Effect of bleaching with carbamide peroxide on shear bond strength of orthodontic brackets: A meta-analysis of in vitro studies

Reduction of surface treatment time by combination of citric acid and ascorbic acid while restoring shear bond strength of metal brackets bonded to bleached enamel: a pilot study

BACKGROUND

To investigate the effect of a 50% ascorbic acid with 50% citric acid solution on the immediate shear bond strength (SBS) of metallic brackets after tooth bleaching. The enamel etching pattern and the required quantity of these combined acids as antioxidants following 35% hydrogen peroxide (HP) bleaching were also determined.

METHODS

The stability of the solution at room temperature was assessed at various time intervals. Fifty teeth were randomly divided into five groups: non-bleached (G1), bleached then acid etched (G2), bleached followed by a 10-minute treatment with 10% sodium ascorbate and acid etched (G3), 5-minute treatment with 50% ascorbic acid (G4), and 5-minute treatment with a combination of 50% ascorbic acid and 50% citric acid (G5). Groups G2, G3, G4 and G5 were bleached by 35% HP gel for a total of 32 min. Acid etching in groups G1, G2, and G3 was performed using 37% phosphoric acid (Ormco®, Orange, CA, USA) for 15 s. In all groups, metal brackets were immediately bonded using Transbond™ XT primer and Transbond™ PLUS adhesive, with light curing for 40 s. The SBS was tested with a universal testing machine, and statistical analysis was conducted using one-way ANOVA followed by Tukey's HSD test. The level of significance was set at p < 0.05 for all statistical tests.

RESULTS

Stability tests demonstrated that the combined acids remained effective for up to 21 days. Group G5 significantly increased the SBS of bleached teeth to the level of G1 (p < 0.05), while G3 did not achieve the same increase in SBS (p > 0.05). SEM analysis revealed enamel etching patterns similar to those of both control groups (G1 and G2). Kinetic studies at 6 min indicated that the antioxidation in G5 reacted 0.2 mmole lower than in G3 and G4.

CONCLUSION

5-minute application of the combined acids enhanced the SBS of bleached teeth comparable to unbleached teeth. The combined acids remain stable over two weeks, presenting a time-efficient, single-step solution for antioxidant application and enamel etching in orthodontic bracket bonding.

Bleaching effect on bonding performance of composite to enamel

This study aimed to assess the effects of dental bleaching on the immediate shear bond strength (SBS) of composite to enamel. Different bleaching methods and time intervals between bleaching and composite restoration were examined. A total of 45 enamel specimens were divided into three groups (n = 15) based on the applied bleaching protocol: in-office (A), at-home (B), and unbleached control (C). Groups A and B were then subdivided into three time intervals until bonding: 1, 3, and 7 days. The composite was bonded to enamel using self-etch adhesive technique and submitted to SBS testing. The enamel surface and adhesive interface were observed under scanning electron microscope (SEM). The highest average SBS was measured in the control (unbleached) group (31.1 ± 3.4). A significant difference in SBS was found between the control and in-office bleaching (p < .001), as well as between control and at-home bleaching (p = .034), while the difference between in-office and at-home bleaching methods was insignificant. In relation to the waiting period, a significant reduction in SBS (p < .001) was found 1 day post-bleaching. The weakest marginal sealing to enamel under SEM was observed also 1 day after bleaching. Both bleaching methods significantly reduced the SBS of composite to enamel, especially immediately after the bleaching procedure. Reduction in SBS is temporary and 3-day waiting period seems to be sufficient to reverse the adverse effects of bleaching. RESEARCH HIGHLIGHTS: SBS of composite to enamel is significantly reduced by bleaching procedures, especially immediately after bleaching. The reduction in SBS is temporary and reversible by delaying the restoration for a minimum of 3 days.

Effect of Different Desensitizer Treatments on the Shear Bond Strength of Orthodontic Metal Brackets Following In-Office Bleaching: An In Vitro Study

OBJECTIVE

 One of the adverse effects of in-office bleaching is tooth hypersensitivity, which could be neutralized with a desensitizing agent. In-office bleaching and the application of desensitizing agents will affect the morphology of the enamel surface. These morphological changes have potential effects on the shear bond strength (SBS) and bonding of orthodontic brackets. This study analyzed the effects of fluoride and nonfluoride desensitizing agents after in-office bleaching on the SBS of metal brackets with resin composite cementation.

MATERIALS AND METHODS

 Twenty-seven postextraction premolars (n = 27) were bleached with 37% hydrogen peroxide and then divided into three groups: control group (group 1), fluoride-based desensitizing agent (group 2), and nonfluoride-based desensitizing agent (group 3). After treatment, the brackets were bonded using Transbond, and then the SBS test was performed using a universal testing machine. The adhesive remnant index (ARI) was analyzed after the SBS test, whereas enamel morphological changes were observed under a scanning electron microscope. After this assessment, energy-dispersive X-ray spectroscopy was conducted to determine calcium and phosphorus elements in the enamel surface after treatments. SBS data were analyzed using the one-way analysis of variance, followed by the Tukey test, whereas ARI scores were subjected to the Kruskal-Wallis test and the Mann-Whitney test with a significance level of 5%.

RESULTS

 The SBS increased significantly in group 2 compared with groups 1 and 3 (p < 0.05). In group 2, an ARI of 2 (55.56%) was frequent, whereas in group 3, an ARI of 3 (55.56%) appeared most frequently.

CONCLUSION

 The application of the desensitizing agent fluoride after in-office bleaching increased the SBS and more adhesive remains on the tooth surface compared with that when nonfluoride desensitizing agents were applied on metal brackets with composite resin cementation.

Effect of re-mineralizing surface treatment on the shear bond strength of orthodontic bracket: A systematic review and meta-analysis of in-vitro studies

INTRODUCTION

Re-mineralizing surface pretreatment is essential for both controlling and preventing white spot lesion (WSL) throughout the time of fixed orthodontic treatment. It is also important that the re-mineralizing have no negative impact on the bonding between the bracket, adhesive, and enamel. Therefore, this review is aimed to investigate the orthodontic brackets' shear bond strength after re-mineralizing surface treatment of enamel.

MATERIAL AND METHODOLOGY

The review was conducted following the PRISMA 2020 guidelines. In-vitro experimental studies measuring shear bond strength (SBS) of orthodontic brackets on both demineralized and intact enamel following re-mineralizing surface treatment were included. Database search was done in PubMed, Scopus, and Science Direct during July 2023. Methodological quality of the studies was assessed according to the guidelines for the reporting of pre-clinical in-vitro studies. Both qualitative and quantitative analyses of the included studies were done.

RESULTS

Matching the inclusion criteria, 46 and 37 studies were selected for qualitative and quantitative analysis respectively. On intact enamel re-mineralizing agents had no negative impact on the brackets' SBS. On the contrary, they seemed to enhance the bond strength remarkably on the demineralized enamel.

DISCUSSION

Re-mineralizing surface pretreatment is crucial prior to fixed orthodontic treatment as it did not reduce the bond strength. Although, it cannot be judged depending solely on the in-vitro results with high heterogeneity. Clinical evidence is required to support the statement.

Effect of bleaching treatments on the adhesion of orthodontic brackets: a systematic review

BACKGROUND

Nowadays bleaching procedures have gained popularity in orthodontic patients. Peroxide and Carbamide acids are the common agents which are used in in-office and at home bleaching techniques. Consequently, the Bonding adhesion to the enamel can be influenced by the orthodontic phase and the residual peroxide might interfere with the polymerization and the adhesion of the brackets. Frequent debonding of the brackets from teeth after the bleaching procedure could cause the lengthening of the therapy and promote irregularities on enamel surface derived from an additional bonding phase of the brackets. The aim of this systematic review is to appraise the influence regarding the effect of the bleaching procedure on the bond strength of orthodontic brackets.

METHODS

An electronic database search was performed. Search terms included: bleaching, brackets, adhesion; data were extracted and summarized. Risk of bias was assessed using the Chocrane risk of bias tool, adapted for in vitro studies.

RESULTS

A total of 8689 articles were screened and 11 studies met the inclusion criteria of this systematic review. 1000 teeth of human and bovine origin were analyzed for the shear bond strength (SBS) of stainless and ceramic brackets after the bleaching treatments. All the authors divided the groups in different subgroups with different bleaching agents and in different concentration. The SBS value allowed to demonstrate the necessity to delay the bonding of the brackets for two weeks after a bleaching treatment and its improvement when tooth mousse or antioxidants agents are used.

CONCLUSIONS

The SBS values and the delay of the bonding procedure must be considered in dental practice and clinical strategies are necessary in order to avoid drawbacks which could cause the debonding of the brackets after bleaching due to the alterations of the dental substrate, thus interfering with the orthodontic treatments.

Antioxidant effect on shear bond strength of orthodontic brackets after tooth bleaching: A scoping review of in vitro studies

INTRODUCTION

Tooth bleaching was reported to decrease bond strength of orthodontic brackets. The antioxidant application was investigated to reverse the bleaching effect for immediate bracket bonding. This scoping review of in vitro studies is to assess systematically the effect of antioxidant application on shear bond strength (SBS) before orthodontic bracket bonding after tooth bleaching.

MATERIALS AND METHODS

This review was provided according to the Preferred reporting items for systematic reviews and meta-analyses extension for scoping reviews (PRISMA-ScR) guidelines. An electronic literature search was performed for full-text articles in English via Scopus, Web of Science, MEDLINE/PubMed, and Google Scholar databases from 2012 to May 9, 2023.

RESULTS

A total of 549 records were retrieved from the electronic search, and 361 after discarding duplicates. According to eligibility criteria, 23 records were included in this study.

CONCLUSION

Included studies revealed that antioxidants could increase the SBS of brackets after bleaching. However, there was controversiality whether SBS was just improved or restored to the unbleached level according to various factors, including the antioxidant type, concentration, application time, and form. Most studies reported that 10% sodium ascorbate (SA), ascorbic acid, green tea (GT), and tocopherol solutions restored SBS of metal brackets but not ceramic brackets. The result of 10% SA and GT gel was controversial. Lower concentrations than 10% was effective with pink bark, grape seed, quercetin flavonoid, and chamomile to restore SBS. The included studies revealed that retinol acetate, gooseberry, and dimethyl sulfoxide did not restore SBS.