Enhancing osteoblast functions on biofilm-contaminated titanium alloy by concentration-dependent use of methylene blue-mediated antimicrobial photodynamic therapy

Comparative Assessment of the Antimicrobial Efficacy of Photoactivated Disinfection Employing Distinct Photosensitizers: A Morphological Analysis Using Scanning Electron Microscopy and Confocal Laser Scanning Microscopy

Background The complex morphology of the root canal system and bacterial infiltration to greater depths precludes complete debridement by mechanical preparation alone. Despite promising characteristics of photodynamic inactivation (PDI) and different photosensitizers (PSs), there has been limited research on the antibacterial efficacy of chitosan (CS)-based PS combinations for root canal disinfection. We aimed to evaluate and compare the antimicrobial efficacy of photoactivated disinfection (PAD) using two different PSs as an adjunct to final irrigation in root canal treatment. Methodology Forty single-rooted human teeth were divided into four groups: Group A (positive control) = chemo-mechanical debridement (5.25% sodium hypochlorite (NaOCl)); Group B = chemo-mechanical debridement (5.25% NaOCl) + 15 μg/ml of methylene blue (MB) with T1 = 30 sec + diode laser (650 nm) and T2 = 30 sec; Group C = chemo-mechanical debridement (5.25% NaOCl) + 15 μg/ml of chlorin e6 (Ce6) with T1 = 30 sec + diode laser (650 nm) and T2 = 30 sec; Group D = chemo-mechanical debridement (5.25% NaOCl) + 15 μg/ml of Ce6 and CS with T1 = 30 sec + diode laser (650 nm) and T2 = 30 sec. Bacterial culture, scanning electron microscopy (SEM), and confocal laser scanning microscopy (CLSM) analysis were used to examine microbial coverage. The data were analyzed using IBM SPSS Statistics software, version 25 (IBM Corp., Armonk, NY); ANOVA followed by Tukey's post-hoc analysis was used to compare colony counts among the four groups. Results While inter-group comparison of pre-irrigation bacterial counts did not reveal a significant difference, post-irrigation counts were greater for NaOCl, followed by MB, Ce6, and Ce6+CS. However, all groups showed a significant reduction in counts post irrigation (Group A = 20.28 vs. 1.36; Group B = 20.12 vs. 1.11; Group C = 20.16 vs. .62; Group D = 20.20 vs. .33; all values in *10). Conclusion Based on colony counts and SEM and CLSM analysis, we found better anti-microbial properties for Ce6+CS, followed by Ce6, MB, and NaOCl, despite not having a difference in their colony counts before irrigation.

Effectiveness of mechanical and chemical decontamination methods for the treatment of dental implant surfaces affected by peri-implantitis: A systematic review and meta-analysis

OBJECTIVE

To assess which decontamination method(s) used for the debridement of titanium surfaces (disks and dental implants) contaminated with bacterial, most efficiently eliminate bacterial biofilms.

MATERIAL AND METHODS

A systematic search was conducted in four electronic databases between January 1, 2010 and October 31, 2022. The search strategy followed the PICOS format and included only in vitro studies completed on either dental implant or titanium disk samples. The assessed outcome variable consisted of the most effective method(s)-chemical or mechanical- removing bacterial biofilm from titanium surfaces. A meta-analysis was conducted, and data was summarized through single- and multi-level random effects model (p < .05).

RESULTS

The initial search resulted in 5260 articles after the removal of duplicates. After assessment by title, abstract, and full-text review, a total of 13 articles met the inclusion criteria for this review. Different decontamination methods were assessed, including both mechanical and chemical, with the most common method across studies being chlorhexidine (CHX). Significant heterogeneity was noted across the included studies. The meta-analyses only identified a significant difference in biofilm reduction when CHX treatment was compared against PBS. The remaining comparisons did not identify significant differences between the various decontamination methods.

CONCLUSIONS

The present results do not demonstrate that one method of decontamination is superior in eliminating bacterial biofilm from titanium disk and implant surfaces.

Adjunctive use of antimicrobial photodynamic therapy in the surgical treatment of periapical lesions: a case series

BACKGROUND

Antimicrobial photodynamic therapy (aPDT) is being used in endodontics to improve orthograde root canal disinfection as an adjunct to standard treatments. Conversely, evidence concerning the application of aPDT in retrograde endodontic surgery is limited. Thus, the aim of the present study was to provide additional data regarding the use of aPDT in the surgical endodontic treatment of periapical lesions.

METHODS

A total of 25 consecutive patients presenting teeth with periapical radiolucency eventually associated with clinical signs and symptoms of apical periodontitis were included. Following access flap completion, osteotomy, mechanical debridement, root apical third resection, and preparation of the root-end cavity, aPDT was applied to decontaminate the surgical site using phenothiazine chloride dye at a concentration of 10 mg/mL and irradiation with a hand-held 100-mW diode laser with a wavelength of 660 ± 10 nm. At the latest follow-up visit, healing was evaluated as successful, uncertain, or failure according to well-established clinical and radiological criteria.

RESULTS

Overall, 31 periapical lesions were treated with aPDT. Healing proceeded uneventfully. The mean follow-up time was 36.19 months, with times ranging from 12 to 85 months. A total of 25 (80.65%) cases were classified as successful, 5 (16.13%) as uncertain, and only one (3.22%) as failure. Irrespective of the treatment outcome, all treated teeth were still functional, with no symptoms reported by the patients.

CONCLUSION

aPDT as an adjunctive treatment modality in the surgical endodontic treatment of periapical lesions showed promising medium-term results associated with preservation of all diseased teeth.

Synergistic Photoantimicrobial Chemotherapy of Methylene Blue-Encapsulated Chitosan on Biofilm-Contaminated Titanium

Intensive efforts have been made to eliminate or substantial reduce bacterial adhesion and biofilm formation on titanium implants. However, in the management of peri-implantitis, the methylene blue (MB) photosensitizer commonly used in photoantimicrobial chemotherapy (PACT) is limited to a low retention on the implant surface. The purpose of this study was to assess enhancive effect of water-soluble quaternary ammonium chitosan (QTS) on MB retention on biofilm-infected SLA (sandblasted, large grid, and acid-etched) Ti alloy surfaces in vitro. The effectiveness of QTS + MB with different concentrations in eliminating Gram-negative A. actinomycetemcomitans or Gram-positive S. mutans bacteria was compared before and after PACT. Bacterial counting and lipopolysaccharide (LPS) detection were examined, and then the growth of human osteoblast-like MG63 cells was evaluated. The results indicated that the synergistic QTS + MB with retention ability significantly decreased the biofilm accumulation on the Ti alloy surface, which was better than the same concentration of 1 wt% methyl cellulose (MC). More importantly, the osteogenic activity of MG63 cells on the disinfected sample treated by QTS + MB-PACT modality was comparable to that of sterile Ti control, significantly higher than that by MC + MB-PACT modality. It is concluded that, in terms of improved retention efficacy, effective bacteria eradication, and enhanced cell growth, synergistically, PACT using the 100 μg/mL MB-encapsulated 1% QTS was a promising modality for the treatment of peri-implantitis.

Electrosprayed calcium silicate nanoparticle-coated titanium implant with improved antibacterial activity and osteogenesis

To ensure clinical success, the implant and the surrounding bone tissue must not only be integrated, but also must not be suspected of infection. In this work, an antibacterial and bioactive nanostructured calcium silicate (CaSi) layer on titanium substrate by an electrospray deposition method was prepared, followed by annealing at 700, 750 and 800 °C to improve the bonding strength of the CaSi coating. The phase composition, microstructure and bonding strength of the CaSi coatings were examined. Human mesenchymal stem cells (hMSCs), Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) species were used to analyze the osteogenic and antibacterial activity of the coatings, respectively. Experimental results showed that the as-prepared CaSi coating was mainly composted of β-dicalcium silicate phase with a particle size of about 300 nm. After annealing, the thickness of the oxidation reaction layer increased obviously from 0.3 μm to 1 μm with increase in temperature, which was confirmed by the cross-sectional morphology and element depth profile. The bonding strength of the coating annealed at 750 °C (19.0 MPa) was significantly higher (p < 0.05) than that of the as-prepared coating (4.4 MPa) and the ISO 13,779 standard (15 MPa). The results of antibacterial efficacy and stem cell osteogenesis consistently elaborated that the 750 °C-annealed coating had higher activity than the as-prepared coating and the Ti control. It is concluded that after annealing at 750 °C, the CaSi nanoparticle-coated Ti implant had good bond strength, osteogenic and antibacterial activity.

Mechanical Biocompatibility, Osteogenic Activity, and Antibacterial Efficacy of Calcium Silicate-Zirconia Biocomposites

Zirconia ceramics with high mechanical properties have been used as a load-bearing implant in the dental and orthopedic surgery. However, poor bone bonding properties and high elastic modulus remain a challenge. Calcium silicate (CaSi)-based ceramic can foster osteoblast adhesion, growth, and differentiation and facilitate bone ingrowth. This study was to prepare CaSi-ZrO₂ composites and evaluate their mechanical properties, long-term stability, in vitro osteogenic activity, and antibacterial ability. The Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria and human mesenchymal stem cells (hMSCs) were used to evaluate the antibacterial and osteogenic activities of implants in vitro, respectively. Results indicated that the three-point bending strength of ZrO₂ was 486 MPa and Young's modulus was 128 GPa, which were much higher than those of the cortical bone. In contrast, the bending strength and modulus of 20% (201 MPa and 48 GPa, respectively) and 30% CaSi (126 MPa and 20 GPa, respectively) composites were close to the reported strength and modulus of the cortical bone. As expected, higher CaSi content implants significantly enhanced cell growth, differentiation, and mineralization of hMSCs. It is interesting to note the induction ability of CaSi in osteogenic differentiation of hMSCs even when cultured in the absence of an osteogenic differentiation medium. The composite with the higher CaSi contents exhibited the greater bacteriostatic effect against E. coli and S. aureus. In conclusion, the addition of 20 wt % CaSi can effectively improve the mechanical biocompatibility, osteogenesis, and antibacterial activity of ZrO₂ ceramics, which may be a potential choice for load-bearing applications.

Comparison of photodynamic therapy with methylene blue associated with ceftriaxone in gram-negative bacteria; an in vitro study

The resistance of microorganisms increases the need for new antimicrobial therapies. The aim of this study was to evaluate the in vitro action of photodynamic therapy and its combination with ceftriaxone in third generation cephalosporin resistant gram-negative bacteria. Clinical strains of Klebsiella pneumoniae, Enterobacter aerogenes and Escherichia coli were obtained, incubated with MB for 15 min combined or not with ceftriaxone and irradiated with fluence of 10 and 25 J/cm². MB internalization was evaluated by confocal microscopy. Cell viability was assessed by counting colony forming units and bacterian metabolism by the resazurin test. MB has been observed within cells, although not in all bacteria. PDT-MB alone and combined with Ceftriaxone reduced bacterial growth by approximately 1 log at 10 J/cm² of fluence and 4 logs by 25 J/cm², with a significant difference from the control group. The reduction in bacterial growth between the treated groups was similar, without significant difference between them. The Resazurin test showed lower bacterial metabolic activity in the treated groups, but it did not allow to observe difference between fluences. It was concluded with this study that the internalization of MB was not observed in all cells of K. pneumoniae, E. aerogenes and E. coli strains. There was less bacterial metabolic activity in the treated groups, with no variation between different fluences. PDT-MB 25 J/cm² alone and combined with Ceftriaxone showed antimicrobial action, but the PDT-MB/Ceftriaxone combination had no potentiating effect.