Hydrothermal synthesis of cobalt carbonates using different counter ions: An efficient precursor to nano-sized cobalt oxide (Co3O4)

The Addition of Co into CuO-ZnO Oxides Triggers High Antibacterial Activity and Low Cytotoxicity

In the present work, a simple two-step method is proposed for mixed oxide synthesis aimed at the achievement of antibacterial nanomaterials. In particular, Cu, Zn and Co have been selected to achieve single-, double- and triple-cation oxides. The synthesized samples are characterized by XRD, IR, SEM and EDX, indicating the formation of either crystalline or amorphous hydrocarbonate precursors. The oxides present one or two crystalline phases, depending on their composition; the triple-cation oxides form a solid solution of tenorite. Also, the morphology of the samples varies with the composition, yielding nanoparticles, filaments and hydrangea-like microaggregates. The antibacterial assays are conducted against E. coli and indicate an enhanced efficacy, especially displayed by the oxide containing 3% Co and 9% Zn incorporated into the CuO lattice. The oxides with the highest antibacterial properties are tested for their cytotoxicity, indicating a low toxicity impact, in line with literature data.

Structural, Spectroscopic, and Thermal Decomposition Features of [Carbonatotetraamminecobalt(III)] Iodide—Insight into the Simultaneous Solid-Phase Quasi-Intramolecular Redox Reactions

[κ2-O,O′-Carbonatotetraamminecobalt(III)] iodide, or [Co(NH3)4CO3]I, named in this paper as compound 1, was prepared and characterized comprehensively with spectroscopic (IR, Raman and UV) and single-crystal X-ray diffraction methods. Compound 1 was orthorhombic, and isomorphous with the analogous bromide. The four ammonia ligands and the carbonate anion were coordinated to the central cobalt cation in a distorted octahedral geometry. The carbonate ion formed a four-membered symmetric planar chelate ring. The complex cations were bound to each other by N-H···O hydrogen bonds and formed zigzag sheets via an extended 2D hydrogen bond network. The complex cations and iodide ions were arranged into ion pairs and each cation bound its iodide pair through three hydrogen bonds. The thermal decomposition started with the oxidation of the iodide ion by CoIII in the solid phase resulting in [Co(NH3)4CO3] and I2. This intermediate CoII-complex in situ decomposed into Co3O4 and C-N bond containing intermediates. In inert atmosphere, CO or C-N bond containing compounds, and also, due to the in situ decomposition of CoCO3 intermediate, Co3O4 was formed. The quasi-intramolecular solid-phase redox reaction of [Co(NH3)4CO3] might have resulted in the formation of C-N bond containing compounds with substoichiometric release of ammonia and CO2 from compound 1. The C-N bond containing intermediates reduced Co3O4 into CoO and Co, whereas in oxygen-containing atmosphere, the end-product was Co3O4, even at 200 °C, and the endothermic ligand loss reaction coincided with the consecutive exothermic oxidation processes.

Synthesis of Co-Ni Alloy Particles with the Structure of a Solid Substitution Solution by Precipitation in a Supercritical Carbon Dioxide

Mixed Co-Ni bimetallic systems with the structure of a solid substitution solution have been synthesized using the supercritical antisolvent precipitation (SAS) method, which uses supercritical CO₂ as an antisolvent. The systems obtained have been characterized in detail using X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), Fourier-transform infrared (FTIR) spectroscopy, and magnetostatic measurements. It has been found that Co-enriched systems have a defective hexagonal close-packed (hcp) structure, which was described by a model which embedded cubic fragments of packaging into a hexagonal close-packed (hcp) structure. It has been shown that an increase in water content at the precipitation stage leads to a decrease in the size of cubic fragments and a more uniform distribution of them in Co-enriched systems. It has also been shown that mixed systems have the greatest coercivity in the line of samples. Ni-enriched bimetallic systems have a cubic close-packed (ccp) structure with modified crystal lattice parameters.

Recent Advances on Synthesis of CoCO3 with Controlled Morphologies

Cobalt carbonates and derivatives represent most promising cost-effective materials for energy storage, conversion and upgrading. Morphology determines the performances, as size, shape and electronic configuration are key factors for tunable properties in the area of batteries, catalysis, magnetics and plasmonics. However, there is lack of insights in literature on morphological control of cobalt carbonates during hydrothermal and solvothermal conditions. Therefore, this review provides detailed discussion on synthesis, formation mechanism and morphological control of nanosheets, wires, spheres and cubes of cobalt carbonates. Furthermore, the influence of experimental conditions and plausible mechanism which govern the growing processes were further discussed in details. The outcome of this short review will offer insights into rational design of inexpensive metal carbonates for numerous other energy and environment applications.

Solid-State Preparation of Metal and Metal Oxides Nanostructures and Their Application in Environmental Remediation

Nanomaterials have attracted much attention over the last decades due to their very different properties compared to those of bulk equivalents, such as a large surface-to-volume ratio, the size-dependent optical, physical, and magnetic properties. A number of solution fabrication methods have been developed for the synthesis of metal and metal oxides nanoparticles, but few solid-state methods have been reported. The application of nanostructured materials to electronic solid-state devices or to high-temperature technology requires, however, adequate solid-state methods for obtaining nanostructured materials. In this review, we discuss some of the main current methods of obtaining nanomaterials in solid state, and also we summarize the obtaining of nanomaterials using a new general method in solid state. This new solid-state method to prepare metals and metallic oxides nanostructures start with the preparation of the macromolecular complexes chitosan·Xn and PS-co-4-PVP·MXn as precursors (X = anion accompanying the cationic metal, n = is the subscript, which indicates the number of anions in the formula of the metal salt and PS-co-4-PVP = poly(styrene-co-4-vinylpyridine)). Then, the solid-state pyrolysis under air and at 800 °C affords nanoparticles of M°, M_xO_y depending on the nature of the metal. Metallic nanoparticles are obtained for noble metals such as Au, while the respective metal oxide is obtained for transition, representative, and lanthanide metals. Size and morphology depend on the nature of the polymer as well as on the spacing of the metals within the polymeric chain. Noticeably in the case of TiO₂, anatase or rutile phases can be tuned by the nature of the Ti salts coordinated in the macromolecular polymer. A mechanism for the formation of nanoparticles is outlined on the basis of TG/DSC data. Some applications such as photocatalytic degradation of methylene by different metal oxides obtained by the presented solid-state method are also described. A brief review of the main solid-state methods to prepare nanoparticles is also outlined in the introduction. Some challenges to further development of these materials and methods are finally discussed.

Synthesis, Characterization and Anti-Microbial Activity of Oxalate-Assisted CO3O4 Nanoparticles Derived from Homogeneous Co-Precipitation Method

Nano-sized cobalt oxide particles exhibit unique and fascinating physical, chemical and anti-microbial activity owing to their large surface to volume ratio. The study of metal oxide nanoparticles interaction with pathogenic microorganisms is great importance for various biomedical applications. The main purpose of this work is to study the anti-bacterial and anti-fungal behavior of cobalt oxide (CO3O4) nanoparticles against gram-positive and gram-negative bacterial strains and different fungi. The structure and morphology of CO3O4 nanoparticles were characterized by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and UV-Visible Spectroscopy, respectively. The CO3O4 nanoparticles showed a significant anti-bacterial activity against two gram-positive bacteria, Staphylococcusaureus (G[Formula: see text]), Streptococcus mutans (G[Formula: see text]), and two gram-negative bacteria, Klebsilla pneumonia (G[Formula: see text]), E. coli (G[Formula: see text]), and it shows a good anti-fungal activity against the two different fungal i.e., Aspergillus flavus (F) and Aspergillus niger (F), at different solvents. It was noted that synthesized CO3O4 nanoparticles exhibited the solvent-dependent anti-bacterial activity against all tested bacterial strains. CO3O4 NPs could be employed effectively for anti-microbial applications.

Interconnected Copper Cobaltite Nanochains as Efficient Electrocatalysts for Water Oxidation in Alkaline Medium

The present work is focused on the protective-agent-free synthesis of interconnected copper cobaltite (Cu_0.3Co_2.7O₄) nanochains by temperature-controlled solvothermal method followed by post-thermal treatment of the precursors. Furthermore, Cu_0.3Co_2.7O₄ interconnected nanochains are employed as electrocatalyst for water oxidation in alkaline medium for the first time. Extensive studies of physiochemical properties showed the formation of interconnected 1D nanochains of Cu_0.3Co_2.7O₄ exhibiting a larger specific surface area (139.5 m² g^-1) and enhanced electrochemical water oxidation ability. It delivered excellent mass activity (∼50.0 A g^-1), high anodic current density (∼124.9 mA cm^-2 at 1.75 V versus reversible hydrogen electrode), and turnover frequency (∼4.26 × 10^-2 s^-1) in 1.0 M KOH. These Cu_0.3Co_2.7O₄ nanochains also demonstrated low overpotential (∼351 mV) and good cycling stability (1000 cycles) in strong alkaline media. The fabricated Cu_0.3Co_2.7O₄ nanochains could be a good alternative to the commercial OER electrocatalysts (RuO₂ and IrO₂) and also advantageous to the development of efficient, cost-effective, and durable electrocatalysts for electrochemical water splitting.

Synthesis and characterization of a ZnMn2O4nanostructure as a chemical nanosensor: a facile and new approach for colorimetric determination of omeprazole and lansoprazole drugs

ZnMn₂O₄nanostructure was preparedviaan auto-combustion method using different fuels, and it was used as a chemical sensor for determination of omeprazole and lansoprazole drugs.

Design, controlled synthesis, and properties of 2D CeO2/NiO heterostructure assemblies

Synthetic protocols to generate well-integrated frameworks of known composition are important for the rational design of advanced materials.

Synthesis and magnetic properties of nanostructured metallic Co, Mn and Ni oxide materials obtained from solid-state metal-macromolecular complex precursors

Reaction of chitosan with metallic salts gives nanostructured Mn₂O₃, Co₃O₄ and NiO. Graphitic carbon is formed over the nanostructured oxides.

A process to enhance the specific surface area and capacitance of hydrothermally reduced graphene oxide

The impact of post-synthesis processing in reduced graphene oxide materials for supercapacitor electrodes has been analyzed. A comparative study of vacuum, freeze and critical point drying was carried out for hydrothermally reduced graphene oxide demonstrating that the optimization of the specific surface area and preservation of the porous network are critical to maximize its supercapacitance performance. As described below, using a supercritical fluid as the drying medium, unprecedented values of the specific surface area (364 m² g^-1) and supercapacitance (441 F g^-1) for this class of materials have been achieved.

A controlled, template-free, and hydrothermal synthesis route to sphere-like α-Fe2O3 nanostructures for textile dye removal

Iron carbonate nanospheres were synthesized via hydrothermal treatment of aqueous solutions of iron sulfate, ascorbic acid and ammonium carbonate with a molar ratio of 1 : 1 : 3, respectively, at 140 °C for 1.5 h.

Facile controllable hydrothermal route for a porous CoMn2O4 nanostructure: synthesis, characterization, and textile dye removal from aqueous media

We herein report the synthesis of a pure sphere-like spinel CoMn₂O₄ nanostructure using a facile and surfactant-free hydrothermal approach followed by a thermal decomposition of the as-prepared CoCO₃/MnCO₃ composite precursor.

Cobalt ferrite nanoparticles via a template-free hydrothermal route as an efficient nano-adsorbent for potential textile dye removal

We have reported herein the preparation of a pure cobalt ferrite (CoFe₂O₄) nanostructure, as an efficient nano-adsorbent, via a template-free hydrothermal and post thermal conversion route.

Evaluation of alpha and gamma aluminum oxide nanoparticle accumulation, toxicity, and depuration in Artemia salina larvae

In this study, Artemia salina (crustacean filter feeders) larvae were used as a test model to investigate the toxicity of aluminum oxide nanoparticles (Al2O3 NPs) on marine microorganisms. The uptake, toxicity, and elimination of α-Al2O3 (50 nm and 3.5 μm) and γ-Al2O3 (5 nm and 0.4 μm) NPs were studied. Twenty-four and ninety-six hour exposures of different concentrations of Al2O3 NPs to Artemia larvae were conducted in a seawater medium. When suspended in water, Al2O3 NPs aggregated substantially with the sizes ranging from 6.3 nm to >0.3 µm for spherical NPs and from 250 to 756 nm for rod-shaped NPs. The phase contrast microscope images showed that NPs deposited inside the guts as aggregates. Inductively coupled plasma mass spectrometry analysis showed that large particles (3.5 μm α-Al2O3) were not taken up by Artemia, whereas fine NPs (0.4 μm γ-Al2O3) and ultra-fine NPs (5 nm γ-Al2O3 and 50 nm α-Al2O3) accumulated substantially. Differences in toxicity were detected as changing with NP size and morphology. The malondialdehyde levels indicated that smaller γ-Al2O3 (5 nm) NPs were more toxic than larger γ-Al2O3 (0.4 µm) particulates in 96 h. The highest mortality was measured as 34% in 96 h for γ-Al2O3 NPs (5 nm) at 100 mg/L (LC50 > 100 mg/L). γ-Al2O3 NPs were more toxic than α-Al2O3 NPs at all conditions.

A novel synthetic route for magnesium aluminate (MgAl2O4) nanoparticles using sol-gel auto combustion method and their photocatalytic properties

In this paper a novel and inexpensive route for the preparation of spinel magnesium aluminate nanoparticles (MgAl2O4) is proposed. Magnesium aluminate photocatalyst was synthesized via sol-gel auto combustion method using oxalic acid, urea, and citric acid fuels at 350°C. Subsequently, the burnt samples were calcined at different temperatures. The pure spinel MgAl2O4 with average crystallite size 27.7, 14.6 and 15.65nm was obtained at 800°C calcinations using the aforementioned fuels, respectively. The obtained samples were characterized by powder X-ray diffraction, Fourier transform infrared, UV-Vis spectroscopy, transmission electron microscope, scanning electron microscope. The photo catalytic activity of MgAl2O4 product was studied by performing the decomposition of Reactive Red Me 4BL dye under UV illumination or sunlight irradiation. The dye considerably photocatalytically degraded by 90.0% and 95.45% under UV and sunlight irradiation, respectively, within ca. 5h with pseudo first order rate constants of 5.85×10(-3) and 8.38×10(-3)min(-1), respectively.