Management of caries affected dentin (CAD) with resin modified glass ionomer cement (RMGIC) in the presence of different caries disinfectants and photosensitizers

Effect of photodynamic therapy with two photosensitizers on the microtensile bond strength of a universal adhesive to affected dentin

BACKGROUND

This study aimed to evaluate the impact of photodynamic therapy (PDT) using two photosensitizers, methylene blue and indocyanine green, on the microtensile bond strength of a universal adhesive to caries-affected dentin.

METHODS

The occlusal enamel of 60 third molars was cut to expose the inner one-third of the dentin. Artificial caries were induced through a pH cycling process. The samples were divided into three groups: M (Methylene blue+ diode laser), I (Indocyanine green agents+ diode laser irradiation), and control. Each group was further divided into two subgroups according to the adhesive protocol (self-etch, total-etch). After restoring with Gradia composite resin, teeth were sectioned and exposed to 5000 thermal cycles. Microtensile bond strength was measured using a universal testing machine. The data were subjected to two- and one-way ANOVA and paired comparisons were performed by the Tamhane and Tukey tests.

RESULTS

The study found significant effects of the photosensitizer, etching pattern, and their interactions on the microtensile bond strength of composite resin to caries-affected dentin (P < 0.001). In the self-etching mode, PDT with indocyanine green exhibited significantly higher bond strength values compared to PDT with methylene blue (P = 0.001) and the control groups (P < 0.001). However, no significant differences were observed in the total-etch mode. (P = 0.54).

CONCLUSIONS

The etching mode played a more significant role in the bond strength when using the universal adhesive alongside PDT with methylene blue and indocyanine green. Employing two photosensitizers in PDT during the self-etch mode significantly increased the bond strength values.

Phycocyanin-loaded silver nanoparticles activated with photodynamic therapy and Nd: YAG laser for caries-affected dentin disinfection: Impact on Streptococcus mutans survival rate and shear bond strength to the tooth-colored restorative material

AIMS

To assess the impact of various cavity disinfectants PC-PDT (Phycocyanin activated by Photodynamic therapy), PC@AgNPs-PDT (Phycocyanin and silver nanoparticles activated by PDT), and Nd: YAG laser on the survival rate of S.mutans and the bond integrity of composite restoration METHODS: Sixty human mandibular molars that scored 4 and 5 based on ICDAS criteria were included. The infected dentin was removed while the CAD was preserved based on visual, tactile, and staining assessment. S.mutans were cultured on the CAD of twenty samples. All the specimens were indiscriminately distributed into four groups based on cavity disinfection (n=20 each includes n = 5 each group incubated with S.mutans) Group 1: CHX, Group 2: Nd:YAG laser, Group 3: PC-PDT and Group 4: PC@AgNPs-PDT. S.mutans survival rate was assessed for each group(n = 5). Forty samples underwent composite bonding for SBS and failure mode assessment using universal testing machine (UTM) and stereomicroscope. The calculations for the mean and standard deviation (SD) and their comparison among different groups were performed using a one-way analysis of variance (ANOVA) and the Tukey post hoc test (p ≤ 0.05) RESULTS: CAD surface treated disinfected with PC@AgNPs-PDT yielded the lowest survival rates (0.13 ± 0.05 CFU/ml) and highest SBS (17.23 ± 1.45 MPa). Group 1 (CHX) unveiled the highest survival rate of S.mutans (0.33 ± 0.12 CFU/ml). However, Group 2 (Nd:YAG Laser) (11.87 ± 0.67 MPa) presented the lowest SBS CONCLUSION: The combination of Phycocyanin loaded with silver nanoparticles and activated with Photodynamic therapy demonstrates the highest antimicrobial potential and bond strength of composite restorations.

Orthodontic adhesive loaded with different proportions of ZrO2 silver-doped nanoparticles: An in vitro μTBS, SEM, EDX, FTIR, and antimicrobial analysis

Zirconium dioxide silver-doped nanoparticles (ZrO2AgDNPs) impacts the adhesive material in terms of its physical characteristics, antimicrobial properties, degree of conversion (DC), and micro-tensile bond strength (μTBS) of orthodontic brackets to the enamel surface. A comprehensive methodological analysis utilizing a range of analytical techniques, including scanning electron microscopy coupled with energy-dispersive x-ray spectroscopy (EDX), Fourier-transform infrared (FTIR) spectroscopy, DC analysis, and μTBS testing. A light-curable orthodontic adhesive, specifically Transbond XT, was combined with ZrO2AgDNPs at 2.5% and 5%. As a control, an adhesive with no incorporation of ZrO2AgDNPs was also prepared. The tooth samples were divided into three groups based on the weightage of NPs: group 1: 0% ZrO2AgDNPs (control), group 2: 2.5 wt% ZrO2AgDNPs, and group 3: 5 wt% ZrO2AgDNPs. EDX graph demonstrated silver (Ag), Zirconium (Zr), and Oxygen (O2), The antibacterial efficacy of adhesives with different concentrations of NPs (0%, 2.5%, and 5%) was assessed using the pour plate method. The FTIR spectra were analyzed to identify peaks at 1607 cm-1 corresponding to aromatic CC bonds and the peaks at 1638 cm-1 indicating the presence of aliphatic CC bonds. The μTBS was assessed using universal testing machine (UTM) and bond failure of orthodontic brackets was seen using adhesive remanent index (ARI) analysis. Kruskal-Wallis test assessed the disparities in survival rates of Streptococcus mutans. Analysis of variance (ANOVA) and post hoc Tukey multiple comparisons test calculated μTBS values. The lowest μTBS was observed in group 1 adhesive loaded with 0% ZrO2AgDNPs (21.25 ± 1.22 MPa). Whereas, the highest μTBS was found in group 3 (26.19 ± 1.07 MPa) adhesive loaded with 5% ZrO2AgDNPs. ZrO2AgDNPs in orthodontic adhesive improved μTBS and has acceptable antibacterial activity against S mutans. ZrO2AgDNPs at 5% by weight can be used in orthodontic adhesive alternative to the conventional method of orthodontic adhesive for bracket bonding. RESEARCH HIGHLIGHTS: The highest μTBS was found in orthodontic adhesive loaded with 5% ZrO2AgDNPs. ARI analysis indicates that the majority of the failures fell between 0 and 1 among all investigated groups. The colony-forming unit count of S. mutans was significantly less in orthodontic adhesive loaded with nanoparticles compared with control. The 0% ZrO2AgDNPs adhesive showed the highest DC.

Remineralizing pretreatment using casein phosphopeptide-amorphous calcium phosphate fluoride, self-assembling peptide, and nanohydroxyapatite gel activation via invisible infrared light on the dentin microhardness and micro shear bond strength to the composite restoration

AIM

Different remineralizing pretreatments Casein phosphopeptide-amorphous calcium phosphate fluoride (CPP-ACPF), tricalcium phosphate fluoride (TCP-F), self-assembling peptide (SAP) P11-4 and 10 % Nanohydroxyapatite (nHA) gel activation via invisible infrared light on the dentin microhardness (MH) and micro shear bond strength (µSBS) of composite restoration.

METHODS

Seventy-five human molar teeth were collected and the dentinal surface of all the samples was exposed to different demineralizing solutions. (n = 15) Group 1 (demineralized dentin), Group 2 (CPP ACP), Group 3 (TCP-F), Group 4 (SAP P11-4), Group 5 (nHA gel activation via invisible infrared light). MH assessment was performed using Vickers hardness. Each group of 10 samples was subjected to composite restoration buildup and µSBS were tested. The debonded samples were then observed under a stereo-microscope for failure analysis. ANOVA was conducted, along with Tukey's post hoc analysis, to examine the µSBS of composite and MH of the remineralized surface.

RESULTS

nHA gel activation via invisible infrared light pretreated specimens showed the maximum outcomes of surface hardness (331.2 ± 77.3) and bond strength (10.38 ± 2.77). However, Group 4 (SAP P11-4) (148.3 ± 29.2) remineralized dentin displayed minimum scores of MH and µSBS (5.88 ± 1.01).

CONCLUSION

Remineralizing pretreatment nHA gel activation via invisible infrared light and casein phosphopeptide-amorphous calcium phosphate fluoride seem to improve the dentin MH and µSBS of the composite restoration.

Effect of Casein Phosphopeptide-Amorphous Calcium Phosphate, Proanthocyanidin, Carbon Dioxide Laser Remineralization on the Bond Integrity of Composite Restoration Bonded to Caries-Affected Dentin

Objective: Assessment of different remineralizing pretreatment casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), proanthocyanidin (PA), carbon dioxide laser (CO2), eggshell solution (ES) on the shear bond strength (SBS) of resin composite bonded to remineralized carious-affected dentin (CAD). Materials and methods: Eighty human molars were collected with occlusal caries that extended about halfway into the dentin. Using a water-cooled, low-speed cutting saw, a flat, mid-coronal dentin surface was exposed. CAD was differentiated from healthy dentin. Based on the remineralizing agent used on the CAD surface, the teeth were arbitrarily allocated into five groups (n = 10). Group 1: no remineralizing agent, Group 2: CPP-ACP, Group 3: 6.5% PA solution, Group 4: CO2 laser, and Group 5: ES solution. All samples were bonded to composite and light cured and thermocycled. SBS and failure mode analysis were performed using universal testing and stereomicroscope 40 × . Using SPSS, SBS, and failure mode data were analyzed using analysis of variance and Tukey's honesty significant difference (HSD) test Results: Group 3 (6.5% PA solution; 15.59 ± 1.44 MPa) samples established the maximum bond integrity. Nevertheless, Group 1 (No remineralizing agent; 11.19 ± 1.21 MPa) exhibited the minimum outcome of bond strength. Intergroup comparison analysis showed that Group 1 (No remineralizing agent), Group 2 (CPP-ACP), and Group 4 (CO2 laser) established comparable values of bond strength (p > 0.05). Likewise, Group 3 (6.5% PA solution) and Group 5 (EA solution) also revealed equivalent bond integrity (p > 0.05). Conclusions: PA and ES are considered potential remineralizing agents used for caries-affected dentin surfaces in improving bond integrity to composite resin. However, further studies are advocated to extrapolate the findings of this study.

Canal disinfection using Nd: YAG Laser, synchronized microbubble-photodynamic activation, and carbon quantum dots on microhardness, smear layer removal, and extrusion bond strength of zirconia post to canal dentin. An invitro scanning electron microscopic analysis

Evaluation of the impact of the latest root canal disinfectant, that is carbon quantum dots (CQDs), synchronized microbubble-photodynamic activation (SYMPA), and Nd: YAG laser along with ethylenediaminetetraacetic acid (EDTA) as a final irrigant on the Marten hardness (MH), smear layer (SL) removal, and extrusion bond strength (EBS) of zirconia post to the canal dentin. Eighty intact single-rooted premolars were obtained and disinfected using 0.5% chloramine-T solution. Root canal preparation was performed using ProTaper files followed by obturation. The post space was prepared for prefabricated zirconia post and all the teeth were randomly divided into four groups based on the disinfection used (n = 20 each) Group 1: 5.25% NaOCl + 17% EDTA (Control), Group 2: Nd: YAG laser + 17% EDTA, Group 3: SYMPA + 17% EDTA, and Group 4: CQDs + 17% EDTA. MH, SL removal, and EBS of zirconia post-bonded to root dentin were performed using a microhardness tester, scanning electron microscope (SEM), and universal testing machine, respectively. Both intragroup and intergroup comparisons were performed using one-way analysis of variance (ANOVA) and posthoc-Tukey test for significant difference (p < .05). Group 2 samples (Nd: YAG laser + 17% EDTA) (0.24 ± 0.06 GPa) exhibited highest values of MH. Samples in group 3 (SYMPA + 17% EDTA) treated teeth unveiled the lowest MH scores (0.13 ± 0.02 GPa). Moreover, the coronal third of Group 3 specimens (SYMPA and 17% EDTA) (1.54 ± 0.31) eliminated SL from the canal with the greatest efficacy as well as presented the highest EBS (10.13 ± 0.69 MPa). However, the apical third of Group 1 samples (5.25% NaOCl + 17% EDTA) (2.95 ± 0.33) exhibited the least efficient elimination of SL from the radicular dentin as well as the lowest bond strength (5.11 ± 0.19 MPa) of zirconia post to the dentin. The SYMPA technique with 17% EDTA proved highly effective in removing the SL from canal dentin and enhancing the EBS of zirconia posts. The least preferable method for SL removal and MH improvement was found to be 5.25% NaOCl + 17% EDTA. CQDs and Nd: YAG laser demonstrated satisfactory smear layer removal properties from the canal, along with achieving appropriate bond strength of zirconia posts. RESEARCH HIGHLIGHTS: Nd: YAG laser and 17% EDTA as canal disinfectant exhibited the highest values of MH. Specimens irrigated with SYMPA and 17% EDTA eliminated SL from the canal with the greatest efficacy. The coronal third of Group 3 (SYMPA + 17% EDTA) samples unveiled the highest zirconia post-bond integrity score to the canal dentin. Cohesive failure was a dominant failure type among different experimental groups.

Adhesive Bond Strength of Restorative Materials to Caries-Affected Dentin Treated with Antimicrobial Photodynamic Therapy: A Systematic Review and Meta-Analysis

Objective: This systematic review aimed to evaluate the adhesive bond strength of restorative materials to caries-affected dentin (CAD) treated with antimicrobial photodynamic therapy (aPDT) in comparison with conventional chemical disinfectants. Methods: Three databases, including the Web of Science, Scopus, and PubMed, were searched to address the focused question: "What is the effect of aPDT compared to conventional chemical disinfection techniques on the adhesive bond strength of restorative materials to CAD?." Search keywords included "dentin*" "adhes bond*" "caries-affected dentin" "photodynamic "photochemotherapy" "photosensitizing agent" "phototherapy" "photoradiation" "laser" "light activated" "photoactivated." A fixed-effects model was used in each meta-analysis and the inverse variance was used to calculate the standard mean difference (SMD). For evaluating the statistical heterogeneity, the Cochrane's Q test and the I2 statistics were used. The risk of bias was evaluated based on the Cochrane Collaboration's tool. Results: Fourteen studies were included in the qualitative as well as quantitative analysis. The results of the meta-analyses exhibited an SMD of 2.38% [95% confidence interval (CI): 2.03-2.73; p < 0.00001], indicating a statistically significant difference in the shear bond strength scores between the tested group (samples treated with aPDT) and the control group (i.e., favoring the sound dentin and/or conventional chemical disinfectants). Contrarily, an SMD of -1.46% (95% CI: -2.04 to -0.88; p < 0.00001) and -0.37% (95% CI: -0.70 to -0.03; p = 0.03) was observed, indicating a statistically significant difference in the microtensile bond strength (μTBS), as well as microleakage scores between the tested group (favoring the samples treated with aPDT) and the control group (i.e., sound dentin and/or conventional chemical disinfectants). Conclusions: Adhesive bond strength of restorative materials to CAD treated with conventional chemical disinfectants showed superior outcomes compared to photodynamic therapy (aPDT).

Canal disinfection using photo-chemically activated micro-bubble emulsion, Emblica officinalis, and Nd: YAP laser on smear layer and push-out bond strength of resin-based root canal sealer to the radicular dentin

AIMS

Evaluation of the effects of the latest root canal disinfectants i.e., Micro-bubble emulsion (MBE), Neodymium-doped yttrium aluminum perovskite (Nd: YAP), Emblica officinalis (E. officinalis) on the removal of smear layer (SL) and push out bond strength (PBS) of resin-based root canal sealer to the radicular dentin.

METHODS

The coronal portion of sixty single-rooted human mandibular premolar teeth was precisely sectioned at the cementoenamel junction. The canals were prepared to utilize ProTaper universal rotary files till F3. All the study specimens were divided into four groups based on the disinfection regime (n = 15) Group 1: 5.25% NaOCl, Group 2: MBE, Group 3: Nd: YAP laser and Group 4: E. officinalis extract. All the canals were then finally irrigated using 17% EDTA solution as a final disinfecting agent. SL removal assessment was performed on five samples from each group using a scanning electron microscope (SEM). Ten samples from each group were then filled with root canal filling material and the roots were sectioned. Push-out test and failure mode analysis were performed using the universal testing machine (UTM) and stereomicroscope respectively. The mean scores of PBS and SL removal were compared using a one-way analysis of variance (ANOVA) and Post Hoc Tukey's HSD test p = 0.05.

RESULTS

Group-2 (MBE + EDTA) coronal section (1.50 ± 0.23) exhibited the most effective eradication of SL from the canal space. The apical third of Group-1 (NaOCl+EDTA) (2.68 ± 0.82) samples demonstrated the least effective removal of SL from the radicular canal. The maximum score of PBS of AH plus sealer to the canal dentin was exhibited by the coronal section of Group-2 (MBE + EDTA) (9.55 ± 0.45 MPa) samples. However, the apical third of Group-1 (NaOCl+ EDTA) specimens (5.16 ± 0.32 MPa) demonstrated the minimum EBS.

CONCLUSION

MBE+ EDTA displayed better smear layer removal and bond integrity of AH plus sealer to the root canal dentin. Nd: YAP+ EDTA laser and E.officinalis displayed comparable outcomes to that of control NaOCl+ EDTA.

The efficacy of antimicrobial photodynamic therapy in the disinfection of coronal and radicular dentine of primary teeth: A systematic review and meta-analysis

BACKGROUND

Optimal endodontic disinfection by means of conventional root canal treatment of primary teeth remains a challenge. Recently, antimicrobial photodynamic therapy (aPDT) has been proposed as an adjunct to conventional endodontic treatment for microbial disinfection. The purpose of this review is to critically appraise and synthesize the currently-available evidence about the antimicrobial efficacy of aPDT (antimicrobial photodynamic therapy) when used as an adjunct to traditional root canal therapy.

MATERIALS AND METHODS

The focused question was ''In primary teeth needing root canal treatment (participants), is adjunct aPDT (intervention) more effective in disinfecting coronal and radicular dentine (outcomes) than root canal treatment alone (control)?'. The electronic research databases PubMED/Medline, ISI Web of Knowledge, Embase and CENTRAL (Cochrane Central Register of Controlled Trials) using relevant keyword phrases including 'antimicrobial photodynamic therapy', 'primary teeth', 'deciduous teeth', and 'endodontic treatment'. Original studies that described endodontic treatment of primary teeth or dentine using aPDT in comparison to conventional endodontic treatment were included. Case reports, reviews and other non-comparative studies were excluded. The literature search and quality assessment were carried out by two reviewers independently.

RESULTS

Ultimately, 9 studies were included in this review. Overall, majority of the studies concluded that adjunct aPDT improves the antimicrobial efficacy of conventional root canal therapy. However, several sources of bias were found in the studies.

CONCLUSION

Within the limitations of the studies, it is concluded that aPDT is a suitable adjunct to improve the disinfection of conventional root canal treatment. However, future studies should focus on the clinical outcomes, in relation to the reduction of microbial counts to ascertain the efficacy of aPDT in disinfection of primary dentine.

Knowledge and application of antimicrobial photodynamic therapy among restorative dentist in Saudi Arabia

BACKGROUND

The aim was to identify the restorative dentist, knowledge and application of Antimicrobial photodynamic therapy (aPDT) in dental practice; and to provide an overview of the potential challenges faced by restorative dentists (RD) in Saudi Arabia.

METHODS

A 15-item cross sectional study questionnaire was distributed through online portal to assess the knowledge, and practice of RD towards aPDT and its practice. The questionnaire consisted of 3 sections, exploring the demographics of participants, knowledge, application and perception of aPDT using yes/no response and Likert scale. Response means, frequencies, and chi-square tests to compare subgroups based on gender, education level, and practice experience.

RESULTS

Out of 500 participants, 375 completed the survey forms (75% response rate). The majority was male (68%) with a mean age of 46 years. Respondents demonstrated a moderate level of knowledge (60.5%). Only 33% expressed confidence in aPDT as a standalone treatment, while 67% showed limited referrals to specialists. However, 88.5% expressed interest in receiving training and attending workshops for aPDT therapy. Education and experience significantly influenced overall knowledge question responses (p = 0.031).

CONCLUSION

Majority of restorative dentists demonstrated a moderate understanding of the role of aPDT in dentistry. More than two thirds of respondents (77%) believed that aPDT is an effective adjuvant therapy. Increased experience (> 10 years) and education (Post-graduates) showed higher application of aPDT. The study reveals the potential for incorporating aPDT knowledge into restorative dental practices, particularly among general dentists.

Micro Tensile bond strength and microleakage assessment of total-etch and self-etch adhesive bonded to carious affected dentin disinfected with Chlorhexidine, Curcumin, and Malachite green

AIMS AND OBJECTIVES

Assessment of micro tensile bond strength (microTBS) and micro-leakage scores of total-etch adhesive (TAE) and self-etch adhesive (SAE) bonded to carious affected dentin (CAD) sterilized using different cavity disinfectant (curcumin photosensitizer (CP) and malachite green (MG) and Chlorhexidine (CHX) in comparison to no disinfection (ND) control group.

MATERIALS AND METHODS

One hundred and twenty human molars having International Caries Detection and Assessment System (ICDAS) scores of 4 and 5 were included. Visual inspection, dental explorer hardness testing, and caries detector solution using 5% basic Fuchsin dye solution was applied to dentin to identify the CAD surface. All the specimens were divided into four groups (n = 30) according to the cavity disinfectants used. Group A: 2% CHX, Group B: CP, Group C: MG, and Group D: ND. Each group was further divided into two subgroups (n = 15) based on the adhesion protocol. Groups A1, B1, C1, and D1 were held using TEA, and groups A2, B2, C2, and D2 were adhered using SEA system. The composite material was then built in 2 mm increments and then cured with light. MicroTBS and failure mode assessment using a universal testing machine (UTM) and stereomicroscope at a 40X magnification was performed on 10 samples from each subgroup. The microleakage assessment was performed using a dye penetration test on five samples from each group. ANOVA and Tukey post-hoc tests were used to compare means and standard deviation (SD) of bond strength and microleakage (p < 0.05). RESULTS The maximum microTBS was displayed by A1= CHX and TEA (13.28± 1.01 MPa). The lowest bond scores were demonstrated by C2= MG and SEA (5.98±0.44 MPa). The highest micro-leakage was exhibited by C1= MG and TEA (58.32 ± 2.11 nm). Whereas, the lowest micro-leakage values were displayed by A2= CHX and SEA (24.34± 1.11 nm).

CONCLUSION

Chlorohexidiene displayed better bond strength and the lowest microleakage scores with Total-etch adhesive and Self-etch adhesives when used as a cavity disinfectant. Total-etch adhesives performed better in terms of microTBS scores whereas self-etch adhesives displayed superior seal ability within the same disinfectant group.

The effect of ascorbic acid and cranberry on the bond strength, surface roughness, and surface hardness of bleached enamel with hydrogen peroxide and zinc phthalocyanine activated by photodynamic therapy

AIM

To evaluate the effect of different bleaching methods 40% (hydrogen peroxide) HP and Zinc Phthalocyanine (ZP) activated by photodynamic therapy (PDT) with the utilization of diverse procedures of reversal (10% ascorbic acid and 6% cranberry solution) on bond values, surface microhardness and surface roughness of bleached enamel surface.

MATERIAL AND METHODS

An aggregate of 60 extracted human mandibular molars was gathered and the buccal surface of each specimen was exposed to 2 mm of enamel surface for bleaching with chemical and photoactivated agents with the use of reversal solutions. Specimens were divided into six groups (n = 10) at random- Group 1: samples bleached with 40% HP with 10% ascorbic acid (reversal agent), group 2: ZP activated by PDT with 10% ascorbic acid (reversal agent), group 3: 40% HP with 6% cranberry solution as a reversal agent, group 4: ZP activated by PDT with 6% cranberry solution, group 5: 40% HP and group 6: ZP activated by PDT with no reversal agents. Resin cement restoration was performed via etch and rinse technique and SBS was estimated by using the universal testing machine, SMH by using Vickers hardness tester, and Ra by stylus profilometer. Statistical analysis was executed using the ANOVA test and the Tukey multiple tests (p<0.05).

RESULTS

Enamel surface bleached with 40% HP reversed with 10% ascorbic acid displayed the highest SBS while 40% HP with no reversal agent use showed the least SBS. For SMH, ZP activated by PDT when applied on the enamel surface and reversed with 10% ascorbic acid showed the highest SMH while when bleached with 40% HP and reversed with 6% cranberry solution showed the least SMH value. For Ra, Group 3: samples bleached with 40% HP with 6% cranberry solution as reversal agent showed the highest Ra value while bleaching of enamel surface with ZP activated by PDT with 6% cranberry displayed the least Ra value.

CONCLUSION

Bleached enamel surface with Zinc Phthalocyanine activated by PDT with the application of 10% ascorbic acid as reversal solution has demonstrated the highest SBS and SMH with acceptable surface roughness for bonding adhesive resin to the enamel surface.

The adhesive strength of fiber post-to-canal dentin with Aniline green, Fotoenticine activated by PDT, green tea, and ozone as a final irrigant

AIM

The effect of novel final disinfection protocols Malachite green (MG), Fotoenticine® (FTC), Green tea extract (GTE), and Ozonated water (OW) on the bond strength of prefabricated glass fiber posts (PGFP) adhered to canal dentin.

MATERIAL AND METHOD

The canals of fifty premolars with closed apices were cleansed and obturated. The specimens were randomly assigned to one of five groups based on the final irrigant used, with the control group receiving NaOCl+EDTA and the experimental groups receiving MG, FTC, OW, and GTE. The GFP was cemented with a self-etching, dual-cure paste; the bond strength was estimated with a universal testing machine; and failure analysis was conducted with a stereomicroscope.

RESULTS

The highest PBS was observed in the coronal third of Group 4 (using ozonated water as the final irrigant), whereas the lowest bond integrity was observed in the apical section of Group 2 (1.02-0.54 MPa) using Malachite green as the final irrigant. Group 1, Group 4, and Group 5 exhibited no significant difference in the bond integrity of GFP to dentin when compared to Group 2 (p>0.05). In addition, comparable bond score values were obtained for Groups 2 and 3 (p>0.05).

CONCLUSION

The results of this study suggest that OW and GTE may be effective final disinfectants for root canals, as they increase the bond strength of resin-luting cement.

Dentin disinfection and adhesive bond strength using modified photoactivated carbon nanoparticles

AIMS

The present study aimed to investigate the bond integrity and disinfection efficacy of Methylene blue(MB) alone, MB-PDT (Photodynamic therapy), MB@ carbon nanoparticles (CP)-PDT, and Cr, Cr: YSGG (ECL) against lactobacilli in Caries-affected dentin (CAD) MATERIAL AND METHODS: Methods consisted of Shear bond strength (SBS), Scanning electron microscopy (SEM), energy dispersive X-ray (EDX), methods of disinfection, and failure analysis. CAD samples were prepared and biofilm formed on the specimens randomly allocated into five groups based on disinfection. Group 1: CHX; Group 2: MB; Group 3: MB-PDT: group 4: MB@CP-PDT and group 5: ECL. After disinfection Colony forming units were measured and specimens were restored and positioned under a universal testing machine (UTM). Failure analysis was performed using a stereomicroscope. The difference in survival rate was assessed using the Kruskal-Walis test. Mean and standard deviation for bond values after different methods of disinfection was evaluated using analysis of variance (ANOVA) and Post Hoc Tukey. The significance level was p<0.05 RESULTS: Morphological analysis revealed that CPs under SEM are flat discs with edged irregular shapes. EDX analyses show a spike indicating carbon particles by more than 95%. MB@CP-PDT displayed the highest reduction in lactobacillus levels in comparison to the other disinfection methods. The highest SBS was exhibited by the CAD sample disinfected with ECL. The lowest SBS values in CAD specimens after cavity cleansing with MB alone. The predominant failure type in CAD disinfected with MB alone, ECL CHX, MB-PDT, and MB@CP-PDT was adhesive.

CONCLUSION

The use of MB@CP-PDT showed high antibacterial potency against lactobacillus but demonstrated bond values similar to CHX. Use of Er, Cr: YSGG showed considerable effectiveness against lactobacillus along with the highest bond values.

Efficacy of methylene blue and curcumin mediated antimicrobial photodynamic therapy in the treatment of indirect pulp capping in permanent molar teeth

PURPOSE

This study aimed to evaluate the adhesive bond strength and antibacterial efficacy of methylene blue (MB)-mediated antimicrobial photodynamic therapy (aPDT) and curcumin (CUR)-mediated aPDT versus the conventional disinfectants, such as chlorhexidine gluconate (CHX) gel and sodium hypochlorite (NaOCl), for indirect pulp capping (IPC) treatment of permanent molars.

METHODS

One Hundred grossly carious human permanent molars were collected through non-traumatic extraction. All specimens were embedded in polyvinyl cross-sections to the cemento-enamel junction. The cavity preparation was conducted by grinding the samples using silicon carbide discs. After culturing Streptococcus mutans (S. mutans), a 10 µL of S. mutans suspension (10⁶ colony forming units/mL) was transferred in each tooth cavity and anaerobically incubated for 48 hours at 37°C. All specimens were randomly divided into 5 groups: Group-I: samples treated IPC; Group-II: samples treated with 2% CHX gel; Group-III: samples treated with 6% NaOCl; Group-IV: irradiation of prepared cavity with MB-mediated aPDT; and Group-V: irradiation of prepared cavity with CUR-mediated aPDT. After disinfection methods, the universal adhesive was used, and all specimens were restored using giomer. Eventually, confocal laser scanning microscopy, shear bond strength (SBS), micro-tensile bond strength (μTBS), four-point bending strength (4P-BS) analyses were performed, and the data were analyzed statistically.

RESULTS

At baseline, the highest SBS (48.8 ± 6.5 MPa), μTBS (54.3 ± 3.9 MPa), and 4P-BS (123 ± 32 MPa) scores were demonstrated by the samples treated with MB-mediated aPDT. However, after 12 months of storage, the highest SBS (42.3 ± 3.9 MPa) and μTBS (45.2 ± 6.6 MPa) scores were shown by samples treated with MB-mediated aPDT, while CUR-mediated aPDT treated samples demonstrated the highest 4P-BS scores (70 ± 18 MPa). Moreover, the highest antibacterial activity against S. mutans was shown by the samples treated with MB-mediated aPDT.

CONCLUSIONS

The application of aPDT, especially MB-mediated, demonstrated superior SBS, μTBS, and 4P-BS values as well as antibacterial activity against S. mutans as compared to 2% CHX gel and 6% NaOCl as cavity disinfectants for IPC treatment of permanent molars.

Different cavity disinfectant efficacy against S.Mutans and shear bond strength of caries affected dentin bonded to resin restoration

AIMS

The existing study aimed to assess the survival rate of S.mutans and shear bond strength (SBS) of resin adhesive restoration bonded to carious affected dentin (CAD) after using different cavity disinfectants (Chitosan, Fotoenticine®, and CO₂ laser) in comparison to Chlorhexidine (CHX).

MATERIALS AND METHODS

The study included human mandibular molars assessed on International Caries Detection and Assessment System (ICDAS) score 4 and 5. The cusp part of the clinical crown was cut off until the reduction reaches the central fossa while being continuously supplied with water coolant till the tooth cementoenamel junction (CEJ). The root sections were embedded in polymethyl methacrylate acrylic resin followed by culturing S.mutans biofilm on the CAD surface. Specimens were arbitrarily allocated into four groups(n = 10) based on the type of disinfection. Group 1 (2% CHX), Group 2 (Chitosan), Group 3 (Fotoenticine), and Group 4 (CO₂ laser). S.mutans survival rate was assessed and CAD was restored with a composite restorative material. Thermoocycling of the samples was performed and a universal testing machine (UTM) and Stereomicroscope were used to identify bond integrity and type of fracture. ANOVA and Tukey multiple comparison tests were used to assess SBS. Data on the survival rate of S. mutans were compared between groups using the nonparametric Kruskal-Wallis test RESULTS: Outcomes revealed that Group 1 (CHX) displayed the highest survival rate (0.65±0.10). However, lowest survival rate was demonstrated by Group 3 (Fotoenticine) treated specimens (0.25±0.06). It was also discovered that CHX unveiled highest bond strength values (21.48±1.39 MPa). Nevertheless, Group 2 (Chitosan) showed lowest SBS (11.01±1.00 MPa). Intergroup comparison analysis presented that group 1, and group 4 (Co2 laser) (17.76±0.41 MPa) displayed no significant difference in their bond integrity achieved. (p>0.05). However, group 3 (Fotoenticine) (16.28±0.51 MPa) and group 2 demonstrated comparable outcomes of SBS. (p>0.05) CONCLUSION: The use of CHX and CO₂ lasers as disinfectants on the CAD surface resulted in a positive impact on the SBS of resin composite, according to the study's findings. However, it is worth noting that Fotoenticine exhibited better antimicrobial efficacy against S. mutans.

The role of the light source in antimicrobial photodynamic therapy

Antimicrobial photodynamic therapy (APDT) is a promising approach to fight the growing problem of antimicrobial resistance that threatens health care, food security and agriculture. APDT uses light to excite a light-activated chemical (photosensitiser), leading to the generation of reactive oxygen species (ROS). Many APDT studies confirm its efficacy in vitro and in vivo against bacteria, fungi, viruses and parasites. However, the development of the field is focused on exploring potential targets and developing new photosensitisers. The role of light, a crucial element for ROS production, has been neglected. What are the main parameters essential for effective photosensitiser activation? Does an optimal light radiant exposure exist? And finally, which light source is best? Many reports have described the promising antibacterial effects of APDT in vitro, however, its application in vivo, especially in clinical settings remains very limited. The restricted availability may partially be due to a lack of standard conditions or protocols, arising from the diversity of selected photosensitising agents (PS), variable testing conditions including light sources used for PS activation and methods of measuring anti-bacterial activity and their effectiveness in treating bacterial infections. We thus sought to systematically review and examine the evidence from existing studies on APDT associated with the light source used. We show how the reduction of pathogens depends on the light source applied, radiant exposure and irradiance of light used, and type of pathogen, and so critically appraise the current state of development of APDT and areas to be addressed in future studies. We anticipate that further standardisation of the experimental conditions will help the field advance, and suggest key optical and biological parameters that should be reported in all APDT studies. More in vivo and clinical studies are needed and are expected to be facilitated by advances in light sources, leading to APDT becoming a sustainable, alternative therapeutic option for bacterial and other microbial infections in the future.

Adhesive bond of Bioactive and bulk fill resin to disinfected caries affected dentin (lactobacillus specie) with laser and photodynamic therapy

AIMS

To evaluate the antimicrobial effectiveness of cavity disinfectants chlorhexidine gluconate (CHX), Er, Cr, YSGG laser (ECL), and curcumin photosensitizer (CP) against Lactobacillus and shear bond strength (SBS) of Bioactive (BA) and bulk fill composite (BFC) restorative material bonded to carious affected dentin (CAD).

MATERIALS AND METHODS

Sixty human mandibular molars scored 4 and 5 on the International Caries Detection and Assessment System (ICDAS) were included. After inoculating the specimens with lactobacillus specie all the samples were arbitrarily divided into three groups based on the disinfection regime used (n=20). Groups 1 and 2: CAD disinfection using ECL, Groups 3 and 4: CAD disinfection using CP, and Groups 5 and 6: CAD disinfection using CHX. After cavity sterilization, the survival rate was estimated and each group was further divided into two sub-groups based on the restorative material used. Groups 1, 3, and 5 (n = 10) were restored using BFC restorative material, and groups 2, 4, and 6 (n = 10) were restored using a conventional bulk-fill resin material. A universal testing machine (UTM) was used to determine the SBS and debonded surfaces were examined under a stereomicroscope to determine the modes of failure. Kruskal-Walis, ANOVA, and Post Hoc Tukey were applied to investigate the survival rate and bond strength values.

RESULTS

ECL group displayed the highest survival rate (0.73±0.13) of Lactobacillus. The least survival rate (0.17±0.09) was demonstrated by CP activated by PDT. Group 1 (ECL+ BA) treated specimens exhibited the maximum value of SBS (18.31 ± 0.22 MPa). However, group 3 (CP + BA) revealed the minimum values of bond strength (14.05 ± 1.02 MPa). The intergroup comparison revealed that group 1, group 2 (ECL+BFC) (18.11 ± 0.14 MPa), group 5 (CHX+ BA) (18.14 ± 0.36 MPa), and group 6 (CHX+BFC) (18.18 ± 0.35 MPa) displayed comparable outcomes of bond integrity (p>0.05).

CONCLUSION

Caries-affected dentin disinfected with Er, Cr: YSGG, and chlorhexidine improve bond scores of bioactive and conventional bulk-fill restorative material.

Effectiveness of final cavity disinfectant Terminalia chebula, Malachite, and Indocyanine green, against E. faecalis and on the bond interface of fiber post to radicular dentin

AIMS

Evaluation of antimicrobial efficacy of contemporary disinfection Malachite green (MG), Terminalia chebula (T. chebula), and Indocyanine green (ICG)) against E. faecalis and their effect on push-out bond strength (PBS) of glass fiber post (GFP) bonded to root dentin in comparison to conventional irrigation used (Sodium hypochlorite (NaOCl) + Ethylene diamine tetraacetic acid (17% EDTA).

MATERIALS AND METHODS

Root canal treatment was initiated on sixty human single-rooted premolars and working length was established. The canals were enlarged using ProTaper universal system till F3. The prepared canals were obturated with Gutta-percha (GP) and AH Plus sealer followed by post-space preparation. Twenty canals contained a standard strain of E. faecalis (n=5 in each group) cultured overnight at 37 °C in BHI broth. All the samples were randomly allocated into four groups based on post-space irrigation. (n = 10) Group 1: 5.25% NaOCl+17% EDTA (Control), Group 2: 5.25% NaOCl + ICG, Group 3: 5.25% NaOCl + MG and Group 4: 5.25% NaOCl + T. chebula. Survival rates of E. faecalis were evaluated on the twenty specimens. GFP was placed on the remaining samples using self-etch dual-cure pastes and sectioning was performed in 1 mm thick slices. PBS and failure mode were analyzed using a universal testing machine and stereomicroscope. One-way analysis of variance (ANOVA) and Tukey multiple comparison t-tests were used for data analysis. (p = 0.05).

RESULTS

5.25% NaOCl+17% EDTA demonstrated (0.11±0.01 CFU/mL) the lowest survival rate of E. faecalis. However, Group 2 (5.25% NaOCl + ICG) exhibited the highest survival rate (0.52 ± 0.10). Furthermore, the coronal third of group 4 (5.25% NaOCl + T. chebula) (8.71±0.25 MPa) specimens demonstrated the highest PBS of GFP. However, an apical section of group 2 samples (5.25% NaOCl + ICG) (1.21±0.71 MPa) displayed the lowest outcome of bond integrity.

CONCLUSION

Terminalia chebula when used as a final canal disinfectant seems to be promising in improving canal sterility and the bond strength of GFP to the root dentin.

Clinical applications of antimicrobial photodynamic therapy in dentistry

Given the emergence of resistant bacterial strains and novel microorganisms that globally threaten human life, moving toward new treatment modalities for microbial infections has become a priority more than ever. Antimicrobial photodynamic therapy (aPDT) has been introduced as a promising and non-invasive local and adjuvant treatment in several oral infectious diseases. Its efficacy for elimination of bacterial, fungal, and viral infections and key pathogens such as Streptococcus mutans, Porphyromonas gingivalis, Candida albicans, and Enterococcus faecalis have been investigated by many invitro and clinical studies. Researchers have also investigated methods of increasing the efficacy of such treatment modalities by amazing developments in the production of natural, nano based, and targeted photosensitizers. As clinical studies have an important role in paving the way towards evidence-based applications in oral infection treatment by this method, the current review aimed to provide an overall view of potential clinical applications in this field and summarize the data of available randomized controlled clinical studies conducted on the applications of aPDT in dentistry and investigate its future horizons in the dental practice. Four databases including PubMed (Medline), Web of Science, Scopus and Embase were searched up to September 2022 to retrieve related clinical studies. There are several clinical studies reporting aPDT as an effective adjunctive treatment modality capable of reducing pathogenic bacterial loads in periodontal and peri-implant, and persistent endodontic infections. Clinical evidence also reveals a therapeutic potential for aPDT in prevention and reduction of cariogenic organisms and treatment of infections with fungal or viral origins, however, the number of randomized clinical studies in these groups are much less. Altogether, various photosensitizers have been used and it is still not possible to recommend specific irradiation parameters due to heterogenicity among studies. Reaching effective clinical protocols and parameters of this treatment is difficult and requires further high quality randomized controlled trials focusing on specific PS and irradiation parameters that have shown to have clinical efficacy and are able to reduce pathogenic bacterial loads with sufficient follow-up periods.

Caries-affected dentin disinfection using Triphala, Indocyanine green, and Potassium Titanyl Phosphate laser and their effect on adhesive bond strength

AIM

To assess the impact of new cavity sterilization types using ozone water (OW), Potassium Titanyl Phosphate laser (KTPL), Triphala, and indocyanine green photosensitizer (ICGP) on adhesive bond strength.

MATERIALS AND METHODS

Fifty human permanent molars were included based on the criteria of International Caries Detection and Assessment System (ICDAS) scores 4 and 5 visual examinations, surface hardness valuation, staining by a caries detector solution, and radiographs. Caries-affected dentin (CAD) samples were randomly distributed into groups based on methods of disinfection (n = 10). Group 1: chlorhexidine, group 2: ow, group 3: KTPL, group 4: Triphala, and group 5: ICGP. Following disinfection, specimens were applied with Adper prime and bond NT and then restored with resin composite. All specimens were positioned in a jig of the universal testing machine for shear bond strength (SBS). The debonded samples were analyzed under a stereomicroscope at 40x magnification to determine the type of failure. Analysis of variance (ANOVA) and Tukey HSD tests were used keeping the level of significance p < 0.05.

RESULTS

The highest bond of adhesive resin was displayed by group 2 specimens cleaned using OW (16.71 ± 0.19 MPa). Whereas, the lowest bond integrity was observed by group 5 specimens disinfected using ICGP (11.21 ± 0.16 MPa). It was observed samples disinfected with OW (16.71 ± 0.19 MPa) in group 2 and samples in group 4 (16.09 ± 0.26 MPa) treated with Triphala displayed comparable outcomes of bond strength (p > 0.05). It was observed that group 2 (70%) and 4 (80%) treated specimens accounted mostly for cohesive failure. However, groups 1 (80%), 3 (60%), and 5 (70%) displayed an adhesive failure pattern.

CONCLUSION

OW and Triphala displayed better bond integrity of adhesive resin to CAD and therefore have the potential to be used as a cavity disinfectant in clinical settings. However, ICGP and KTPL displayed weak bonds of adhesive to CAD. More work is needed to extrapolate the findings of the present study.

Influence of contemporary ceramo-metallic crown decontamination on the surface roughness, color stability, and disinfection. An in vitro analysis

AIM

To assess the antimicrobial effects, surface roughness (Ra), and color change (ΔE) of Morinda Citrofolia, Sapindus Mukorossi, Indocyanine green photosensitizer, and 2% NaOCl on metal ceramic crown colonized with C. Albicans, S aureus, S. mutans, and E. coli.

MATERIAL AND METHODS

An aggregate of 40 (n = 10 each) Ni/Cr metal-ceramic crowns were fabricated and inoculated with the American Type Culture Collection (ATCC) of varied microbial colonies colonized by C. Albicans, S aureus, S. mutans, and E. coli. After inoculation, specimens were exposed to four different types of disinfection methods i.e. group 1: MC, group 2: SM, group 3:ICGP, and group 4 2% NaOCl respectively to evaluate antimicrobial efficacy, Ra, and color change. Later, the microbial assay was performed and expressed as CFU/ml (log 10). Ra was assessed using a surface analyzer and color change ΔE was evaluated using a spectrophotometer Statistical analysis was performed by using two-way ANOVA and Post HocTukey's test maintaining a significance level of p less than 0.05.

RESULTS

The highest antimicrobial efficacy for metallic-ceramic crown decontamination against all inspected microbial colonies was unveiled by group 1: MC, whereas the lowest disinfection efficacy was revealed by group 4 sterilized with 2% NaOCl (control). Metallic ceramic crown decontamination with MC and SM substantiated equivalent antimicrobial efficacy in plummeting CFU/mL (log10) of C.Albicans, S aureus, S.mutans, and E. coli (p>0.05). However, ICGP as a crown disinfectant validated antimicrobial efficacy significantly less compared to MC and SM (p<0.05). Ra was assessed post-disinfection with no changes observed (p>0.05) among all groups. Similarly, ΔE was significantly higher in crowns disinfected with ICGP (p<0.05) CONCLUSION: Metallic ceramic crown decontamination using herbal disinfectants Morinda Citrofolia and Sapindus Mukorossi exhibited favorable antimicrobial efficacies against microbial colonies of C. albicans, S aureus, S.mutans, and E. coli with no changes in surface roughness and color.

Efficacy of curcumin-mediated photodynamic therapy for root canal therapy procedures: A systematic review

BACKGROUND

This systematic review aimed to investigate the effectiveness of CUR-mediated PDT (Curcumin mediated PDT) as an adjunct to conventional chemo-mechanical debridement and/or standard PDT of the RC system with endodontic infections.

METHODS

The focused research question was: "Whether the application Curcumin mediated PDT as an adjunct is more effective than the traditional chemo-mechanical debridement and/or standard PDT of the RC system alone for improving antibacterial and/or mechanical features among subjects undergoing RCT?". An electronic literature search was performed in Scopus, PubMed, and Web of Science. In vitro reports utilizing Curcumin mediated PDT as an adjunct to conventional chemo-mechanical debridement considering permanent dentition assessing the antibacterial and/or mechanical effect were included.

RESULTS

Eighteen articles were included in the review, out of which 13 studies assessed the antibacterial activity, while 5 evaluated the mechanical properties. Most of the studies concluded that Curcumin mediated PDT had a significant antibacterial activity than the conventional chemo-mechanical debridement and/or standard PDT. Four of the five studies suggested that Curcumin mediated PDT had no impact on the push-out bond strength of root dentin. Furthermore, the significant heterogeneity in the data from the included studies did not permit the author to carry out a meta-analysis.

CONCLUSION

There is potential for application of Curcumin mediated PDT as an adjunct to the conventional chemo-mechanical debridement and/or standard PDT in reducing the bacterial load, however, Curcumin mediated PDT has minimal effect on enhancing the pushout bond strength of fiber posts to radicular dentin. Moreover, clinical studies are required to provide a more conclusive opinion on the efficacy of Curcumin mediated PDT for RCT procedures.

The effect of 400 nm femtosecond laser and Zn(II)chlorin e6 methyl ester (Zn(II)e6Me) photosensitizer on disinfection of radicular dentin bonded to glass fiber post

AIM

To assess and compare push-out bond strength (PBS) when canal disinfected with 5.25% NaOCl, 400 nm femtosecond laser, and natural PS activated by PDT (CP and Zn (II) Ce6 methyl ester) on bond efficacy of radicular dentin bonded to glass fiber post.

MATERIAL AND METHODS

A sum of 40 non-traumatic, cautiously extracted with closed apex human mandibular premolars were collected and decoronated up to the cement-o-enamel junction. Canals of all specimens were cleaned and shaped using a Protaper universal NiTi system via a crown-down approach, then finally dried out and obturated with gutta-percha. Post alignment space was formed with peso reamers and sanitized. Then samples were randomly allocated into four groups as per the radicular dentin designated disinfection protocols. Group 1 disinfected with curcumin photosensitizer + EDTA, group 2: 5.25% NaOCl and EDTA, group 3: Zn (II) Ce6 methyl ester and EDTA and group 4 sanitized with 400 nm fs-laser + EDTA. GFP was cemented into the radicular canal space and specimens were placed in a thermocycler. Segmentation of the root was done at three levels (coronal, middle, and apical) and positioned in a universal testing machine for PBS analysis. Failure mode analysis was performed using a stereomicroscope and statistical analysis was executed by one-way ANOVA and Tukey multiple comparison tests at a statistically significant level of p < 0.05.

RESULTS

The highest PBS was revealed by group 2 canal disinfected with 5.25% NaOCl +17% EDTA (control) at coronal (9.49 ± 1.42 MPa) and middle (7.545 ± 0.15 MPa) root levels. Whereas, the lowest PBS was displayed by group 3: Zn (II) Ce6 methyl ester +17% EDTA at coronal (6.31 ± 0.54 MPa) middle (4.85 ± 0.11 MPa) root levels respectively. Intergroup comparison presented that radicular dentin disinfected with 400 nm femtosecond laser + 17% EDTA substantiated comparable PBS result to group 2 (control) at all three root levels (p > 0.05). Likewise, root surface disinfection with Curcumin activated by PDT+17% EDTA unveiled no statistically significant result for specimens disinfected with Zn(II) Ce6 methyl ester +17% EDTA(p > 0.05). Furthermore, apical root segments in all groups showed a substantial decrease in PBS value and were comparable (p > 0.05).

CONCLUSION

The bond efficacy of glass fiber post to radicular dentin disinfected with 400 nm femtosecond laser has the potential to be used as an alternative to conventional sodium hypochlorite.

Disinfection of caries-affected dentin using potassium titanyl phosphate laser, Rose bengal and Ozonated water on shear bond strength of deciduous teeth

AIM

To assess the efficacy of disinfection of caries-effected dentin (CAD) using KTP laser and different decontamination methods using ozonated water (OW), Rose Bengal photosensitizer (RBP), chlorhexidine (CHX), and Er, YAG laser on the shear bond strength (SBS) of adhesive resin bonded to deciduous teeth.

MATERIAL AND METHODS

A total of 50 extracted and radiographically verified carious primary molars were collected and scrutinized according to ICDAS criteria. Specimens were allocated randomly into five groups (n = 10) as per the type of CAD disinfectants. KTP laser, OW, RBP, CHX (control), and Er, YAG laser. After cavity sanitization, a resin adhesive (prime and bond NT) was smeared on the dentinal exterior followed by incremental composite filling. SBS evaluation was performed by employing specimens in the universal testing machine. The debonded surface was assessed under 40x magnification in a stereomicroscope to ascertain fracture mode. Statistical analysis was done by using the ANOVA and the Post Hoc Tukey multiple comparison tests (p < 0.05).

RESULTS

The highest SBS was exhibited by group 2 i.e., when OW was employed for CAD disinfection (10.25 ± 0.24 MPa). Whereas, the lowest SBS bond value was unveiled by samples in group 3 when RBP was applied for dentin surface sanitization (7.85 ± 0.59 MPa).CAD disinfection with KTP laser (8.25 ± 0.41 MPa), CHX (8.19 ± 0.73 MPa), and RBP displayed comparable bond values (p > 0.05).

CONCLUSION

Ozonated water and Er, YAG laser could be employed as cavity disinfectants in primary teeth as they demonstrated better shear bond strength without jeopardizing the adhesive binding capacity of restorative resins bonded to caries-affected dentin.

Efficacy of Er, Cr: YSGG laser phosphoric acid gel and Riboflavin activated by Photodynamic therapy on enamel reconditioning rebonded to metallic brackets: An Invitro study

AIM

To evaluate the shear bond strength (SBS) and failure percentage of rebonded metallic brackets after employing various enamel-reconditioning methods (37% phosphoric acid, sandblasting, Er, Cr: YSGG laser, and Riboflavin (RF).

MATERIAL AND METHODS

After sample size calculation, a sum of 40 non-carious, non-traumatically extracted and sound human premolar teeth were collected and the enamel surface was prepped by etching, washing, and drying. The enamel surface was primed with a bonding agent and light cured, later brackets were bonded via composite. After bonding, bracket debonding was begun using a Weingart plier and the enamel surface was reconditioned before rebonding. Samples were divided into four (n=10) reconditioning groups at random and subjected to SB with 90-μm alumina particles group 1, Er, Cr: YSGG laser group 2, 37% PA (control) group 3, and RF group 4 respectively. After reconditioning, brackets were rebonded to the enamel surface via an adhesive system and composite. Later, samples were exposed to the universal testing machine for SBS analysis, and bond failure analysis was performed by using an adhesive remnant index (ARI). Statistical analysis was executed by one-way ANOVA and Post Hoc Tukey multiple comparison tests at a statistically significant level of p ˂ 0.05.

RESULTS

The SBS analysis showed that the highest SBS of rebounded brackets was exhibited by 37% phosphoric acid (control) and the lowest SBS by sandblasting enamel surface with 90-μm alumina particles for enamel prior rebonding. However, Er, Cr: YSGG laser and RF activated by PDT validated comparable SBS results to control (p>0.05). Contrarily, sandblasting with 90-μm alumina particles showed a statistically significant difference from other analyzed reconditioning groups (p<0.05). Deliberating failure rate analysis by ARI index, the most eminent failures predicted among groups were scored between 0 and 1 except for sandblasting which majorly resulted in a score of 2 showing cohesive type failure.

CONCLUSION

Chromium-doped erbium, yttrium-scandium-gallium-garnet (Er, Cr: YSGG) laser, and Riboflavin activated by photodynamic therapy have the potential to be used as an alternative to 37% phosphoric acid for enamel surface reconditioning before the rebonding metallic bracket.

Adjunctive use of Er, Cr: YSGG laser, Potassium titanyl Phosphate laser, and photosensitizer on extrusion bond strength of radicular dentin to bioceramic sealers

AIM

To assess the impact of adjunctive final root canal disinfection regime curcumin photosensitizer (CP) activated by Photodynamic therapy (PDT), Er, Cr: YSGG laser (ECL), and Potassium titanyl Phosphate (KTP) laser on the bond integrity of two endodontic Bioceramic (BC) sealers.

MATERIALS AND METHOD

Decoration of eighty human single-rooted teeth was performed up to a cementoenamel junction. After instrumentation, all samples were irrigated with 2.25% NaOCl solution followed by 17% EDTA. The specimens were divided arbitrarily into 8 groups (n = 10) based on the adjunctive final irrigation method used. Group 1 and 5 (Control): No adjunctive regime, cleaned using 2.25% NaOCl + 17% EDTA, group 2 and group 6: CP activated by PDT, Group 3 and Group 7 using ECL, Group 4 and Group 8: KTP laser. Following disinfection samples in groups 1, 2, 3, and 4 were obturated using Sankin apatite root canal sealer (SARS). Specimens in groups 5, 6, 7, and 8 were obturated using Pro-root endo sealer (PRES). Sectioning of samples was performed. The sectioned specimens were subjected to a compressive loading exerted via a steel plunger moving at a 0.5 mm/min crosshead speed till debonding. Means and standard deviations (SD) of EBS of BC sealer with the root canal dentin were assessed using one-way analysis of variance (ANOVA) and Post Hoc Tukey multiple comparison tests. The level of significance was measured at p = 0.05.

RESULTS

The coronal section of samples in group 5 (Na-E-PRES) exhibited the highest bond value. The lowest PBS was displayed by the middle third of specimens in group 6. Group 1 (Na-E-SARS), group 3 (Na-E-ECL-SARS), group 5 (Na-E-PRES), and group 7 (Na-E-ECL-PRES) exhibited comparable bond values (p>0.05). Whereas, group 2 (Na-E-PDT-SARS) and group 4 (Na-E-PTPL-SARS), group 6 (Na-E-PDT-PRES), and group 8 (Na-E-PTPL-PRES) were found to be comparable (p>0.05).

CONCLUSION

Adjunctive use of Er, Cr: YSGG laser displayed better extrusion bond strength with BC root canal sealer compared to CP activated by PDT and KTP laser. Bond strength is influenced by the type of irrigation.

Assessment of Caries-Affected Dentin Adhesive Interface Treated with Contemporary Conditioning Techniques

Objective: The aim of this study was to assess shear bond strength (SBS) and failure analysis of adhesion of composite resin (CR) to caries-affected dentin (CAD) pretreated with the Er,Cr:YSGG (ECY) laser, photodynamic therapy (PDT), and etch and rinse (ER) used for cavity disinfection. Materials and methods: Methods used in this study included scanning electron microscopy (SEM), SBS analysis, failure analysis, and digital microscopy. The methods were adopted to assess bond integrity, CAD interface, smear layer, and hybridization. Thirty human third molars assessed clinically and having scores of 4 and 5 based on International Caries Detection and Assessment System (ICDAS) criteria were inspected. Infected dentin was removed. Dentin that was hard and stained pink was categorized as CAD. Ten samples were used in each group for pretreatment of CAD. Ten samples of healthy dentin [sound dentin (SD)] were collected separately and taken as controls. Samples were divided into the following groups: group 1: SD+ER; group 2: CAD+ER; group 3: CAD+ECY; and group 4: CAD+PDT after the pretreatment bonding agent was applied and the restorative procedure was performed using CR. Results: CAD conditioned with PDT before bonding to CR demonstrated the lowest SBS values (11.22 ± 0.77 MPa), whereas the highest SBS values were observed in the SD surface treated with ER (18.25 ± 1.22 MPa). In CAD and SD pretreated with ER, majority of failure modes were cohesive failure and admixed failure, whereas in CAD pretreated with PDT and the ECY laser, the adhesive failure mode was pertinent. Conclusions: The use of the ECY laser and PDT on CAD for cavity disinfection does not have potential for application in clinical settings as it decreases bond integrity of CR. Moreover, the ER pretreatment method for CAD and SD remains the gold standard.

Riboflavin (Vitamin B2), Turmeric (Curcumin) Photosensitizers Mediated Photodynamic Therapy, and Er, Cr: YSGG on Microleakage of Class V Cavities Restored by Resin-Modified Glass-Ionomer Cement

Purpose: The present study aimed to assess the effect of RF and CP intervened PDT and Er, Cr: YSGG laser on microleakage in class V RMGIC restorations in permanent teeth. Materials and Methods: In-vitro eighty standardized class V cavities (4×4×2) were prepared in extracted permanent molars based on ICDAS II (International Caries Detection and Assessment System II) caries severity code 0. All samples were arbitrarily alienated into four groups: Group 1, PDT mediated riboflavin photosensitizer (RF) [concentration of 150 μg/mL]; Group 2, PDT with curcumin photosensitizer (CP) [concentration of 100 μg/mL]; Group 3, Er, Cr: YSGG laser application; Group 4, control group: rinsed and dried dentin. Cavities were restored with conventional RMGIC. The specimens were immersed in 0.5% Fuchsine solution for 24 hrs. and sectioned. Microleakage scores were assessed under a microscope. Intergroup and intragroup comparisons were made at enamel and cementum margin respectively. Data were analyzed by non-parametric Kruskal-Wallis test and Wilcoxon tests at the level of significance deemed p < 0.05. Results: Riboflavin and curcuminmediated PDT would produce a superior reduction (95% viz 90%) of microleakage as compared to Er, Cr: YSGG laser (85%), and no control groups. Cu-PDT observed the highest amount of microleakage with the least amount of microleakage in the control group. Conclusion: Riboflavin and curcumin photosensitizers mediated PDT and Er, Cr: YSGG laser has the potential to be utilized in class V cavities before RMGIC restorations at enamel margins without adversely affecting the marginal integrity.

Disinfection of caries-affected dentin using activated vitamin B2 and diode laser with total-etch technique. An assessment of adhesive bond

AIM

The present study aims to evaluate the bond integrity of composite restoration bonded to CAD after disinfection using pineapple peel extract (PPE) Diode laser (DL) and riboflavin (RF) activated by photodynamic therapy (PDT).

MATERIAL AND METHODS

Forty human permanent mandibular molars were collected, disinfected, and mounted in poly-vinyl pipes. Carious infected dentin was removed and CAD was disinfected. Samples were divided into 4 groups based on disinfection. Group 1: CAD disinfected with CHX; group 2: CAD disinfected with diode laser; CAD disinfected with PPE and CAD sterilized with riboflavin. Following disinfection, CAD surfaces were applied with the etch-and-rinse adhesive system and bonding agent and restored with a composite restoration. Samples were placed in a thermocycler to simulate oral aging and then mounted on the universal testing machine (UTM) for shear bond strength (SBS) testing. Failure mode was assessed using a steriomicroscoscope at 40X magnification. One-way analysis of variance (ANOVA) compared the mean SBS and failure type obtained to identify intergroup differences. Similarly, for multiple group comparison, the Tukey HSD test was used keeping the level of significance at 0.05 RESULTS: : CAD disinfected with chlorhexidine (CHX) established the highest bond integrity of the restoration. However, group 2 CAD disinfected with DL displayed the lowest bond values. It was also observed that dentin disinfected using CHX demonstrated comparable SBS values to CAD disinfected with PPE and CAD disinfected with RF.

CONCLUSION

RF and PPE displayed comparable outcomes of SBS of composite restoration bonded to CAD to that of CHX. DL displayed lower bond integrity than the other investigated groups. Further studies are recommended to deduce the findings of the existing study.

Disinfection of caries affected dentin using Rose Bengal, Titanium Sapphire Laser; Ammonium Hexa-fluorosilicate, and ozonated water on resin dentin bond strength

AIM

The present study intended to evaluate the shear bond strength (SBS) of resin cement bonded to caries affected dentin (CAD) after disinfection with rose Bengal (RB), Ti-Sapphire Laser, Ammonium Hexafluorosilicate (NH₄)₂[SiF₆], and ozonated water (O₃) MATERIAL AND METHODS: A total of 100 extracted human mandibular molars were acquired using caries severity code, 6 of the ICDAS criteria. To achieve homogeneity and prevent size-biased distributions, the average cavity preparation of all specimens had a depth of 2 mm and a breadth of 3 mm. Specimens were divided into five groups (n = 20) at random according to type of disinfection. Group 1: control group, Group 2: RB, Group 3: O₃, Group 4: Ti-sapphire laser, and Group 5: (NH4)2[SiF₆]. All specimens were etch and rinsed, bonding agent was applied and restored with resin cement. Estimation of SBS was performed by placing samples (10/group) in universal testing machine. Stereomicroscope under 40 × magnification was employed for failure mode analysis (FMA). Statistical analysis was executed using the ANOVA and the Tukey multiple test (p<0.05).

RESULTS

The highest SBS was demonstrated in the control group when CAD bonded to resin cement without disinfection (18.22±1.14 MPa). Likewise, the lowest SBS values were unveiled by CAD disinfection with O₃ (12.44±1.36 MPa). Similarly, CAD when disinfected with RB (16.25±1.01 MPa) and Ti-sapphire laser (16.25±1.22 MPa) bonded to resin cement exhibited comparable bond results (p>0.05).

CONCLUSION

Caries affected dentin when treated with etch and rinse technique without the use of disinfectant displayed the highest SBS. However, it was seen that utilization of various disinfectants has altered the adhesion capacity or bonding efficacy of caries-affected dentin.

Noncarious cervical lesion pretreated using antimicrobial photodynamic therapy and diode laser in reducing dentin hypersensitivity bonded to different restorative material: Valuation of bond values and invitro dye leakage

AIM

The present study aimed to appraise the effect of Diode laser (DL), riboflavin, and curcumin on the bond strength of adhesive restorative material and the effects of pretreatment on microleakage scores.

MATERIAL AND METHODS

Ninety caries-free human permanent premolars were obtained and disinfected. All specimens were mounted till CEJ. To provide standardization, a 2 × 2 mm flat non-carious cervical lesion (NCCL) dentin surface was exposed. This was followed by dentin surface roughening/cervical groove preparation with a round bur. After tooth surface preparation, ninety specimens were divided arbitrarily into three groups. Group 1: NCCL exposed to DL; group 2: NCCL pretreated with riboflavin photosensitizer (RFP) and group 3 pretreated with curcumin photosensitizer (CP). All the three groups were further divided into two subgroups A1, A2, B1, B2, C1, and C2 based on the restorative material used (n=15). Subgroup A1, B1, and C1 were restored with composite resin (CR). Subgroup A2, B2, and C2 were restored with RMGIC. Ten samples from each subgroup were evaluated for shear bond strength (SBS) testing under a universal testing machine (UTM). Five from each subgroup were evaluated for microleakage assessment. Bond strength and microleakage analysis were performed using analysis of variance (ANOVA) with a Post-hoc test (Tukey's post hoc test) at a significance level (p=0.05).

RESULTS

The group A1, DL-CR shows the highest SBS (16.41± 0.4 MPa). However, CP-RMGIC groups demonstrated the lowest bond integrity. RFP-CR and the DL-CR group displayed comparable outcomes of SBS (p>0.05). The highest microleakage was observed with CP-RMGIC. The least microleakage was displayed by DL-CR.

CONCLUSION

Noncarious cervical lesions pretreated with diode laser and riboflavin photosensitizer showed better shear bond strength and reduced microleakage when bonded to composite resin than non-carious cervical lesions pretreated with curcumin.

Resin Modified Glass Ionomer bonded to Caries affected dentin disinfected with Carbon dioxide laser, Diode lasers, Bee glue and Photosensitizing agents: An estimation of bond strength

AIM

The present in vitro study was carried out to evaluate the effect of different cavity disinfectants chlorhexidine (CHX), riboflavin (RF), diode laser (DL), carbon dioxide laser (CO₂), and Propolis on the bond values of resin-modified glass ionomer cement (RMGIC) restoration bonded to caries affected dentin (CAD) MATERIALS AND METHODS: : Forty multi-rooted mandibular molars were adapted in self-cure acrylic resin blocks up to the level of the cementoenamel junction so that only the crown portion of the tooth remained visible. Silicon carbide discs of 1200 and 600 grits were then used to remove infected dentin. However, CAD was left behind to use as a substrate for restoration. All samples were randomly divided into five groups based on the method of disinfection. group 1: Propolis, group 2: CHX, group 3:RF activated by PDT, group 4: CO₂ laser, and group 5: DL. RMGIC restoration was then placed on these disinfected samples. Samples were kept in an incubator keeping humidity at 100 % and temperature at 37 °C for about 24 hrs. All samples were then placed in a Universal testing machine to measure SBS. Failure modes were identified using a stereomicroscope. ANOVA test was used to analyze intergroup comparison. Tukey HSD test was used to evaluate multiple group comparisons. The level of significance was set at a p < 0.05 value.

RESULTS

Group 2 specimens disinfected with CHX established the highest SBS value (17.85±1.09 MPa). Whereas, Group 5 specimens in which CAD was disinfected with DL demonstrated the lowest SBS (10.36±0.33MPa).

CONCLUSION

CO₂ has the potential to be used alternate to CHX for caries-affected dentin disinfection. However, Riboflavin activated by photodynamic therapy; Diode laser, and Propolis as cavity disinfectant prior bond to resin-modified glass ionomer is not recommended and needs further probing.

Influence of methylene blue, Riboflavin, and indocyanine green on the bond strength of caries affected dentin when bonded to resin-modified glass ionomer cement

AIM

The present study aimed to assess the influence of methylene blue (MBP), Riboflavin, and indocyanine green (ICG) on the bond strength of caries affected dentin (CAD) when bonded to resin-modified glass ionomer cement (RMGIC).

MATERIALS AND METHODS

Human third molars with caries lesions were isolated and collected scrutinized based on ICDAS criteria. The teeth were cleaned using a periodontal scaler and disinfected. All samples were positioned in polyvinyl up to the cementoenamel junction. The samples were randomly distributed into five groups based on the pretreatment regime. Samples in group 1, were pretreated with MBP; group 2, polyacrylic acid (PAA) group 3, ICG, group 4, Riboflavin photosensitizer, and group 5, 37% phosphoric acid (PA). All samples were bonded with RMGIC. 10 samples were subjected to the universal testing machine for shear bond strength (SBS) testing. Five samples from each group were placed in fuchsine dye for the microleakage assessment. Comparison of means and standard deviations (SD) of SBS and microleakage in investigated groups was performed using analysis of variance (ANOVA) and Tukey's post hoc test at a significance level (p=0.05) RESULTS: : The highest micro shear bond values were observed in group 2 (CAD conditioned with PAA) (14.26±1.67 MPa). Whereas, the lowest bond values were found in group 1 (treated with MBP) (8.82±1.08 MPa). CAD conditioned with different photosensitizers i.e., MBP, ICG, and Riboflavin before bonding to RMGIC displayed comparable bond values (8.82±1.08 MPa), (9.47±0.21 MPa), and (11.23±0.47 MPa) respectively (p>0.05). Samples conditioned with 37% PA showed significantly higher microleakage scores compared to other surface-treated groups (p<0.05).

CONCLUSION

Caries-affected dentin conditioned with polyacrylic acid demonstrated low microleakage and high bond strength.

Peri-implant parameters and cytokine profile among Peri-implant disease patients treated with Er Cr YSGG laser and PDT

AIM

To assess the effect of Er,Cr:YSGG (ECL) laser-assisted non-surgical treatment and Photodynamic therapy (PDT) as an adjunct to mechanical debridement (MD) on clinical and radiographic peri‑implant inflammatory parameters in patients with peri‑implant disease MATERIAL AND METHODS: A total of 95 patients with the peri‑implant disease were divided into 3 groups. Patients in group 1 were treated with MD only, patients in group 2 recieved MD+ECL and patients in group 3 were treated with MD+PDT. Perimplant parameters CBL: Crestal bone loss; PD: Probing depth; BI: Bleeding index; PI: Plaque index were measured from baseline to 3 month and 6 months follow up. The means and standard deviation (SD) of the aforementioned parameters were calculated using multiple comparison tests Post hoc Tukey test. Power analysis and sample size (PASS) was used for calculating sample size. The power was estimated at 85% along with a minimum of 30 participants in each group with a two-sided significance level of 0.05 was to be achieved RESULTS: At baseline mean scores of peri‑implant PI, BI and PD were comparable among patients in group 1 (control), 2 (ECL), and 3 (PDT). At 3 months follow up, mean scores of peri‑implant PI (P <0.05), BI (P <0.05) and PD (P <0.05) in group 1 (control) were significantly higher compared to group 2 (ECL) and 3 (PDT). At 6 months follow-up, PI and BI mean scores among groups 1, 2, and 3 were comparable (P>0.05). However, PD was significantly higher in control than groups 2 and 3 (P<0.05) CONCLUSION: MD with adjunct ECL and adjunct PDT are more efficient in reducing peri‑implant soft tissue inflammatory parameters for short-term use than MD alone.

Shear bond characteristics and surface roughness of poly-ether-ether ketone treated with contemporary surface treatment regimes bonded to composite resin

AIM

To evaluate and compare the influence of contemporary surface treatments of air abrasions, sulfuric acid, and Photodynamic therapy (PDT) on the adhesive bonding and surface roughness of Poly-ether-ether-ketone (PEEK) bonded to resin composite.

MATERIAL AND METHODS

One hundred and fifty PEEK (disc-shaped) specimens of 10 mm diameter and 2mm thickness were prepared. Specimens were subjected to the following surface treatments, Control (no treatment), PDT, air abrasion using Alumina particles (110 μm) (AA-AP), Sulfuric acid (SA), and air abrasion using diamond particles (10-20 μm) AA-DP. Surface roughness (Ra) of treated samples were evaluated using surface profilometer. Universal testing machine was used to evaluate shear bond strength after composite resin build-up. Stereomicroscope was utilized for failure analysis of de-bonded samples of all five groups. Statistical analysis was performed utilizing one-way analysis of variance (ANOVA) to measure means and standard deviations of SBS among studied groups and the means of SBS were paralleled by Tukey multiple comparison tests (p>0.05).

RESULTS

The highest SBS was observed by 98% SA (19.25 ± 0.68 MPa). While specimen treated with PDT (11.69 ± 0.12 MPa) showed the lowest SBS. PEEK surface, treated with PDT and AA-DP demonstrated comparable SBS (p>0.05). PEEK when pretreated with 98% SA (2.658 ± 0.658μm) exhibited a significantly higher Ra value as compared to other surface-treated groups (p< 0.05).

CONCLUSION

PEEK surface treated with SA showed the highest SBS and surface roughness compared to other groups. Surface roughness of PEEK treated with PDT, AA-AP, and AA-DP demonstrated no difference in Ra. PEEK surface treatment technique should be further investigated to develop reliable adhesive resin bonding.

Caries effected dentin disinfection using Ozone, methylthioninium chloride and turmeric activated by photodynamic therapy on bond integrity of resin-modified glass ionomer cement

AIM

To evaluate the shear bond strength (SBS) of caries effected dentin (CAD) bonded to resin-modified glass ionomer cement (RMGIC) after being disinfected with different methods their effect on microleakage scores.

MATERIAL AND METHODS

Based on criteria of ICDAS seventy-five teeth were selected and disinfected. All samples were grounded and a cavity prepared followed by random allocation of samples into different disinfection groups i.e., methylene blue photosensitizer (MBP), Silver diamine fluoride (SDF), Ozone (O₃); curcumin photosensitizer (CP) and chlorhexidine (CHX) (n = 15). All samples were restored with resin modified glass ionomer (RMGIC) incrementally. Ten specimens from each group were placed in universal testing machine (UTM) to calculate bond failure and failure type. Five samples from each group were evaluated for microleakage scores. SBS and microleakage scores was examined using analysis of variance (ANOVA) with a Post-hoc test. For all tests p-value, less than 0.5 was considered statistically significant.

RESULTS

The highest SBS was observed in CAD disinfected with CP bonded to RMGIC (16.42 ± 1.10 MPa). Similarly, the lowest bond values were demonstrated by CAD disinfected with MBP (9.21 ± 0.22 MPa) bonded to RMGIC respectively. CAD disinfected with CHX (Control) bonded to RMGIC demonstrated the lowest microleakage scores and showed a significant difference compared to other experimental groups (p< 0.05).

CONCLUSION

Curcumin along with O₃ has the potential to be used as a disinfectant in CAD as it improves SBS to RMGIC. CHX demonstrates low microleakage scores with decrease of bond integrity.

Influence of synthetic and natural photosensitizers activated by photodynamic therapy on extrusion bond strength of fiber post to radicular dentin

OBJECTIVE

To assess the effect of different photosensitizers activated by low-level laser therapy on EBS of glass fiber post to radicular dentin.

METHODS

This study was conducted at King Saud University from January 2021 to March 202. Fifty maxillary central incisors were sanitized and decoronated. NiTi was used for mechanical instrumentation of the canal. All canals were shaped, cleaned and obturated with gutta-percha. Post space was made using peso reamers. Four Division of groups were made according to photosensitizers used (n=10). Group-1: MBP at 100mg/l, Group-2: Phycocyanin at 100mg/l, Group-3: CP at 500mg/l, and Group-4 toluidine blue photosensitizer (TB). Lasers were used for activation of photosensitizers. In Group-5 samples were irrigated using sodium hypochlorite NaOCl +17% EDTA. Posts were cemented and teeth sectioned into apical, coronal and middle. For EBS all samples were subjected to a universal testing machine. Fracture patterns were analyzed using stereomicroscope. To compare EBS at different segments One-way analysis of variance (ANOVA) and Tukey multiple comparison tests (p=0.05) was performed.

RESULTS

The maximum value of EBS was shown in Group-2 radicular canal treated with CP with 17% EDTA at all three levels cervical (8.61±1.32 MPa), middle (6.81±0.73 MPa), and apical (5.51±0.25 MPa). Similarly, the minimum value of EBS was displayed in Group-5 canal irrigated with 2.25% NaOCl +17% EDTA (control) coronal (6.10±1.77 MPa), middle (5.11±0.75MPa), and apical (3.60±0.94 MPa). Intragroup assessment disclosed a decrease in EBS from cervical one-third to apical one-third in all groups.

CONCLUSION

P, CP, and TB along with EDTA have the potential to be used as canal disinfectant and favors the bonding of GFP to radicular dentin using self-etch adhesive resin.

Effect of Curcumin Suspension and Vitamin C on Dentin Shear Bond Strength and Durability. A Pilot Study

Background:

Preserving the strength and durability of dentin bonds is a concern of dental researchers and practitioners.

Objective:

The aim of this study was to investigate the effect of treating etched dentin with vitamin C and curcumin suspension as cross-linking agents on the shear bond strength and durability of a universal dental adhesive.

Methods:

Extracted human third molar teeth were collected. Fifty-six flat coronal dentin surfaces were divided equally into four groups: (1) treated with adhesives; (2) etched with 37% H3PO4 for 10s before application of adhesives; (3) same as group (2), but with dentin treated with 2.5% curcumin suspension for 60s before the application of adhesive; and (4) same as group (3), but with the use of a 20% vitamin C suspension instead of a curcumin suspension. Filtek Z350XT composite was built for all samples. Half of the samples in each group were subjected to thermocycling. Shear bond strength was measured using a universal testing machine. Scanning electron microscopy was used to investigate the dentinal surfaces after treatment.

Results:

Treatment with curcumin suspension preserved immediate and long-term bond strength. Conversely, treatment of etched dentin with vitamin C solution significantly reduced the immediate bond strength, but a significant improvement was observed after aging. SEM showed that both cross-linking agents resulted in narrowing or closing of the dentinal tubules, with an adhesive mode of failure.

Conclusion:

The application of curcumin or vitamin C suspension to acid-etched dentin resulted in different effects on immediate and long-term shear bond strength when using universal adhesives.

Bond assessment of enamel conditioned with Er, Cr: YSGG laser and methylene blue photosensitizer activated by photodynamic therapy to orthodontic metallic brackets

AIM

To assess bond integrity and failure mode after enamel pretreated with conventional and contemporary conditioning methods were bonded to metallic brackets (MB).

MATERIAL AND METHODS

Forty maxillary central incisors were selected and disinfected. All specimens were mounted up to the cement-o-enamel junction and divided into four experimental groups randomly based on the enamel conditioning technique. Photodynamic therapy (PDT) was used to condition enamel in group 1, Total-etch and rinse (TER) was used to treat samples in group 2, Specimens in group 3 were conditioned with ECL, and samples in group 4 surface pretreated with SEP. Bonding of MB was performed on the surfaces of all the specimens with a Transbond XT. Specimens from all investigated groups were positioned on a universal testing machine maintaining buccal surfaces similar to the direction of the force. After bracket debonding bond failure was assessed using ARI. The bond integrity of all four groups was compared using analysis of variance (ANOVA). Post hoc Tukey test was used for pairwise comparison among different groups.

RESULTS

Group 2, TER+MB (15.38±0.14 MPa) displayed the highest bond value whereas the lowest values of SBS were exhibited by group 1, PDT+MB (10.11±0.17 MPa). The inter-group comparison revealed that specimens of group 2 and group 3, ECL+MB (14.61±0.55 MPa) demonstrated comparable bond strength (p>0.05).

CONCLUSION

Enamel conditioned with TER and ECL demonstrated comparable SBS. However, bond integrity after PDT and SEP (self-etch primer) surface treatment of enamel bonded with MB significantly lowered bond values.

Nanoparticle incorporated dentin bonding agent to caries effected dentin treated by photodynamic therapy, laser or chlorhexidine

PURPOSE

This study aims to evaluate the microtensile bond strength (µTBS) and failure modes of graphene nanoplatelets doped with hydroxyapatite (GNP-HA) modified self-etch dentin bonding agent (DBA) to caries effected dentin (CAD) after various conventional and laser disinfection protocols.

MATERIALS AND METHODS

Graphene nanoplatelets and HA nanoparticles were doped and incorporated in DBA. Fifty carious human molar teeth were used for the experiment. CAD specimens were divided into five groups (n=10/group) into CAD undergoing no disinfection treatment (Group-CAD), 2% chlorhexidine disinfection (Group-CHX), 6% NaOCl disinfection (Group-NaOCl), methylene blue assisted PDT (Group-MB-PDT), and Er,Cr:YSGG laser application (Group-Er,Cr:YSGG). Following the respective disinfection techniques, the GNP-HA modified adhesive was applied to all treated CAD surface. Subsequently µTBS and failure modes were analyzed.

RESULTS

Representative scanning electron microscope images (SEM images) of the synthesized GNP-HA indicated flakes of graphene with varying size lengthwise (>500 nm) with 1-2 nm width. The doped HA showed round and spherical morphology conjugated over the surface of the GNP measuring 40 -100 nm in diameter. CAD group that underwent no treatment represented the highest µTBS (29.43 MPa). Within the tested specimens, MB-PDT (22.37 MPa) and Er,Cr:YSGG (21.85 MPa) showed the highest µTBS values than CHX (15.69 MPa) and NaOCl (11.46 MPa). However, there was no significant difference between MB-PDT and Er,Cr:YSGG (p>0.05) and a significant difference existed between CHX and NaOCl (p<0.05). Equal distribution of cohesive and adhesive failures was noted for CAD, CHX and NaOCl treated specimens. A majority of adhesive failures existed in the MB-PDT groups. While admixed and adhesive failures were higher in Er,Cr:YSGG treated samples.

CONCLUSIONS

The outcome of this study suggests that CAD restored by GNP-HA modified self-etch adhesive showed highest bond strength after MB-PDT and Er,Cr:YSGG protocols with low amount of adhesive failure.

Rheological Properties, Surface Microhardness, and Dentin Shear Bond Strength of Resin-Modified Glass Ionomer Cements Containing Methacrylate-Functionalized Polyacids and Spherical Pre-Reacted Glass Fillers

The aim of this study was to prepare experimental resin-modified glass ionomer cements (RMGICs) containing low levels of hydroxyethyl methacrylate (HEMA) for pulp protection. Liquid and powder phases of the experimental RMGICs were polyacid functionalized with methacrylate groups and spherical pre-reacted glass fillers (SPG). Two types of liquid phase containing 0 wt. % HEMA (CM liquid) or 5 wt. % HEMA (CMH liquid) were formulated. The experimental RMGICs were prepared by mixing SPG fillers with CM liquid (F1) or CMH liquid (F2). Rheological properties were examined using a strain-controlled rheometer (n = 5). The Vickers microhardness (n = 5) and dentin shear bond strength (SBS) (n = 10) of the materials were tested. Commercial pulp protection materials (Vitrebond and TheraCal LC) were used as comparisons. The viscosity and surface microhardness of F1 (22 m Pa·s, 18 VHN) and F2 (18 m Pa·s, 16 VHN) were significantly higher than those of Vitrebond (6 mPa·s, 6 VHN) and TheraCal (0.1 mPa·s, 7 VHN). The SBS of F1 (10.7 MPa) and F2 (11.9 MPa) was comparable to that of Vitrebond (15.4 MPa) but higher than that of TheraCal LC (5.6 MPa). The addition of 5 wt. % HEMA showed no significant effect on viscosity, surface microhardness, or SBS of the experimental RMGICs. The experimental materials showed higher viscosity and microhardness but similar SBS when compared with the commercial RMGIC.

Effect of Photodynamic therapy and Er,Cr: YSGG laser on bond strength of bleached enamel to composite resin

OBJECTIVE

The purpose of the present study was bleached enamel reversal using conventional ascorbic acid (AA) and contemporary methods including Photodynamic therapy (PDT), Er, Cr: YSGG (ECL) on bond integrity to composite resin.

MATERIAL AND METHOD

Forty sound permanent mandibular premolars were collected from a dental clinical setting and disinfected. All forty samples were mounted vertically in a rubber mold exposing only the clinical crown. All samples were bleached using Opalescence Boost Professional Teeth Whitening. After the bleaching procedure, each sample was randomly allocated into four groups according to surface treatment. Samples in group 1 were treated with methylene blue photosensitizer (MBP). Samples in group 2 were exposed to 10% sodium ascorbate. Samples in group 3 were treated with Er, Cr: YSGG laser (ECL). Samples in group 4 were not treated (control). All Samples were treated with 37% phosphoric acid and a bonding agent was applied. A bulk-fill composite was cured to all specimens and all samples were treated in a thermocycler. Specimens were placed in a universal testing machine for shear bond strength (SBS) testing. Descriptive statistics were associated by analysis of variance (ANOVA) and Tukey's post hoc test maintaining level of significance (p<0.05) RESULTS: The lowest SBS scores were achieved in the bleached enamel (BE) group (15.25±1.745 MPa). Whereas, the highest bond integrity was attained by AA group (32.23±1.854 MPa). Samples treated with ECL (31.87±1.659 MPa) and AA (32.23±1.854) were comparable (p>0.05). Samples treated with PDT exhibited significantly different SBS (22.41±1.258) compared to other experimental groups CONCLUSION: ECL showed a reversal effect of BE compared to AA and has the potential to be used in clinical settings. BE reversal using MBP needs further investigation.

Push out bond strength of glass fiber post to radicular dentin irrigated with Nisin and MTAD compared to methylene blue photodynamic therapy

AIM

Present lab-based study intended to appraise the effect of nisin, Mixture of Tetracycline, Acid and Detergent (MTAD), and photodynamic therapy (PDT) when used as a canal disinfectant on push-out bond strength (PBS) of fiber post to radicular dentin MATERIALS AND METHODS: Forty uni-radicular premolar teeth were extracted and disinfected in 0.5 % thymol solution. All specimens were decoronated to achieve standardize root length of 14 mm. Cleaning and shaping of the canal were done using protaper NiTi system. The canal space was dried and obturated. Post space was prepared using peso reamers up to 10 mm length and samples were randomly divided into 4 groups (n = 10). Group 1 irrigated with 10 % Nisin with MTAD, group 2: 1.3 % NaOCl and MTAD, Group 3 irrigated with 2.5 % NaOCl and 17 % EDTA and post space of samples in group 4 with PDT with MTAD. Fiber-reinforced composite post (FRCP) was fitted in canal space using self-etch resin cement. Each sample was cut into 1 mm from coronal, middle, and apical and subjected to PBS via a universal testing machine. For comparison of means, Analysis of variance (ANOVA) and Tukey multiple comparison test was used maintaining the level of significance at p < 0.05.

RESULT

Samples in group 3 post space irrigated with 2.5 % NaOCl and 17 % EDTA demonstrated the highest PBS at all root levels (cervical: 8.83 ± 0.14 MPa, middle: 7.63 ± 0.82 MPa and apical: 5.82 ± 0.32 MPa) in comparison to other tested groups. Whereas, group 1 in which Nisin 10 % with MTAD was used as a canal disinfectant displayed the lowest PBS at all levels (cervical: 6.91 ± 0.54 MPa, middle: 6.15 ± 0.31 MPa, and apical: 3.62 ± 0.68 MPa).

CONCLUSION

Post space irrigated with 1.3 % NaOCl and MTAD shows PBS similar to control group 2.5 % NaOCl and 17 % EDTA. Both types of irrigation methods have potential and can be recommended in clinical scenarios. Whereas, 10 % Nisin and PDT with MTAD as chelator needs further inquiry.

Antimicrobial effects of photodynamic therapy with Fotoenticine on Streptococcus mutans isolated from dental caries

Photodynamic therapy (PDT) is a promising strategy to control cariogenic pathogens, such as Streptococcus mutans. Seeking to reach the total bacterial elimination from dental surfaces, novel photosensitizers have been investigated, such as Fotoenticine (FTC) derived from chlorin e6. The objective of this study was to investigate the photodynamic effects of FTC against several clinical strains of S. mutans. Clinical isolates were obtained from patients with active carious lesions, identified by molecular analysis and subjected to PDT using laser irradiation (660 nm and 39.5 J/cm²) in planktonic and biofilm stages. We identified 11 S. mutans strains from cervical, occlusal and proximal caries. PDT mediated by FTC has totally eliminated the S. mutans cells in planktonic growth for all analyzed strains. In biofilms, PDT with FTC reached statistically significant reductions compared with the non-treated control group, at 5.4, 5.5 and 6.5 Log₁₀ (CFU/mL), respectively, for the strains from proximal, occlusal and cervical caries. The scanning electron microscopy evaluations confirmed that PDT mediated by FTC was able to disaggregate and kill the S. mutans cells adhered to enamel surface, suggesting its potential to disinfect the dental tissues.