A systematic study of the release of bisphenol A by orthodontic materials and its biological effects

In vitro analysis of the influence of the thermocycling and the applied force on orthodontic clear aligners

The mechanical properties of polyurethane dental aligners have been studied in an oral environment at 37°C and subjected to thermal cycling between 5°C and 55°C for long periods of time at different mechanical stresses. The aim is to determine the efficacy of the orthodontic aligner at different stress levels, the effect of thermal cycling with therapy time on tooth position correction. Sixty aligners with the same design were studied applying tensions of 0, 3 and 30 N and determining the deformation at different times from 1 to 760 h. Half of these aligners were subjected to stresses submerged in artificial saliva at 37°C and the other half were subjected to thermal cycles between 2°C and 55°C in salivary medium. Deformation was determined using a high-resolution stereo magnifier and ImageJ image analysis software. Water adsorption by the polyurethane was determined at the different test times. The results showed that in the unloaded aligners there is no appreciable deformation, but with thermal cycling there is a light shrinkage of the aligner due to the semi-crystallization process (ordering of polymeric chains) of the polyurethane. When applying loads of 3 and 30 N, creep curves with constant deformation transition zones can be seen. The transition zones decrease as the applied mechanical load increases. In addition, the significant effect of thermal cycling on the reduction of the transition zone of the aligners has been demonstrated. The transition zones are optimal for dental correction as constant stresses are exerted for tooth movement. The effect of thermal cycling shortens the constant deformation zone and reduces tooth alignment time. It was observed that the absorption of water in the aligner is constant after 1 h of immersion and does not exceed 0.4% by weight of absorbed water.

Immune System Acts on Orthodontic Tooth Movement: Cellular and Molecular Mechanisms

Orthodontic tooth movement (OTM) is a tissue remodeling process based on orthodontic force loading. Compressed periodontal tissues have a complicated aseptic inflammatory cascade, which are considered the initial factor of alveolar bone remodeling. Since skeletal and immune systems shared a wide variety of molecules, osteoimmunology has been generally accepted as an interdisciplinary field to investigate their interactions. Unsurprisingly, OTM is considered a good mirror of osteoimmunology since it involves immune reaction and bone remolding. In fact, besides bone remodeling, OTM involves cementum resorption, soft tissue remodeling, orthodontic pain, and relapse, all correlated with immune cells and/or immunologically active substance. The aim of this paper is to review the interaction of immune system with orthodontic tooth movement, which helps gain insights into mechanisms of OTM and search novel method to short treatment period and control complications.

Influence of intraoral application of antiseptics and fluorides during orthodontic treatment on corrosion and mechanical characteristics of nickel-titanium alloy in orthodontic appliances

OBJECTIVES

To explore whether the commercial agents recommended for controlling dental biofilm formation had a significant effect in vivo on mechanical and corrosion properties of nickel-titanium (NiTi) alloy.

MATERIALS AND METHODS

NiTi archwires (dimensions 0.508 × 0.508 mm) were collected from 36 orthodontic patients aged 13-42 years after a 3-month intraoral exposure. Three experimental groups were formed: (1) subjects conducting regular oral hygiene, (2) subjects who used fluorides for intensive prophylaxis for the first month, and (3) subjects who used chlorhexidine in the same manner. Corrosion behavior, surface characteristics, stiffness, hardness, and friction were analyzed.

RESULTS

Exposure to intraoral conditions significantly reduced the stiffness and hardness of the NiTi alloy (P ≤ .015). Fluoride tended to reduce stiffness and hardness more than did saliva or antiseptic, but not significantly. Roughness and friction were not significantly influenced by oral exposure. Intraoral aging predominantly produced general corrosion independent of the adjuvant prophylactic agent, although localized corrosion may also have occurred.

CONCLUSIONS

Fluorides and the antiseptic chlorhexidine do not increase corrosion more than saliva itself, nor do they further modify the mechanical properties of the NiTi alloy.

A Review on Current Trends of Polymers in Orthodontics: BPA-Free and Smart Materials

Polymeric materials have always established an edge over other classes of materials due to their potential applications in various fields of biomedical engineering. Orthodontics is an emerging field in which polymers have attracted the enormous attention of researchers. In particular, thermoplastic materials have a great future utility in orthodontics, both as aligners and as retainer appliances. In recent years, the use of polycarbonate brackets and base monomers bisphenol A glycerolate dimethacrylate (bis-GMA) has been associated with the potential release of bisphenol A (BPA) in the oral environment. BPA is a toxic compound that acts as an endocrine disruptor that can affect human health. Therefore, there is a continuous search for non-BPA materials with satisfactory mechanical properties and an esthetic appearance as an alternative to polycarbonate brackets and conventional bis-GMA compounds. This study aims to review the recent developments of BPA-free monomers in the application of resin dental composites and adhesives. The most promising polymeric smart materials are also discussed for their relevance to future orthodontic applications.

Endocrine Disruptors as a New Etiologic Factor of Bone Tissue Diseases (Review)

At present, diseases of bones and joints stand third after cardiovascular and oncological pathologies which demands the necessity of searching for new etiological factors and pathogenetical mechanisms of these illnesses. The accumulating data show the association between the impairment of bone tissue development and regeneration and endocrine disruptor impact. Endocrine disruptors are chemical substances, mainly of anthropogenic origin, capable of affecting endocrine system functioning and interfering with organ morphogenesis and physiological functions. The development and regeneration of bone tissues have a complex hormonal regulation and therefore bone tissue cells, osteoblasts, and osteoclasts can be considered as potential targets for endocrine disruptors. Endocrine disruptors have been established to be able to impair calcium metabolism which also contributes to the development of musculoskeletal system pathology. Data on histogenesis of bone tissue and regeneration, calcium metabolism as well as on hormonal regulation of bone growth and remodeling processes are presented in this work. Recent information on the effect of the main endocrine disruptor classes (diethylstilbestrol, organochlorine pesticides, alkylphenols, bisphenol A, dioxins, polychlorinated biphenyls, and phthalic acid esters) on the development and remodeling of bone tissues and calcium metabolism has been summarized. The established physiological and molecular mechanisms of their action have been also considered.

The Neurochemical Characterization of Parasympathetic Nerve Fibers in the Porcine Uterine Wall Under Physiological Conditions and After Exposure to Bisphenol A (BPA)

Bisphenol A, a substance commonly used in plastic manufacturing, is relatively well known as an endocrine disruptor, which may bind to estrogen receptors and has multidirectional negative effects on both human and animal organisms. Previous studies have reported that BPA may act on the reproductive organs, but knowledge concerning BPA-induced changes within the nerves located in the uterine wall is extremely scant. The aim of this study was to investigate the impact of various doses of BPA on the parasympathetic nerves located in the corpus and horns of the uterus using a single and double immunofluorescence method. The obtained results have shown that BPA may change not only the expression of vesicular acetylcholine transporter (VAChT—a marker of parasympathetic nervous structures) in the uterine intramural nerve fibers, but also the degree of colocalization of this substance with other neuronal factors, including substance P (SP), vasoactive intestinal polypeptide (VIP), galanin (GAL), and calcitonin gene–related peptide (CGRP). Moreover, BPA caused changes in the density of the overall populations of fibers immunoreactive to the particular neuropeptides mentioned above. The characteristics of the changes clearly depended on the part of the uterus, the neuronal factors studied, and the dosage of BPA. The mechanisms of the observed fluctuations are probably connected with the neurotoxic and/or pro-inflammatory activity of BPA. Moreover, the results have shown that even low doses of BPA are not neutral to living organisms. Changes in the neurochemical characterization of nerves supplying the uterine wall may be the first subclinical sign of intoxication with this substance.

A Systematic Review of Exposure to Bisphenol A from Dental Treatment

INTRODUCTION

Dental composite restorations and dental sealants containing bisphenol A glycidyl methacrylate (BisGMA) are commonly used materials in dentistry. Bisphenol A (BPA) is used to manufacture BisGMA and can be a by-product in BisGMA-based dental materials. BPA is an endocrine-disrupting chemical that may affect reproductive, psychological, cognitive, and endocrine-related health. We conducted a systematic review of clinical studies that measured urinary BPA (uBPA) concentrations before and after dental treatment to evaluate the extent to which individuals are exposed to BPA from dental treatment.

METHODS

Eligibility included studies that measured uBPA concentrations before and after dental treatment with any type of resin-based dental material. We searched PubMed, Cochrane, Web of Science, Virtual Health Library, Science Direct, ProQuest, and Clinical Trials with no date or language restrictions to identify published studies. We summarized eligible studies across participant characteristics, amount of treatment, and time of follow-up measures. Because methods of measuring uBPA varied, our primary outcome was the direction and percentage change between baseline and 24 h posttreatment and at later time points as available.

RESULTS

We identified 1,190 abstracts and 7 eligible studies: 4 in children and 3 in adults. In all studies, BPA concentrations increased 24 h after treatment. The 2 studies with the largest sample sizes found statistically significant increases >40% in uBPA concentrations at 24 h posttreatment (both P values <0.01). The 1 study to examine uBPA concentrations beyond 1 mo posttreatment found that concentrations returned to baseline by 14 d after treatment and remained at baseline 6 mo after treatment.

CONCLUSIONS

Our findings suggest that uBPA concentrations increase 24 h after dental treatment. One study showed that uBPA concentrations return to baseline by 14 d. Additional research is needed to determine the magnitude of change from pre- to post-dental treatment and the trajectory of uBPA concentrations posttreatment.

KNOWLEDGE TRANSFER STATEMENT

BPA is an endocrine-disrupting chemical that may have negative human health effects. Our findings suggest that urinary BPA concentrations increase in the short term after dental treatment. The extent to which such an increase may affect the health of patients remains an open question, particularly since there are no established thresholds for safety or harm related to BPA exposure.