Constructing P-CoMoO4@NiCoP heterostructure nanoarrays on Ni foam as efficient bifunctional electrocatalysts for overall water splitting

Low loading of Pt on MoB Constructed by microwave Quasi-solid approach with solvent Regulation for hydrogen evolution reaction

The interaction between metal nanoclusters and the carrier can enhance the electron transfer rate to optimize the hydrogen evolution reaction (HER) performance, but the common synthesis approaches often lead to metal particle agglomeration, and then blocking active sites. Herein, highly-dispersed Pt nanoclusters supported onto molybdenum boride (MoB) is developed through microwave approach with various solvent to regulate the catalytic performance. The synthesized electrocatalyst with the addition of methanol (Pt/MoB-M) exhibits excellent electrocatalytic performance towards HER with low overpotential (13 mV at 10 mA cm-2), small Tafel slope (24 mV dec-1), and high mass activity (10.06 A/mgPt at 50 mV). This work presents a novel approach to prepare highly-efficient electrocatalysts for renewable energy-related applications of non-carbon supported low loading of precious metals.

Nitrogen-Doped CoP-Co2P-Supported Ru with Interconnected Channels through a Microwave Quasi-Solid Approach for Hydrogen Evolution Reaction over a Wide pH Range

Transition-metal phosphides (TMPs) have attracted extensive attention in energy-related fields, especially for electrocatalytic hydrogen evolution reaction (HER). However, it is imperative to develop a facile and time-consuming approach to prepare metal phosphides with satisfactory catalytic performance. Herein, nitrogen-doped CoP-Co2P decorated with Ru (Ru/N-CoP-Co2P) is synthesized (Ru/N-CoP-Co2P) through a hydrothermal route and following an ultrafast and simple microwave avenue within 20 s. The achieved Ru/N-CoP-Co2P possesses an interconnected porous morphology to expose abundant active sites and accelerate the mass transport. Moreover, N doping and Ru-supported decorated Ru/N-CoP-Co2P also play a key role in promoting the electrocatalytic activity. Therefore, the as-designed Ru/N-CoP-Co2P presents good catalytic performance for the HER in a wide pH range. Ru/N-CoP-Co2P merely needs overpotentials of 63, 100, and 65 mV to obtain 10 mA cm-2 in acidic, alkaline, and seawater electrolytes. This research provides a novel and efficient strategy for the synthesis of TMPs with highly efficient catalytic activity.

Regulating Mo-based alloy-oxide active interfaces for efficient alkaline hydrogen evolution assisted by hydrazine oxidation

Improving the efficiency of overall water splitting (OWS) is crucial due to the slow four-electron transfer process in the oxygen evolution reaction (OER). The coupling of the thermodynamically favorable hydrazine oxidation reaction (HzOR) with the hydrogen evolution reaction (HER) significantly boosts hydrogen production. A Ru-decorated MoNi/MoO2 micropillar (Ru-MoNi/MoO2) has been synthesized using a hydrothermal followed by reduction annealing. Benefiting from Ru moderating the active interface of Mo-based alloys/oxides and the unique one-dimensional micropillar morphology. The synthesized Ru-MoNi/MoO2 exhibits outstanding bifunctional activity for HER and HzOR, achieving 10 mA cm-2 at merely -13 mV and -34 mV in 1 M KOH and 1 M KOH + 0.5 M N2H4, respectively. Notably, with Ru-MoNi/MoO2 in a dual-electrode setup, only 0.57 V is needed to achieve 50 mA cm-2, demonstrating good stability and facilitating hydrazine-assisted water splitting (OHzS). This work offers insights into the modulation of alloy/metal oxide active interfaces, contributing to the development of efficient bifunctional catalysts for HER and HzOR.

Oxygen-deficient tungsten oxide inducing electron and proton transfer: Activating ruthenium sites for hydrogen evolution in wide pH and alkaline seawater

The design of electrocatalysts for the hydrogen evolution reaction (HER) that perform effectively across a broad pH spectrum is paramount. The efficiency of hydrogen evolution at ruthenium (Ru) active sites, often hindered by the kinetics of water dissociation in alkaline or neutral conditions, requires further enhancement. Metal oxides, due to superior electron dynamics facilitated by oxygen vacancies (OVS) and shifts in the Fermi level, surpass carbon-based materials. In particular, tungsten oxide (WO3) promotes the directed migration of electrons and protons which significantly activates the Ru sites. Ru/WO3-OV is prepared through a simple hydrothermal and low-temperature annealing process. The prepared catalyst achieves 10 mA cm-2 at overpotentials of 23 mV (1 M KOH), 36 mV (0.5 M H2SO4), 62 mV (1 M PBS), and 38 mV (1 M KOH + seawater). At an overpotential corresponding to 10 mA cm-2 in 1 M KOH and 1 M KOH + seawater, the mass activity of Ru/WO3-OV is about 7.7 and 7.86 times that of 20 wt% Pt/C. The improvement in activity and stability arises from electronic modifications attributed to metal-support interaction. This work offers novel insights for modulating the HER activity of Ru sites across a wide pH range.

Decoration of Ag nanoparticles on CoMoO4 rods for efficient electrochemical reduction of CO2

Hydrothermal and photoreduction/deposition methods were used to fabricate Ag nanoparticles (NPs) decorated CoMoO4 rods. Improvement of charge transfer and transportation of ions by making heterostructure was proved by cyclic voltammetry and electrochemical impedance spectroscopy measurements. Linear sweep voltammetry results revealed a fivefold enhancement of current density by fabricating heterostructure. The lowest Tafel slope (112 mV/dec) for heterostructure compared with CoMoO4 (273 mV/dec) suggested the improvement of electrocatalytic performance. The electrochemical CO2 reduction reaction was performed on an H-type cell. The CoMoO4 electrocatalyst possessed the Faraday efficiencies (FEs) of CO and CH4 up to 56.80% and 19.80%, respectively at  - 1.3 V versus RHE. In addition, Ag NPs decorated CoMoO4 electrocatalyst showed FEs for CO, CH4, and C2H6 were 35.30%, 11.40%, and 44.20%, respectively, at the same potential. It is found that CO2 reduction products shifted from CO/CH4 to C2H6 when the Ag NPs deposited on the CoMoO4 electrocatalyst. In addition, it demonstrated excellent electrocatalytic stability after a prolonged 25 h amperometric test at  - 1.3 V versus RHE. It can be attributed to a synergistic effect between the Ag NPs and CoMoO4 rods. This study highlights the cooperation between Ag NPs on CoMoO4 components and provides new insight into the design of heterostructure as an efficient, stable catalyst towards electrocatalytic reduction of CO2 to CO, CH4, and C2H6 products.

Synergistic Effects of Pyrrolic N/Pyridinic N on Ultrafast Microwave Synthesized Porous CoP/Ni2P to Boost Electrocatalytic Hydrogen Generation

Transition metal phosphides are ideal inexpensive electrocatalysts for water-splitting, but the catalytic activity still falls behind that of noble metal catalysts. Therefore, developing valid strategies to boost the electrocatalytic activity is urgent to promote large-scale applications. Herein, a microwave combustion strategy (20 s) is applied to synthesize N-doped CoP/Ni2P heterojunctions (N-CoP/Ni2P) with porous structure. The porous structure expands the specific surface area and accelerates the mass transport efficiency. Importantly, the pyrrolic N/pyridinic N content is adjusted by changing the amount of urea during the synthesis process and then optimizing the adsorption/desorption capacity for H*/OH* to enhance the catalyst activity. Then, the synthesized N-CoP/Ni2P exhibits small overpotentials of 111 and 133 mV for HER in acidic and alkaline electrolytes and 290 mV for OER in alkaline electrolytes. This work provides an original and efficient approach to the synthesis of porous metal phosphides.

Sulfur vacancy regulation and multipolarization of NixCo1S nanowires-decorated biotemplated structures to promote microwave absorption

It is a novel and practical method to use natural porous biomaterials as microwave absorber. In this study, Ni_xCo₁S nanowires (NWs)@diatomite (De) composites with one-dimensional (1D)-NWs and three-dimensional(3D)-De composites were prepared by a two-step hydrothermal method using De as template. The effective absorption bandwidth (EAB) of the composite reaches 6.16 GHz at 1.6 mm and 7.04 GHz at 4.1 mm, covering the entire Ku band, and the minimum reflection loss (RLmin) is less than -30 dB. The excellent absorption performance is mainly due to the bulk charge modulation provided by the 1D NWs and the extended microwave transmission path within the absorber, coupled with the high dielectric loss and magnetic loss of the metal-NWS after vulcanization. We present a high-value method that combines vulcanized 1D materials with abundant De to achieve the lightweight broadband efficient microwave absorption at the first time.

Synthesis of Urchin-like Ni@NP@NCP Composites with Three Solvothermal Systems for Highly Efficient Overall Seawater Splitting

In this work, an urchin-like Ni@Ni₂P@NiCoP (Ni@NP@NCP) composite was prepared on nickel foam by a simple hydrothermal treatment process. Using the prepared NiO nanosheets as templates, the NiCo precursor was prepared in the presence of three solvothermal systems of water/dimethylformamide (DMF)/dimethyl sulfoxide (DMSO) by the hydrothermal process. After mixing and calcining with sodium hypophosphite under a nitrogen atmosphere at a high temperature for phosphating, an urchin-like Ni@NP@NCP(F/SO/H) nanostructured catalyst was obtained with superior hydrogen evolution and oxygen evolution performance. To further explore their efficiency in seawater splitting. Ni@NP@NCP(F/SO/H) composites were used as the cathode and anode of an electrolytic cell, which delivered 1.822 V potential at 300 mA cm^-2 in simulated seawater (1 M KOH and 0.5 M NaCl). This may provide an effective way of developing clean energy.

Engineering cobalt molybdate nanosheet arrays with phosphorus-modified nickel as heterogeneous electrodes for highly-active energy-saving water splitting

Electrochemical urea electrolysis has been regarded as a promising strategy to replace traditional water-splitting technology to achieve hydrogen fuel due to its cost savings and high energy efficiency. Designing efficient bifunctional electrocatalysts easily is important but still faces significant challenges. Herein, an interface engineering strategy is used to construct a hybrid material by coupling cobalt molybdate (CoMoO₄) nanosheet arrays with phosphorus-modified nickel (P-Ni) particles on copper foam (P-Ni@CoMoO₄/CF) through the hydrothermal and in-situ electrodeposition process. Benefiting from the abundant catalytic active sites, low charge transfer resistance, and synergistic coupling effect, the optimal P-Ni@CoMoO₄/CF electrocatalyst presents a superior bifunctional activity for urea oxidation reaction (UOR) and hydrogen evolution reaction (HER). In detail, a small overpotential of 125 mV and a low potential of 1.36 V is required to attain the current density of 100 mA cm^-2 for HER and UOR, respectively. In the process of urea electrolysis, the P-Ni@CoMoO₄/CF-based electrolyzer provides a current density of 100 mA cm^-2 with an overall voltage of 1.50 V, about 170 mV less than that in a traditional water electrolyzer. The high performance of P-Ni@CoMoO₄/CF outperforms many recently reported electrodes, suggesting its promising application in energy-saving hydrogen production. Our work proposes a novel idea for the rational design and exploitation of low-cost and robust bifunctional electrodes for electrocatalysis.

Metal-Organic Framework-Derived Hollow CoSx Nanoarray Coupled with NiFe Layered Double Hydroxides as Efficient Bifunctional Electrocatalyst for Overall Water Splitting

For effective hydrogen production by water splitting, it is essential to develop earth-abundant, highly efficient, and durable electrocatalysts. Herein, the authors report a bifunctional electrocatalyst composed of hollow CoS_x and Ni-Fe based layered double hydroxide (NiFe LDH) nanosheets for efficient overall water splitting (OWS). The optimized heterostructure is obtained by the electrodeposition of NiFe LDH nanosheets on metal-organic framework-derived hollow CoS_x nanoarrays, which are supported on nickel foam (H-CoS_x @NiFe LDH/NF). The unique structure of the hybrid material not only provides ample active sites, but also facilitates electrolyte penetration and gas release during the reactions. Additionally, the strong coupling and synergy between the hydrogen evolution reaction (HER) active CoS_x and the oxygen evolution reaction (OER) active NiFe LDH gives rise to the excellent bifunctional properties. Consequently, H-CoS_x @NiFe LDH/NF exhibits remarkable HER and OER activities with overpotentials of 95 and 250 mV, respectively at 10 mA cm^-2 in 1.0 M KOH. Even at 1.0 A cm^-2 , the electrode requires small overpotentials of 375 mV (for HER) and 418 mV (for OER), respectively. An electrolyzer based on H-CoS_x @NiFe LDH/NF demonstrates a low cell voltage of 1.98 V at a current density of 300 mA cm^-2 and good durability for 100 h in OWS application.

Mesoporous cobalt ferrite phosphides/reduced graphene oxide as highly effective electrocatalyst for overall water splitting

Although the electrochemical production of hydrogen has been considered as a promising strategy to obtain the sustainable resources, the sluggish kinetics of anodic oxygen evolution reaction (OER) hindered the sustainable energy development. Herein, we design mesoporous cobalt ferrite phosphides hybridized on reduced graphene oxide (rGO) as a highly efficient bifunctional catalyst through a simple nanocasting method. The hybrid catalyst possesses the abundant interface, which provides the large active sites, as well as the hybrid rGO accelerates the electron exchange and ion diffusion. Moreover, the mesoporous structure not only prevents the aggregation of actives sites, but also benefits for the rapid escape of bubbles during catalytical process, which can significantly improve the catalytic performance. Consequently, the resulting mCo_0.5Fe_0.5P/rGO shows superior catalytic performance with a low overpotential of 250 mV at a current density of 10 mA cm^-2 for OER and outstanding long-term stability. More importantly, an electrolyzer with mCo_0.5Fe_0.5P/rGO as both anode and cathode catalysts shows a low voltage of 1.66 V to afford a current density of 10 mA cm^-2. This work offers a new route for designing the highly efficient OER and overall water splitting electrocatalysts.