Nitrogen-doped carbon dots/curcumin nanocomposite for combined Photodynamic/photothermal dual-mode antibacterial therapy

Green synthesis of Zn2+ nanocarriers from Auricularia auricula fermentation broth with excellent antioxidant activity

Nanoparticles (NPs) possessing nanoscale dimensions and remarkable antioxidant activity were synthesized via a green hydrothermal method utilizing Auricularia auricula fermentation broth, referred to as AFNPs. The functional groups on the surface of the AFNPs significantly contributed to the formation of AFNPs-Zn2+. The AFNPs-Zn2+ appeared a zinc retention rate of 40.80 % after gastrointestinal digestion. When compared to typical zinc supplements, AFNPs-Zn2+ did not exhibit visible cytotoxicity or hemolysis. Furthermore, AFNPs-Zn2+ demonstrated the ability to mitigate cell damage resulting from zinc deficiency. In vivo experiments showed that AFNPs-Zn2+ were mainly observed in the stomach, intestine, kidney, and testis after oral administration. In vivo distribution experiments indicated predominant presence of AFNPs-Zn2+ in the stomach, intestine, kidney, and testis following oral administration. This study highlights the potential for Auricularia auricula NPs to serve as the efficient, stable, and safe nanocarriers for Zn2+.

Caffeic acid-grafted chitosan/sodium alginate/nanoclay-based multifunctional 3D-printed hybrid scaffolds for local drug release therapy after breast cancer surgery

Breast cancer is one of the most common malignant tumors in women all over the world. Mastectomy is the most effective treatment, but there are serious problems such as high tumor recurrence rate and side effects of chemotherapy. Therefore, there is an urgent need for a therapeutic strategy that can effectively promote postoperative wound healing and inhibit local tumor recurrence. In this study, a 3D printing scaffold based on carbon dots-curcumin nano-drug release (CCNPs) was developed as a local drug delivery platform (named CCNACA using CCNPs, Sodium alginate, Nanoclay and Caffeic Acid grafted Chitosan as raw materials), which has the ability to visualize drug release. The 14-day drug release test in vitro showed that the tumor inhibition rate of CCNACA scaffolds on breast cancer cells (MCF-7) was 73.77 ± 1.68 %. And the CCNACA scaffolds had good long-term antibacterial (Escherichia coli and Staphylococcus aureus) activity. Animal experiments have shown that implanting CCNACA scaffolds into surgical defects can inhibit postoperative residual cancer cells, reduce inflammation, promote angiogenesis, and repair tissue defects caused by surgery. In summary, the local drug delivery system of this manuscript has great potential in wound healing and prevention of tumor recurrence after breast cancer surgery.

Simultaneous Dual-Wavelength Laser Irradiation against Implant-Adherent Biofilms of Staphylococcus aureus, Escherichia coli, and Candida albicans for Improved Antimicrobial Photodynamic Therapy

The efficiency of antimicrobial photodynamic therapy (PDT) might be improved by using multiple wavelengths. This study investigates the sensitivity of implant-adherent biofilms of Staphylococcus aureus, Escherichia coli, and Candida albicans to indocyanine green (ICG)-808 nm diode laser, toluidine blue O (TBO)-635 nm diode laser, and hydrogen peroxide (HP)-980 nm diode laser and their combination when irradiated with dual-wavelength laser irradiation (simultaneously 980-635 nm or 980-808 nm). After an incubation period of 72 h, the infected implants were randomly divided into seven different treatment modalities: Control, HP, HP-PDT, TBO-PDT, HP-TBO-PDT, ICG-PDT, and HP-ICG-PDT. After the treatments, the colony-forming units (CFUs)/mL and reactive oxygen species (ROS) generation were determined. All evaluated disinfection methods were significantly effective against the three investigated bacteria compared to the control. The combined treatment of HP-ICG-PDT or HP-TBO-PDT had the greatest antibacterial effect compared to each treatment alone. There were statistical differences between HP-ICG-PDT and ICG-PDT or HP-TBO-PDT and TBO-PDT for all three bacteria studied. PDT with simultaneous dual-wavelength laser irradiation is an efficient strategy to improve the therapeutic effect of PDT.

Synthesis, properties and mechanism of carbon dots-based nano-antibacterial materials

Antibiotics play an important role in the treatment of diseases, but bacterial resistance caused by their widespread and unreasonable use has become an urgent problem in clinical treatment. With the rapid advancement of nanoscience and nanotechnology, the development of nanomedicine has been transformed into a new approach to the problem of bacterial resistance. As a new type of carbon-based nanomaterial, carbon dots (CDs) have attracted the interest of antibacterial researchers due to their ease of preparation, amphiphilicity, facile surface functionalization, and excellent optical properties, among other properties. This article reviewed the synthesis methods and properties of various CDs and their composites in order to highlight the advancements in the field of CDs-based antibacterial agents. Then we focused on the relationship between the principal properties of CDs and the antibacterial mechanism, including the following: (1) the physical damage caused by the small size, amphiphilicity, and surface charge of CDs. (2) Photogenerated electron transfer characteristics of CDs that produce reactive oxygen species (ROS) in themselves or in other compounds. The ability of ROS to oxidize can lead to the lipid peroxidation of cell membranes, as well as damage proteins and DNA. (3) The nano-enzyme properties of CDs can catalyze reactions that generate ROS. (4) Synergistic antibacterial effect of CDs and antibiotics or other nanocomposites. Finally, we look forward to the challenges that CDs-based nanocomposites face in practical antibacterial applications and propose corresponding solutions to further expand the application potential of nanomaterials in the treatment of infectious diseases, particularly drug-resistant bacterial infections.

Methylene Blue-Doped Carbonized Polymer Dots: A Potent Photooxygenation Scavenger Targeting Alzheimer's β-Amyloid

The abnormal aggregation of β-amyloid protein (Aβ) is one of the main pathological hallmarks of Alzheimer's disease (AD), and thus development of potent scavengers targeting Aβ is considered an effective strategy for AD treatment. Herein, photosensitizer-doped carbonized polymer dots (PS-CPDs) were synthesized by a one-step hydrothermal method using photosensitizer (PS) and o-phenylenediamine (oPD) as precursors, and furtherly applied to inhibit Aβ aggregation via photooxygenation. The inhibition efficiency of such PS-CPDs can be adjusted by varying the type of photosensitizer, and among them, methylene blue-doped carbonized polymer dots (MB-CPDs) showed the strongest photooxygenation inhibition capability. The results demonstrated that under 650 nm NIR light irradiation, MB-CPDs (2 μg/mL) produced reactive oxygen species (ROS) to efficiently inhibit Aβ fibrillization and disaggregate mature Aβ fibrils and increased the cultured cell viability from 50% to 83%. In vivo studies confirmed that MB-CPDs extended the lifespan of AD nematodes by 4 days. Notably, the inhibitory capability of MB-CPDs is much stronger than that of MB and previously reported carbonized polymer dots. This work indicated that potent photooxygenation carbon dots can be obtained by using a photosensitizer as one of the precursors, and the results have provided new insights into the design of potent photooxygenation carbon nanomaterials targeting Aβ in AD treatment.

Label free dual-mode sensing platform for trace level monitoring of ciprofloxacin using bio-derived carbon dots and evaluation of its antioxidant and antimicrobial potential

Being a persuasive antibiotic, ciprofloxacin is widely administered to patients and its excessive discharge has generated a keen interest among researchers for its detection in water resources. Therefore, the current work utilizes the virtues of carbon dots synthesized from the leaves of Ocimum sanctum as an economical and convenient bimodal stratagem for the detection of ciprofloxacin via an electrochemical and fluorometric approach. The insight into photostability, size, morphology, and optical studies of the carbon dots was tested to enhance their scope in sensing. The excellent photoluminescence-based excitation-dependent behavior with a quantum yield of 46.7% and non-requirement of any kind of labeled surface variations for amending their fluorescence and electrochemical properties have further supported the utilization of as-prepared carbon dots in trace-level monitoring of ciprofloxacin. The fluorescence emission intensity and peak current were enhanced by many folds via the application of Ocimum sanctum-derived carbon dots. The synergetic effect of carbon dots has possessed a linear relationship between the peak current/emission intensity within the range of 0 to 250 μM of ciprofloxacin and the lowest detection limit value was found to be 0.293 and 0.0822 μM with fluorometric and electrochemical methods, respectively. The sensor demonstrated excellent applicability for the estimation of ciprofloxacin and acts as a high-performance dual sensor for further applications.

A facile approach for sulphur and nitrogen co-doped carbon nanodots to improve photothermal eradication of drug-resistant bacteria

In this study, we produced S, N co-doped CNDs (SN@CNDs) by using dimethyl sulfoxide (DMSO) and formamide (FA) as single sources of S and N, respectively. We varied the S/N ratios by adjusting the volume ratios of DMSO and FA and investigated their effect on the red-shift of the CNDs' absorption peak. Our findings demonstrate that SN@CNDs synthesized using a volume ratio of 5:6 between DMSO and FA exhibit the most significant absorption peak redshift and enhanced near-infrared absorption performance. Based on comparative analysis of the particle size, surface charge, and fluorescence spectrum of the S@CNDs, N@CNDs, and SN@CNDs, we propose a possible mechanism to explain the change of optical properties of CNDs due to S, N doping. Co-doping creates a more uniform and smaller band gap, resulting in a shift of the Fermi level and a change in energy dissipation from radioactive to non-radiative decay. Importantly, the as-prepared SN@CNDs exhibited a photothermal conversion efficiency of 51.36% at 808 nm and demonstrated exceptional photokilling effects against drug-resistant bacteria in both in vitro and in vivo experiments. Our facile method for synthesizing S and N co-doped CNDs can be extended to the preparation of other S and N co-doped nanomaterials, potentially improving their performance.

Friends against the Foe: Synergistic Photothermal and Photodynamic Therapy against Bacterial Infections

Multidrug-resistant (MDR) bacteria are rapidly emerging, coupled with the failure of current antibiotic therapy; thus, new alternatives for effectively treating infections caused by MDR bacteria are required. Hyperthermia-mediated photothermal therapy (PTT) and reactive oxygen species (ROS)-mediated photodynamic therapy (PDT) have attracted extensive attention as antibacterial therapies owing to advantages such as low invasiveness, low toxicity, and low likelihood of causing bacterial resistance. However, both strategies have notable drawbacks, including the high temperature requirements of PTT and the weak ability of PDT-derived ROS to penetrate target cells. To overcome these limitations, a combination of PTT and PDT has been used against MDR bacteria. In this review, we discuss the unique benefits and limitations of PTT and PDT against MDR bacteria. The mechanisms underlying the synergistic effects of the PTT–PDT combination are also discussed. Furthermore, we introduced advancements in antibacterial methods using nano-based PTT and PDT agents to treat infections caused by MDR bacteria. Finally, we highlight the existing challenges and future perspectives of synergistic PTT–PDT combination therapy against infections caused by MDR bacteria. We believe that this review will encourage synergistic PTT- and PDT-based antibacterial research and can be referenced for future clinical applications.

Turmeric carbon quantum dots enhanced chitosan nanocomposite films based on photodynamic inactivation technology for antibacterial food packaging

The increased demand for food quality and safety has led the food industry to pay urgent attention to new packaging materials with antimicrobial activity. In this study, we combined photodynamic inactivation of bactericidal technology in food packaging materials by incorporating fluorescent carbon quantum dots (CDs) prepared from the natural plant turmeric into a chitosan matrix to prepare a series of active composite food packaging films (CDs-CS). The chitosan film containing CDs had better mechanical properties, UV protection and hydrophobicity. Under irradiation with a 405 nm light source, the composite film was able to produce abundant reactive oxygen species, and the CDs-CS₂ film exhibited reductions of approximately 3.19 and 2.05 Log₁₀ CFU/mL for Staphylococcus aureus and Escherichia coli respectively within 40 min. In cold pork storage applications, CDs-CS₂ films showed inhibition of the growth of colonization in pork and retarded the spoilage of pork within 10 days. This work will provide new insights to explore safe and efficient antimicrobial food packaging.

Rapid and sensitifve fluorescence determination of oxytocin using nitrogen-doped carbon dots as fluorophores

In this work, a novel nitrogen (N)-doped carbon dots (N-CDs) was prepared with quercetin as the carbon source and o-phenylenediamine as the nitrogen source by hydrothermal synthesis, and their application as fluorophores for selective and sensitive determination of oxytocin were reported. The fluorescence quantum yield of the as-prepared N-CDs, which exhibited good water solubility and photostability, was about 6.45 % using rhodamine 6 G as reference substance, and the maximum excitation (E_x) and emission (E_m) wavelength were 460 nm and 542 nm, respectively. The results illustrated that the direct fluorescence quenching of N-CDs fluorophore for the detection of oxytocin achieved good linearity in the range of 0.2-5.0 IU/mL and 5.0-10.0 IU/mL, the correlation coefficients were 0.9954 and 0.9909, respectively, and the detection limit was 0.0196 IU/mL (S/N = 3). The recovery rates were 98.8∼103.8 % with RSD= 0.93 %. The interference experiments showed that common metal ions, possible impurities introduced in production and coexisting excipients in the preparation had little adverse influence on selective detection of oxytocin by the developed N-CDs based fluorescent detection method. The mechanism study on the fluorescence quenching of N-CDs by oxytocin concentrations under the given experimental conditions demonstrated that there were internal filtration effect and static quenching in the system. The developed fluorescence analysis platform for the detection of oxytocin had been proved to be rapid, sensitive, specific and accurate, and to be used for the quality inspection of oxytocin.

Therapeutic contact lenses for the treatment of corneal and ocular surface diseases: advances in extended and targeted drug delivery

The eye is one of the most important organs in the human body providing critical information on the environment. Many corneal diseases can lead to vision loss affecting the lives of people around the world. Ophthalmic drug delivery has always been a major challenge in the medical sciences. Since traditional methods are less efficient (∼ 5%) at delivering drugs to ocular tissues, contact lenses have generated growing interest in ocular drug delivery due to their potential to enhance drug bioavailability in ocular tissues. The main techniques used to achieve sustained release are discussed in this review, including soaking in drug solutions, incorporating drug into multilayered contact lenses, use of vitamin E barriers, molecular imprinting, nanoparticles, micelles and liposomes. The most clinically relevant results on different eye pathologies are presented. In addition, this review summarizes the benefits of contact lenses over eye drops, strategies for incorporating drugs into lenses to achieve sustained release, results of in vitro and in vivo studies, and the recent advances in the commercialization of therapeutic contact lenses for allergic conjunctivitis.

Carbon dots for photothermal applications

Carbon dots are zero-dimensional nanomaterials that have garnered significant research interest due to their distinct optical properties, biocompatibility, low fabrication cost, and eco-friendliness. Recently, their light-to-heat conversion ability has led to several novel photothermal applications. In this minireview, we categorize and describe the photothermal application of carbon dots along with methods incorporated to enhance their photothermal efficiency. We also discuss the possible mechanisms by which the photothermal effect is realized in these carbon-based nanoparticles. Taken together, we hope to provide a comprehensive landscape highlighting several promising research directions for using carbon dots for photothermal applications.