Effects of ionic strength on inclusion body refolding at high concentration

Effects of Chemical Additives in Refolding Buffer on Recombinant Human BMP-2 Dimerization and the Bioactivity on SaOS-2 Osteoblasts

Bone morphogenetic protein-2 (BMP-2) is a promising osteogenic agent in tissue engineering. BMP-2 is usually expressed in Escherichia coli owing to the high yield and low cost, but the protein is expressed as inclusion bodies. Thus, the bottleneck for BMP-2 production in E. coli is the refolding process. Here, we explored the effects of the refolding buffer composition on BMP-2 refolding. The BMP-2 inclusion body was solubilized in urea and subjected to refolding by the dilution method. Various additives were investigated to improve the BMP-2 refolding yield. Nonreducing SDS-PAGE showed that BMP-2 dimers, the presumably biologically active form, were detected at approximately 25 kDa. The highest yield of the BMP-2 dimers was observed in the refolding buffer that contained ionic detergents (sarkosyl and cetylpyridinium chloride) followed by zwitterionic and nonionic detergents (NDSB-195, NP-40, and Tween 80). In addition, sugars (glucose, sorbitol, and sucrose) in combination with anionic detergents (sodium dodecyl sulfate and sarkosyl) reduced BMP-2 oligomers and increased the BMP-2 dimer yield. Subsequently, the refolded BMP-2s were tested for their bioactivity using the alkaline phosphatase assay in osteogenic cells (SaOS-2), as well as the luciferase reporter assay and the calcium assays. The refolded BMP-2 showed the activities in the calcium deposition assay and the luciferase reporter assay but not in the alkaline phosphatase activity assay or the intracellular calcium assay even though the dimers were clearly detected. Therefore, the detection of the disulfide-linked dimeric BMP-2 in nonreducing SDS-PAGE is an inadequate proxy for the bioactivity of BMP-2.

Refolding in the modern biopharmaceutical industry

Inclusion bodies (IBs) often emerge upon overexpression of recombinant proteins in E. coli. From IBs, refolding is necessary to generate the native protein that can be further purified to obtain pure and active biologicals. This work focusses on refolding as a significant process step during biopharmaceutical manufacturing with an industrial perspective. A theoretical and historical background on protein refolding gives the reader a starting point for further insights into industrial process development. Quality requirements on IBs as starting material for refolding are discussed and further economic and ecological aspects are considered with regards to buffer systems and refolding conditions. A process development roadmap shows the development of a refolding process starting from first exploratory screening rounds to scale-up and implementation in manufacturing plant. Different aspects, with a direct influence on yield, such as the selection of chemicals including pH, ionic strength, additives, etc., and other often neglected aspects, important during scale-up, such as mixing, and gas-fluid interaction, are highlighted with the use of a quality by design (QbD) approach. The benefits of simulation sciences (process simulation and computer fluid dynamics) and process analytical technology (PAT) for seamless process development are emphasized. The work concludes with an outlook on future applications of refolding and highlights open research inquiries.

An in silico analysis of Ibuprofen enantiomers in high concentrations of sodium chloride with SARS-CoV-2 main protease

2020 will be remembered worldwide for the outbreak of Coronavirus disease (COVID-19), which quickly spread until it was declared as a global pandemic. The main protease (Mpro) of SARS-CoV-2, a key enzyme in coronavirus, represents an attractive pharmacological target for inhibition of SARS-CoV-2 replication. Here, we evaluated whether the anti-inflammatory drug Ibuprofen, may act as a potential SARS-CoV-2 Mpro inhibitor, using an in silico study. From molecular dynamics (MD) simulations, we also evaluated the influence of ionic strength on the affinity and stability of the Ibuprofen-Mpro complexes. The docking analysis shows that R(-)Ibuprofen and S(+)Ibuprofen isomers can interact with multiple key residues of the main protease, through hydrophobic interactions and hydrogen bonds, with favourable binding energies (-6.2 and -5.7 kcal/mol, respectively). MM-GBSA and MM-PBSA calculations confirm the affinity of these complexes, in terms of binding energies. It also demonstrates that the ionic strength modifies significantly their binding affinities. Different structural parameters calculated from the MD simulations (120 ns) reveal that these complexes are conformational stable in the different conditions analysed. In this context, the results suggest that the condition 2 (0.25 NaCl) bind more tightly the Ibuprofen to Mpro than the others conditions. From the frustration analysis, we could characterize two important regions (Cys44-Pro52 and Linker loop) of this protein involved in the interaction with Ibuprofen. In conclusion, our findings allow us to propose that racemic mixtures of the Ibuprofen enantiomers might be a potential treatment option against SARS-CoV-2 Mpro. However, further research is necessary to determinate their possible medicinal use.Communicated by Ramaswamy H. Sarma.

Effect of SpyTag/SpyCatcher cyclization on stability and refolding of green fluorescent protein

To study the effect of SpyTag/SpyCatcher cyclization on stability and refolding of protein, we constructed a cyclized green fluorescent protein (SRGFP) and its derivative to act as a linear structure control (L-SRGFP). SRGFP and L-SRGFP showed similar fluorescence characteristics to the wild-type GFP, while compared with GFP and L-SRGFP, the thermal stability and denaturation resistance of SRGFP were improved. The refolding efficiencies of these three denatured proteins were investigated under different pH, temperature and initial protein concentration conditions, and it was found that SRGFP was superior to GFP and L-SRGFP in terms of refolding yield and refolding speed. In the pH range of 8.0-8.5, SRGFP could basically recover all fluorescence, while GFP and L-SRGFP recovered only about 87.52% and 88.58%. When refolded at a high temperature (37 °C), SRGFP still recovered 85.27% of the fluorescence, whereas GFP and L-SRGFP recovered only around 69.43% and 68.45%. At a high initial protein concentration (5 mg/mL), the refolding yield of SRGFP was about 15% higher than that of both GFP and L-SRGFP. These results suggest that the introduction of SpyRing structure (head-to-tail cyclization via SpyTag and SpyCatcher) improved the protein's stability and facilitated the refolding of denatured protein.

Optimization of culture conditions for the expression of three different insoluble proteins in Escherichia coli

Recombinant protein expression for structural and therapeutic applications requires the use of systems with high expression yields. Escherichia coli is considered the workhorse for this purpose, given its fast growth rate and feasible manipulation. However, bacterial inclusion body formation remains a challenge for further protein purification. We analyzed and optimized the expression conditions for three different proteins: an anti-MICA scFv, MICA, and p19 subunit of IL-23. We used a response surface methodology based on a three-level Box-Behnken design, which included three factors: post-induction temperature, post-induction time and IPTG concentration. Comparing this information with soluble protein data in a principal component analysis revealed that insoluble and soluble proteins have different optimal conditions for post-induction temperature, post-induction time, IPTG concentration and in amino acid sequence features. Finally, we optimized the refolding conditions of the least expressed protein, anti-MICA scFv, using a fast dilution protocol with different additives, obtaining soluble and active scFv for binding assays. These results allowed us to obtain higher yields of proteins expressed in inclusion bodies. Further studies using the system proposed in this study may lead to the identification of optimal environmental factors for a given protein sequence, favoring the acceleration of bioprocess development and structural studies.

Effect of buffer additives on solubilization and refolding of reteplase inclusion bodies

Reteplase is a non-glycosylated and recombinant form of tissue type plasminogen activator, which is produced in Escherichia coli. However, its overexpression usually leads to formation of inactive aggregates or inclusion bodies. In the present study, we report on the development of optimized processes for isolation, solubilization, and refolding of reteplase inclusion bodies to recover active protein. After protein overexpression in E. coli BL21 (DE3) inclusion bodies were isolated by cell disruption and repeated wash of pellet with buffer containing Triton X-100. To solubilize the inclusion bodies, different types, concentrations, pHs, and additives of denaturing agents were used. Rapid micro dilution method was applied for refolding of solubilized reteplase. Different chemical additives including sugars, alcohols, polymers, detergents, amino acids, kosmotropic, and chaotropic salts, reducing agents, and buffering agents were used in the refolding buffer. To evaluate the biological activity of refolded reteplase, an indirect chromogenic assay was performed. The best solubilizing agent for dissolving reteplase inclusion bodies was 6 M urea at pH 12. The optimized buffer for refolding of solubilized reteplase was found to be 1.15 M glucose, 9.16 mM imidazole, and 0.16 M sorbitol which resulted in high yield of biologically active protein. Our results indicate type, concentration, and pH of solvent and type, concentration, and combination of chemical additives can significantly influence the yield of inclusion bodies solubilization and refolding.

Strategizing for the purification of a multiple Big domain-containing protein in native conformation is worth it!

The reliability and accuracy of conformational or functional studies of any novel multidomain protein rely on the quality of protein. The bottleneck in structural studies with the complete Big_2 domain containing proteins like LigA, LigB or MpIBP is usually their large molecular size owing to their multidomain (>10-12 domains) architectures. Interestingly, a soil bacterium Paenarthrobacter aurescens TC1, harbours a gene that encodes a protein comprising of four predicted Big_2 domains. We report here the expression and purification of this novel, multiple Big_2 domains containing protein, Arig of P. aurescens TC1. During overexpression, recombinant Arig formed inclusion bodies and hence was purified by on-column refolding. The refolded Arig revealed a β-sheet conformation and a well-resolved near-UV CD spectra but did not exhibit a well-dispersed 2D [¹H-¹⁵N]-HSQC NMR spectrum, as expected for a well-folded β-sheet native conformation. We, therefore, further optimized Arig overexpression in the soluble fraction by including osmolytes. CD spectroscopic and 2D [¹H-¹⁵N]-HSQC analyses consolidate that Arig purified alternatively has a well-folded native conformation. While we describe different strategies for purification of Arig, we also present the spectral properties of this novel all-β-sheet protein.