Prevention and treatment of experimental osteomyelitis in dogs with ciprofloxacin-loaded crosslinked high amylose starch implants

The Application of Rat Models in Staphylococcus aureus Infections

Staphylococcus aureus (S. aureus) is a major human pathogen and can cause a wide range of diseases, including pneumonia, osteomyelitis, skin and soft tissue infections (SSTIs), endocarditis, mastitis, bacteremia, and so forth. Rats have been widely used in the field of infectious diseases due to their unique advantages, and the models of S. aureus infections have played a pivotal role in elucidating their pathogenic mechanisms and the effectiveness of therapeutic agents. This review outlined the current application of rat models in S. aureus infections and future prospects for rat models in infectious diseases caused by S. aureus.

Recurrent skin opening induced by chronic sternal osteomyelitis caused by a bite wound in a cat: A case report

BACKGROUND

Chronic sternal osteomyelitis is a rare condition in felines, with limited reported cases to date.

OBJECTIVES

We report the case of a 2-year-old castrated male, domestic shorthair cat, weighing 4.68 kg, that presented with skin openings every 3-4 months, despite skin debridement and reconstruction.

METHODS

A subcutaneous dead space larger than the skin defect was detected. Haematological analysis revealed elevated levels of inflammatory markers. Thoracic radiography revealed sternal deformation and suspected osteomyelitis. Computed tomography revealed a fistula extending from the third to the fourth sternebrae.

RESULTS

Bone and soft tissue debridement and abscess flushing were performed along with long-term antibiotic therapy. The cat remained recurrence-free throughout an 18-month post-surgery follow-up period.

CONCLUSION

To the best of our knowledge, this is the first report of chronic osteomyelitis occurring in a cat's sternebrae and represents the first successful case of its treatment. This case showcases the potential for improved treatment outcomes in similar cases. Understanding and successful treatment of such cases can pave the way for better management of feline osteomyelitis.

Microbiological aspects of osteomyelitis in veterinary medicine: drawing parallels to the infection in human medicine

Osteomyelitis is a challenging infectious disease affecting humans and animals. It is difficult to diagnose because, in many cases, symptoms are non-specific and, for example in implant-related cases, can appear long time after surgery. In addition to this, it is also difficult to treat due to the need to find the appropriate antibiotic regime and delivery system to reach the site of infection and to avoid development of bacterial resistance. The central purpose of this review is to compare the microbiological aspects of osteomyelitis in human and veterinary medicine, with the aim of improving the microbiological diagnosis and treatment of this infection in animals. Furthermore, the study of osteomyelitis in animals may help to improve the development of animal models for testing new treatments in humans. Host factors and underlying conditions have been studied mainly in humans, although aspects as immunodeficiency have been described in some veterinary cases. Even when Staphylococcus aureus is still considered the most prevalent causing microorganism, this prevalence should be reviewed using molecular diagnostic techniques, and this could affect treatment options. New approaches to treatment include local delivery of antibiotics using different biomaterials, antimicrobial photodynamic therapy, and new antimicrobial compounds. We would like to remark the need of large, high-quality clinical trials and of the development of guides for the diagnosis and treatment of osteomyelitis in different animal species.

Individualized, Additively Manufactured Drug-Releasing External Ear Canal Implant for Prevention of Postoperative Restenosis: Development, In Vitro Testing, and Proof of Concept in an Individual Curative Trial

Postoperative restenosis in patients with external ear canal (EEC) atresia or stenosis is a common complication following canaloplasty. Our aim in this study was to explore the feasibility of using a three dimensionally (3D)-printed, patient-individualized, drug ((dexamethasone (DEX)), and ciprofloxacin (cipro))-releasing external ear canal implant (EECI) as a postoperative stent after canaloplasty. We designed and pre-clinically tested this novel implant for drug release (by high-performance liquid chromatography), biocompatibility (by the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay), bio-efficacy (by the TNF-α (tumor necrosis factor-alpha)-reduction test (DEX) and inhibition zone test (for cipro)), and microbial contamination (formation of turbidity or sediments in culture medium). The EECI was implanted for the first time to one patient with a history of congenital EEC atresia and state after three canaloplasties due to EEC restenosis. The preclinical tests revealed no cytotoxic effect of the used materials; an antibacterial effect was verified against the bacteria Staphylococcus aureus and Pseudomonas aeruginosa, and the tested UV-irradiated EECI showed no microbiological contamination. Based on the test results, the combination of silicone with 1% DEX and 0.3% cipro was chosen to treat the patient. The EECI was implantable into the EEC; the postoperative follow-up visits revealed no otogenic symptoms or infections and the EECI was explanted three months postoperatively. Even at 12 months postoperatively, the EEC showed good epithelialization and patency. Here, we report the first ever clinical application of an individualized, drug-releasing, mechanically flexible implant and suggest that our novel EECI represents a safe and effective method for postoperatively stenting the reconstructed EEC.

Role of Animal Models to Advance Research of Bacterial Osteomyelitis

Osteomyelitis is an inflammatory bone disease typically caused by infectious microorganisms, often bacteria, which causes progressive bone destruction and loss. The most common bacteria associated with chronic osteomyelitis is Staphylococcus aureus. The incidence of osteomyelitis in the United States is estimated to be upwards of 50,000 cases annually and places a significant burden upon the healthcare system. There are three general categories of osteomyelitis: hematogenous; secondary to spread from a contiguous focus of infection, often from trauma or implanted medical devices and materials; and secondary to vascular disease, often a result of diabetic foot ulcers. Independent of the route of infection, osteomyelitis is often challenging to diagnose and treat, and the effect on the patient's quality of life is significant. Therapy for osteomyelitis varies based on category and clinical variables in each case. Therapeutic strategies are typically reliant upon protracted antimicrobial therapy and surgical interventions. Therapy is most successful when intensive and initiated early, although infection may recur months to years later. Also, treatment is accompanied by risks such as systemic toxicity, selection for antimicrobial drug resistance from prolonged antimicrobial use, and loss of form or function of the affected area due to radical surgical debridement or implant removal. The challenges of diagnosis and successful treatment, as well as the negative impacts on patient's quality of life, exemplify the need for improved strategies to combat bacterial osteomyelitis. There are many in vitro and in vivo investigations aimed toward better understanding of the pathophysiology of bacterial osteomyelitis, as well as improved diagnostic and therapeutic strategies. Here, we review the role of animal models utilized for the study of bacterial osteomyelitis and their critically important role in understanding and improving the management of bacterial osteomyelitis.

Animal experimental investigation on the efficacy of antibiotic therapy with linezolid, vancomycin, cotrimoxazole, and rifampin in treatment of periprosthetic knee joint infections by MRSA

Aims

Periprosthetic joint infections (PJIs) are rare, but represent a great burden for the patient. In addition, the incidence of methicillin-resistant Staphylococcus aureus (MRSA) is increasing. The aim of this rat experiment was therefore to compare the antibiotics commonly used in the treatment of PJIs caused by MRSA.

Methods

For this purpose, sterilized steel implants were implanted into the femur of 77 rats. The metal devices were inoculated with suspensions of two different MRSA strains. The animals were divided into groups and treated with vancomycin, linezolid, cotrimoxazole, or rifampin as monotherapy, or with combination of antibiotics over a period of 14 days. After a two-day antibiotic-free interval, the implant was explanted, and bone, muscle, and periarticular tissue were microbiologically analyzed.

Results

Vancomycin and linezolid were able to significantly (p < 0.05) reduce the MRSA bacterial count at implants. No significant effect was found at the bone. Rifampin was the only monotherapy that significantly reduced the bacterial count on implant and bone. The combination with vancomycin or linezolid showed significant efficacy. Treatment with cotrimoxazole alone did not achieve a significant bacterial count reduction. The combination of linezolid plus rifampin was significantly more effective on implant and bone than the control group in both trials.

Conclusion

Although rifampicin is effective as a monotherapy, it should not be used because of the high rate of resistance development. Our animal experiments showed the great importance of combination antibiotic therapies. In the future, investigations with higher case numbers, varied bacterial concentrations, and changes in individual drug dosages will be necessary to be able to draw an exact comparison, possibly within a clinical trial.

Cite this article: Bone Joint Res 2022;11(3):143–151.

Recent Advances in the Evaluation of Antimicrobial Materials for Resolution of Orthopedic Implant-Associated Infections In Vivo

While orthopedic implant-associated infections are rare, revision surgeries resulting from infections incur considerable healthcare costs and represent a substantial research area clinically, in academia, and in industry. In recent years, there have been numerous advances in the development of antimicrobial strategies for the prevention and treatment of orthopedic implant-associated infections which offer promise to improve the limitations of existing delivery systems through local and controlled release of antimicrobial agents. Prior to translation to in vivo orthopedic implant-associated infection models, the properties (e.g., degradation, antimicrobial activity, biocompatibility) of the antimicrobial materials can be evaluated in subcutaneous implant in vivo models. The antimicrobial materials are then incorporated into in vivo implant models to evaluate the efficacy of using the material to prevent or treat implant-associated infections. Recent technological advances such as 3D-printing, bacterial genomic sequencing, and real-time in vivo imaging of infection and inflammation have contributed to the development of preclinical implant-associated infection models that more effectively recapitulate the clinical presentation of infections and improve the evaluation of antimicrobial materials. This Review highlights the advantages and limitations of antimicrobial materials used in conjunction with orthopedic implants for the prevention and treatment of orthopedic implant-associated infections and discusses how these materials are evaluated in preclinical in vivo models. This analysis serves as a resource for biomaterial researchers in the selection of an appropriate orthopedic implant-associated infection preclinical model to evaluate novel antimicrobial materials.

A Smart Drug Delivery System Based on Biodegradable Chitosan/Poly(allylamine hydrochloride) Blend Films

The amalgamation of natural polysaccharides with synthetic polymers often produces fruitful results in the area of drug delivery due to their biodegradable and biocompatible nature. In this study, a series of blend films composed of chitosan (CS)/poly(allylamine hydrochloride) (PAH) in different compositions were prepared as smart drug delivery matrices. The properties of these polymeric films were then explored. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) analysis confirmed an intermolecular hydrogen bonding between CS and PAH. Atomic force microscopy (AFM) revealed improvements in surface morphology as the percentage of PAH in the blend films increased up to 60% (w/w). Water contact angle (WCA) ranged between 97° to 115°, exhibiting the hydrophobic nature of the films. Two films were selected, CTH-1 (90% CS and 10% PAH) and CTH-2 (80% CS and 20% PAH), to test for in vitro cumulative drug release (%) at 37 ± 0.5 °C as a function of time. It was revealed that for simulated gastric fluid (SGF) with pH 1.2, the cumulative drug release (CDR) for CTH-1 and CTH-2 was around 88% and 85% in 50 min, respectively. Both films converted into gel-like material after 30 min. On the other hand, in pH 7.4 phosphate buffer saline (PBS) solution, the maximum CDR for CTH-1 and CTH-2 was 93% in 90 min and 98% in 120 min, respectively. After 120 min, these films became fragments. Sustained drug release was observed in PBS, as compared to SGF, because of the poor stability of the films in the latter. These results demonstrate the excellent potential of blend films in sustained-release drug delivery systems for hydrophilic or unstable drugs.

Outcome following removal of TPLO implants with surgical site infection

Objective To evaluate the outcome of surgical site infection (SSI) associated with tibial plateau levelling osteotomy (TPLO) implants following treatment by medical management alone or implant removal with or without the administration of antibiotic medication.

Animals Ninety dogs (104 TPLO surgical procedures).

Methods Records of dogs that had undergone TPLO implant removal due to SSI were reviewed. Outcome following treatment with antibiotic medications without implant removal, and treatment with implant removal with and without the administration of antibiotic medications was evaluated.

Results Treatment of SSI with antibiotic medication alone failed in 88.9% (64/72) of the dogs. The clinical signs of SSI resolved in 94.9% (74/78) of the dogs treated with implant removal (with and without the administration of antibiotic medication postimplant removal). The effect of administration of antibiotic medication on outcome of treatment of the SSI by implant removal was not significant. The rate of SSI associated with the Synthes implant was higher than with the Slocum implant, but not the New Generation implant.

Conclusion Implant removal with or without the administration of antibiotic medication post-implant removal for treatment of TPLO SSI provided superior outcome compared to treatment with antibiotic medications without implant removal.

Clinical significance Implant removal should be considered for TPLO SSI that have not responded to appropriate medical management. Further investigation of the various TPLO implants and their effects on postoperative infection rate is warranted.

Ciprofloxacin Controlled-Solid Lipid Nanoparticles: Characterization, In Vitro Release, and Antibacterial Activity Assessment

The objective of this research was to formulate ciprofloxacin (CIP) in solid lipid nanoparticles (SLNs) in an attempt to develop a controlled drug delivery system. An ultrasonic melt-emulsification method was used for preparing CIP-loaded SLNs. Key findings included that SLNs were successfully produced with average particle sizes ranging from 165 to 320 nm and polydispersity index in the range of 0.18–0.33. High entrapment efficiency values were reported in all formulations. The atomic force scanning microscopic images showed spherical shape with the size range closer to those found by the particle size analyzer. CIP release exhibited controlled-release behavior with various lipids. Ciprofloxacin solid lipid nanoparticles formula containing stearic acid (CIPSTE) displayed the strongest burst effect and the most rapid release rate. The release data revealed a better fit to the Higuchi diffusion model. After storing the CIPSTE formula at room temperature for 120 days, no significant difference in particle size and zeta potential was found. CIP-loaded SLNs exhibited superior antibacterial activity. Incorporation of CIP into SLNs leads to controlled release and a superior antibacterial effect of CIP.

Nanostructured platforms for the sustained and local delivery of antibiotics in the treatment of osteomyelitis

This article provides a critical view of the current state of the development of nanoparticulate and other solid-state carriers for the local delivery of antibiotics in the treatment of osteomyelitis. Mentioned are the downsides of traditional means for treating bone infection, which involve systemic administration of antibiotics and surgical debridement, along with the rather imperfect local delivery options currently available in the clinic. Envisaged are more sophisticated carriers for the local and sustained delivery of antimicrobials, including bioresorbable polymeric, collagenous, liquid crystalline, and bioglass- and nanotube-based carriers, as well as those composed of calcium phosphate, the mineral component of bone and teeth. A special emphasis is placed on composite multifunctional antibiotic carriers of a nanoparticulate nature and on their ability to induce osteogenesis of hard tissues demineralized due to disease. An ideal carrier of this type would prevent the long-term, repetitive, and systemic administration of antibiotics and either minimize or completely eliminate the need for surgical debridement of necrotic tissue. Potential problems faced by even hypothetically "perfect" antibiotic delivery vehicles are mentioned too, including (i) intracellular bacterial colonies involved in recurrent, chronic osteomyelitis; (ii) the need for mechanical and release properties to be adjusted to the area of surgical placement; (iii) different environments in which in vitro and in vivo testings are carried out; (iv) unpredictable synergies between drug delivery system components; and (v) experimental sensitivity issues entailing the increasing subtlety of the design of nanoplatforms for the controlled delivery of therapeutics.

Ciprofloxacin release using natural rubber latex membranes as carrier

Natural rubber latex (NRL) from Hevea brasiliensis is easily manipulated, low cost, is of can stimulate natural angiogenesis and cellular adhesion, is a biocompatible, material and presents high mechanical resistance. Ciprofloxacin (CIP) is a synthetic antibiotic (fluoroquinolone) used in the treatment of infection at external fixation screws sites and remote infections, and this use is increasingly frequent in medical practice. The aim of this study was to develop a novel sustained delivery system for CIP based on NRL membranes and to study its delivery system behavior. CIP was found to be adsorbed on the NRL membrane, according to results of energy dispersive X-ray spectroscopy. Results show that the membrane can release CIP for up to 59.08% in 312 hours and the mechanism is due to super case II (non-Fickian). The kinetics of the drug release could be fitted with double exponential function X-ray diffraction and Fourier transform infrared (FTIR) spectroscopy shows some interaction by hydrogen bound, which influences its mechanical behavior.

A systematic review of animal models for Staphylococcus aureus osteomyelitis

Staphylococcus aureus (S. aureus) osteomyelitis is a significant complication for orthopaedic patients undergoing surgery, particularly with fracture fixation and arthroplasty. Given the difficulty in studying S. aureus infections in human subjects, animal models serve an integral role in exploring the pathogenesis of osteomyelitis, and aid in determining the efficacy of prophylactic and therapeutic treatments. Animal models should mimic the clinical scenarios seen in patients as closely as possible to permit the experimental results to be translated to the corresponding clinical care. To help understand existing animal models of S. aureus, we conducted a systematic search of PubMed and Ovid MEDLINE to identify in vivo animal experiments that have investigated the management of S. aureus osteomyelitis in the context of fractures and metallic implants. In this review, experimental studies are categorised by animal species and are further classified by the setting of the infection. Study methods are summarised and the relevant advantages and disadvantages of each species and model are discussed. While no ideal animal model exists, the understanding of a model's strengths and limitations should assist clinicians and researchers to appropriately select an animal model to translate the conclusions to the clinical setting.

Biodegradable antibiotic delivery systems

Bacterial infection in orthopaedic surgery can be devastating, and is associated with significant morbidity and poor functional outcomes, which may be improved if high concentrations of antibiotics can be delivered locally over a prolonged period of time. The two most widely used methods of doing this involve antibiotic-loaded polymethylmethacrylate or collagen fleece. The former is not biodegradable and is a surface upon which secondary bacterial infection may occur. Consequently, it has to be removed once treatment has finished. The latter has been used successfully as an adjunct to systemic antibiotics, but cannot effect a sustained release that would allow it to be used on its own, thereby avoiding systemic toxicity.

This review explores the newer biodegradable carrier systems which are currently in the experimental phase of development and which may prove to be more effective in the treatment of osteomyelitis.

A novel canine model of acute pyogenic spondylodiscitis

New, appropriate in vivo animal models are needed for the study of the pathogenesis of spinal infections and the development of novel anti-infection strategies. The purpose of this study was to develop a canine model of acute pyogenic spondylodiscitis which can best mimic the human spinal infection process, characterized by separately inoculating bacterial suspension into the lumbar intervertebral spaces of a single animal. A total of 14 dogs were used in this study. An inoculation containing Staphylococcus aureus and sodium morrhuate was injected into the intervertebral spaces. Two pilot studies were carried out to determine the most appropriate concentration of the bacterium inoculum. Before the inoculation, the intervertebral disks were partially removed and the end plates of the adjacent two vertebrae were deliberately curetted out to make space for the inoculum and to more thoroughly expose the neighboring vertebrae to the bacterial inoculum. The dogs were euthanized at 14 days postimplantation. The bacterial loads of the infected tissues were assayed. Spondylodiscitis of the lumbar spinal column was consistently produced in 90% (nine out of ten) of the sites challenged with 10(2) colony-forming units (CFU) of S. aureus. Liver biopsy and blood culture did not show signs of systematic infections at 14 days postsurgery. Two out of four animals implanted with the suspension at a concentration higher than 10(3) CFUs were dead within 3 days postimplantation. The results indicate that this new canine model of acute pyogenic spondylodiscitis could be used to test the efficacy of different anti-infection strategies.

Sodium fusidate-poly(D,L-lactide-co-glycolide) microspheres: Preparation, characterisation andin vivoevaluation of their effectiveness in the treatment of chronic osteomyelitis

PURPOSE

The aim of this study was to prepare poly(D,L-lactide-co-glycolide) (PLGA) microspheres containing sodium fusidate (SF) using a double emulsion solvent evaporation method with varying polymer:drug ratios (1:1, 2.5:1, 5:1) and to evaluate its efficiency for the local treatment of chronic osteomyelitis.

METHODS

The particle size and distribution, morphological characteristics, thermal behaviour, drug content, encapsulation efficiency and in vitro release assessments of the formulations had been carried out. Sterilized SF-PLGA microspheres were implanted in the proximal tibia of rats with methicillin-resistant Staphylococcus aureus (MRSA) osteomyelitis. After 3 weeks of treatment, bone samples were analysed with a microbiological assay.

RESULTS

PLGA microspheres between the size ranges of 2.16-4.12 microm were obtained. Production yield of all formulations was found to be higher than 79% and encapsulation efficiencies of 19.8-34.3% were obtained. DSC thermogram showed that the SF was in an amorphous state in the microspheres and the glass transition temperature (T(g)) of PLGA was not influenced by the preparation procedure. In vitro drug release studies had indicated that these microspheres had significant burst release and their drug release rates were decreased upon increasing the polymer:drug ratio (p < 0.05). Based on the in vivo data, rats implanted with SF-PLGA microspheres and empty microspheres showed 1987 +/- 1196 and 55526 +/- 49086 colony forming unit of MRSA in 1 g bone samples (CFU/g), respectively (p < 0.01).

CONCLUSION

The in vitro and in vivo studies had shown that the implanted SF loaded microspheres were found to be effective for the treatment of chronic osteomyelitis in an animal experimental model. Hence, these microspheres may be potentially useful in the clinical setting.

Efficacy of ciprofloxacin implants in treating experimental osteomyelitis

Ciprofloxacin (CFX) implants containing poly(D,L-lactide) and calcium phosphates (tricalcium phosphate and hydroxyapatite) was evaluated in 50 rabbits in an experimental osteomyelitis model. Their femoral cavity was inoculated with Staphylococcus aureus. After 2 weeks, the infected focus was cleaned out and the delivery system implanted. The infection and subsequent response to treatment were evaluated by microbiological analysis, biochemical and hematological markers, body weight, temperature, clinical signs, X-rays, and histology. Infected bone cultures, treated with CFX implants, showed reduced bacterial growth against controls. All CFX was released within 6 weeks. All animals recovered within 4 weeks. Even 12 weeks after implantation, no recurrence of infection was observed. Serum C-reactive protein, platelet, and leukocyte levels increased in all animals before treatment, and 4 weeks after it were maintained or rose in control animals, while decreased to normal levels in treated ones. Body weight was characterized by pretreatment losses, then gains during recuperation, or further loss in untreated animals; with no significant intraindividual differences in body temperature. Body weight, leucocytes, platelets, and C-reactive protein turned out to be highly useful markers for monitoring this kind of infection and its treatment. CFX implants demonstrated to be an effective therapy for S. aureus bone infection. Their efficacy was also reflected in decreasing severity of clinical signs, nonprogress of radiological signs indicative of infection, and good integration into bone structure. Histological examination revealed repair, with new bone formation extending into implants.

The effects of clindamycin on human osteoblasts in vitro

INTRODUCTION

Clindamycin is an antibiotic frequently used in different local application forms for the treatment of prosthetic joint infections, chronic osteomyelitis or as infection prophylaxis in bone cement. No information is available regarding its direct effects on bone cells, although very high local effective antibiotic concentrations can be achieved.

MATERIALS AND METHODS

We cultured pooled osteoblasts, previously derived from human trabecular bone specimens of four healthy donors, with different concentrations of clindamycin (0-500 microg/ml) for 24, 48 and 72 h. Cell proliferation (MTT), cytotoxicity [lactate dehydrogenase (LDH)-activity], cell metabolism [alkaline phosphatase (ALP)-activity] and extracellular matrix calcification (Alizarin staining) were assessed after antibiotic treatment.

RESULTS

Proliferation significantly decreased in a dose-dependent manner and reached 3.5% of control samples at 500 microg/ml at 72 h. LDH-activity was unaffected at lower concentrations but significantly increased at 500 microg/ml at 48 and 72 h. ALP-activity significantly increased at 10 microg/ml at 24 and 48 h and then decreased in a time- and dose-dependent manner. Calcification increased at 10 and 25 microg/ml, while it decreased or no calcification was found at concentrations of 50 microg/ml and above.

CONCLUSION

We could demonstrate that clindamycin at lower concentrations stimulated the cell metabolism of human osteoblasts and that higher clindamycin levels of 500 microg/ml had cytotoxic effects. The observed effects of high clindamycin levels on human osteoblasts highlight a potential alteration of bone metabolism in vivo and have to be taken into account in local antibiotic administration, e.g., in clindamycin-impregnated bone cement, where such high antibiotic concentrations can be achieved.

A different perspective for radiological evaluation of experimental osteomyelitis

INTRODUCTION

Radiological scoring systems used in experimental osteomyelitis combine several factors into a single score. Because response of bone tissue to infection is a dynamic process, such systems have limited ability to differentiate between treatment groups. The analyzing of radiological criteria separately at different stages of the disease may be superior to a general score.

METHODS AND METHODS

Osteomyelitis was induced with Staphylococcus aureus in the left tibiae of 72 adult Wistar albino rats. The rats were assigned to one of six different treatment groups. Their radiographs were graded (1) by the use of previously published general scoring systems and (2) by the evaluation of periosteal reaction, bone deformation, diaphyseal widening, osteolysis, soft tissue swelling, bone mineral content (BMC) and bone mineral density (BMD), separately. The assessments were performed 3 weeks after induction as well as 3 weeks and 6 weeks after treatment.

RESULTS

Periosteal reaction and diaphyseal widening demonstrated significant differences within 3 weeks of treatment, contrary to the general scores. After 6 weeks of treatment, individual criteria, including diaphyseal widening, osteolysis and BMC but only one of the general grading scores, were able to differentiate between treatment groups.

CONCLUSIONS

For differentiation of treatments in experimental osteomyelitis individual assessment of radiological criteria is superior to previously published general scoring systems.

Formulation and in vitro characterization of ciprofloxacin floating and bioadhesive extended-release tablets

Ciprofloxacin is mainly absorbed in the proximal areas of the gastrointestinal tract. The purpose of our study was production of floating-bioadhesive tablets to lengthen the stay of drug in its absorption area. Effervescent tablets were made using sodium carboxymethyl cellulose (CMC), hydroxypropyl methylcellulose (HPMC), polyacrylic acid (AA), polymetacrylic acid (MAA), citric acid, and sodium bicarbonate. Tablets with 5% effervescent base had longer lag time than 10%. The type of polymer had no significant effect on the floating lag time. All tablets floated atop the medium for 23-24 hr. Increasing CMC caused higher mucoadhesion than AA (p < 0.05). All formulations showed a Higuchi, non-Fickian release mechanism. Tablets with 10% effervescent base, 80% CMC/20% HPMC, or 80% AA /20% MAA seemed desirable.

The preparation of ciprofloxacin hydrochloride-loaded chitosan and pectin microspheres: their evaluation in an animal osteomyelitis model

Ciprofloxacin hydrochloride-loaded microspheres were prepared by a spray-drying method using pectin and chitosan. The effects of different polymers and drug ratios were investigated. The most appropriate carriers were selected by in vitro testing. A rat methicillin-resistant Staphylococcus aureus osteomyelitis model was used to evaluate the effects of the loaded microspheres. The drug was released rapidly from the pectin carrier but this was more sustained in the chitosan formulation.Chitosan microspheres loaded with ciprofloxacin hydrochloride were more effective for the treatment of osteomyelitis than equivalent intramuscular antibiotics.