Lysine substitutions convert a bacterial-agglutinating peptide into a bactericidal peptide that retains anti-lipopolysaccharide activity and low hemolytic activity

Antimicrobial therapy based on self-assembling peptides

The emergence of drug-resistant microorganisms has threatened global health, and microbial infections have severely limited the use of medical materials. For example, the attachment and colonization of pathogenic bacteria to medical implant materials can lead to wound infections, inflammation and complications, as well as implant failure, shortening their lifespan and even resulting in patient death. In the era of antibiotic resistance, antimicrobial drug discovery needs to prioritize unconventional therapies that act on new targets or adopt new mechanisms. In this regard, supramolecular antimicrobial peptides have emerged as attractive therapeutic platforms, both as bactericides for combination antibiotics and as delivery vehicles. By taking advantage of their programmable intermolecular and intramolecular interactions, peptides can be modified to form higher-order structures (including nanofibers and nanoparticles) with unique functionality. This paper begins with an analysis of the relationship between peptide self-assembly and antimicrobial activity, describes in detail the research and development of various self-assembled antimicrobial peptides in recent years, and finally explores different combinatorial strategies for self-assembling antimicrobial peptides.

Interpenetrating nanofibrillar membrane of self-assembled collagen and antimicrobial peptides for enhanced bone regeneration

Bone regeneration remains a major clinical challenge, especially when infection necessitates prolonged antibiotic treatment. This study presents a membrane composed of self-assembled and interpenetrating GL13K, an antimicrobial peptide (AMP) derived from a salivary protein, in a collagen membrane for antimicrobial activity and enhanced bone regeneration. Commercially available collagen membranes were immersed in GL13K solution, and self-assembly was initiated by raising the solution pH to synthesize the multifunctional membrane called COL-GL. COL-GL was composed of interpenetrating large collagen fibers and short GL13K nanofibrils, which increased hydrophobicity, reduced biodegradation from collagenase, and stiffened the matrix compared to control collagen membranes. Incorporation of GL13K led to antimicrobial and anti-fouling activity against early oral surface colonizer Streptococcus gordonii while not affecting fibroblast cytocompatibility or pre-osteoblast osteogenic differentiation. GL13K in solution also reduced macrophage inflammatory cytokine expression and increased pro-healing cytokine expression. Bone formation in a rat calvarial model was accelerated at eight weeks with COL-GL compared to the gold-standard collagen membrane based on microcomputed tomography and histology. Interpenetration of GL13K within collagen sidesteps challenges with antimicrobial coatings on bone regeneration scaffolds while increasing bone regeneration. This strength makes COL-GL a promising approach to reduce post-surgical infections and aid bone regeneration in dental and orthopedic applications. STATEMENT OF SIGNIFICANCE: The COL-GL membrane, incorporating the antimicrobial peptide GL13K within a collagen membrane, signifies a noteworthy breakthrough in bone regeneration strategies for dental and orthopedic applications. By integrating self-assembled GL13K nanofibers into the membrane, this study successfully addresses the challenges associated with antimicrobial coatings, exhibiting improved antimicrobial and anti-fouling activity while preserving compatibility with fibroblasts and pre-osteoblasts. The accelerated bone formation observed in a rat calvarial model emphasizes the potential of this innovative approach to minimize post-surgical infections and enhance bone regeneration outcomes. As a promising alternative for future therapeutic interventions, this material tackles the clinical challenges of extended antibiotic treatments and antibiotic resistance in bone regeneration scenarios.

Frankincense (Boswellia serrata) Extract Effects on Growth and Biofilm Formation of Porphyromonas gingivalis, and Its Intracellular Infection in Human Gingival Epithelial Cells

Frankincense is produced by Boswellia trees, which can be found throughout the Middle East and parts of Africa and Asia. Boswellia serrata extract has been shown to have anti-cancer, anti-inflammatory, and antimicrobial effects. Periodontitis is an oral chronic inflammatory disease that affects nearly half of the US population. We investigated the antimicrobial effects of B. serrata extract on two oral pathogens associated with periodontitis. Using the minimum inhibitory concentration and crystal violet staining methods, we demonstrated that Porphyromonas gingivalis growth and biofilm formation were impaired by treatment with B. serrata extracts. However, the effects on Fusobacterium nucleatum growth and biofilm formation were not significant. Using quantification of colony-forming units and microscopy techniques, we also showed that concentrations of B. serrata that were not toxic for host cells decreased intracellular P. gingivalis infection in human gingival epithelial cells. Our results show antimicrobial activity of a natural product extracted from Boswellia trees (B. serrata) against periodontopathogens. Thus, B. serrata has the potential for preventing and/or treating periodontal diseases. Future studies will identify the molecular components of B. serrata extracts responsible for the beneficial effects.

GL13K-modified titanium regulates osteogenic differentiation via the NF-κB pathway

The osteoimmune response plays a crucial regulatory role in the osseointegration of dental implants. Previous studies found the antimicrobial peptide coating (GL13K) could activate the immunomodulatory potential of macrophages (Raw 264.7) and promote osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). To further investigate the mechanism of interaction between immunomodulation and differentiation, a co-culture model of the representative cells (Raw 264.7 and BMSCs) was constructed to mimic the immune microenvironment. In this system, GL13K coating of titanium implant effectively inhibited the polarization of the inflammatory M1 type and promoted the polarization of the anti-inflammatory M2 type. Furthermore, the inhibited NF-κB signaling pathway and Mip-2 gene expression were found and validated by bioinformatics analysis and virus-induced gene silencing, which significantly affected the tissue repair process. It can be concluded that the GL13K coating had the potential to establish a localized immune microenvironment conducive to osteogenic differentiation through cellular interactions. Subsequent investigations would be dedicated to a thorough examination of the osseointegration effects of GL13K coating.

Sitagliptin attenuates Porphyromonas gingivalis virulence and inflammatory response in macrophage on titanium

BACKGROUND

In peri-implantitis, Porphyromonas gingivalis and macrophage play important roles. The aim of this study was to detect the attenuating effect of an anti-diabetic drug sitagliptin on Porphyromonas gingivalis virulence and inflammatory response in macrophage on titanium discs.

MATERIALS AND METHODS

Porphyromonas gingivalis and macrophage were cultured on titanium discs. Antibacterial and antibiofilm activities of sitagliptin were assessed and the morphology of Porphyromonas gingivalis was observed by SEM. Bacterial early adhesion, aggregation, hemolysis and Porphyromonas gingivalis virulence factors mRNA expression were assessed to preliminarily investigate the mechanisms of action. Flow cytometry assay, qRT-PCR assay and ELISA were used to assess the anti-inflammatory effect of sitagliptin on Porphyromonas gingivalis lipopolysaccharide-stimulated macrophage.

RESULTS

The present study demonstrated the inhibiting effect of sitagliptin on the growth, biofilm and virulence factors of Porphyromonas gingivalis and the protective effect on the Porphyromonas gingivalis lipopolysaccharide-induced polarization in macrophage. And we also confirmed the anti-inflammatory effect of sitagliptin on the secretion of inflammation-related factors in macrophage.

CONCLUSIONS

Sitagliptin possesses the attenuating effect on Porphyromonas gingivalis virulence and inflammatory response in Porphyromonas gingivalis lipopolysaccharide-stimulated macrophage on titanium.

A novel anti-lipopolysaccharide factor from blue swimmer crab Portunus pelagicus and its cytotoxic effect on the prokaryotic expression host, E. coli on heterologous expression

BACKGROUND

Invertebrates like crabs employ their own immune systems to fight against a number of invasive infections. Anti-lipopolysaccharide factors (ALFs) are an important class of antimicrobial peptides (AMPs) exhibiting binding and neutralizing activities against lipopolysaccharides.

RESULTS

This study identified and characterized a novel homolog of ALF (Pp-ALF) from the blue swimmer crab Portunus pelagicus. Pp-ALF has a 369bp open-reading frame encoding a protein with 123 amino acids. The deduced protein featured an LPS-binding domain and a signal peptide. The predicted tertiary structure of Pp-ALF contains three α helices packed against four β sheets. The deduced amino acid sequence of Pp-ALF had a net positive charge of +10.75 and an isoelectric point of 9.8. Phylogenetic analysis revealed that Pp-ALF has a strong ancestral relationship with crab ALFs.

CONCLUSION

Antibacterial, antiviral, antifungal, anticancer, and antibiofilm activities of Pp-ALF could be revealed by in silico prediction tools. Recombinant expression of Pp-ALF was unsuccessful in the Escherichia coli Rosetta-gami expression system due to the cytotoxic effect of the peptide to the host. The toxic effect of Pp-ALF to the host was displayed by membrane permeabilization and death of the host cells by fluorescent staining with Syto9-Propidium Iodide and CTC-DAPI- FITC.

Peptides in Dentistry: A Scoping Review

Currently, it remains unclear which specific peptides could be appropriate for applications in different fields of dentistry. The aim of this scoping review was to scan the contemporary scientific papers related to the types, uses and applications of peptides in dentistry at the moment. Literature database searches were performed in the following databases: PubMed/MEDLINE, Scopus, Web of Science, Embase, and Scielo. A total of 133 articles involving the use of peptides in dentistry-related applications were included. The studies involved experimental designs in animals, microorganisms, or cells; clinical trials were also identified within this review. Most of the applications of peptides included caries management, implant osseointegration, guided tissue regeneration, vital pulp therapy, antimicrobial activity, enamel remineralization, periodontal therapy, the surface modification of tooth implants, and the modification of other restorative materials such as dental adhesives and denture base resins. The in vitro and in vivo studies included in this review suggested that peptides may have beneficial effects for treating early carious lesions, promoting cell adhesion, enhancing the adhesion strength of dental implants, and in tissue engineering as healthy promotors of the periodontium and antimicrobial agents. The lack of clinical trials should be highlighted, leaving a wide space available for the investigation of peptides in dentistry.

Opposites Attract: Electrostatically Driven Loading of Antimicrobial Peptides into Phytoglycogen Nanocarriers

Antimicrobial peptides, such as GL13K, have a high binding selectivity toward bacterial membranes, while not affecting healthy mammalian cells at therapeutic concentrations. However, delivery of these peptides is challenging since they are susceptible to proteolytic hydrolysis and exhibit poor cellular uptake. A protective nanocarrier is thus proposed to overcome these obstacles. We investigate the potential to employ biodegradable phytoglycogen nanoparticles as carriers for GL13K using a simple loading protocol based on electrostatic association rather than chemical conjugation, eliminating the need for control of chemical cleavage for release of the peptide in situ. Both the native (quasi-neutral) and carboxymethylated (anionic) phytoglycogen were evaluated for their colloidal stability, loading capacity, and release characteristics. We show that the anionic nanophytoglycogen carries a greater cationic GL13K load and exhibits slower release kinetics than native nanophytoglycogen. Isotope exchange measurements demonstrate that the antimicrobial peptide is entrapped in the pores of the dendritic-like macromolecule, which should provide the necessary protection for delivery. Importantly, the nanoformulations are active against a Pseudomonas aeruginosa clinical isolate at concentrations comparable to those of the free peptide and representative, small molecule antibiotics. The colloidal nanocarrier preserves peptide stability and antimicrobial activity, even after long periods of storage (at least 8 months).

The antimicrobial peptide DGL13K is active against drug-resistant gram-negative bacteria and sub-inhibitory concentrations stimulate bacterial growth without causing resistance

Antimicrobial peptides may be alternatives to traditional antibiotics with reduced bacterial resistance. The antimicrobial peptide GL13K was derived from the salivary protein BPIFA2. This study determined the relative activity of the L-and D-enantiomers of GL13K to wild-type and drug-resistant strains of three gram-negative species and against Pseudomonas aeruginosa biofilms. DGL13K displayed in vitro activity against extended-spectrum beta-lactamase (ESBL)-producing and Klebsiella pneumoniae carbapenemase (KPC)-producing Klebsiella pneumoniae (MICs 16–32 μg/ml), MDR and XDR P. aeruginosa, and XDR Acinetobacter baumannii carrying metallo-beta-lactamases (MICs 8–32 μg/ml). P. aeruginosa showed low inherent resistance to DGL13K and the increased metabolic activity and growth caused by sub-MIC concentrations of GL13K peptides did not result in acquired bacterial resistance. Daily treatment for approximately two weeks did not increase the MIC of DGL13K or cause cross-resistance between LGL13K and DGL13K. These data suggest that DGL13K is a promising antimicrobial peptide candidate for further development.

Antimicrobial peptide GL13K immobilized onto SLA-treated titanium by silanization: antibacterial effect against methicillin-resistant Staphylococcus aureus (MRSA)

Infection is the main reason for implant failure, and the incidence of drug-resistant bacterial infection has increased in recent years. Further, methicillin-resistant Staphylococcus aureus (MRSA)-related implant infection has become a serious worldwide threat. New strategies, other than antibiotics, to tackle drug-resistance, are of high clinical significance. Antimicrobial peptides show clear superiority over conventional antibiotics in inhibiting drug-resistant bacteria. In the present study, we combined the antimicrobial peptide, GL13K, with sandblasting and acid-etching (SLA)-treated titanium using a silane coupling agent. Field emission scanning electron microscopy images showed the morphology of the coating. Attenuated total reflectance Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy results confirmed loading of GL13K, and the hydrophilicity of the SLA-GL13K coating was evaluated by water contact angle analysis. The releasing study of samples showed that the coating has a sustained releasing profile. SLA-GL13K coating exhibited strong contact- and release-killing abilities against MRSA, E. coli, and S. aureus. Meanwhile, Cell Counting Kit 8 analysis and examination of cell morphology demonstrated that the SLA-GL13K coating had good cytocompatibility at antibacterial concentrations. Overall, all these results suggest that SLA-GL13K coating can be successfully fabricated using silanization, and is a promising candidate for controlling MRSA-induced implant-related infection.

Mammals' humoral immune proteins and peptides targeting the bacterial envelope: from natural protection to therapeutic applications against multidrug‐resistant Gram ‐negatives

Mammalian innate immunity employs several humoral ‘weapons’ that target the bacterial envelope. The threats posed by the multidrug‐resistant ‘ESKAPE’ Gram‐negative pathogens (Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter spp.) are forcing researchers to explore new therapeutic options, including the use of these immune elements. Here we review bacterial envelope‐targeting (peptidoglycan and/or membrane‐targeting) proteins/peptides of the mammalian immune system that are most likely to have therapeutic applications. Firstly we discuss their general features and protective activity against ESKAPE Gram‐negatives in the host. We then gather, integrate, and discuss recent research on experimental therapeutics harnessing their bactericidal power, based on their exogenous administration and also on the discovery of bacterial and/or host targets that improve the performance of this endogenous immunity, as a novel therapeutic concept. We identify weak points and knowledge gaps in current research in this field and suggest areas for future work to obtain successful envelope‐targeting therapeutic options to tackle the challenge of antimicrobial resistance.

Interactions of two enantiomers of a designer antimicrobial peptide with structural components of the bacterial cell envelope

Antimicrobial peptides (AMPs) have great potential in treating multi-drug resistant bacterial infections. The antimicrobial activity of d-enantiomers is significantly higher than l-enantiomers and sometimes selectively enhanced against Gram-positive bacteria. Unlike phospholipids in the bacterial plasma membrane, the role of other bacterial cell envelop components is often overlooked in the mode of action of AMPs. In this work, we explored the structural interactions between the main different structural components in Gram-negative/Gram-positive bacteria and the two enantiomers of a designer AMP, GL13K. We observed that both l-GL13K and d-GL13K formed self-assembled amyloid-like nanofibrils when the peptides interacted with lipopolysaccharide and lipoteichoic acid, components of the outer membrane of Gram-negative bacteria and cell wall of Gram-positive bacteria, respectively. Another cell wall component, peptidoglycan, showed strong interactions exclusively with d-GL13K and formed distinct laminar structures. This specific interaction between peptidoglycans and d-GL13K might contribute to the enhanced activity of d-GL13K against Gram-positive bacteria as they have a much thicker peptidoglycan layer than Gram-negative bacteria. A better understanding of the specific role of bacterial cell envelop components in the AMPs mechanism of action can guide the design of more effective Gram-selective AMPs.

Antimicrobial and enzyme-responsive multi-peptide surfaces for bone-anchored devices

Functionalization of dental and orthopedic implants with multiple bioactivities is desirable to obtain surfaces with improved biological performance and reduced infection rates. While many approaches have been explored to date, nearly all functionalized surfaces are static, i.e., non-responsive to biological cues. However, tissue remodeling necessary for implant integration features an ever-changing milieu of cells that demands a responsive biomaterial surface for temporal synchronization of interactions between biomaterial and tissue. Here, we successfully synthesized a multi-functional, dynamic coating on titanium by co-immobilizing GL13K antimicrobial peptide and an MMP-9 - a matrix metalloproteinase secreted by bone-remodeling osteoclasts - responsive peptide. Our co-immobilized peptide surface showed potent anti-biofilm activity, enabled effective osteoblast and fibroblast proliferation, and demonstrated stability against a mechanical challenge. Finally, we showed peptide release was triggered for up to seven days when the multi-peptide coatings were cultured with MMP-9-secreting osteoclasts. Our MMP-9 cleavable peptide can be conjugated with osteogenic or immunomodulatory motifs for enhanced bone formation in future work. Overall, we envisage our multifunctional, dynamic surface to reduce infection rates of percutaneous bone-anchored devices via strong anti-microbial activity and enhanced tissue regeneration via temporal synchronization between biomaterial cues and tissue responses.

DNA Nanostructures in the Fight Against Infectious Diseases

Throughout history, humanity has been threatened by countless epidemic and pandemic outbreaks of infectious diseases, from the Justinianic Plague to the Spanish flu to COVID-19. While numerous antimicrobial and antiviral drugs have been developed over the last 200 years to face these threats, the globalized and highly connected world of the 21st century demands for an ever-increasing efficiency in the detection and treatment of infectious diseases. Consequently, the rapidly evolving field of nanomedicine has taken up the challenge and developed a plethora of strategies to fight infectious diseases with the help of various nanomaterials such as noble metal nanoparticles, liposomes, nanogels, and virus capsids. DNA nanotechnology represents a comparatively recent addition to the nanomedicine arsenal, which, over the past decade, has made great progress in the area of cancer diagnostics and therapy. However, the past few years have seen also an increasing number of DNA nanotechnology-related studies that particularly focus on the detection and inhibition of microbial and viral pathogens. Herein, a brief overview of this rather young research field is provided, successful concepts as well as potential challenges are identified, and promising directions for future research are highlighted.

Antibiofilm coatings based on protein-engineered polymers and antimicrobial peptides for preventing implant-associated infections

Implant-associated infections (IAIs) are one of the leading concerns in orthopedics and dentistry as they commonly lead to implant failure. The presence of biofilms and, increasingly frequently, drug-resistant bacteria further impairs the efficacy of conventional antibiotics. Immobilization of antimicrobial peptides (AMPs) on implant surfaces is a promising alternative to antibiotics for prevention of IAIs. In addition, the use of functional linkers for the AMP tethering enables to increase the antimicrobial potential and the bioactivities of the coating. In this study, an extracellular-matrix-mimicking system based on elastin-like recombinamers (ELRs) has been developed for the covalent anchoring of AMPs and investigated for use as a hybrid antibiofilm coating. A drip-flow biofilm reactor was used to simulate in vivo environmental dynamic conditions, thus showing that the presence of the AMPs in the hybrid coatings provided strong antibiofilm activity against monospecies and microcosm biofilm models of clinical relevance. These results, together with an excellent cytocompatibility towards primary gingival fibroblasts, encourage the use of ELRs as multivalent platforms for AMPs and open up a wide range of possibilities in the biofabrication of advanced coatings combining the antibiofilm potential of AMPs and the outstanding tunability and biomechanical properties of the ELRs.

Quercetin inhibits virulence properties of Porphyromas gingivalis in periodontal disease

Porphyromonas gingivalis is a causative agent in the onset and progression of periodontal disease. This study aims to investigate the effects of quercetin, a natural plant product, on P. gingivalis virulence properties including gingipain, haemagglutinin and biofilm formation. Antimicrobial effects and morphological changes of quercetin on P. gingivalis were detected. The effects of quercetin on gingipains activities and hemolytic, hemagglutination activities were evaluated using chromogenic peptides and sheep erythrocytes. The biofilm biomass and metabolism with different concentrations of quercetin were assessed by the crystal violet and MTT assay. The structures and thickness of the biofilms were observed by confocal laser scanning microscopy. Bacterial cell surface properties including cell surface hydrophobicity and aggregation were also evaluated. The mRNA expression of virulence and iron/heme utilization was assessed using real time-PCR. Quercetin exhibited antimicrobial effects and damaged the cell structure. Quercetin can inhibit gingipains, hemolytic, hemagglutination activities and biofilm formation at sub-MIC concentrations. Molecular docking analysis further indicated that quercetin can interact with gingipains. The biofilm became sparser and thinner after quercetin treatment. Quercetin also modulate cell surface hydrophobicity and aggregation. Expression of the genes tested was down-regulated in the presence of quercetin. In conclusion, our study demonstrated that quercetin inhibited various virulence factors of P. gingivalis.

Dual Self-Assembled Nanostructures from Intrinsically Disordered Protein Polymers with LCST Behavior and Antimicrobial Peptides

Antimicrobial peptides (AMPs) have attracted great interest as they constitute one of the most promising alternatives against drug-resistant infections. Their amphipathic nature not only provides them antimicrobial and immunomodulatory properties but also the ability to self-assemble into supramolecular nanostructures. Here, we propose their use as self-assembling domains to drive hierarchical organization of intrinsically disordered protein polymers (IDPPs). Using a modular approach, hybrid protein-engineered polymers were recombinantly produced, thus combining designer AMPs and a thermoresponsive IDPP, an elastin-like recombinamer (ELR). We exploited the ability of these AMPs and ELRs to self-assemble to develop supramolecular nanomaterials by way of a dual-assembly process. First, the AMPs trigger the formation of nanofibers; then, the thermoresponsiveness of the ELRs enables assembly into fibrillar aggregates. The interplay between the assembly of AMPs and ELRs provides an innovative molecular tool in the development of self-assembling nanosystems with potential use for biotechnological and biomedical applications.

Dual Oral Tissue Adhesive Nanofiber Membranes for pH-Responsive Delivery of Antimicrobial Peptides

Bioadhesive membranes with controllable and reversible underwater adhesion are desirable for several biomedical applications ranging from biosensing, drug/therapeutic delivery, and tissue regeneration. Here, we present dual soft mucosal and hard bone/enamel tissue adhesive nanofiber membranes composed of chitosan and pectin derivatives for pH-controlled delivery of antimicrobial peptides (AMPs) in the oral cavity. Ex vivo testing with porcine esophagus (soft mucosal mimic) indicated a 2-fold increase in the mucoadhesion of chitosan membranes with 0.05 wt % oxidized pectin coating, while the uncoated membranes exhibited 3-4-fold stronger adhesion to hydroxyapatite discs (enamel/hard bone mimic) compared to the coated membranes. The former is attributed to a synergistic interaction of surface nanofiber topography, intermolecular hydrogen bonding, and aldehyde-amine chemistry between surface polar groups and mucosal proteins, while the latter may arise from electrostatic interactions between cationic amines (-NH₃⁺) in chitosan and anionic phosphates (-PO₄^3-) in hydroxyapatite. Further, the dual hard-soft oral tissue adhesive nanofiber membranes loaded with cationic amphipathic AMPs (D-GL13K and IDR-1018) elicited pH-responsive AMP delivery and antimicrobial action comparable to chlorhexidine (CHX) against oral streptococci. Concurrently, the AMP loaded membranes were cytocompatible to both soft epithelial tissue-derived human oral keratinocytes and hard calvarial murine pre-osteoblast cells. We envision these membranes to function as adhesive gingival grafts and guided bone regeneration (GBR) membranes at the hard-soft tissue interface while simultaneously protecting against oral infections.

Supramolecular Peptide Assemblies as Antimicrobial Scaffolds

Antimicrobial discovery in the age of antibiotic resistance has demanded the prioritization of non-conventional therapies that act on new targets or employ novel mechanisms. Among these, supramolecular antimicrobial peptide assemblies have emerged as attractive therapeutic platforms, operating as both the bactericidal agent and delivery vector for combinatorial antibiotics. Leveraging their programmable inter- and intra-molecular interactions, peptides can be engineered to form higher ordered monolithic or co-assembled structures, including nano-fibers, -nets, and -tubes, where their unique bifunctionalities often emerge from the supramolecular state. Further advancements have included the formation of macroscopic hydrogels that act as bioresponsive, bactericidal materials. This systematic review covers recent advances in the development of supramolecular antimicrobial peptide technologies and discusses their potential impact on future drug discovery efforts.

A novel, rationally designed, hybrid antimicrobial peptide, inspired by cathelicidin and aurein, exhibits membrane-active mechanisms against Pseudomonas aeruginosa

Antimicrobial peptides (AMPs) are promising alternatives to classical antibiotics for the treatment of drug-resistant infections. Due to their versatility and unlimited sequence space, AMPs can be rationally designed by modulating physicochemical determinants to favor desired biological parameters and turned into novel therapeutics. In this study, we utilized key structural and physicochemical parameters, in combination with rational engineering, to design novel short α-helical hybrid peptides inspired by the well-known natural peptides, cathelicidin and aurein. By comparing homologous sequences and abstracting the conserved residue type, sequence templates of cathelicidin (P0) and aurein (A0) were obtained. Two peptide derivatives, P7 and A3, were generated by amino acid substitution based on their residue composition and distribution. In order to enhance antimicrobial activity, a hybrid analog of P7A3 was designed. The results demonstrated that P7A3 had higher antibacterial activity than the parental peptides with unexpectedly high hemolytic activity. Strikingly, C-terminal truncation of hybrid peptides containing only the α-helical segment (PA-18) and shorter derivatives confer potent antimicrobial activity with reduced hemolytic activity in a length‐dependent manner. Among all, PA-13, showed remarkable broad-spectrum antibacterial activity, especially against Pseudomonas aeruginosa with no toxicity. PA-13 maintained antimicrobial activity in the presence of physiological salts and displayed rapid binding and penetration activity which resulted in membrane depolarization and permeabilization. Moreover, PA-13 showed an anti-inflammatory response via lipopolysaccharide (LPS) neutralization with dose-dependent, inhibiting, LPS-mediated Toll-like receptor activation. This study revealed the therapeutic potency of a novel hybrid peptide, and supports the use of rational design in development of new antibacterial agents.

Interfacial Self-Assembly of Antimicrobial Peptide GL13K into Non-Fibril Crystalline β-Sheets

The need for new and potent antibiotics in an era of increasing multidrug resistance in bacteria has driven the search for new antimicrobial agents, including the design of synthetic antimicrobial peptides (AMPs). While a number of β-sheet forming AMPs have been proposed, their similarity to β-amyloids raises a number of concerns associated with neurodegenerative states. GL13K is an effective, synthetic AMP that selectively folds into β-sheets at anionic interfaces. Moreover, it is one of relatively few AMPs that preferentially fold into β-sheets without bridging disulfides. The interfacial activity of GL13K and its propensity to form amyloid fibrils have not been investigated. Using structural studies at the air/water interface and in the absence of anionic lipids, we demonstrate that while GL13K does form crystalline β-sheets, it does not self-assemble into fibrils. This work emphasizes the requirement for a single charged amino acid in the hydrophobic face to prevent fibril formation in synthetic peptides.

Modulation of supramolecular self-assembly of an antimicrobial designer peptide by single amino acid substitution: Implications on peptide activity

Hydrophobicity and charge are key properties of antimicrobial peptides (AMPs). We compared the self-assembly performance and its correlation with antimicrobial activity of a designer AMP and analogues with substitution of hydrophobic or cationic residues by alanine. Peptides that formed supramolecular self-assemblies under the studied conditions were those that have higher antimicrobial potency.

In vivo activity and low toxicity of the second-generation antimicrobial peptide DGL13K

Antimicrobial peptides have been evaluated as possible alternatives to traditional antibiotics. The translational potential of the antimicrobial peptide DGL13K was tested with focus on peptide toxicity and in vivo activity in two animal models. DGL13K was effective against Pseudomonas aeruginosa, Staphylococcus aureus and methicillin-resistant S. aureus with minimal bactericidal concentrations similar to the minimal inhibitory concentration. The peptide showed low toxicity to human red blood cells and HEK cells with median lethal dose around 1 mg/ml. The median lethal dose in greater wax moth larvae (Galleria mellonella) was about 125mg/kg while the peptide caused no skin toxicity in a mouse model. A novel high-throughput luminescence assay was used to test peptide activity in infected G. mellonella, thus reducing vertebrate animal use. DGL13K killed P. aeruginosa in both the G. mellonella model and a mouse burn wound infection model, with bacterial viability 3-10-fold lower than in untreated controls. Future experiments will focus on optimizing peptide delivery, dose and frequency to further improve the antibacterial effect.

Hydrophobic and antimicrobial dentin: A peptide-based 2-tier protective system for dental resin composite restorations

Dental caries, i.e., tooth decay mediated by bacterial activity, is the most widespread chronic disease worldwide. Carious lesions are commonly treated using dental resin composite restorations. However, resin composite restorations are prone to recurrent caries, i.e., reinfection of the surrounding dental hard tissues. Recurrent caries is mainly a consequence of waterborne and/or biofilm-mediated degradation of the tooth-restoration interface through hydrolytic, acidic and/or enzymatic challenges. Here we use amphipathic antimicrobial peptides to directly coat dentin to provide resin composite restorations with a 2-tier protective system, simultaneously exploiting the physicochemical and biological properties of these peptides. Our peptide coatings modulate dentin's hydrophobicity, impermeabilize it, and are active against multispecies biofilms derived from caries-active individuals. Therefore, the coatings hinder water penetration along the otherwise vulnerable dentin/restoration interface, even after in vitro aging, and increase its resistance against degradation by water, acids, and saliva. Moreover, they do not weaken the resin composite restorations mechanically. The peptide-coated highly-hydrophobic dentin is expected to notably improve the service life of resin composite restorations and to enable the development of entirely hydrophobic restorative systems. The peptide coatings were also antimicrobial and thus, they provide a second tier of protection preventing re-infection of tissues in contact with restorations. STATEMENT OF SIGNIFICANCE: We present a technology using designer peptides to treat the most prevalent chronic disease worldwide; dental caries. Specifically, we used antimicrobial amphipathic peptides to coat dentin with the goal of increasing the service life of the restorative materials used to treat dental caries, which is nowadays 5 years on average. Water and waterborne agents (enzymes, acids) degrade restorative materials and enable re-infection at the dentin/restoration interface. Our peptide coatings will hinder degradation of the restoration as they produced highly hydrophobic and antimicrobial dentin/material interfaces. We anticipate a high technological and economic impact of our technology as it can notably reduce the lifelong dental bill of patients worldwide. Our findings can enable the development of restorations with all-hydrophobic and so, more protective components.

Self-assembly dynamics and antimicrobial activity of all l- and d-amino acid enantiomers of a designer peptide

Recent studies have shown that antimicrobial peptides (AMPs) can self-assemble into supramolecular structures, but this has been overlooked as causative of their antimicrobial activity. Also, the higher antimicrobial potency of d-enantiomers compared to l-enantiomers of AMPs cannot always be attributed to their different resistance to protease degradation. Here, we tested all l- and d-amino acid versions of GL13K, an AMP derived from a human protein, to study structural links between the AMP secondary structure, supramolecular self-assembly dynamics, and antimicrobial activity. pH dependence and the evolution of secondary structures were related to a self-assembly process with differences among these AMPs. The two GL13K enantiomers formed analogous self-assembled twisted nanoribbon structures, but d-GL13K initiated self-assembly faster and had notably higher antimicrobial potency than l-GL13K. A non-antimicrobial scrambled amino acid version of l-GL13K assembled at a much higher pH to form distinctively different self-assembled structures than l-GL13K. Our results support a functional relationship between the AMP self-assembly and their antimicrobial activity.

A D-enantiomer of the antimicrobial peptide GL13K evades antimicrobial resistance in the Gram positive bacteria Enterococcus faecalis and Streptococcus gordonii

Antimicrobial peptides represent an alternative to traditional antibiotics that may be less susceptible to bacterial resistance mechanisms by directly attacking the bacterial cell membrane. However, bacteria have a variety of defense mechanisms that can prevent cationic antimicrobial peptides from reaching the cell membrane. The L- and D-enantiomers of the antimicrobial peptide GL13K were tested against the Gram-positive bacteria Enterococcus faecalis and Streptococcus gordonii to understand the role of bacterial proteases and cell wall modifications in bacterial resistance. GL13K was derived from the human salivary protein BPIFA2. Minimal inhibitory concentrations were determined by broth dilution and a serial assay used to determine bacterial resistance. Peptide degradation was determined in a bioassay utilizing a luminescent strain of Pseudomonas aeruginosa to detect peptide activity. Autolysis and D-alanylation-deficient strains of E. faecalis and S. gordonii were tested in autolysis assays and peptide activity assays. E. faecalis protease inactivated L-GL13K but not D-GL13K, whereas autolysis did not affect peptide activity. Indeed, the D-enantiomer appeared to kill the bacteria prior to initiation of autolysis. D-alanylation mutants were killed by L-GL13K whereas this modification did not affect killing by D-GL13K. The mutants regained resistance to L-GL13K whereas bacteria did not gain resistance to D-GL13K after repeated treatment with the peptides. D-alanylation affected the hydrophobicity of bacterial cells but hydrophobicity alone did not affect GL13K activity. D-GL13K evades two resistance mechanisms in Gram-positive bacteria without giving rise to substantial new resistance. D-GL13K exhibits attractive properties for further antibiotic development.

Regulation of antilipopolysaccharide factors, ALFPm3 and ALFPm6, in Penaeus monodon

ALFPm6, a member of antimicrobial peptide in the antilipopolysaccharide factor (ALF) family from Penaeus monodon, plays important roles in shrimp immunity against pathogens. However, its antimicrobial activity and underlying mechanism have not been reported. The synthetic cyclic ALFPm6#29–52 peptide (cALFPm6#29–52) corresponding to the ALFPm6 LPS-binding domain can agglutinate and exhibited bacterial killing activity toward a Gram-negative bacterium, Escherichia coli 363 and Gram-positive bacteria, Bacillus megaterium, Aerococcus viridans, and Micrococcus luteus, with MIC values of 25–50 μM. Specifically, ALFPm6 and ALFPm3, the most abundant ALF isoforms, are different in terms of gene expression patterns upon pathogen infections. Herein, the regulation of ALFPm3 and ALFPm6 gene expression was studied. The 5′-upstream and promoter sequences were identified and the putative transcription factor (TF)-binding sites were predicted. The narrow down assay indicated that the ALFPm3 promoter and partial promoter of the ALFPm6 active regions were located at nucleotide positions (−814/+302) and (−282/+85), respectively. Mutagenesis of selected TF-binding sites revealed that Rel/NF-κB (−280/−270) of ALFPm3 and C/EBPβ (−88/−78) and Sp1 (−249/−238) sites of ALFPm6 were the activator-binding sites. Knockdown of the PmMyD88 and PmRelish genes in V. harveyi-infected shrimp suggested that the ALFPm3 gene was regulated by Toll and IMD pathways, while the ALFPm6 gene was regulated by the Toll pathway.

In vivo osseointegration of dental implants with an antimicrobial peptide coating

This study aimed to evaluate the in vivo osseointegration of implants with hydrophobic antimicrobial GL13K-peptide coating in rabbit femoral condyles by micro-CT and histological analysis. Six male Japanese Rabbits (4 months old and weighing 2.5 kg each) were included in this study. Twelve implants (3.75 mm wide, 7 mm long) were randomly distributed in two groups, with six implants in the experimental group coated with GL13K peptide and six implants in the control group without surface coating. Each implant in the test and the control group was randomly implanted in the left or right side of femoral condyles. On one side randomly-selected of the femur, each rabbit received a drill that was left without implant as control for the natural healing of bone. After 3 weeks of healing radiographic evaluation of the implant sites was taken. After 6 weeks of healing, rabbits were sacrificed for evaluation of the short-term osseointegration of the dental implants using digital radiography, micro-CT and histology analysis. To perform evaluation of osseointegration, implant location and group was double blinded for surgeon and histology/radiology researcher. Two rabbits died of wound infection in sites with non-coated implants 2 weeks after surgery. Thus, at least four rabbits per group survived after 6 weeks of healing. The wounds healed without suppuration and inflammation. No implant was loose after 6 weeks of healing. Radiography observations showed good osseointegration after 3 and 6 weeks postoperatively, which proved that the tissues followed a natural healing process. Micro-CT reconstruction and analysis showed that there was no statistically significant difference (P > 0.05) in volume of bone around the implant between implants coated with GL13K peptide and implants without coating. Histomorphometric analysis also showed that the mineralized bone area was no statistically different (P > 0.05) between implants coated with GL13K peptide and implants without coating. This study demonstrates that titanium dental implants with an antimicrobial GL13K coating enables in vivo implant osseointegration at similar bone growth rates than gold-standard non-coated dental implants up to 6 weeks of implantation in rabbit femurs.

Antimicrobial Peptides: Mechanisms of Action and Resistance

More than 40 antimicrobial peptides and proteins (AMPs) are expressed in the oral cavity. These AMPs have been organized into 6 functional groups, 1 of which, cationic AMPs, has received extensive attention in recent years for their promise as potential antibiotics. The goal of this review is to describe recent advances in our understanding of the diverse mechanisms of action of cationic AMPs and the bacterial resistance against these peptides. The recently developed peptide GL13K is used as an example to illustrate many of the discussed concepts. Cationic AMPs typically exhibit an amphipathic conformation, which allows increased interaction with negatively charged bacterial membranes. Peptides undergo changes in conformation and aggregation state in the presence of membranes; conversely, lipid conformation and packing can adapt to the presence of peptides. As a consequence, a single peptide can act through several mechanisms depending on the peptide's structure, the peptide:lipid ratio, and the properties of the lipid membrane. Accumulating evidence shows that in addition to acting at the cell membrane, AMPs may act on the cell wall, inhibit protein folding or enzyme activity, or act intracellularly. Therefore, once a peptide has reached the cell wall, cell membrane, or its internal target, the difference in mechanism of action on gram-negative and gram-positive bacteria may be less pronounced than formerly assumed. While AMPs should not cause widespread resistance due to their preferential attack on the cell membrane, in cases where specific protein targets are involved, the possibility exists for genetic mutations and bacterial resistance. Indeed, the potential clinical use of AMPs has raised the concern that resistance to therapeutic AMPs could be associated with resistance to endogenous host-defense peptides. Current evidence suggests that this is a rare event that can be overcome by subtle structural modifications of an AMP.

HemoPred: a web server for predicting the hemolytic activity of peptides

AIM

Toxicity arising from hemolytic activity of peptides hinders its further progress as drug candidates.

MATERIALS & METHODS

This study describes a sequence-based predictor based on a random forest classifier using amino acid composition, dipeptide composition and physicochemical descriptors (named HemoPred).

RESULTS

This approach could outperform previously reported method and typical classification methods (e.g., support vector machine and decision tree) verified by fivefold cross-validation and external validation with accuracy and Matthews correlation coefficient in excess of 95% and 0.91, respectively. Results revealed the importance of hydrophobic and Cys residues on α-helix and β-sheet, respectively, on the hemolytic activity.

CONCLUSION

A sequence-based predictor which is publicly available as the web service of HemoPred, is proposed to predict and analyze the hemolytic activity of peptides.

Antimicrobial GL13K peptide coatings killed and ruptured the wall of Streptococcus gordonii and prevented formation and growth of biofilms

Infection is one of the most prevalent causes for dental implant failure. We have developed a novel antimicrobial peptide coating on titanium by immobilizing the antimicrobial peptide GL13K. GL13K was developed from the human salivary protein BPIFA2. The peptide exhibited MIC of 8 µg/ml against planktonic Pseudonomas aeruginosa and their biofilms were reduced by three orders of magnitude with 100 µg/ml GL13K. This peptide concentration also killed 100% of Streptococcus gordonii. At 1 mg/ml, GL13K caused less than 10% lysis of human red blood cells, suggesting low toxicity to mammalian cells. Our GL13K coating has also previously showed bactericidal effect and inhibition of biofilm growth against peri-implantitis related pathogens, such as Porphyromonas gingivalis. The GL13K coating was cytocompatible with human fibroblasts and osteoblasts. However, the bioactivity of antimicrobial coatings has been commonly tested under (quasi)static culture conditions that are far from simulating conditions for biofilm formation and growth in the oral cavity. Oral salivary flow over a coating is persistent, applies continuous shear forces, and supplies sustained nutrition to bacteria. This accelerates bacteria metabolism and biofilm growth. In this work, the antimicrobial effect of the coating was tested against Streptococcus gordonii, a primary colonizer that provides attachment for the biofilm accretion by P. gingivalis, using a drip-flow biofilm bioreactor with media flow rates simulating salivary flow. The GL13K peptide coatings killed bacteria and prevented formation and growth of S. gordonii biofilms in the drip-flow bioreactor and under regular mild-agitation conditions. Surprisingly the interaction of the bacteria with the GL13K peptide coatings ruptured the cell wall at their septum or polar areas leaving empty shell-like structures or exposed protoplasts. The cell wall rupture was not detected under regular culture conditions, suggesting that cell wall rupture induced by GL13K peptides also requires media flow and possible attendant biological sequelae of the conditions in the bioreactor.

Characterization and function analysis of an anti-lipopolysaccharide factor (ALF) from the Chinese shrimp Fenneropenaeus chinensis

Anti-lipopolysaccharide factor (ALF) is one of the widely-studied antimicrobial peptides (AMPs) with broad-spectrum antibacterial activity and antiviral property. Previous studies show the existence of multiform of ALFs in crustacean which are important for immunity of the animals. In the present study, we characterized one isoform of ALF from the Chinese shrimp Fenneropenaeus chinensis (FcALF2). Tissue distribution analysis revealed that FcALF2 showed the highest expression level in the lymphoid organ (Oka) of the shrimp. The expression level of FcALF2 in shrimp was significantly up-regulated when they were injected with Micrococcus lysodeikticus and Vibrio anguillarum. A peptide corresponding to the LPS-binding domain of FcALF2 (FcALF2-LBD) was synthesized to analyze its antimicrobial activities. Data demonstrated that FcALF2-LBD possessed strong antibacterial activity against Gram-positive bacteria Micrococcus luteus and M.lysodeikticus with MIC ranges of 2-4 μM and 1-2 μM respectively and significant inhibition activity against white spot syndrome virus (WSSV). The antibacterial activities of the sequence modified peptides (FcALF2-LBDb, FcALF2-LBDv) were apparently enhanced and broadened after the amount of basic amino acids was increased in the synthetic LPS-binding domain. These data provide more insights into understanding the function of LPS-binding domain of ALF and the role of ALF in shrimp immunity.

Surface-conjugated antimicrobial peptide leucocin a displays high binding to pathogenic gram-positive bacteria

Leucocin A, a representative class IIa bacteriocin, is a ribosomally synthesized antimicrobial peptide (AMP) that displays potent activity against specific gram-positive bacteria. The antibacterial activity of such peptides is preceded by the binding event that can be utilized for studying specific peptide-bacteria interactions. In this study, 37-residue Leucocin A (LeuA) was synthesized using solid-phase peptide synthesis and covalently immobilized on gold substrates from either the N- or C-terminal. Both the peptide monolayers on gold substrates were incubated separately with five strains of gram-positive bacteria and displayed differential binding to different strains with highest binding to pathogenic Listeria monocytogenes . The C-terminally immobilized LeuA showed higher bacterial binding compared to the N-terminally attached LeuA. The full length immobilized LeuA (37-residue) was active as well as displayed higher bacterial binding (73 ± 6 bacteria/100 μm(2)) compared to 24-residue inactive LeuA fragment (40 ± 8 bacteria/100 μm(2)) from the C-terminal region. The high and specific bacterial binding ability of LeuA functionalized surfaces support the potential use of class IIa bacteriocins in antimicrobial peptide-based diagnostic platforms.

Ovocalyxin-36 is a pattern recognition protein in chicken eggshell membranes

The avian eggshell membranes are essential elements in the fabrication of the calcified shell as a defense against bacterial penetration. Ovocalyxin-36 (OCX-36) is an abundant avian eggshell membrane protein, which shares protein sequence homology to bactericidal permeability-increasing protein (BPI), lipopolysaccharide-binding protein (LBP) and palate, lung and nasal epithelium clone (PLUNC) proteins. We have developed an efficient method to extract OCX-36 from chicken eggshell membranes for purification with cation and anion exchange chromatographies. Purified OCX-36 protein exhibited lipopolysaccharide (LPS) binding activity and bound lipopolysaccharide (LPS) from Escherichia coli O111:B4 in a dose-dependent manner. OCX-36 showed inhibitory activity against growth of Staphylococcus aureus ATCC 6538. OCX-36 single nucleotide polymorphisms (SNPs) were verified at cDNA 211 position and the corresponding proteins proline-71 (Pro-71) or serine-71 (Ser-71) were purified from eggs collected from genotyped hens. A significant difference between Pro-71 and Ser-71 OCX-36 for S. aureus lipoteichoic acid (LTA) binding activity was detected. The current study is a starting point to understand the innate immune role that OCX-36 may play in protection against bacterial invasion of both embryonated eggs (relevant to avian reproductive success) and unfertilized table eggs (relevant to food safety).

Bio-inspired stable antimicrobial peptide coatings for dental applications

We developed a novel titanium coating that has applications for preventing infection-related implant failures in dentistry and orthopedics. The coating incorporates an antimicrobial peptide, GL13K, derived from parotid secretory protein, which has been previously shown to be bactericidal and bacteriostatic in solution. We characterized the resulting physicochemical properties, resistance to degradation, activity against Porphyromonas gingivalis and in vitro cytocompatibility. Porphyromonas gingivalis is a pathogen associated with dental peri-implantitis, an inflammatory response to bacteria resulting in bone loss and implant failure. Our surface modifications obtained a homogeneous, highly hydrophobic and strongly anchored GL13K coating that was resistant to mechanical, thermochemical and enzymatic degradation. The GL13K coatings had a bactericidal effect and thus significantly reduced the number of viable bacteria compared to control surfaces. Finally, adequate proliferation of osteoblasts and human gingival fibroblasts demonstrated the GL13K coating's cytocompatibility. The robustness, antimicrobial activity and cytocompatibility of GL13K-biofunctionalized titanium make it a promising candidate for sustained inhibition of bacterial biofilm growth. This surface chemistry provides a basis for development of multifunctional bioactive surfaces to reduce patient morbidities and improve long-term clinical efficacy of metallic dental and orthopedic implants.

Antimicrobial peptide GL13K is effective in reducing biofilms of Pseudomonas aeruginosa

Human parotid secretory protein (PSP; BPIF2A) is predicted to be structurally similar to bactericidal/permeability-increasing protein and lipopolysaccharide (LPS)-binding protein. Based on the locations of known antimicrobial peptides in the latter two proteins, potential active peptides in the PSP sequence were identified. One such peptide, GL13NH2 (PSP residues 141 to 153) was shown previously to interfere with LPS binding and agglutinate bacteria without bactericidal activity. By introducing three additional positively charged lysine residues, the peptide was converted to the novel bactericidal cationic peptide GL13K (MIC for Pseudomonas aeruginosa, 8 μg/ml [5.6 μM]). We investigated the antibiofilm activity of GL13K against static, monospecies biofilms of P. aeruginosa PAO1. Two-hour exposure of a 24-h biofilm to 64 μg/ml (44.8 μM) GL13K reduced biofilm bacteria by 10(2), and 100 μg/ml (70 μM) GL13K reduced bacteria by 10(3). Similar results could be achieved on 48-h-old biofilms. Lower concentrations of GL13K (32 μg/ml [22.4 μM]) were successful in reducing biofilm cell numbers in combination with tobramycin. This combination treatment also achieved total eradication of the biofilm in a majority (67.5%) of tested samples. An alanine scan of GL13K revealed the importance of the leucine residue in position six of the peptide sequence, where replacement led to a loss of antibiofilm activity, whereas the impact of replacing charged residues was less pronounced. Bacterial metalloproteases were found to partially inactivate GL13K but not a d amino acid version of the peptide.