Catalytic performance and electrochemical behaviour of Metal–organic frameworks: MIL-101(Fe) versus NH2-MIL-101(Fe)

MOF-Modified Microrollers for Bioimaging and Sustained Antibiotic Delivery

Central nervous system (CNS) infections caused by neurosurgery or intrathecal injection of contaminated cerebrospinal fluid are a common and difficult complication. Drug-delivery microrobots are among the latest solutions proposed for antibacterial applications. However, there is a lack of research into developing microrobots with the ability to sustain antibody delivery while can move efficiently in the CNS. Here, biocompatible antibacterial metal-organic framework (MOF)-modified microrollers (MMRs) to combat CNS infections are proposed. The MMRs are iron-based metal-organic framework (NH2-MIL-101(Fe)) modified for enhanced adsorption and Fe/Al coated for magnetic actuation and biocompatibility. The MMRs have demonstrated a faster and unhindered magnetically actuated motion on the uneven biological tissue surface in an organ-on-a-chip that mimicked the CNS compared to it on smooth surface. CFD results consistently align with the experimental findings. The MMRs can be loaded with rhodamine 6G for bioimaging, allowing them to be imaged through sections of the main human tissues by fluorescence microscopy, or tetracycline hydrochloride for antibiotic delivery, allowing them to inhibit the growth of Staphylococcus aureus biofilms by sustained release of antibiotics for 9 days. This study provides a strategy to integrate high-capacity adsorption material with magnetically actuated locomotion for long-term targeted antibacterial applications in biological environments.

Mechanistic study of visible light driven photocatalytic degradation of clofibric acid using Fe-based metal organic frameworks (MOFs)

Although a series of past studies proved the potential usage of Fe-based metal-organic frameworks (MOFs) as photocatalysts, there remains a knowledge gap of the photocatalytic mechanism stemming from the challenge to separate the simultaneous sorption and photocatalytic degradation. Thus, this article aimed to suggest a novel approach by desorbing target molecules during photocatalysis to excavate the underlying mechanisms of sorption and photocatalytic degradation. In this study, two Fe-based MOFs, MIL-101(Fe) and MIL-101(Fe)-NH2, were selected to remove clofibric acid under visible light irradiation. Prior to photocatalysis, sorption mechanism was uncovered based on the sorption kinetic, isotherm, thermodynamic interpretation, and of its dependence on solution pH. The results inferred that the primary sorption mechanism was through the π-π interaction between the benzene ring of clofibric acid and the organic ligand of Fe-based MOFs. Based on these results, photocatalytic mechanism could be independently or jointly assessed during the photocatalytic degradation of clofibric acid. Subsequently, the application of the Tauc method and XPS spectra revealed that the bandgap structure of Fe-based MOFs had the potential to oxidize clofibric acid by producing ROS through the electron excitation upon visible-light illumination. On top of that, the amine functionalization of Fe-based MOF altered the structural moiety that led to an additional strong acid-base interaction with clofibric acid but a decrease in the bandgap limiting the ROS production during photocatalytic activity.

Porous Coordination Polymer MOF-808 as an Effective Catalyst to Enhance Sustainable Chemical Processes

The improvement of sustainable chemical processes plays a pivotal role in safe environmental and societal development, for example, by reducing the use of hazardous substances, preventing chemical waste, and improving the efficiency of chemical reactions to obtain added-value compounds. In this context, the porous coordination polymer MOF-808 (MOF, metal-organic framework) was prepared by a straightforward method in water, at room temperature, and was unequivocally characterized by powder X-ray diffraction, vibrational spectroscopy, thermogravimetric analysis, and scanning electron microscopy. MOF-808 material was applied for the first time as catalysts in ring-opening aminolysis reactions of epoxides. It demonstrated high activity and selectivity for reactions of styrene oxide and cyclohexene oxide with aniline, using a very low amount of an eco-sustainable solvent (0.5 mL of EtOH), at 70 °C. Moreover, MOF-808 demonstrated high stability in the catalytic reaction conditions applied, and a notable reuse capacity of up to 20 consecutive reaction cycles, without significant variation in its catalytic performance. In fact, this Zr-based porous coordination polymer prepared by environment-friendly conditions proved to be a novel efficient heterogeneous catalyst, promoting the ring-opening reaction of epoxides under more sustainable conditions, and using a very low amount of catalyst.

Synthesis, characterization, and efficacy evaluation of a PH-responsive Fe-MOF@GO composite drug delivery system for the treating colorectal cancer

Luteolin is a potent anti-colorectal cancer chemical. However, its effectiveness is hindered by its poor solubility in water and fat, and it is easy to degrade by gastrointestinal enzymes. In this study, a nano-composite carrier, NH2-MIL-101(Fe)@GO (MG), based on aminated MIL-101(Fe) and graphene oxide (GO) was developed and evaluated. This carrier co-delivered luteolin and matrine, while marine was used to balance the pH for the nano-preparation. The loading capacities for luteolin and matrine were approximately 9.8% and 14.1%, respectively. Luteolin's release at pH = 5 was significantly higher than at pH = 7.4, indicating it had an acidic pH response release characteristic. Compared to MOF and GO alone, MG and NH2-MIL-101(Fe)@GO@Drugs (MGD) enhanced anti-cancer activity by inhibiting tumor cell migration, increasing ROS generation, and upregulating the expression of Caspase-3 and Caspase-9. In conclusion, this study contributes new ideas and methods to the treatment strategy of multi-component anti-colorectal cancer therapy. It also advances drug delivery systems and supports the development of more effective and targeted treatment approaches for colorectal cancer.

Insight into the Structure of MOF-Containing Hybrid Polymeric Microspheres

Polymer science exploited metal organic frameworks (MOFs) for various purposes, which is due to the fact that these materials are ideal platforms for identifying design features for advanced functional materials. The mechanism of polymerization using MOFs, is still largely unexplored and the detailed characterization of both materials in essential to understand the important interactions between the components. In this work modern advanced research methods were used to investigate the properties of MOF-containing hybrid polymeric microspheres. Hydrothermal conversion of CFA-derived iron particles was used to obtain MOF nanostructures, which were then introduced to the structure of hybrid polymer microspheres based on ethylene glycol dimethylacrylate (EGDMA) and triethoxyvinylsilane (TEVS). Chemical structures were confirmed by ATR-FTIR method. To provide information about the elemental composition of the tested materials and for the determination of chemical bonds present in the tested samples XPS method was applied. Morphology was studied using SEM microscopy, whereas porosity was investigated using ASAP technique. Swellability coefficients were determined using typical organic solvents and distilled water. Moreover, the ecological aspect concerning the use of fly ashes deserves to be emphasized.

Sonodynamic Therapy of NRP2 Monoclonal Antibody-Guided MOFs@COF Targeted Disruption of Mitochondrial and Endoplasmic Reticulum Homeostasis to Induce Autophagy-Dependent Ferroptosis

The lethality and chemotherapy resistance of pancreatic cancer necessitates the urgent development of innovative strategies to improve patient outcomes. To address this issue, we designed a novel drug delivery system named GDMCN2,which uses iron-based metal organic framework (Fe-MOF) nanocages encased in a covalent organic framework (COF) and modified with the pancreatic cancer-specific antibody, NRP2. After being targeted into tumor cells, GDMCN2 gradually release the sonosensitizer sinoporphyrin sodium (DVDMS) and chemotherapeutic gemcitabine (GEM) and simultaneously generated reactive oxygen species (ROS) under ultrasound (US) irradiation. This system can overcome gemcitabine resistance in pancreatic cancer and reduce its toxicity to non-targeted cells and tissues. In a mechanistic cascade, the release of ROS activates the mitochondrial transition pore (MPTP), leading to the release of Ca2+ and induction of endoplasmic reticulum (ER) stress. Therefore, microtubule-associated protein 1A/1B-light chain 3 (LC3) is activated, promoting lysosomal autophagy. This process also induces autophagy-dependent ferroptosis, aided by the upregulation of Nuclear Receptor Coactivator 4 (NCOA4). This mechanism increases the sensitivity of pancreatic cancer cells to chemotherapeutic drugs and increases mitochondrial and DNA damage. The findings demonstrate the potential of GDMCN2 nanocages as a new avenue for the development of cancer therapeutics.

Application of a novel composite of Fe3O4@SiO2/PAEDTC surrounded by MIL-101(Fe) for photocatalytic degradation of penicillin G under visible light

The novel photocatalyst of Fe3O4@SiO2/PAEDTC@MIL-101(Fe) was prepared based on the sol-gel method, and its structure and morphology were determined by SEM mapping, TEM, XRD, FTIR, and N2 adsorption-desorption analyses. The photocatalytic activity of nanocomposite was evaluated in comparison with other particles as well as adsorption and photolysis processes. The effect of operating parameters showed that the complete degradation of penicillin G (PNG) can be provided at a photocatalyst dosage of 0.6 g/L, radiation intensity of 36 W, pH of 5, and time of 60 min. In the optimum condition, 84% TOC removal was attained and the BOD5/COD rate for the treated effluent was above 0.4, which was representative of the high biodegradability of the treated effluent compared to the raw sample. The findings of energy consumption showed that PNG can be easily and effectively treated by the photocatalytic process based on magnetic MIL-101(Fe) with electrical energy per order between 10 and 20.87 kWh/m3. Due to the excellent interaction between the MIL-101(Fe) and Fe3O4@SiO2/PAEDTC, the photocatalyst stability test showed a recyclability of the particles for 5 consecutive reaction cycles with a minimum reduction of 7%. Solution treated with photocatalyst under UV and visible light sources explained that the toxicity of the effluent after treatment is significantly reduced with the growth of Escherichia coli. Scavenging experiments showed that •OH radical and hole (h+) are the main agents in degrading PNG to CO2, H2O, and biodegradable and low-toxicity products. Finally, the findings of the diagnostic analysis and comparative experiments proved that with the interaction of Fe3O4@SiO2, NH2, and MIL-101(Fe), a lower band gap can be prepared for more absorption of photons and pollutant and also more and faster production of active radicals.

Visible Light-Driven Metal-Organic Framework-Mediated Activation and Utilization of CO2 for the Thiocarboxylation of Olefins

Visible light-mediated photoredox catalysis has emerged to be a fascinating approach for the activation of CO₂ and its subsequent fixation into valuable chemicals utilizing renewable and inexhaustible solar energy. Although great progress has been made in CO₂ photoreduction, visible light-assisted organic synthesis using CO₂ as a reactive substrate is rarely explored. Herein, we report an efficient, facile, and economically viable photoredox-mediated approach for the synthesis of important β-thioacids via carboxylation of olefins with CO₂ and thiols over a porous functionalized metal-organic framework (MOF), Fe-MIL-101-NH₂, as a photocatalyst under ambient conditions. This multicomponent reaction offers wide substrate scope, mild reaction conditions, easy work-up, cost-effective and reusable photocatalysts, and higher product selectivity. Computational studies suggested that CO₂ interacts with the thiophenol-styrene adduct to facilitate the synthesis of β-thioacids in almost quantitative yields.

Dual-emissive EY/UiO-66-NH2 as a ratiometric probe for turn-on sensing and cell imaging of hypochlorite

Hypochlorite plays a vital role in biological systems and our daily life. The rapid and convenient detection of hypochlorite is imperative and significant for disease treatment and human health. In this work, EY/UiO-66-NH₂ (EY = eosin Y) was prepared through a hydrothermal process and could be applied to the detection and bioimaging of hypochlorite as a self-calibrating sensing nanoprobe. EY/UiO-66-NH₂ features two emissions at 432 nm and 533 nm, and the emission intensity of 533 nm is enhanced with increasing ClO^- concentration. EY/UiO-66-NH₂ could be utilized as a ratiometric fluorescence sensor of ClO^-. The linear range of EY/UiO-66-NH₂ towards ClO^- is 0.1-200 μM and its detection limit is 46.4 nM. In comparison with previously reported probes for ClO^-, EY/UiO-66-NH₂ has the advantages of a wide linear range, low detection limit, turn-on fluorescence and ratiometric response. This work provides a new method for ClO^- detection in living cells.

Synthesis, Structure, and Thermal Stability of a Mesoporous Titanium(III) Amine-Containing MOF

The first mesoporous bimetallic Ti^III/Al metal-organic framework (MOF) containing amine functionalities on its linkers has been selectively obtained by converting the cheap commercially available (TiCl₃)₃AlCl₃ into Ti_3-xAl_xCl₃(THF)₃ and reacting this complex with 2-aminoterephthalic acid in dimethylformamide (DMF) under soft solvothermal conditions. This compound is structurally related to the previously described NH₂-MIL-101(M) (M = Cr, Al, and Fe) MOFs. Thermal gravimetric analyses and in situ powder X-ray diffraction (PXRD) measurements demonstrated that this highly air-sensitive Ti^III-containing MOF is structurally stable up to 200 °C. Nuclear magnetic resonance (NMR) spectroscopy, elemental analysis, and inductively coupled plasma (ICP) revealed that NH₂-MIL-101(Ti^III) contains trinuclear Ti₃(μ₃-O)Cl(DMF)₂(RCOO)₆ clusters with strongly bound DMF molecules and a small amount of aluminum. Sorption experiments revealed a higher affinity of this MOF for hydrogen compared to the previously described monometallic unfunctionalized MIL-101(Ti^III) MOF.

A novel polydopamine-modified metal organic frameworks catalyst with enhanced catalytic performance for efficient degradation of sulfamethoxazole in wastewater

In this study, a novel polydopamine (PDA)-modified metal organic frameworks (MOFs) catalyst (MIL/PDA) was successfully fabricated to activate persulfate (PS) for the degradation of sulfamethoxazole (SMX) in wastewater. The experimental results indicated that PDA-modified catalyst exhibited superior catalytic performance and enhanced the degradation of SMX (91.5%) compared to pure MOFs. The physical-chemical properties of the MIL/PDA catalyst were comprehensively characterized, and the applications in the catalytic degradation of SMX were evaluated. It was found that the modification of PDA enhanced the electron transfer, while promoting the redox cycle of Fe(III)/Fe(II), which in turn boosted the production of active oxygen species. Furthermore, MIL/PDA showed high stability and reusable performance over multiple cycles. Both radical and non-radical pathways were jointly involved in the activation process of PS were confirmed by quenching experiments combined with electron paramagnetic resonance (EPR). Based on this, the possible mechanism of the catalytic reaction was investigated. Finally, five degradation pathways of SMX degradation were proposed according to the results of liquid chromatography-mass spectrometry (LC-MS). This work provided a new insight into the design of novel and efficient heterogeneous catalysts for advanced wastewater treatment.

Cerium-doped MIL-101-NH2(Fe) as superior adsorbent for simultaneous capture of phosphate and As(V) from Yangzonghai coastal spring water

A series of novel cerium-doped MIL-101-NH₂ materials were synthesized using the solvothermal method for the simultaneous efficient removal of phosphate and As(V). According to the characterization results, cerium was successfully loaded onto MIL-101-NH₂ and that Ce-MOFs might be generated during the loading process, which modified the crystal structure of MIL-101-NH₂ and resulted in MOFs with different microstructures. In single-uptake systems containing only phosphate or As(V), isothermal adsorption experiments showed that 1Ce-MIL-101-NH₂ exhibited better adsorption properties of phosphate and As(V) than MIL-101-NH₂. Furthermore, the uptake amounts of phosphate and As(V) reached 341.5 mg/g and 249 mg/g, respectively. Superior uptake amounts for binary phosphate (167.36 mg/g) and As(V) (87.55 mg/g) were achieved with 1Ce-MIL-101-NH₂. Kinetic experiments revealed a higher uptake rate of phosphate than of As(V). FT-IR and XPS analyses showed that the main mechanism for the removal of phosphate and As(V) from water by 1Ce-MIL-101-NH₂ was the formation of an Fe/CeOP inner complex through ligand complexation and electrostatic attraction. Furthermore, 1Ce-MIL-101-NH₂ exhibited high selectivity and excellent efficiency in removing phosphate and As(V) in contaminated spring water in the presence of competing anions; this further confirms the application potential of the novel adsorbent.

Graphitic carbon nitride/NH2-MIL-101(Fe) composite for environmental remediation: Visible-light-assisted photocatalytic degradation of acetaminophen and reduction of hexavalent chromium

Herein, an efficient photocatalyst composed of graphitic carbon nitrate and iron-based metal-organic framework (g-C₃N₄/NH₂-MIL-101(Fe)) composite was fabricated by a solvothermal method for the degradation of acetaminophen (AAP) and reduction of Cr(VI) under sunlight illumination. The composite was confirmed by X-ray diffraction. UV-visible spectra showed that the bare g-C₃N₄, pure Fe-MOF, and composite harvest solar light effectively. The photocatalytic experiment indicated that the composite exhibited superior reduction efficiency of Cr(VI) (66%) compared to the bare g-C₃N₄ (35%) and pure Fe-MOF (51%) at pH 7. As the pH decreases from 9 to 2, the reduction efficiency increased. The highest Cr(VI) reduction (91%) was observed at pH 2. On the other hand, the catalyst degraded 94% of AAP at pH 7 compared to the bare g-C₃N₄ (42%) and pure Fe-MOF (60%) in the presence of hydrogen peroxide. A radical scavenger experiment endorsed that the generation of superoxide radicals was the main reason for the AAP degradation. The cyclic stability test indicated that there was no substantial decrease in the degradation efficiency of AAP after ten repeated cycles. The kinetic studies showed that the photodegradation of AAP and reduction Cr(VI) was well-fitted to the first-order kinetics. Gas chromatography-mass spectrometry analysis showed that hydroquinone, aliphatic carboxylic acids, monohydroxy, and dihydroxy paracetamol were the main products formed as a result of such degradation process. Therefore, the iron-based MOF and their composites can be used as effective photocatalysts for pollutants degradation.

Enhancement of aqueous stability of NH2-MIL-101(Fe) by hydrophobic grafting post-synthetic modification

The development of water-stable metal-organic frameworks is a critical issue for their photocatalysis applications in water treatment. A phenyl-ethyl side chain with low surface energy was grafted into NH₂-MIL-101(Fe) through a post-synthetic modification (PSM) method. As a result, a novel MIL-101(Fe)-1-(4-(ethyl)phenyl)urea (named MIL-101(Fe)-EPU) was synthesized. Basic morphology, crystal structure, and chemical bond features of MIL-101(Fe)-EPU were retained after PSM. Nitrogen X-ray photoelectron spectroscopy analysis confirmed the successful introduction of the phenyl-ethyl side chain, and this transformation increased its hydrophobicity and water stability. Contact angles of MIL-101(Fe)-EPU to water raised from 59.6 to 140.4°. And its structure maintained intact after 72 h water exposure, indicating higher stability than parent NH₂-MIL-101(Fe). In the photocatalysis reaction with visible light and oxidant donor (H₂O₂), MIL-101(Fe)-EPU demonstrated a degradation efficiency of tetrabromobisphenol A with a reaction rate at 0.0313 min^-1. The predominant reaction mechanism was OH·oxidation. The acid condition was beneficial for this photocatalysis reaction and high stability was observed. Besides, photocatalysis efficiency, crystal structure, and chemical structures were all retained in different actual water mediums, suggesting high adaptability of MIL-101(Fe)-EPU. In general, hydrophobic group grafting using a PSM method endows MIL-101(Fe)-EPU the potentiality as photocatalyst for organic contaminant elimination from water.

Preparation of GO/MIL-101(Fe,Cu) composite and its adsorption mechanisms for phosphate in aqueous solution

In this study, MIL-101(Fe), MIL-101(Fe,Cu), and graphene oxide (GO)/MIL-101(Fe,Cu) were synthesized to compose a novel sorbent. The adsorption properties of these three MOF-based composites were compared toward the removal of phosphate. Furthermore, the influencing factors including adsorption time, pH, temperature, and initial concentration on the adsorption capacity of phosphate on these materials as well as the reusability of the material were discussed. The structure of fabricated materials and the removal mechanism of phosphate on the composite material were analyzed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption-desorption analysis, and zeta potential. The results show that the maximum adsorption capacity of phosphate by the composite GO/MIL-101(Fe,Cu)-2% was 204.60 mg·g^-1, which is higher than that of MIL-101(Fe,Cu) and MIL-101(Fe). likewise the specific surface area of GO/MIL-101(Fe,Cu)-2% is 778.11 m²/g is higher than that of MIL-101(Fe,Cuand MIL-101(Fe),which are 747.75 and 510.66 m²/g, respectively. The adsorption mechanism of phosphate is electrostatic attraction, forming coordination bonds and hydrogen bonds. The fabricated material is a promising adsorbent for the removal of phosphate with good reusability.

Metal-Organic Framework-Based Nanoagents for Effective Tumor Therapy by Dual Dynamics-Amplified Oxidative Stress

Overproduction of reactive oxygen species (ROS) within tumors can cause oxidative stress on tumor cells to induce death, which has motivated us to develop ROS-mediated tumor therapies, such as typical photodynamic therapy (PDT) and Fenton reaction-mediated chemodynamic therapy (CDT). However, these therapeutic modalities suffer from compromised treatment efficacy owing to their limited generation of highly reactive ROS in a tumor microenvironment (TME). In this work, a nanoscale iron-based metal-organic framework, MIL-101(Fe), is synthesized as a Fenton nanocatalyst to perform the catalytic conversion of hydroxyl radicals (·OH) from hydrogen peroxide (H₂O₂) under the acidic environment and as a biocompatible and biodegradable nanocarrier to deliver a 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin (TCPP) photosensitizer for light-activated singlet oxygen (¹O₂) generation. By coupling such chemodynamic/photodynamic effects, the photosensitizer-integrated nanoagents (MIL-101(Fe)@TCPP) could enable more ROS production within tumors to induce amplified oxidative damage for tumor-specific synergistic therapy. In vitro results show that MIL-101(Fe)@TCPP nanoagents achieve the acid-responsive CDT and effective PDT, and synergistic CDT/PDT provides an enhanced therapeutic effect. Ultimately, based on such synergistic therapy, MIL-101(Fe)@TCPP nanoagents cause a significant tumor growth inhibition in vivo without severe side effects, showing great potential for anti-tumor application.

Tuning water adsorption, stability, and phase in Fe-MIL-101 and Fe-MIL-88 analogs with amide functionalization

Metal-organic frameworks (MOFs) of the MIL series of materials have been widely studied as a result of their high tunability and the diversity of structure types that exist for these typically M³⁺ containing frameworks. We explored the use of amide-functionalized ligands in the synthesis of Fe-MIL-101 as a means to tune the water stability and water vapor adsorption in this important class of frameworks. We further show that slow leaching of Fe from NdFeB magnets can afford MIL-101 or MIL-88 under various conditions where the phase of the framework is controlled by length of the carbon chains on amide substituents. NdFeB can also be used to prepare these materials at room temperature in the absence of additional metal salts.

Sensitive detection of prostate-specific antigen based on dual signal amplification of Fc@MgAl-LDH and NH2-MIL-101(Fe)

An electrochemiluminescence sensor was proposed for detection of prostate-specific antigen (PSA) based on dual-amplification strategy of ferrocenecarboxylic acid@MgAl layered double hydroxides (Fc@MgAl-LDH) and NH₂-MIL-101(Fe). An (Au NPs/Fc@MgAl-LDH)_n multilayer nanofilm was fabricated by a layer-by-layer self-assembly between positively charged Fc@MgAl-LDH nanosheets and negatively charged Au NPs. The multilayer nanofilms acted as nanocarriers for antibody loading and enhancers to catalyze H₂O₂ decomposition. NH₂-MIL-101(Fe) promoted the production of reactive oxygen species due to peroxidase-mimicking activity and increased immobilization of antibodies. This sensor showed a linear detection range of 0.05 pg mL^-1 to 50 ng mL^-1 with a low detection limit of 0.034 pg mL^-1. Moreover, the detection results from this sensor were consistent with data collected from a commercial immunoassay analyzer. The sensor had significant potential for PSA detection in clinical diagnostics.

A rational design of g-C3N4-based ternary composite for highly efficient H2 generation and 2,4-DCP degradation

In this work, g-C₃N₄ based ternary composite (CeO₂/CN/NH₂-MIL-101(Fe)) has been fabricated via hydrothermal and wet-chemical methods. The composite showed superior photoactivities for H₂O reduction to produce H₂ and 2,4-dichlorophenol (2,4-DCP) degradation. The amount of H₂ evolved over the composite under visible and UV-visible irradiations is 147.4 µmol·g^-1·h^-1 and 556.2 µmol·g^-1·h^-1, respectively. Further, the photocatalyst degraded 87% of 2,4-DCP in 2 hrs under visible light irradiations. The improved photoactivities are accredited to the synergistic-effects caused by the proper band alignment with close interfacial contact of the three components that significantly promoted charge transfer and separation. The 2,4-DCP degradation over the composite is dominated by OH radical rather than h⁺ and O₂^- as investigated by scavenger trapping experiments. This is further supported by the electron para-magnetic resonance (EPR) study. This work provides new directions for the development of g-C₃N₄ based highly efficient ternary composite materials for clean energy generation and pollution control.

Experimental investigations into the irregular synthesis of iron(iii) terephthalate metal-organic frameworks MOF-235 and MIL-101

MOF-235(Fe) and MIL-101(Fe) are two well-studied metal-organic frameworks (MOFs) with dissimilar crystal structures and topologies. Previously reported syntheses of the former show that it has greatly varying surface areas, indicating a lack of phase purity of the products, i.e. the possible presence of both MOFs in the same sample. To find the reason for this, we have tested and modified the commonly used synthesis protocol of MOF-235(Fe), where a 3 : 5 molar ratio of iron(iii) ions and a terephthalic acid linker is heated in a 1 : 1 DMF : ethanol solvent at 80 °C for 24 h. Using XRD and BET surface area (SA_BET) measurements, we found that it is difficult to obtain a pure phase of MOF-235, as MIL-101 also appears to form during the solvothermal treatment. Comparison of the XRD peak height ratios of the synthesis products revealed a direct correlation between the MOF-235/MIL-101 content and surface area; more MOF-235 yields a lower surface area and vice versa. In general, using a larger (3 : 1) DMF : ethanol ratio than that reported in the literature and a stoichiometric (4 : 3) Fe(iii) : TPA ratio yields a nearly pure MOF-235 product (SA_BET = 295 m² g^-1, 67% yield). An optimized synthesis procedure was developed to obtain high-surface area MIL-101(Fe) (SA_BET > 2400 m² g^-1) in a large yield and at a previously unreported temperature (80 °C vs. previously used 110-150 °C). In situ X-ray scattering was utilized to investigate the crystallization of MOF-235 and MIL-101. At 80 °C, only MOF-235 formed and at 85 and 90 °C, only MIL-101 formed.

Preparation of a GO/MIL-101(Fe) Composite for the Removal of Methyl Orange from Aqueous Solution

The composite material graphene oxide (GO)/MIL-101(Fe) was prepared by a simple one-pot reaction method. MIL-101(Fe) grown on the surface of a GO layer was confirmed by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The adsorption performance and the mechanism of MIL-101(Fe) and GO/MIL-101(Fe) for methyl orange (MO) were studied. The results have shown that the adsorption capacity of GO/MIL-101(Fe) for MO was significantly better than that of MIL-101(Fe), and its capacity was the highest when 10% GO was added. The Langmuir specific surface areas of MIL-101(Fe) and GO/MIL-101(Fe) were 1003.47 and 888.289 m²·g^-1, respectively. The maximum adsorption capacities of MO on MIL-101 (Fe) and 10% GO/MIL-101 (Fe) were 117.74 and 186.20 mg·g^-1, respectively. The adsorption isotherms were described by the Langmuir model, and the adsorption kinetic data suggested the pseudo-second order to be the best fit model. GO/MIL-101(Fe) can be reused at least three times.

A green synthesized recyclable ZnO/MIL-101(Fe) for Rhodamine B dye removal via adsorption and photo-degradation under UV and visible light irradiation

Metal-organic frameworks (MOFs) have recently debuted as participants and solid supports in catalysts for environmental application in water treatment. Visible light active nanocomposites; ZnO/MIL-101(Fe); were synthesized via a hydrothermal method by loading ZnO; prepared by a green method; on a porous MIL-101(Fe) to be used as a heterogeneous catalyst for Rhodamine B dye (RhB) degradation as a model pollutant. The effect of adding acetic acid during the preparation of MIL-101(Fe) was studied; [A] used for the samples prepared by acetic acid. The prepared catalysts were characterized by XPS, XRD, zeta potential, TGA, FTIR, N₂ adsorption-desorption measurements, SEM, EDX, elemental mapping, TEM, and UV-VIS diffuse reflectance spectroscopy. The loading of ZnO on MIL-101(Fe) decreased the band gap from 3.2 eV for ZnO to be 2.85 eV for ZnO/MIL-101(Fe)[A], this low band gap explaining the obtained high activity under visible light irradiation. The mechanism of the photocatalytic degradation of RhB was investigated by introducing different scavengers to compete for the possible reactive species involved in the degradation process. The trapping experiments indicated that h⁺ and ^•OH have a vital role in the RhB degradation. The reusability of MIL-101(Fe) was also investigated after three runs. Thus, the synthesized ZnO/MIL-101(Fe)[A] could be used as an alternative catalyst for the photocatalytic degradation of coloured wastewater as it can successfully degrade 97.1% of Rhodamine B (10 mg/L) with high reaction rate (k = 0.0339 min^-1) under visible light irradiation for 300 min using 0.5 g/L of the catalyst. The as-prepared ZnO/MIL-101(Fe) and ZnO/MIL-101(Fe)[A] have competitive photocatalytic dye degradation activity.

Isotherm, kinetic, and thermodynamic studies for dynamic adsorption of toluene in gas phase onto porous Fe-MIL-101/OAC composite

In the present paper, micro-mesoporous Fe-MIL-101/OAC composite using in situ incorporation of Fe-MIL-101 into oxidized activated carbon was synthesized and characterized by XRD, FT-IR, SEM, EDS, and BET techniques. The adsorption performances of toluene onto adsorbents in the gas phase were studied using a laboratory-scale dynamic adsorption system under moist ambience. The toluene adsorption capacity of Fe-MIL-101/OAC composite and Fe-MIL-101 were 127 and 97.6 mg g^-1, severally. Results revealed that the larger pores in micro-mesoporous Fe-MIL-101/OAC enhanced the molecular diffusion rate. The findings indicated that micro-mesoporous structures played key roles in the capture of toluene molecules. The initial toluene concentration positively affected on toluene adsorption capacity while temperature and humidity negatively affected on toluene adsorption capacity. The Langmuir model and the pseudo-second-order kinetics model described better adsorption process of Fe-MIL-101/OAC composite. Thermodynamic findings determined that toluene adsorption over Fe-MIL-101/OAC was spontaneous, exothermic physisorption. The regeneration of the composite was still up to 72.6% after six cycles. The micro-mesoporous Fe-MIL-101/OAC composite proposes a promising support for the high toluene removal for future. Graphical abstract.

The obvious advantage of amino-functionalized metal-organic frameworks: As a persulfate activator for bisphenol F degradation

In this study, two iron-based metal-organic framework compounds (MOFs), were used and compared as catalysts for persulfate (PS) activation to degrade bisphenol F (BPF). The outstanding advantage of using amino-functionalized MOFs in the catalytic system was verified under different reaction conditions, and the mechanism was explored. The results indicated that NH₂-MIL-101(Fe)/PS system not only had a wide pH application range, but also possessed an excellent catalytic performance towards interference from the coexisting anions and humic acid. Density functional theory (DFT) calculations showed that, compared with MIL-101(Fe), the -NH₂ modification could significantly improve the electronic conductivity of NH₂-MIL-101(Fe) by enhancing its Fermi level (-4.28 eV) and binding energy to PS (-1.19 eV). The free radical quenching experiments were combined with electron paramagnetic resonance (EPR) confirmed that free radicals (SO₄^-, OH, O₂^-) worked together with the non-radical (¹O₂) reaction to remove 91% BPF within 40 min in the NH₂-MIL-101(Fe)/PS system. The two proposed BPF degradation pathway were related to hydroxylation, oxidation and ring cracking. The toxicity of the BPF degradation intermediates as well as its final products were also evaluated.

Biodegradable MRI Visible Drug Eluting Stent Reinforced by Metal Organic Frameworks

Metal-organic frameworks (MOFs) have applications in numerous fields. However, the development of MOF-based "theranostic" macroscale devices is not achieved. Here, heparin-coated biocompatible MOF/poly(ε-caprolactone) (PCL) "theranostic" stents are developed, where NH₂ -Materials of Institute Lavoisier (MIL)-101(Fe) encapsulates and releases rapamycin (an immunosuppressive drug). These stents also act as a remarkable source of contrast in ex vivo magnetic resonance imaging (MRI) compared to the invisible polymeric stent. The in vitro release patterns of heparin and rapamycin respectively can ensure a type of programmed model to prevent blood coagulation immediately after stent placement in the artery and stenosis over a longer term. Due to the presence of hydrolysable functionalities in MOFs, the stents are shown to be highly biodegradable in degradation tests under various conditions. Furthermore, there is no compromise of mechanical strength or flexibility with MOF compositing. The system described here promises many biomedical applications in macroscale theranostic devices. The use of MOF@PCL can render a medical device MRI-visible while simultaneously acting as a carrier for therapeutic agents.

From Discrete Complexes to Metal-Organic Layered Materials: Remarkable Hydrogen Bonding Frameworks

A series of metal-organic coordination complexes based on alkaline-earth metal centers [Mg(II), Ca(II), and Ba(II)] and the ligand 5-aminoisophthalate (aip2-) revealed notable structural diversity, both in the materials' dimensionality and in their hydrogen bonding networks: [Mg(H2O)6]∙[Mg2(Haip)(H2O)10]∙(Haip)∙3(aip)∙10(H2O) (1) and [Mg(aip)(phen)(H2O)2]∙(H2O) (2) were isolated as discrete complexes (0D); [Ca(aip)(H2O)2]∙(H2O) (3), [Ca(aip)(phen)(H2O)2]∙(phen)∙(H2O) (4), and [Ba2(aip)2(phen)2(H2O)7]∙2(phen)∙2(H2O) (5) revealed metal-organic chain (1D) structures, while the [Ba(aip)(H2O)] (6) showed a metal-organic layered (2D) arrangement. Furthermore, most of these metal-organic coordination materials revealed interesting thermal stability properties, being stable at temperatures up to 450 °C.

A cascade-reaction enabled synergistic cancer starvation/ROS-mediated/chemo-therapy with an enzyme modified Fe-based MOF

Synergistic cancer starvation/ROS-mediated/chemo-therapy is developed through a cascade reaction with enzyme glucose oxidase (GOX) modified on the surface of an Fe-based metal organic framework (MOF(Fe)) and drug camptothecin (CPT) loaded into the cavities of MOF(Fe). Once internalized by tumor cells, GOX catalyzes endogenous glucose into hydrogen peroxide (H2O2) and gluconic acid (H+) enabling starvation therapy through choking off energy (glucose) supply. Meanwhile, the acidic micro-environment of tumor enhanced by the generated H+ degrades the MOF(Fe) simultaneously releasing CPT for chemotherapy and Fe3+, catalyzing H2O2 into one of the strongest reactive oxygen species (ROS) ˙OH enabling ROS-mediated therapy. Both in vitro and in vivo results show remarkable tri-modal synergistic anticancer effects. This work may shed some light on the development of novel multi-modal cancer therapies without any external intervention.

Rapid and selective adsorption of a typical aromatic organophosphorus flame retardant on MIL-101-based metal–organic frameworks

Rapid and selective adsorption of TPhP on Cr-MIL-101.

Influence of UiO-66(Zr) Preparation Strategies in Its Catalytic Efficiency for Desulfurization Process

Porous metal-organic framework (MOF) materials UiO-66(Zr) obtained by solvothermal and microwave advanced synthesis (MWAS) procedures were characterized, and their catalytic efficiency was investigated for oxidative desulfurization (ODS) processes using a multicomponent model diesel containing benzothiophene and dibenzothiophene derivatives. The preparation parameters as the cooling time after oven use in the solvothermal procedure, and also the reaction time in the MWAS method seemed to play an important role in the catalytic performance of the UiO-66(Zr) material, as well as in its recycle capacity. The material prepared by the solvothermal procedure with a fast cooling time showed the best catalytic performance (desulfurization efficiency of 99.5% after 3 h). However, the application of the UiO-66(Zr) material prepared by the MWAS method (desulfurization efficiency of 96% after 3 h) conciliated a higher number of advantages, such as shorter reaction time preparation (15 min) and high catalytic activity for a higher number of reaction cycles. The UiO-66(Zr) prepared by the MWAS method was used for the first time in an oxidative desulfurization process, and according to the catalytic results obtained (high recycle capacity and stability) and shorter reaction time preparation, seems to be a promising material for industrial application.