavy metals, organic pollutants, chemicals, etc., into the environment, posing a serious threat to aquatic ecosystems and nature. Moreover, untreated sewage waste discharged directly into nearby water bodies can cause various diseases to mankind due to the high load of fecal coliform bacteria. This work demonstrates the development of a biocompatible, cost-effective, highly robust, efficient, flexible, freestanding, and reusable membrane using naturally formed biocompatible kaolinite clay-doped poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for effective piezodynamic destruction of coliform bacteria. In this study, Escherichia coli (E. coli) and Enterococcus faecalis (E. faecalis) have been used to evaluate the mechanical stimulus-responsive antibacterial efficacy of the nanocomposite membrane. The membrane can effectively eradicate nearly 99% viable E. coli and 97% E. faecalis within a span of 40 min under mechanical stimulation (soft ultrasound ∼15 kHz). To further understand the mechanism, an evaluation of reactive oxygen species and bacterial FESEM was performed. These studies revealed that bacterial cells suffered severe visible cell damage after 40 min of piezocatalysis, elucidating the fact that the synthesized membrane is capable of producing a superior piezodynamic antibacterial effect.

PVDF-Based Piezo-Catalytic Membranes-A Net-Zero Emission Approach towards Textile Wastewater Purification

Among the various water purification techniques, advancements in membrane technology, with better fabrication and analysis, are receiving the most research attention. The piezo-catalytic degradation of water pollutants is an emerging area of research in water purification technology. This review article focuses on piezoelectric polyvinylidene difluoride (PVDF) polymer-based membranes and their nanocomposites for textile wastewater remediation. At the beginning of this article, the classification of piezoelectric materials is discussed. Among the various membrane-forming polymers, PVDF is a piezoelectric polymer discussed in detail due to its exceptional piezoelectric properties. Polyvinylidene difluoride can show excellent piezoelectric properties in the beta phase. Therefore, various methods of β-phase enhancement within the PVDF polymer and various factors that have a critical impact on its piezo-catalytic activity are briefly explained. This review article also highlights the major aspects of piezoelectric membranes in the context of dye degradation and a net-zero approach. The β-phase of the PVDF piezoelectric material generates an electron-hole pair through external vibrations. The possibility of piezo-catalytic dye degradation via mechanical vibrations and the subsequent capture of the resulting CO2 and H2 gases open up the possibility of achieving the net-zero goal.

Energy harvesting from water impact using piezoelectric energy harvester

Energy, as an indispensable part of human life, has been a hot topic of research among scholars. The water kinetic energy generated by ocean currents, as a kind of clean energy, has high utilization rate, high power generation potential, and a broad prospect of powering microelectronic devices. As a result, the water kinetic piezoelectric energy harvester (WKPEH) has made significant progress in powering ocean sensors by harvesting ocean currents. This paper provides a comprehensive review of technologies that have been used in recent years to harvest energy from marine fluids using WKPEH. Detailed study of the energy harvesting mechanism of WKPEH. WKPEH can use the flutter-induced vibrations, vortex-induced vibrations, and wake oscillation principles to harvest water kinetic energy. The structural characteristics and output performance of each mechanism are also discussed and compared, and finally, a prospect on WKPEH is given.

Contact-Electro-Catalysis-Assisted Separation via a Dancing PTFE Membrane for Fouling Control

Advanced oxidization processes (AOPs) offer promising solutions for addressing the fouling issues in membrane separation systems. However, the high energy requirements for electrical or light power in the AOPs can be a drawback. In this study, we present a contact-electro-catalysis (CEC)-based approach for controlling membrane fouling, which is stimulated by mild ultrasonic irradiation. During this process, electrons are transferred between a dancing polytetrafluoroethylene membrane and water or oxygen molecules, resulting in the formation of free radicals •OH and •O2-. These free radicals are capable of degrading or inactivating foulants, eliminating the need for additional chemical cleaners, secondary waste disposal, or external stimuli. Furthermore, the time-dependent voltage spikes/oscillations (peak, +7.8/-8.2 V) generate a nonuniform electric field that drives dielectrophoresis, effectively keeping contaminants away from the membrane surface and further enhancing the antifouling performance of the dancing membrane. Therefore, the CEC-assisted membrane separation system offers a green and effective strategy for controlling membrane fouling through mild mechanical stimulation.

Synergistic sono-adsorption and adsorption-enhanced sonochemical degradation of dyes in water by additive manufactured PVDF-based materials

The present study proposes the first mechanistic model accounting for the most meaningful physico-chemical phenomena taking place in liquid phase adsorption processes under ultrasound. Initially, this study was aimed at developing an easy-to-make and easy-to-recover piezocatalyst for the degradation of RhB in water by combining the high piezocatalytical performance of BaTiO3 with a compatible piezoelectric support such as PVDF, manufactured by a customised additive manufacturing - direct ink writing system with in-situ poling. However, initial results showed that the resulting PVDF-BaTiO3 composite slabs performed worse than BaTiO3 piezocatalysts on their own, and that poling did not have any effect on their performance (82% RhB removal after 2 h when using either poled or unpoled PVDF-BaTiO3 composite slabs compared to 92% RhB removal after 2 h in presence of BaTiO3 piezocatalysts). Further investigation with pure PVDF materials demonstrated that, instead of piezocatalysis, synergistic ultrasound-assisted adsorption and sonochemical degradation were taking place, enabling the removal of >95% of the dye within 40 min of ultrasound treatment in the presence of 4 g L-1 of additive manufactured PVDF slabs. The results of this study and their evaluation with the mechanistic model proposed for liquid phase adsorption under ultrasound suggest that the adsorption of RhB on additive manufactured PVDF slabs was enhanced by the structure, higher specific surface ratio and higher volume of mesopores achieved through the 3D-printing process, as well as the minimisation of film resistance to mass transport due to ultrasound. Moreover, adsorption on additive manufactured PVDF enhanced the sonochemical degradation of the dye due to its high concentration in the adsorbed phase. This study demonstrates that adsorption processes, especially in the presence of PVDF materials, may be significantly more important in piezocatalysis than what has been reported to date, to the point that the synergistic combination of sono-adsorption and sonochemical degradation in presence of additive-manufactured PVDF slabs may be enough to achieve high removal rates of dyes in water.

Flexible Composites for Piezocatalysis

Despite piezoelectric materials have a long history of application, piezoelectric catalysis has continued to be a hot topic in recent years. Flexible piezoelectric materials have just emerged in recent years due to their versatility and designability. In this paper, we review the recent advances in flexible piezoelectric materials for catalysis, discuss the fundamentals of the catalytic properties of composite materials, and detail the typical structures of these materials. We pay special attention to the types of filler in flexible piezoelectric composites, their role and the interaction between the particles and the flexible substrate. Notable examples of flexible piezoelectric materials for organic pollutants degradation, enhanced piezo-photocatalysis and antibacterial applications are also presented. Finally, we present key issues and future prospects for the development of flexible piezoelectric catalysts.

Combination NIPS/TIPS Synthesis of α-Fe2O3 and α/γ-Fe2O3 Doped PVDF Composite for Efficient Piezocatalytic Degradation of Rhodamine B

Highly porous membranes based on polyvinylidene fluoride (PVDF) with the addition of nanoscale particles of non-magnetic and magnetic iron oxides were synthesized using a combined method of non-solvent induced phase separation (NIPS) and thermo-induced phase separation (TIPS) based on the technique developed by Dr. Blade. The obtained membranes were characterized using SEM, EDS, XRD, IR, diffuse reflectance spectroscopy, and fluorescent microscopy. It was shown that the membranes possessed a high fraction of electroactive phase, which increased up to a maximum of 96% with the addition of 2 wt% of α-Fe2O3 and α/γ-Fe2O3 nanoparticles. It was demonstrated that doping PVDF with nanoparticles contributed to the reduction of pore size in the membrane. All membranes exhibited piezocatalytic activity in the degradation of Rhodamine B. The degree of degradation increased from 69% when using pure PVDF membrane to 90% when using the composite membrane. The nature of the additive did not affect the piezocatalytic activity. It was determined that the main reactive species responsible for the degradation of Rhodamine B were •OH and •O2-. It was also shown that under piezocatalytic conditions, composite membranes generated a piezopotential of approximately 2.5 V.

Piezodynamic Eradication of Both Gram-Positive and Gram-Negative Bacteria by Using a Nanoparticle Embedded Polymeric Membrane

Nowadays, bacterial infection is regarded as a serious threat to humankind, which needs to be taken care of. The emergence of antibiotic resistance and multidrug resistance (MDR) is rendering this situation more troublesome. However, several alternative treatment regimens have aided such diseases quite well in the recent past, among which dynamic antibacterial therapies combat this situation quite well. Among various dynamic therapies, piezodynamic therapy is a very recent avenue, in which mechanical stimuli have been exploited to treat bacterial infections. Herein, piezo-active bismuth ferrite-loaded poly(vinylidene fluoride-co-hexafluoropropylene) polymer has been utilized to eradicate gram-positive bacteria (E. faecalis) and gram-negative bacteria (E. coli). The sample has been designed in a free-standing membrane form, which, under soft ultrasound (~10 kHz), generates reactive radicals to ablate bacteria. Initially, the structure and morphology of the membrane have been substantiated by using X-ray diffraction and scanning electron microscopy methods; besides, Fourier transform infrared spectrum of the sample depicts a tremendously high value of polarizability and further confirms the piezo-activity of the membrane. More than 99% of E. coli and E. faecalis have been successfully eradicated within 30 min of ultrasound. Moreover, the solid-state structure and hydrophobic nature of the membrane help us to reuse it in a cyclic manner, which is possibly reported herein for the very first time. This novel membrane could be deployed in healthcare systems and pigment industries and could be exploited as a self-cleaning material.

Flexible triboelectric nanogenerators using transparent copper nanowire electrodes: energy harvesting, sensing human activities and material recognition

Triboelectric nanogenerators (TENGs) have emerged as a promising green technology to efficiently harvest otherwise wasted mechanical energy from the environment and human activities. However, cost-effective and reliably performing TENGs require rational integration of triboelectric materials, spacers, and electrodes. The present work reports for the first time the use of oxydation-resistant pure copper nanowires (CuNWs) as an electrode to develop a flexible, and inexpensive TENG through a potentially scalable approach involving vacuum filtration and lactic acid treatment. A ∼6 cm2 device yields a remarkable open circuit voltage (Voc) of 200 V and power density of 10.67 W m-2 under human finger tapping. The device is robust, flexible and noncytotoxic as assessed by stretching/bending maneuvers, corrosion tests, continuous operation for 8000 cycles, and biocompatibility tests using human fibroblast cells. The device can power 115 light emitting diodes (LEDs) and a digital calculator; sense bending and motion from the human hand; and transmit Morse code signals. The robustness, flexibility, transparency, and non-cytotoxicity of the device render it particularly promising for a wide range of energy harvesting and advanced healthcare applications, such as sensorised smart gloves for tactile sensing, material identification and safer surgical intervention.

Self-Cleaning Bending Sensors Based on Semitransparent ZnO Nanostructured Films

The design of multifunctional nanostructured materials is the key to the development of smart wearable devices. For instance, nanostructures endowed with both piezoelectric and photocatalytic activities could well be the workhorse for solar-light-driven self-cleaning wearable sensors. In this work, a simple strategy for the assembly of a flexible, semitransparent piezophotocatalytic system is demonstrated by leveraging rational wet chemistry synthesis of ZnO-based nanosheets/nanoflowers (NSs/NFs) under basic pH conditions onto flexible ITO/PET supports. A KMnO₄ pretreatment before the ZnO synthesis (seeded ZnO) allows for the control of the density, size, and orientation of the NSs/NFs systems compared to the systems produced in the absence of seeding (seedless ZnO). The electrical response of the sensors is extracted at a 1 V bias as a function of bending in the interval between 0 and 90°, being the responsivity toward bending significantly enhanced by the KMnO₄ treatment effect. The photocatalytic activity of the sensors is analyzed in aqueous solution (methylene blue, 25 μM) by a solar simulator, resulting in similar values between seedless and seeded ZnO. Upon bending the sensor, the photocatalytic activity of seedless ZnO is almost unaffected, whereas that of seeded ZnO is improved by about 25%. The sensor's reusability and repeatability are tested in up to three different cycles. These results open up the way toward the seamless integration of bending sensitivity and photocatalysis into a single device.

Sonopiezoelectric Nanomedicine and Materdicine

Endogenous electric field is ubiquitous in a multitude of important living activities such as bone repair, cell signal transduction, and nerve regeneration, signifying that regulating the electric field in organisms is highly beneficial to maintain organism health. As an emerging and promising research direction, piezoelectric nanomedicine and materdicine precisely activated by ultrasound with synergetic advantages of deep tissue penetration, remote spatiotemporal selectivity, and mechanical-electrical energy interconversion, have been progressively utilized for disease treatment and tissue repair by participating in the modulation of endogenous electric field. This specific nanomedicine utilizing piezoelectric effect activated by ultrasound is typically regarded as "sonopiezoelectric nanomedicine". This comprehensive review summarizes and discusses the substantially employed sonopiezoelectric nanomaterials and nanotherapies to provide an insight into the internal mechanism of the corresponding biological behavior/effect of sonopiezoelectric biomaterials in versatile disease treatments. This review primarily focuses on the sonopiezoelectric biomaterials for biosensing, drug delivery, tumor therapy, tissue regeneration, antimicrobia, and further illuminates the underlying sonopiezoelectric mechanism. In addition, the challenges and developments/prospects of sonopiezoelectric nanomedicine are analyzed for promoting the further clinical translation. It is earnestly expected that this kind of nanomedicine/biomaterials-enabled sonopiezoelectric technology will provoke the comprehensive investigation and promote the clinical development of the next-generation multifunctional materdicine.

Piezoelectric materials and techniques for environmental pollution remediation

With the rapid development of industrialization and agriculture, a series of critical imminent environmental problems and water pollution have caught wide attention from the public and society. Piezoelectric catalysis technology with piezoelectric materials is a green and environmental method that can efficiently improve the separation of electron-hole pairs, then generating the active substances such as OH, H₂O₂ and O₂^-, which can degrade water pollutants. Therefore, we firstly surveyed the piezoelectric catalysis in piezoelectric materials and systematically concluded and emphasized the relationship between piezoelectric materials and the piezoelectric catalytic mechanism, the goal to elucidate the effect of polarization on piezoelectric catalytic performance and enhance piezoelectric catalytic performance. Subsequently, the applications of piezoelectric materials in water treatment and environmental pollutant remediation were discussed including degradation of organic pollutants, removal of heavy mental ions, radionuclides, bacteria disinfection and water splitting for H₂ generation. Finally, the development prospects and future outlooks of piezoelectric catalysis were presented in detail.

Degradation of methyl orange by dielectric films based on contact-electro-catalysis

Contact-electro-catalysis (CEC) has been recently proposed for the effective degradation of methyl orange, but the reactivity of catalysts in the CEC process needs further investigation. Here, we have used dielectric films, such as fluorinated ethylene propylene (FEP), modified by inductively coupled plasma (ICP) etching with argon, to replace the previously employed micro-powder due to their potential scalability, facile recycling process, and possible lower generation of secondary pollution. It has been found that ICP creates cone-like micro/nano structures on the surface, and thus changes the contact angle and specific surface area. The value of the contact angle varies non-linearly with etching time and attains a maximum after 60 seconds of etching. Concurrently, an increased electron transfer is observed, as well as an enhanced degradation efficiency, thus suggesting a special role of the surface structure. Finally, KPFM measurements show a lower electron affinity at the summit of the nanocones. This observation suggests that the structures are endowed with higher charge transfer ability. In addition, this film-based CEC has been observed in several polymer materials, such as PET, PTFE, and PVC. We view this work as a stepping stone to develop CEC into scalable applications, based on film technologies.

Transmissive Labyrinthine Acoustic Metamaterial-Based Holography for Extraordinary Energy Harvesting

Conventional energy sources are continuously depleting, and the world is actively seeking new green and efficient energy solutions. Enormous amounts of acoustic energy are dissipated daily, but the low intensity and limited efficiency of current harvesting techniques are preventing its adoption as a ubiquitous method of power generation. Herein, a strategic solution to increase acoustic energy harvesting efficiency using a specially designed metamaterial is implemented. A scalable transmissive labyrinthine acoustic metamaterial (LAM) is designed, developed, and employed to maximize ultrasound (40 kHz) capture over its large surface area (>27 k mm2), which is focused onto a piezoelectric film (78.6 mm2), thus magnifying incident sound pressure by 13.6 times. Three different piezoelectric films - two commercial and one lab-made nanocomposite film are tested with LAM in the acoustic energy harvesting system. An extraordinary voltage gain of 157-173% and a maximum power gain of 272% using the LAM compared to the case without the LAM are achieved. Multipoint focusing using holographic techniques, showcasing acoustic patterning to allow on-demand simultaneous harvesting in separate locations, is demonstrated. Our versatile approach for high-intensity acoustic energy harvesting opens future opportunities to exploit sound energy as a resource to contribute toward global sustainability.

Piezocatalytic Techniques in Environmental Remediation

As a consequence of rapid industrialization throughout the world, various environmental pollutants have begun to accumulate in water, air, and soil. This endangers the ecological environment of the earth, and environmental remediation has become an immediate priority. Among various environmental remediation techniques, piezocatalytic techniques, which uniquely take advantage of the piezoelectric effect, have attracted much attention. Piezoelectric effects allow pollutant degradation directly, while also enhancing photocatalysis by reducing the recombination of photogenerated carriers. In this Review, we provide a comprehensive summary of recent developments in piezocatalytic techniques for environmental remediation. The origin of the piezoelectric effect as well as classification of piezoelectric materials and their application in environmental remediation are systematically summarized. We also analyze the potential underlying mechanisms. Finally, urgent problems and the future development of piezocatalytic techniques are discussed.

Breathable Bactericide Piezocatalyst Integrating Anode-Cathode Heterojunction Capacitance on a Piezoelectric-Conductive Film

Piezocatalysis has received great attention in recent years. However, despite the great promise therein, high-performance piezocatalysts are still rare and the principles in designing high-performance piezocatalysts remain lacking. We demonstrate here a novel piezocatalyst design by integrating the oxidizing and reducing reaction sites heterojunction on a piezoelectric and conductive matrix. The catalytic composite generates reactive oxidizing species with unprecedented high capabilities. The •O₂^- yield is over 400% that of previously reported catalysts and for the first time realized effective piezocatalytic bactericidal effects over 99%. A range of structural features, including proper energy band alignments, high capacitance, patterned high conductivity, voltage-regulated wettability, and effective piezoelectrical capability, are believed to synergize for their high piezocatalytic performance. This study has extended the piezocatalysts with new design principles, effective descriptors of merits, new applications, and effective performance capabilities.

Piezocatalytic Medicine: An Emerging Frontier using Piezoelectric Materials for Biomedical Applications

Emerging piezocatalysts have demonstrated their remarkable application potential in diverse medical fields. In addition to their ultrahigh catalytic activities, their inherent and unique charge-carrier-releasing properties can be used to initiate various redox catalytic reactions, displaying bright prospects for future medical applications. Triggered by mechanical energy, piezocatalytic materials can release electrons/holes, catalyze redox reactions of substrates, or intervene in biological processes to promote the production of effector molecules for medical purposes, such as decontamination, sterilization, and therapy. Such a medical application of piezocatalysis is termed as piezocatalytic medicine (PCM) herein. To pioneer novel medical technologies, especially therapeutic modalities, this review provides an overview of the state-of-the-art research progress in piezocatalytic medicine. First, the principle of piezocatalysis and the preparation methodologies of piezoelectric materials are introduced. Then, a comprehensive summary of the medical applications of piezocatalytic materials in tumor treatment, antisepsis, organic degradation, tissue repair and regeneration, and biosensing is provided. Finally, the main challenges and future perspectives in piezocatalytic medicine are discussed and proposed, expecting to fuel the development of this emerging scientific discipline.

Enhanced Triboelectric Effects of Self-Poled MoS2-Embedded PVDF Hybrid Nanocomposite Films for Bar-Printed Wearable Triboelectric Nanogenerators

Self-poled molybdenum disulfide embedded polyvinylidene fluoride (MoS₂@PVDF) hybrid nanocomposite films fabricated by a bar-printing process are demonstrated to improve the output performances of triboelectric nanogenerators (TENGs). Comparative analyses of MoS₂@PVDF films with different MoS₂ concentrations and the synergic effect based on postannealing at different temperatures were examined to increase the triboelectric open-circuit voltage and the short-circuit current (∼200 V and ∼11.8 μA, respectively). A further comprehensive study of the structural and electrical changes that occur on the surfaces of the proposed hybrid nanocomposite films revealed that both MoS₂ incorporation into PVDF and postannealing can individually promote the formation of the β-crystal phase and generate polarity in the PVDF. In addition, MoS₂, which provides triboelectric trap states, was found to play a significant role in improving the charge capture capacity of the nanocomposite film and increasing the potential difference between two electrodes of TENGs. The produced electrical energy of the developed wearable TENGs with excellent operational stability for a long duration was utilized to power a variety of mobile smart gadgets in addition to low-power electronic devices. We believe that this study can provide a simple and effective approach to improving the energy-harvesting capabilities of wearable TENGs based on hybrid nanocomposite films.

The benefits of combining 1D and 3D nanofillers in a piezocomposite nanogenerator for biomechanical energy harvesting

Mechanical energy harvesting using piezoelectric nanogenerators (PNGs) offers an attractive solution for driving low-power portable devices and self-powered electronic systems. Here, we designed an eco-friendly and flexible piezocomposite nanogenerator (c-PNG) based on H₂(Zr_0.1Ti_0.9)₃O₇ nanowires (HZTO-nw) and Ba_0.85Ca_0.15Zr_0.10Ti_0.90O₃ multipods (BCZT-mp) as fillers and polylactic acid (PLA) as a biodegradable polymer matrix. The effects of the applied stress amplitude, frequency and pressing duration on the electric outputs in the piezocomposite nanogenerator (c-PNG) device were investigated by simultaneous recording of the mechanical input and the electrical outputs. The fabricated c-PNG shows a maximum output voltage, current and volumetric power density of 11.5 V, 0.6 μA and 9.2 mW cm^-3, respectively, under cyclic finger imparting. A high-pressure sensitivity of 0.86 V kPa^-1 (equivalent to 3.6 V N^-1) and fast response time of 45 ms were obtained in the dynamic pressure sensing. Besides this, the c-PNG demonstrates high-stability and durability of the electrical outputs for around three months, and can drive commercial electronics (charging capacitor, glowing light-emitting diodes and powering a calculator). Multi-physics simulations indicate that the presence of BCZT-mp is crucial in enhancing the piezoelectric response of the c-PNG. Accordingly, this work reveals that combining 1D and 3D fillers in a polymer composite-based PNG could be beneficial in improving the mechanical energy harvesting performances in flexible piezoelectric nanogenerators for application in electronic skin and wearable devices.

Molybdenum disulfide (MoS2) based photoredox catalysis in chemical transformations

Photoredox catalysis has been explored for chemical reactions by irradiation of photoactive catalysts with visible light, under mild and environmentally benign conditions. Furthermore, this methodology permits the activation of abundant chemicals into valuable products through novel mechanisms that are otherwise inaccessible. In this context, MoS2 has drawn attention due to its excellent solar spectral response and its notable electrical, optical, mechanical and magnetic properties. MoS2 has a number of characteristic properties like tunable band gap, enhanced absorption of visible light, a layered structure, efficient photon electron conversion, good photostability, non-toxic nature and quantum confinement effects that make it an ideal photocatalyst and co-catalyst for chemical transformations. Recently, MoS2 has gained synthetic utility in chemical transformations. In this review, we will discuss MoS2 properties, structure, synthesis techniques, and photochemistry along with modifications of MoS2 to enhance its photocatalytic activity with a focus on its applications and future challenges.

Ultra-Sensitive, Deformable, and Transparent Triboelectric Tactile Sensor Based on Micro-Pyramid Patterned Ionic Hydrogel for Interactive Human-Machine Interfaces

Rapid advances in wearable electronics and mechno-sensational human-machine interfaces impose great challenges in developing flexible and deformable tactile sensors with high efficiency, ultra-sensitivity, environment-tolerance, and self-sustainability. Herein, a tactile hydrogel sensor (THS) based on micro-pyramid-patterned double-network (DN) ionic organohydrogels to detect subtle pressure changes by measuring the variations of triboelectric output signal without an external power supply is reported. By the first time of pyramidal-patterned hydrogel fabrication method and laminated polydimethylsiloxane (PDMS) encapsulation process, the self-powered THS shows the advantages of remarkable flexibility, good transparency (≈85%), and excellent sensing performance, including extraordinary sensitivity (45.97 mV Pa-1 ), fast response (≈20 ms), very low limit of detection (50 Pa) as well as good stability (36 000 cycles). Moreover, with the LiBr immersion treatment method, the THS possesses excellent long-term hyper anti-freezing and anti-dehydrating properties, broad environmental tolerance (-20 to 60 °C), and instantaneous peak power density of 20 µW cm-2 , providing reliable contact outputs with different materials and detecting very slight human motions. By integrating the signal acquisition/process circuit, the THS with excellent self-power sensing ability is utilized as a switching button to control electric appliances and robotic hands by simulating human finger gestures, offering its great potentials for wearable and multi-functional electronic applications.

Hydrogels as Soft Ionic Conductors in Flexible and Wearable Triboelectric Nanogenerators

Flexible triboelectric nanogenerators (TENGs) have attracted increasing interest since their advent in 2012. In comparison with other flexible electrodes, hydrogels possess transparency, stretchability, biocompatibility, and tunable ionic conductivity, which together provide great potential as current collectors in TENGs for wearable applications. The development of hydrogel-based TENGs (H-TENGs) is currently a burgeoning field but research efforts have lagged behind those of other common flexible TENGs. In order to spur research and development of this important area, a comprehensive review that summarizes recent advances and challenges of H-TENGs will be very useful to researchers and engineers in this emerging field. Herein, the advantages and types of hydrogels as soft ionic conductors in TENGs are presented, followed by detailed descriptions of the advanced functions, enhanced output performance, as well as flexible and wearable applications of H-TENGs. Finally, the challenges and prospects of H-TENGs are discussed.

Spider Silk-Inspired Artificial Fibers

Spider silk is a natural polymeric fiber with high tensile strength, toughness, and has distinct thermal, optical, and biocompatible properties. The mechanical properties of spider silk are ascribed to its hierarchical structure, including primary and secondary structures of the spidroins (spider silk proteins), the nanofibril, the "core-shell", and the "nano-fishnet" structures. In addition, spider silk also exhibits remarkable properties regarding humidity/water response, water collection, light transmission, thermal conductance, and shape-memory effect. This motivates researchers to prepare artificial functional fibers mimicking spider silk. In this review, the authors summarize the study of the structure and properties of natural spider silk, and the biomimetic preparation of artificial fibers from different types of molecules and polymers by taking some examples of artificial fibers exhibiting these interesting properties. In conclusion, biomimetic studies have yielded several noteworthy findings in artificial fibers with different functions, and this review aims to provide indications for biomimetic studies of functional fibers that approach and exceed the properties of natural spider silk.

Piezoelectric catalytic, photocatalytic and adsorption capability and selectivity removal of various dyes and mixed dye wastewater by ZnO nanoparticles

The C-O functional group decorated ZnO nanoparticles with high UV absorption and VIS/NIR reflectance were synthesized by a simple wet chemistry method using various chelating agents. This study attempts to explore the internal mechanism of the piezoelectric catalytic activity, photocatalytic activity and adsorption performance of ZnO nanoparticles. The phase purity, particle size, optical band gap and photocatalytic activity of ZnO nanoparticles showed strong chelating agent - dependent behavior. The ZnO nanoparticles prepared by using EDTA as a chelating agent exhibits smallest particle size, highest photocatalytic activity for the degradation of methyl orange, methylene blue and rhodamine B, high adsorption capacity for the adsorption of Congo red and high vibration-catalytic performance for the vibration degradation of rhodamine B. The synergies mechanism among piezoelectric catalysis, photocatalysis and adsorption capacity of ZnO nanoparticles are discussed on the basis of the experimental results.

Piezo-responsive bismuth ferrite nanoparticle-mediated catalytic degradation of rhodamine B and pathogenic E. coli in aqueous medium and its extraction using external magnetic stimulation after successful treatment

Piezocatalytic bismuth ferrite nanoparticles (BFO) were used for the degradation of organic dye (RhB) and pathogenic bacteria (E. coli), then extracted using external magnetic stimulation after the successful operation.

Recent advances in piezocatalytic polymer nanocomposites for wastewater remediation

Among several forms of water pollutants, common pesticides, herbicides, organic dyes and heavy metals present serious and persistent threats to human health due to their severe toxicity. Recently, piezocatalysis based removal of pollutants has become a promising field of research to combat such pollutions by virtue of the piezoelectric effect. In reality, piezoelectric materials can produce electron-hole separation upon external vibration, which greatly enhances the production of various reactive oxygen species (ROS) and further increases the pollutant degradation rate. Piezocatalysis does not alter the quality or composition of water, like several other conventional techniques (adsorption and photocatalysis), which makes this technique non-invasive. The simplicity and tremendously high efficacy of piezocatalysis have attracted researchers worldwide and thus various functional materials are employed for piezocatalytic wastewater remediation. In this frontier, we highlight and demonstrate recent developments on polymer based piezocatalytic nanocomposites to treat industrial wastewater in a facile manner that holds strong potential to be translated into a clean and green technology.

Progress in Piezoelectric Nanogenerators Based on PVDF Composite Films

In recent years, great progress has been made in the field of energy harvesting to satisfy increasing needs for portable, sustainable, and renewable energy. Among piezoelectric materials, poly(vinylidene fluoride) (PVDF) and its copolymers are the most promising materials for piezoelectric nanogenerators (PENGs) due to their unique electroactivity, high flexibility, good machinability, and long–term stability. So far, PVDF–based PENGs have made remarkable progress. In this paper, the effects of the existence of various nanofillers, including organic–inorganic lead halide perovskites, inorganic lead halide perovskites, perovskite–type oxides, semiconductor piezoelectric materials, two–dimensional layered materials, and ions, in PVDF and its copolymer structure on their piezoelectric response and energy–harvesting properties are reviewed. This review will enable researchers to understand the piezoelectric mechanisms of the PVDF–based composite–film PENGs, so as to effectively convert environmental mechanical stimulus into electrical energy, and finally realize self–powered sensors or high–performance power sources for electronic devices.

Flexible Ag@LiNbO3/PVDF Composite Film for Piezocatalytic Dye/Pharmaceutical Degradation and Bacterial Disinfection

A flexible poly(vinylidene difluoride) (PVDF) composite film embedding LiNbO₃ ceramics decorated with silver nanoparticles (Ag NPs) has been synthesized using the solvent casting method. The polar β-phase, Ag NPs, and LiNbO₃ phases were confirmed in the composite film using various characterization methods. The composite film showed promising degradation of cationic and anionic dyes using piezocatalysis under ultrasonication. Moreover, this composite film also effectively degraded two model pharmaceutical pollutants named tetracycline and ciprofloxacin using piezocatalysis under ultrasonication. In addition to this, this composite film piezocatalytically removed more than 99.999% of Escherichia coli and 96.65% of Staphylococcus aureus bacteria within 180 min of sonication. The piezocatalytic performance of the PVDF composite film embedding Ag-loaded LiNbO₃ in all three applications was superior to that obtained in the case of the PVDF film embedding LiNbO₃ and the bare PVDF film. This demonstrates the pronounced effect of Ag NPs in the increase of piezocatalytic activity in the composite film.