Highly efficient click labeling using 2-[¹⁸F]fluoroethyl azide and synthesis of an ¹⁸FN-hydroxysuccinimide ester as conjugation agent

[18F]Tosyl fluoride as a versatile [18F]fluoride source for the preparation of 18F-labeled radiopharmaceuticals

Positron emission tomography (PET) is an in vivo imaging technology that utilizes positron-emitting radioisotope-labeled compounds as PET radiotracers that are commonly used in clinic and in various research areas, including oncology, cardiology, and neurology. Fluorine-18 is the most widely used PET-radionuclide and commonly produced by proton bombardment of ¹⁸O-enriched water in a cyclotron. The [¹⁸F]fluoride thus obtained generally requires processing by azeotropic drying in order to completely remove H₂O before it can be used for nucleophilic radiofluorination. In general, the drying step is important in facilitating the radiofluorination reactions and the preparation of ¹⁸F-labeled PET radiotracers. In this communication, we have demonstrated the feasibility of using [¹⁸F]tosyl fluoride ([¹⁸F]TsF) as a versatile [¹⁸F]fluoride source for radiofluorination to bypass the azeotropic drying step, and we have developed a continuous flow solid-phase radiosynthesis strategy to generate [¹⁸F]TsF in a form that is excellent for radiofluorination. [¹⁸F]TsF shows high reactivity in radiofluorination and provides the features suitable for preparing PET radiotracers on a small scale and exploring novel radiolabeling technologies. Thus, using [¹⁸F]TsF as a [¹⁸F]fluoride source is a promising strategy that facilitates radiofluorination and provides a convenient and efficient solution for the preparation of ¹⁸F-labeled radiopharmaceuticals that is well matched to the emerging trends in PET imaging technologies.

Imaging of the calcium activated potassium channel 3.1 (KCa 3.1) in vivo using a senicapoc-derived positron emission tomography tracer

The calcium-activated potassium channel 3.1 (K_Ca 3.1) is overexpressed in many tumor entities and has predictive power concerning disease progression and outcome. Imaging of the K_Ca 3.1 channel in vivo using a radiotracer for positron emission tomography (PET) could therefore establish a potentially powerful diagnostic tool. Senicapoc shows high affinity and excellent selectivity toward the K_Ca 3.1 channel. We have successfully pursued the synthesis of the ¹⁸ F-labeled derivative [¹⁸ F]3 of senicapoc using the prosthetic group approach with 1-azido-2-[¹⁸ F]fluoroethane ([¹⁸ F]6) in a "click" reaction. The biological activity of the new PET tracer was evaluated in vitro and in vivo. Inhibition of the K_Ca 3.1 channel by 3 was demonstrated by patch clamp experiments and the binding pose was analyzed by docking studies. In mouse and human serum, [¹⁸ F]3 was stable for at least one half-life of [¹⁸ F]fluorine. Biodistribution experiments in wild-type mice were promising, showing rapid and predominantly renal excretion. An in vivo study using A549-based tumor-bearing mice was performed. The tumor signal could be delineated and image analysis showed a tumor-to-muscle ratio of 1.47 ± 0.24. The approach using 1-azido-2-[¹⁸ F]fluoroethane seems to be a good general strategy to achieve triarylacetamide-based fluorinated PET tracers for imaging of the K_Ca 3.1 channel in vivo.

[18F]FET-βAG-TOCA: The Design, Evaluation and Clinical Translation of a Fluorinated Octreotide

The success of Lutathera™ ([¹⁷⁷Lu]Lu-DOTA-TATE) in the NETTER-1 clinical trial as a peptide receptor radionuclide therapy (PRRT) for somatostatin receptor expressing (SSTR) neuroendocrine tumours (NET) is likely to increase the demand for patient stratification by positron emission tomography (PET). The current gold standard of gallium-68 radiolabelled somatostatin analogues (e.g., [⁶⁸Ga]Ga-DOTA-TATE) works effectively, but access is constrained by the limited availability and scalability of gallium-68 radiopharmaceutical production. The aim of this review is three-fold: firstly, we discuss the peptide library design, biological evaluation and clinical translation of [¹⁸F]fluoroethyltriazole-βAG-TOCA ([¹⁸F]FET-βAG-TOCA), our fluorine-18 radiolabelled octreotide; secondly, to exemplify the potential of the 2-[¹⁸F]fluoroethylazide prosthetic group and copper-catalysed azide-alkyne cycloaddition (CuAAC) chemistry in accessing good manufacturing practice (GMP) compatible radiopharmaceuticals; thirdly, we aim to illustrate a framework for the translation of similarly radiolabelled peptides, in which in vivo pharmacokinetics drives candidate selection, supported by robust radiochemistry methodology and a route to GMP production. It is hoped that this review will continue to inspire the development and translation of fluorine-18 radiolabelled peptides into clinical studies for the benefit of patients.

An improved automated radiosynthesis of [18F]FET-βAG-TOCA

The fluorine-18 radiolabelled octreotide [¹⁸F]FET-βAG-TOCA has been evaluated clinically for positron emission tomography (PET) imaging of neuroendocrine tumours (NETs). An improved automated radiosynthesis using “click” chemistry (CuAAC) and the 2-[¹⁸F]fluoroethylazide prosthetic group is reported and with minimal adaptation, may be used for radiolabelling other peptides.

[18F]Fluoroalkyl azides for rapid radiolabeling and (Re)investigation of their potential towards in vivo click chemistry

In recent years, radiofluorinated alkyl azides have been reported for click radiolabeling and pretargeted PET imaging, but only little is known about the biodistribution and metabolism of these compounds. In this work, we present a significantly improved procedure for the synthesis of [¹⁸F]fluoroethyl azide and reinvestigated this radiolabeled probe in detail showing poor stability and very restricted suitability for in vivo application. Therefore, modified low-molecular-weight [¹⁸F]fluoroalkyl azides were developed. Propargyl-tagged endomorphin-1 (as model compound) was successfully radiolabeled in high yield and short reaction time making these probes useful and efficient bioorthogonal tools for rapid radiolabeling. Biodistribution, pharmacokinetics and in vivo stability were studied by preclinical PET/MR scanning and metabolite analysis. The results of this study revealed only limited applicability of [¹⁸F]fluoroalkyl azides for in vivo application.

Radiosynthesis and biological evaluation of 18F-labeled 4-anilinoquinazoline derivative (18F-FEA-Erlotinib) as a potential EGFR PET agent

Epidermal growth factor receptor (EGFR) has gained significant attention as a therapeutic target. Several EGFR targeting drugs (Gefitinib and Erlotinib) have been approved by US Food and Drug Administration (FDA) and have received high approval in clinical treatment. Nevertheless, the curative effect of these medicines varied in many solid tumors because of the different levels of expression and mutations of EGFR. Therefore, several PET radiotracers have been developed for the selective treatment of responsive patients who undergo PET/CT imaging for tyrosine kinase inhibitor (TKI) therapy. In this study, a novel fluorine-18 labeled 4-anilinoquinazoline based PET tracer, 1N-(3-(1-(2-¹⁸F-fluoroethyl)-1H-1,2,3-triazol-4-yl)phenyl)-6,7-bis(2-methoxyethoxy)quinazolin-4-amine (¹⁸F-FEA-Erlotinib), was synthesized and biological evaluation was performed in vitro and in vivo. ¹⁸F-FEA-Erlotinib was achieved within 50min with over 88% radiochemical yield (decay corrected RCY), an average specific activity over 50GBq/μmol, and over 99% radiochemical purity. In vitro stability study showed no decomposition of ¹⁸F-FEA-Erlotinib after incubated in PBS and FBS for 2h. Cellular uptake and efflux experiment results indicated the specific binding of ¹⁸F-FEA-Erlotinib to HCC827 cell line with EGFR exon 19 deletions. In vivo, Biodistribution studies revealed that ¹⁸F-FEA-Erlotinib exhibited rapid blood clearance both through hepatobiliary and renal excretion. The tumor uptake of ¹⁸F-FEA-Erlotinib in HepG2, HCC827, and A431 tumor xenografts, with different EGFR expression and mutations, was visualized in PET images. Our results demonstrate the feasibility of using ¹⁸F-FEA-Erlotinib as a PET tracer for screening EGFR TKIs sensitive patients.

A novel versatile precursor suitable for 18 F-radiolabeling via "click chemistry"

As an effort to improve ¹⁸ F-radiolabeling of biomolecules in method robustness and versatility, we report the synthesis and radiolabeling of a new azido precursor potentially useful for the so-called "click reaction," in particular the ligand-free version of the copper(I)-catalyzed alkyne-azide cycloaddition. The new azido precursor may help to overcome problems sometimes exhibited by most of the currently used analogues, as it is safe to handle and it displays long-term chemical stability, thus facilitating the development of new radiolabeling procedures. Moreover, the formed ¹⁸ F-labeled 1,2,3-triazole is potentially metabolically stable and could enhance the in vivo circulation time. The above azido precursor was successfully radiolabeled with ¹⁸ F, with 51% radiochemical yield (nondecay-corrected). As a proof of concept, the ¹⁸ F-labeled azide was then tested with a suitable alkyne functionalized aminoacid (l-propargylglycine), showing 94% of conversion, and a final radiochemical yield of 27% (>99% radiochemical purity), nondecay-corrected, with a total preparation time of 104 minutes.

Fluorine-18 labelled building blocks for PET tracer synthesis

This review presents a comprehensive overview of the synthesis and application of fluorine-18 labelled building blocks since 2010.

Synthesis and pre-clinical evaluation of a new class of high-affinity 18F-labeled PSMA ligands for detection of prostate cancer by PET imaging

Purpose

Current clinical imaging of PSMA-positive prostate cancer by positron emission tomography (PET) mainly features ⁶⁸Ga-labeled tracers, notably [⁶⁸Ga]Ga-PSMA-HBED-CC. The longer half-life of fluorine-18 offers significant advantages over Ga-68, clinically and logistically. We aimed to develop high-affinity PSMA inhibitors labeled with fluorine-18 as alternative tracers for prostate cancer.

Methods

Six triazolylphenyl ureas and their alkyne precursors were synthesized from the Glu-urea-Lys PSMA binding moiety. PSMA affinity was determined in a competitive binding assay using LNCaP cells. The [¹⁸F]triazoles were isolated following a Cu(I)-catalyzed click reaction between the alkynes and [¹⁸F]fluoroethylazide. The ¹⁸F-labeled compounds were evaluated in nude mice bearing LNCaP tumors and compared to [⁶⁸Ga]Ga-PSMA-HBED-CC and [¹⁸F]DCFPyL. Biodistribution studies of the two tracers with the highest imaged-derived tumor uptake and highest PSMA affinity were undertaken at 1 h, 2 h and 4 h post-injection (p.i.), and co-administration of PMPA was used to determine whether uptake was PSMA-specific.

Results

F-18-labeled triazolylphenyl ureas were prepared with a decay-corrected RCY of 20–40 %, >98 % radiochemical and chemical purity, and specific activity of up to 391 GBq/μmol. PSMA binding (IC₅₀) ranged from 3–36 nM. The position of the triazole influenced tumor uptake (3 > 4 > 2), and direct conjugation of the triazole with the phenylurea moiety was preferred to insertion of a spacer group. Image-derived tumor uptake ranged from 6–14 %ID/g at 2 h p.i., the time of maximum tumor uptake; uptake of [⁶⁸Ga]Ga-PSMA-HBED-CC and [¹⁸F]DCFPyL was 5–6 %ID/g at 1–3 h p.i., the time of maximum tumor uptake. Biodistribution studies of the two most promising compounds gave maximum tumor uptakes of 10.9 ± 1.0 % and 14.3 ± 2.5 %ID/g, respectively, as compared to 6.27 ± 1.44 %ID/g for [⁶⁸Ga]Ga-PSMA-HBED-CC.

Conclusions

Six [¹⁸F]triazolylphenyl ureas were prepared in good radiochemical yield. Compounds showed PSMA-specific uptake in LNCaP tumors as high as 14 % ID/g, more than a 2-fold increase over [⁶⁸Ga]Ga-PSMA-HBED-CC. The facile and high-yielding radiosynthesis of these ¹⁸F-labeled triazoles as well as their promising in vitro and in vivo characteristics make them worthy of clinical development for PET imaging of prostate cancer.

Electronic supplementary material

The online version of this article (doi:10.1007/s00259-016-3556-5) contains supplementary material, which is available to authorized users.

PET imaging of in vivo caspase-3/7 activity following myocardial ischemia-reperfusion injury with the radiolabeled isatin sulfonamide analogue [(18)F]WC-4-116

The utility of [(18)F]WC-4-116, a PET tracer for imaging caspase-3 activation, was evaluated in an animal model of myocardial apoptosis. [(18)F]WC-4-116 was injected into rats at 3 hours after a 30 min period of ischemia induced by temporary occlusion of the left anterior descending coronary artery in Sprague-Dawley rats. [(18)F]WC-4-116 uptake was quantified by 1) autoradiography, 2) microPET imaging studies, and 3) post-PET biodistribution studies. MicroPET imaging also assessed uptake of the non-caspase-3-targeted tracer [(18)F]ICMT-18 at 3 hours postischemia. Enzyme assays and Western blotting assessed caspase-3 activation in both at-risk and not-at-risk regions. Caspase-3 enzyme activity increased in the at-risk but not in the not-at-risk myocardium. Quantitative autoradiographic analysis of [(18)F]WC-4-116 demonstrated nearly 2-fold higher uptake in the ischemia-reperfusion (IR) versus sham animals. [(18)F]WC-4-116 microPET imaging studies demonstrated that the IR animals was similarly elevated in relation to sham. [(18)F]ICMT-18 uptake did not increase in at-risk myocardium despite evidence of caspase-3 activation. Biodistribution studies with [(18)F]WC-4-116 confirmed the microPET findings. These data indicate that the caspase-3-PET tracer [(18)F]WC-4-116 can noninvasively image in vivo caspase activity during myocardial apoptosis and may be useful for clinical imaging in humans.

Development of a PET radiotracer for non-invasive imaging of the reactive oxygen species, superoxide, in vivo

Reactive oxygen species (ROS) have been implicated in the pathogenesis of a wide range of human disease states and drug toxicities, but development of imaging tools to study ROS biology in vivo remains a challenge. Here we synthesized and validated a novel PET tracer (12) and its (18)F radiolabeled version [(18)F]12 to allow PET ( positron emission tomography) imaging of superoxide in vivo. Initial analysis of ROS reaction kinetics found that compound 12 was rapidly and selectively oxidized by superoxide, but not other ROS. Cell culture studies in EMT6 cells exposed to the cancer chemotherapeutic agent Doxorubicin (DOX), which activates the superoxide-generating enzyme, NADPH oxidase, showed that compound 12 was a sensitive and specific probe for superoxide in cells. The microPET imaging of heart in mice with DOX-induced cardiac inflammation observed 2-fold greater oxidation of [(18)F]12 in the DOX-treated mice compared to controls (p = 0.02), the results were confirmed by distribution studies on organs subsequently removed from the mice and HPLC analysis of [(18)F] radioactivity compounds. These data indicate that compound 12 is a useful PET tracer to imaging ROS in vivo.

Facile purification and click labeling with 2-[18F]fluoroethyl azide using solid phase extraction cartridges

A facile method was developed to purify 2-[¹⁸F]fluoroethyl azide ([¹⁸F]FEA) using a C18 cartridge and an Oasis^® HLB cartridge in series, in which [¹⁸F]FEA was exclusively trapped on the HLB cartridge. [¹⁸F]FEA can be eluted for reactions in solution; alternatively click labeling can be carried out on the HLB cartridge itself by loading an alkyne substrate and copper (I) catalyst dissolved in DMF onto the cartridge. This solid phase extraction methodology for purification and click labeling with [¹⁸F]FEA, either in solution or on the cartridge, is safe, simple, reproducible in high yield, and compatible with automated synthesis of ¹⁸F-labeled PET tracers.

Improved synthesis of [(18)F]FLETT via a fully automated vacuum distillation method for [(18)F]2-fluoroethyl azide purification

The synthesis of [(18)F]2-fluoroethyl azide and its subsequent click reaction with 5-ethynyl-2'-deoxyuridine (EDU) to form [(18)F]FLETT was performed using an iPhase FlexLab module. The implementation of a vacuum distillation method afforded [(18)F]2-fluoroethyl azide in 87±5.3% radiochemical yield. The use of Cu(CH3CN)4PF6 and TBTA as catalyst enabled us to fully automate the [(18)F]FLETT synthesis without the need for the operator to enter the radiation field. [(18)F]FLETT was produced in higher overall yield (41.3±6.5%) and shorter synthesis time (67min) than with our previously reported manual method (32.5±2.5% in 130min).

18F-labeling using click cycloadditions

Due to expanding applications of positron emission tomography (PET) there is a demand for developing new techniques to introduce fluorine-18 (t_1/2 = 109.8 min). Considering that most novel PET tracers are sensitive biomolecules and that direct introduction of fluorine-18 often needs harsh conditions, the insertion of ¹⁸F in those molecules poses an exceeding challenge. Two major challenges during ¹⁸F-labeling are a regioselective introduction and a fast and high yielding way under mild conditions. Furthermore, attention has to be paid to functionalities, which are usually present in complex structures of the target molecule. The Cu-catalyzed azide-alkyne cycloaddition (CuAAC) and several copper-free click reactions represent such methods for radiolabeling of sensitive molecules under the above-mentioned criteria. This minireview will provide a quick overview about the development of novel ¹⁸F-labeled prosthetic groups for click cycloadditions and will summarize recent trends in copper-catalyzed and copper-free click ¹⁸F-cycloadditions.

Synthesis, [¹⁸F] radiolabeling, and evaluation of poly (ADP-ribose) polymerase-1 (PARP-1) inhibitors for in vivo imaging of PARP-1 using positron emission tomography

Imaging of poly (ADP-ribose) polymerase-1 (PARP-1) expression in vivo is a potentially powerful tool for developing PARP-1 inhibitors for drug discovery and patient care. We have synthesized several derivatives of benzimidazole carboxamide as PARP-1 inhibitors, which can be (18)F-labeled easily for positron emission tomographic (PET) imaging. Of the compounds synthesized, 12 had the highest inhibition potency for PARP-1 (IC50=6.3 nM). [(18)F]12 was synthesized under conventional conditions in high specific activity with 40-50% decay-corrected yield. MicroPET studies using [(18)F]12 in MDA-MB-436 tumor-bearing mice demonstrated accumulation of [(18)F]12 in the tumor that was blocked by olaparib, suggesting that the uptake of [(18)F]12 in the tumor is specific to PARP-1 expression.

Utilizing electrostatic interactions to facilitate F-18 radiolabeling of poly(amido)amine (PAMAM) dendrimers

Electrostatic interactions facilitate conjugation reactions of cationic poly(amido)amine (PAMAM) dendrimers with anionic NHS reagents.

Recent trends in bioorthogonal click-radiolabeling reactions using fluorine-18

The increasing application of positron emission tomography (PET) in nuclear medicine has stimulated the extensive development of a multitude of novel and versatile bioorthogonal conjugation techniques especially for the radiolabeling of biologically active high molecular weight compounds like peptides, proteins or antibodies. Taking into consideration that the introduction of fluorine-18 (t(1/2) = 109.8 min) proceeds under harsh conditions, radiolabeling of these biologically active molecules represents an outstanding challenge and is of enormous interest. Special attention has to be paid to the method of 18F-introduction. It should proceed in a regioselective manner under mild physiological conditions, in an acceptable time span, with high yields and high specific activities. For these reasons and due to the high number of functional groups found in these compounds, a specific labeling procedure has to be developed for every bioactive macromolecule. Bioorthogonal strategies including the Cu-assisted Huisgen cycloaddition and its copper-free click variant, both Staudinger Ligations or the tetrazine-click reaction have been successfully applied and represent valuable alternatives for the selective introduction of fluorine-18 to overcome the afore mentioned obstacles. This comprehensive review deals with the progress and illustrates the latest developments in the field of bioorthogonal labeling with the focus on the preparation of radiofluorinated building blocks and tracers for molecular imaging.

Chelator-accelerated one-pot 'click' labeling of small molecule tracers with 2-[¹⁸F]fluoroethyl azide

2-[¹⁸F]Fluoroethyl azide ([¹⁸F]FEA) can readily be obtained by nucleophilic substitution of 2-azidoethyl-4-toluenesulfonate with [¹⁸F]fluoride (half-life 110 min), and has become widely used as a reagent for ‘click’ labeling of PET tracers. However, distillation of [¹⁸F]FEA is typically required, which is time-consuming and unpractical for routine applications. In addition, copper(I)-catalyzed cycloaddition of [¹⁸F]FEA with non-activated alkynes, and with substrates containing labile functional groups, can be challenging. Herein, we report a highly efficient and practical ligand-accelerated one-pot/two-step method for ‘click’ labeling of small molecule tracers with [¹⁸F]FEA. The method exploits the ability of the copper(I) ligand bathophenanthrolinedisulfonate to accelerate the rate of the cycloaddition reaction. As a result, alkynes can be added directly to the crude reaction mixture containing [¹⁸F]FEA, and as cyclisation occurs almost immediately at room temperature, the reaction is tolerant to labile functional groups. The method was demonstrated by reacting [¹⁸F]FEA with a series of alkyne-functionalized 6-halopurines to give the corresponding triazoles in 55–76% analytical radiochemical yield.