Transition metal oxide nanoparticles as efficient catalysts in oxidation reactions

Transforming wastewater treatment: Recent advancements in Catalytic Wet Air Oxidation with pillared clay catalysts for phenol remediation

Catalytic Wet Air Oxidation (CWAO) has recently been recognized as a promising technique for degrading persistent organic pollutants, such as phenol, in wastewater. Among various catalysts, Pillared Interlayer Clays (PILCs) stand out due to their high specific surface area and porous nature. This review delves into the latest progress in CWAO processes utilizing PILCs for the degradation of organic contaminants such as phenol in wastewater. It meticulously assesses the synthesis of PILCs, and their structural properties, including monolithic forms, to understand their effect on catalyst efficiency. Key insights into how these attributes affect the phenol degradation rate and the CWAO process's stability are discussed, providing crucial direction for enhancing catalyst performance. The review highlights the significance of choosing catalysts that offer a balance between cost-efficiency and operational efficacy under mild conditions. The recent results are reported, summarized, and compared, thus proving the feasibility of using PILCs as promising materials for phenol removal. The reaction parameters, phenol conversion, and degradation mechanisms are highlighted. The catalytic efficiency of PILCs was significantly affected by the synthesis methods and reaction parameters, and outperformed most costly catalysts. PILCs are highlighted as especially advantageous catalysts, offering strong performance at lower costs, which boosts the up-scaling opportunities of CWAO methods. This analysis also points out research gaps and proposes directions for future studies, such as exploring innovative PILC synthesis methods to improve their catalytic effectiveness and durability further. It stresses the need to incorporate environmental and sustainability considerations into catalyst design and selection, aligning with the principles of green chemistry in wastewater treatment. Finally, we conclude that proposing new directions for PILCs in CWAO in further naturally-based surface modifications, is also a promising approach for PILCs to perform more efficiently.

Amplifying Photochromic Response in Tungsten Oxide Films with Titanium Oxide and Polyvinylpyrrolidone

Tungsten oxide (WO3) is known for its photochromic properties, making it useful for smart windows, displays, and sensors. However, its small bandgap leads to rapid recombination of electron-hole pairs, resulting in poor photochromic performance. This study aims to enhance the photochromic properties of WO3 by synthesizing hexagonal tungsten oxide via hydrothermal synthesis, which increases surface area and internal hydrates. Titanium oxide (TiO2) was adsorbed onto the tungsten oxide to inject additional charges and reduce electron-hole recombination. Additionally, polyvinylpyrrolidone (PVP) was used to improve dispersion in organic solvents, allowing for the fabrication of high-quality films using the doctor blade method. Characterization confirmed the enhanced surface area, crystal structure, and dispersion stability. Reflectance and transmittance measurements demonstrated significant improvements in photochromic properties due to the composite structure. These findings suggest that the introduction of TiO2 and PVP to tungsten oxide effectively enhances its photochromic performance, broadening its applicability in various advanced photochromic applications.

Reusable Magnetite Nanoparticle (Fe3O4 NP) Catalyst for Selective Oxidation of Alcohols under Microwave Irradiation

Iron oxide nanoparticles (NPs) are nontoxic and abundant materials which have long been investigated as reusable catalysts in oxidation reactions, but their use so far has been hampered by a low selectivity. Here, unsupported iron oxide NPs have been found to successfully catalyze the microwave-assisted oxidation of primary and secondary alcohols to their respective aldehydes and ketones with a high selectivity when N-methylmorpholine N-oxide was used as the terminal oxidant. The crystalline phase and size of the iron-based catalyst have a drastic effect on its activity, with small magnetite (Fe3O4) NPs being the optimal catalyst for this reaction. The nanocatalyst could be easily recovered by magnetoseparation and successfully recycled four times without any need for special pretreatment or reactivation step and with a minimal loss of activity. The subsequent loss of activity was attributed to the transition from magnetite (Fe3O4) to maghemite (γ-Fe2O3), as confirmed by X-ray diffraction, Fourier transform infrared, and X-ray absorption near-edge spectroscopy. The nanocatalyst could then be reactivated by the high-temperature microwave treatment and used again for the microwave-assisted oxidation reaction.

Recent trends and advancement in metal oxide nanoparticles for the degradation of dyes: synthesis, mechanism, types and its application

Synthetic dyes play a crucial role in our daily lives, especially in clothing, leather accessories, and furniture manufacturing. Unfortunately, these potentially carcinogenic substances are significantly impacting our water systems due to their widespread use. Dyes from various sources pose a serious environmental threat owing to their persistence and toxicity. Regulations underscore the urgency in addressing this problem. In response to this challenge, metal oxide nanoparticles such as titanium dioxide (TiO2), zinc oxide (ZnO), and iron oxide (Fe3O4) have emerged as intriguing options for dye degradation due to their unique characteristics and production methods. This paper aims to explore the types of nanoparticles suitable for dye degradation, various synthesis methods, and the properties of nanoparticles. The study elaborates on the photocatalytic and adsorption-desorption activities of metal oxide nanoparticles, elucidating their role in dye degradation and their application potential. Factors influencing degradation, including nanoparticle properties and environmental conditions, are discussed. Furthermore, the paper provides relevant case studies, practical applications in water treatment, and effluent treatment specifically in the textile sector. Challenges such as agglomeration, toxicity concerns, and cost-effectiveness are acknowledged. Future advancements in nanomaterial synthesis, their integration with other materials, and their impact on environmental regulations are potential areas for development. In conclusion, metal oxide nanoparticles possess immense potential in reducing dye pollution, and further research and development are essential to define their role in long-term environmental management.

Green, Solvent-Free Mechanochemical Synthesis of Nano Ag2O/MnO2/N-Doped Graphene Nanocomposites: An Efficient Catalyst for Additive-Base-Free Aerial Oxidation of Various Kinds of Alcohols

Herein, we report a solvent-less, straightforward, and facile mechanochemical technique to synthesize nanocomposites of Ag2O nanoparticles-doped MnO2, which is further codoped with nitrogen-doped graphene (N-DG) [i.e., (X %)N-DG/MnO2-(1% Ag2O)] using physical milling of separately prepared N-DG and Ag2O NPs-MnO2 annealed at 400 °C over an eco-friendly ball-mill process. To assess the efficiency in terms of catalytic performance of the nanocomposites, selective oxidation of benzyl alcohol (BlOH) to benzaldehyde (BlCHO) is selected as a substrate model with an eco-friendly oxidizing agent (O2 molecule) and without any requirements for the addition of any harmful additives or bases. Various nanocomposites were prepared by varying the amount of N-DG in the composite, and the results obtained highlighted the function of N-DG in the catalyst system when they are compared with the catalyst MnO2-(1% Ag2O) [i.e., undoped catalyst] and MnO2-(1% Ag2O) codoped with different graphene dopants such as GRO and H-RG for alcohol oxidation transformation. The effects of various catalytic factors are systematically evaluated to optimize reaction conditions. The N-DG/MnO2-(1% Ag2O) catalyst exhibits premium specific activity (16.0 mmol/h/g) with 100% BlOH conversion and <99.9% BlCHO selectivity within a very short interval. The mechanochemically prepared N-DG-based nanocomposite displayed higher catalytic efficacy than that of the MnO2-(1% Ag2O) catalyst without the graphene dopant, which is N-DG in this study. A wide array of aromatic, heterocyclic, allylic, primary, secondary, and aliphatic alcohols have been selectively converted to respective ketones and aldehydes with full convertibility without further oxidation to acids over N-DG/MnO2-(1% Ag2O). Interestingly, it is also found that the N-DG/MnO2-(1% Ag2O) can be efficiently reused up to six times without a noteworthy decline in its effectiveness. The prepared nanocomposites were characterized using various analytical, microscopic, and spectroscopic techniques such as X-ray diffraction, thermogravimetric analysis, Fourier-transform infrared spectroscopy, Raman, field emission scanning electron microscopy, and Brunauer-Emmett-Teller.

Advancement in nanomaterials for environmental pollutants remediation: a systematic review on bibliometrics analysis, material types, synthesis pathways, and related mechanisms

Environmental pollution is a major issue that requires effective solutions. Nanomaterials (NMs) have emerged as promising candidates for pollution remediation due to their unique properties. This review paper provides a systematic analysis of the potential of NMs for environmental pollution remediation compared to conventional techniques. It elaborates on several aspects, including conventional and advanced techniques for removing pollutants, classification of NMs (organic, inorganic, and composite base). The efficiency of NMs in remediation of pollutants depends on their dispersion and retention, with each type of NM having different advantages and disadvantages. Various synthesis pathways for NMs, including traditional synthesis (chemical and physical) and biological synthesis pathways, mechanisms of reaction for pollutants removal using NMs, such as adsorption, filtration, disinfection, photocatalysis, and oxidation, also are evaluated. Additionally, this review presents suggestions for future investigation strategies to improve the efficacy of NMs in environmental remediation. The research so far provides strong evidence that NMs could effectively remove contaminants and may be valuable assets for various industrial purposes. However, further research and development are necessary to fully realize this potential, such as exploring new synthesis pathways and improving the dispersion and retention of NMs in the environment. Furthermore, there is a need to compare the efficacy of different types of NMs for remediating specific pollutants. Overall, this review highlights the immense potential of NMs for mitigating environmental pollutants and calls for more research in this direction.

Fast and novel multiwalled carbon nanotubes decorated with metal oxide nanoparticles for potentiometric detection of a prohibited medication in sports acebutolol hydrochloride

A straightforward approach for creating fast and novel potentiometric sensors that are modified with multi-walled nanotubes (MWCNTs) was described. The impact of the selective sensor's material was studied. The suggested sensors were successfully fabricated for instant and fast detection of the prohibited β-adrenoreceptor blocking agent acebutolol hydrochloride (AC) in commercial products. Acebutolol-phosphomolybdate (AC-PM) carbon paste sensor was formed by mixing AC and phosphomolybdic acid and graphite powder in the presence of o-nitrophenyl octyl ether (o-NPOE) as a plasticizing agent. The functionalized AC-PM-MWCNTs and AC-PM-MWCNTs-Al2O3 nanocomposite sensors were prepared and all parameters affecting the sensors' potential responses have been investigated as well as the green synthesis of Al2O3NPs has been characterized using various microscopic and spectroscopic techniques. AC-PM-MWCNTs and AC-PM-MWCNTs-Al2O3 nanocomposite sensors demonstrated linearity of 1.0 × 10-7-1.0 × 10-2 and 1.0 × 10-8-1.0 × 10-2 mol L-1, respectively with regression equations -53.571x + 423.24 (r = 0.999) and -57.107x + 518.54 (r = 0.999). It also revealed excellent selectivity and sensitivity for the determination and quantification of AC. The developed potentiometric system was suitable for the determination of AC in bulk powder and commercial products.

Recent Developments on the Catalytic and Biosensing Applications of Porous Nanomaterials

Nanoscopic materials have demonstrated a versatile role in almost every emerging field of research. Nanomaterials have come to be one of the most important fields of advanced research today due to its controllable particle size in the nanoscale range, capacity to adopt diverse forms and morphologies, high surface area, and involvement of transition and non-transition metals. With the introduction of porosity, nanomaterials have become a more promising candidate than their bulk counterparts in catalysis, biomedicine, drug delivery, and other areas. This review intends to compile a self-contained set of papers related to new synthesis methods and versatile applications of porous nanomaterials that can give a realistic picture of current state-of-the-art research, especially for catalysis and sensor area. Especially, we cover various surface functionalization strategies by improving accessibility and mass transfer limitation of catalytic applications for wide variety of materials, including organic and inorganic materials (metals/metal oxides) with covalent porous organic (COFs) and inorganic (silica/carbon) frameworks, constituting solid backgrounds on porous materials.

Influence of the Preparation Method on the Structural, Morphological and Dielectric Properties of FeNbO4 Ceramics

In this work, iron niobate (FeNbO₄) was prepared via two processes based on the sol-gel method: colloidal gel and polymeric gel. The obtained powders were submitted to heat treatments at different temperatures based on the results obtained via differential thermal analysis. The structures of the prepared samples were characterized via X-ray diffraction and the morphology was characterized via scanning electron microscopy. The dielectric measurements were performed in the radiofrequency region using the impedance spectroscopy technique and in the microwave range using the resonant cavity method. The influence of the preparation method was noticeable in the structural, morphological and dielectric properties of the studied samples. The polymeric gel method promoted the formation of monoclinic and orthorhombic iron niobate at lower temperatures. The differences in the samples' morphology were also remarkable, both in the size and shape of the grains. The dielectric characterization revealed that the dielectric constant and the dielectric losses had the same order of magnitude and similar trends. A relaxation mechanism was identified in all the samples.

Oxidation of Methanol and Dichloromethane on TiO2-CeO2-CuO, TiO2-CeO2 and TiO2-CuO@VUKOPOR®A Ceramic Foams

The application-attractive form of TiO₂, CeO₂ and CuO-based open-cell foam supported catalysts was designed to investigate their catalytic performance in oxidation of two model volatile organic compounds-methanol and dichloromethane. TiO₂-CeO₂, TiO₂-CuO and TiO₂-CeO₂-CuO catalysts as thin films were deposited on VUKOPOR^®A ceramic foam using a reverse micelles-controlled sol-gel method, dip-coating and calcination. Three prepared catalytic foams were investigated via light-off tests in methanol and dichloromethane oxidation in the temperature range of 45-400 °C and 100-500 °C, respectively, at GHSV of 11, 600 h^-1, which fits to semi-pilot/industrial conditions. TiO₂-CuO@VUKOPOR^®A foam showed the best catalytic activity and CO₂ yield in methanol oxidation due to its low weak Lewis acidity, high weak basicity and easily reducible CuO species and proved good catalytic stability within 20 h test. TiO₂-CeO₂-CuO@VUKOPOR^®A foam was the best in dichloromethane oxidation. Despite of its lower catalytic activity compared to TiO₂-CeO₂@VUKOPOR^®A foam, its highly-reducible -O-Cu-Ce-O- active surface sites led to the highest CO₂ yield and the highest weak Lewis acidity contributed to the highest HCl yield. This foam also showed the lowest amount of chlorine deposits.

Fourth-generation glucose sensors composed of copper nanostructures for diabetes management: A critical review

More than five decades have been invested in understanding glucose biosensors. Yet, this immensely versatile field has continued to gain attention from the scientific world to better understand and diagnose diabetes. However, such extensive work done to improve glucose sensing devices has still not yielded desirable results. Drawbacks like the necessity of the invasive finger-pricking step and the lack of optimization of diagnostic interventions still need to be considered to improve the testing process of diabetic patients. To upgrade the glucose-sensing devices and reduce the number of intermediary steps during glucose measurement, fourth-generation glucose sensors (FGGS) have been introduced. These sensors, made using robust electrocatalytic copper nanostructures, improve diagnostic efficiency and cost-effectiveness. This review aims to present the essential scientific progress in copper nanostructure-based FGGS in the past 10 years (2010 to present). After a short introduction, we presented the working principles of these sensors. We then highlighted the importance of copper nanostructures as advanced electrode materials to develop reliable real-time FGGS. Finally, we cover the advantages, shortcomings, and prospects for developing highly sensitive, stable, and specific FGGS.

An efficient CuO/rGO/TiO2 photocatalyst for the synthesis of benzopyranopyrimidine compounds under visible light irradiation

This study reports the synthesis of CuO/rGO/TiO2 in coupling reaction under visible light irradiation. Its photocatalytic performance was explored in a pseudo 4-component and a domino reaction for the synthesis of benzopyranopyrimidine compounds. It can be recovered and recycled for 5 runs.

Atomic Resolution Electron Microscopy: A Key Tool for Understanding the Activity of Nano-Oxides for Biomedical Applications

Transition metal oxides constitute one of the most fruitful sources of materials with continuously increasing potential applications prompted by the expectations derived from the reduction of the particle size. The recent advances in transmission electron microscopy, because of the development of lenses, have made it possible to reach atomic resolution, which can provide answers regarding the performance of the transition metal nano-oxides. This critical information is related not only to the ability to study their microstructural characteristics but also their local composition and the oxidation state of the transition metal. Exploring these features is a well-known task in nano-oxides for energy and electronic technologies, but they are not so commonly used for elucidating the activity of these oxides for biomedical applications. Nevertheless, the identification at the atomic level of a certain dopant or the unambiguous determination of the oxidation state of a transition metal in a nano-oxide can be important questions to be answered in a certain biomedical application. In this work, we provide several examples in transition metal nano-oxides to show how atomic-resolution electron microscopy can be a key tool for its understanding.

Low-Temperature H2 Reduction of Copper Oxide Subnanoparticles

Subnanoparticles (SNPs) with sizes of approximately 1 nm are attractive for enhancing the catalytic performance of transition metals and their oxides. Such SNPs are of particular interest as redox-active catalysts in selective oxidation reactions. However, the electronic states and oxophilicity of copper oxide SNPs are still a subject of debate in terms of their redox properties during oxidation reactions for hydrocarbons. In this work, in situ X-ray absorption fine structure (XAFS) measurements of Cu₂₈ O_x SNPs, which were prepared by using a dendritic phenylazomethine template, during temperature-programmed reduction (TPR) with H₂ achieved lowering of the temperature (T₅₀ =138 °C) reported thus far for the Cu^II →Cu^I reduction reaction because of Cu-O bond elongation in the ultrasmall copper oxide particles.

Photoprotective activity of zirconia nanoparticles

The increasing incidence of diseases caused by the harmful effects of UV radiation in skin, predominantly skin cancer, induce the search for more efficient photoprotector agents. Nowadays, titanium dioxide (TiO₂) and zinc oxide (ZnO) are the most widely used photoprotectors and therefore form the main components of commercially available sunscreens. Although the outstanding efficiency in absorbing and scattering UV radiation, mainly as nanoparticles, recent studies have raised concerns regarding the safe use of these nanoparticles, especially due to their high generation of reactive oxygen species (ROS). Thereby, this work focus on the evaluation of the photoprotective activity of zirconia nanoparticles (ZrO₂ NPs) and their cytotoxicity study in the presence and absence of UV irradiation. The ZrO₂ NPs were synthesized by hydrothermal method and their hydrodynamic diameter, Zeta potential and colloidal stability were characterized by dynamic light scattering. The morphology and size were observed by transmission electron microscopy. The synthesis resulted in ZrO₂ NPs with 50 nm of diameter and 56 nm of hydrodynamic diameter. The high colloidal stability was evidenced by the high value of Zeta potential (+48 mV) and low polydispersity index (0.09). The UV-vis spectrum of the ZrO₂ NPs in aqueous suspension showed an intense light scattering below 250 and a wide absorption band at 285 nm. The poor generation of ROS by ZrO₂ NPs was confirmed by the absence of photodegradation of methylene blue after long periods of irradiation. The in vitro assays performed with HaCaT cell line showed that the cell viability did not decrease in the absence of irradiation. However, after 24 h of incubation, the cell viability decreased under UV-irradiation in comparison with irradiated cells that were not incubated with ZrO₂ NPs. Notably, in these assays, the cells were incubated with the ZrO₂ NPs and after 24 h, they were replaced by fresh culture medium before the cell viability assay. Nevertheless, another in vitro assay was performed in order to evaluate the photoprotective activity of ZrO₂ NPs. The cells were irradiated in the presence of ZrO₂ NPs suspension. In this case, cell viability did not decrease even after long period of UV-irradiation and at higher concentration of ZrO₂ NPs. The present results showed that ZrO₂ NPs could be an interesting material to be used for skin photoprotection since they showed low cytotoxicity, absence of ROS generation and protection under UV irradiation. Additionally, the ZrO₂ NPs suspension was transparent as usually required for applications in sunscreens.

Preparation and characterization of a copper oxide nanoparticle-supported red-mud catalyst for liquid phase oxidation of ethyl benzene to acetophenone

In this study, liquid phase oxidation of ethyl benzene to acetophenone was widely investigated using a new recyclable supported catalyst of CuO nanoparticles impregnated over activated red-mud (CuO_AARM).

Oxidation-assisted alkaline precipitation of nanoparticles using gas-diffusion electrodes

By benchmarking gas-diffusion electrocrystallization against alkaline precipitation for the synthesis of (hydr)oxide nanoparticles, oxidation-assisted precipitation of magnetite nanoparticles was demonstrated.

Controllable Hydrothermal Synthesis and Photocatalytic Performance of Bi2MoO6 Nano/Microstructures

Bi2MoO6 with a tunable morphology was synthesized by a facile hydrothermal route using different surfactants, including nanosheet-assembled microspheres, smooth microspheres, nanoparticle aggregates and nanoparticles. The morphology, crystal structure and photocatalytic activity of as-obtained Bi2MoO6 were characterized by scanning electron microscopes (SEM), X-ray diffraction (XRD), photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) and UV–Vis spectrophotometer. Bi2MoO6 flower-like microspheres using cetyl-trimethyl-ammonium bromide (BET) as the surfactant exhibited much better photocatalytic activity than Bi2MoO6 with the other morphologies, with a degradation efficiency of 98.4%. It can be summarized that the photocatalytic activity of Bi2MoO6 samples depends on their morphology and composition.

Non-enzymatic electrochemical approaches to cholesterol determination

Cholesterol plays a vital role in a human body. It is known as one of the most important sterols, because it forms cell walls and participates in signal transduction. Moreover, cholesterol was recognized as biomarker of cardiovascular diseases and of some metabolic disorders. As a result, cholesterol blood levels should be controlled in a variety of diseases such as ischemic heart disease, cerebrovascular ischemia, stroke, hypertension, type II diabetes, and many others. Hence, the accurate cholesterol quantification plays an important role in diagnosis and treatment of these diseases. Modern voltammetric and amperometric methods are increasingly used for cholesterol monitoring. Consequently, the problem of electrode fabrication for cholesterol detection has high importance for clinical tests. Novel electrode materials initiated the fast growth of electrochemical biosensors. Biomaterials are still the most frequently used modifiers for cholesterol sensors due to their high selectivity. However, biomaterials have low stability complicating their practical applications. This fact is crucial for analytical parameters such as limit of detection (LOD) and sensitivity. Therefore, nanomaterials are used to eliminate disadvantages of biomaterials and to improve sensors performance by increasing the electrode surface, conductivity and sensitivity. This review is focused on the use of non-enzymatic electrodes for cholesterol quantification and on different approaches to their fabrication. Firstly, the necessity and role of modifier is discussed. Afterwards, the advantages and disadvantages of currently used modifiers are critically compared together with all aspects and approaches to sensors fabrication. Finally, the prospects of non-enzymatic electrodes application for cholesterol sensors engineering are summarised.

Highly Selective Oxidation of Organic Sulfides by a Conjugated Polymer as the Photosensitizer for Singlet Oxygen Generation

A cationic conjugated polyelectrolyte PPET3-N2 was used as a photosensitizer for photocatalytic oxidation of organic sulfides, including thioanisole, ethyl phenyl sulfide, 4-methylphenyl methyl sulfide, etc., to form sulfoxides with good yields and high selectivity. Oxidation reactions were performed in both batch and microfluidic reactors, where the microfluidic reactor can significantly promote the conversion of photocatalytic oxidation reaction to over 98% in about 8 min. Further studies of the photocatalytic oxidation of the antitumor drug ricobendazole in the microfluidic reactor demonstrate the potential application of the polymer material in organic reactions given its high selectivity, good efficiency, and operation convenience.

Selective Photocatalytic Oxidation of 5-HMF in Water over Electrochemically Synthesized TiO2 Nanoparticles

TiO2 nanoparticles were prepared via an electrochemical method using pulse alternating current and applied in the photocatalytic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformylfuran (DFF). Its physicochemical properties were characterized by SEM, HRTEM, XRD, and BET methods. The effect of scavenger and UVA light intensity was studied. The results revealed that electrochemically synthesized TiO2 nanoparticles exhibit higher DFF selectivity in the presence of methanol (up to 33%) compared with commercial samples.

Development of Nanosized Mn3O4-Co3O4 on Multiwalled Carbon Nanotubes for Cathode Catalyst in Urea Fuel Cell

Double-oxide Mn3O4-Co3O4 nanoparticles were synthesized and anchored on multiwalled carbon nanotubes (MWCNTs) via a single-step solvothermal method. The largest specific area (99.82 m2g−1) of the catalyst was confirmed via a nitrogen adsorption isotherm. Furthermore, the uniform coating of the Mn3O4-Co3O4 nanoparticles on the surface of the MWCNTs was observed via scanning electron microscopy and transmission electron microscopy; the uniform coating provided an effective transport pathway during the electrocatalytic activities. The rotating disk electrode and rotating ring disk electrode measurements indicated that the electron transfer number was 3.96 and the evolution of H2O2 was 2%. In addition, the Mn3O4-Co3O4/MWCNT catalyst did not undergo urea poisoning and remained stable in an alkaline solution. Conversely, commercial Pt/C could not withstand urea poisoning for long. The performance cell achieved a power density of 0.4226 mW cm−2 at 50 °C. Therefore, Mn3O4-Co3O4/MWCNT is an efficient and inexpensive noble-metal-free cathodic catalyst for direct urea fuel cells.

Selective Catalytic Oxidation of Benzyl Alcohol by MoO2 Nanoparticles

Selective oxidation of benzyl alcohol to benzaldehyde was carried out with MoO2 nanoparticles (MoO2 NPs). MoO2 NPs were synthesized by two different approaches and characterized by several techniques. The synthesis was done by a hydrothermal procedure using ethylenediamine and either Fe2O3 or hydroquinone. In the latter case, an additional calcination step under N2 was performed to eliminate passivating agents at the surface of the nanoparticles. The synthesized nanocatalysts showed similar catalytic properties, being efficient catalysts in the oxidation of benzyl alcohol. High substrate conversion and product selectivity were achieved under all tested conditions. Studies were conducted using two different oxidants: tert-butyl hydroperoxide and hydrogen peroxide, in our continuous effort to obtain more efficient catalysts for more sustainable catalytic processes. When H2O2 was used as the oxidant, 94% yield was achieved with 100% selectivity for benzaldehyde, which was a very promising result to undergo other studies with this system. Moreover, to elucidate some aspects of the reaction mechanism, a study was conducted, and it was possible to conclude that the reaction undergoes, to some extent, through a radical mechanism with both oxidants.

Unraveling the structural stability and the electronic structure of ThO2 clusters

Unraveling the correlations between the geometry, the relative energy and the electronic structure of actinide oxide nanostructures is crucial for a better control of their size, shape and properties.

Magnetic Nanoparticle Supported Ionic Liquid Phase Catalyst for Oxidation of Alcohols

A new magnetic nanoparticle supported ionic liquid phase (SILP) catalyst containing perruthenate anions was prepared by a multistep procedure. The various analytical techniques such as FT-IR spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, thermogravimetric analysis, energy dispersive X-ray analysis, and vibrating sample magnetometer analysis ascertained the successful formation of catalyst. The performance of a magnetically retrievable SILP catalyst was evaluated in the selective oxidation of alcohols. The split test and leaching studies of the SILP catalyst confirmed its heterogeneous nature. In addition, the reusability potential of SILP catalyst was also investigated which revealed its robust activity up to six consecutive cycles.

Recent advances in the biotoxicity of metal oxide nanoparticles: Impacts on plants, animals and microorganisms

The contact between metal oxide nanoparticles (NPs) and human is more and more close with their wide applications. The inputs of metal oxide NPs to the environment are also growing every year, which causes potential environmental and human health risks. They are toxic to animals, microorganisms and plants at high concentrations, and they show different mechanisms of toxicity to different species. In addition, under complex environmental conditions, their toxic effects are often unpredictable. We have integrated the recent studies on the biotoxicity of metal oxide NPs from 2015-present, and clarified their toxic mechanism, as well as the toxic harm. It lays a foundation for further studying the toxicity and ecological risk of metal oxide NPs.

Novel mesoporous MnO2/SnO2 nanomaterials synthesized by ultrasonic-assisted co-precipitation method and their application in the catalytic decomposition of hydrogen peroxide

Novel mesoporous MnO₂/SnO₂ catalysts were successfully synthesized via traditional and ultrasonic co-precipitation methods. Moreover, their catalytic efficiencies were evaluated in decomposition of hydrogen peroxide (H₂O₂). Interestingly, it was found that the mixing of MnO₂ with SnO₂ catalyst led to a significant improvement in their catalytic efficiencies compared with single oxides catalysts. However, the influence of ultrasonic power and irradiation time on MnO₂/SnO₂ nanomaterials were compared to get optimum synthetic condition. Subsequently, the catalysts were characterized by X-ray diffraction (XRD), N₂ adsorption-desorption analysis and high-resolution transmission electron microscopy (HR-TEM). Results represented that the effect of ultrasonic power and irradiation time on MnO₂/SnO₂ catalysts exerted a great influence on the BET surface area and average particle diameter. Furthermore, the results showed that the best catalytic efficiency was obtained for the mesoporous MnO₂/SnO₂ catalyst which is sonicated at power of 60% for 30 min as optimum conditions. Finally, the outcomes appeared that the catalysts synthesized by ultrasonic co-precipitation method were more efficient than those synthesized by traditional co-precipitation in catalyzing H₂O₂ decomposition.