Advances of metal–organic frameworks for gas sensing

Multipressure Sampling for Improving the Performance of MOF-based Electronic Noses

Metal-organic frameworks (MOFs) are a promising class of porous materials for the design of gas sensing arrays, which are often called electronic noses. Due to their chemical and structural tunability, MOFs are a highly diverse class of materials that align well with the similarly diverse class of volatile organic compounds (VOCs) of interest in many gas detection applications. In principle, by choosing the right combination of cross-sensitive MOFs, layered on appropriate signal transducers, one can design an array that yields detailed information about the composition of a complex gas mixture. However, despite the vast number of MOFs from which one can choose, gas sensing arrays that rely too heavily on distinct chemistries can be impractical from the cost and complexity perspective. On the other hand, it is difficult for small arrays to have the desired selectivity and sensitivity for challenging sensing applications, such as detecting weakly adsorbing gases with weak signals, or conversely, strongly adsorbing gases that readily saturate MOF pores. In this work, we employed gas adsorption simulations to explore the use of a variable pressure sensing array as a means of improving both sensitivity and selectivity as well as increasing the information content provided by each array. We studied nine different MOFs (HKUST-1, IRMOF-1, MgMOF-74, MOF-177, MOF-801, NU-100, NU-125, UiO-66, and ZIF-8) and four different gas mixtures, each containing nitrogen, oxygen, carbon dioxide, and exactly one of the hydrogen, methane, hydrogen sulfide, or benzene. We found that by lowering the pressure, we can limit the saturation of MOFs, and by raising the pressure, we can concentrate weakly adsorbing gases, in both cases, improving gas detection with the resulting arrays. In many cases, changing the system pressure yielded a better improvement in performance (as measured by the Kullback-Liebler divergence of gas composition probability distributions) than including additional MOFs. We thus demonstrated and quantified how sensing at multiple pressures can increase information content and cross-sensitivity in MOF-based arrays while limiting the number of unique materials needed in the device.

An iron metal-organic framework-based electrochemical sensor for identification of Bisphenol-A in groundwater samples

Bisphenol A (BPA) is an endocrine disruptor that leaches into food and is significantly employed in food and beverage storage, and source water cycles. To ensure an outstanding and sustainable biosphere while safeguarding human health and well-being, BPA detection is essential, necessitating an efficient detection methodology. Here, we describe an easy-to-use, inexpensive, and overly sensitive electrochemical detector that uses Fe-MOF nanotextures for identifying BPA in groundwater. This sensing electrode device combines the excellent guest interaction potential of organic ligands with the substantial surface area of metal. Using various analytical techniques including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and powder X-ray diffraction (XRD), the structural and physicochemical behaviors of the as-synthesized material were evaluated. Electrochemical BPA detection was enabled by a diffusion-controlled oxidation procedure with a comparable number of both protons and electrons. With a 0.1 μM detection limit, the sensor displayed a linear sensitivity of around 0.1 μM and 15 μM. Additionally, the sensors demonstrated an outstanding recovery with actual water samples as well as a repeatable and steady performance over the course of a month exhibiting minimal interference from typical inorganic and organic species. Due to its notable sensitivity, inexpensive cost, robust selectivity, excellent repeatability, and reuse ability, the electroanalytical possibilities of the Fe-MOF-modified GCE suggest that the device can be implemented into real-world applications in its primed condition.

Capture Fluorocarbon and Chlorofluorocarbon from Air Using DUT-67 for Safety and Semi-Quantitative Analysis

Fluoro- and chlorofluorocabons (FC/CFCs) are important refrigerants, solvents, and fluoropolymers in industry while being toxic and carrying high global warming potential. Detection and reclamation of FC/CFCs based on adsorption technology with highly selective adsorbents is important to labor safety and environmental protection. Herein, the study reports an integrated method to combine capture, separation, enrichment, and analysis of representative FC/CFCs (chlorodifluoromethane(R22) and 1,1,1,2-tetrafluoroethane (R134a)) by using the highly stable and porous Zr-MOF, DUT-67. Gas adsorption and breakthrough experiments demonstrate that DUT-67 has high R22/R134a uptake (124/116 cm3 g-1) and excellent R22/R134a/CO2 separation performance (IAST selectivities of R22/CO2 and R134a/CO2 ranging from 51.4 to 33.3, and 31.1 to 25.8), even in rather low concentration and humid conditions. A semi-quantitative analysis protocol is set up to analyze the low concentrations of R22/R134a based on the high selective R22/R134a adsorption ability, fast adsorption kinetics, water-resistant utility, facile regeneration, and excellent recyclability of DUT-67. In situ single-crystal X-ray diffraction, theoretical calculations, and in situ diffuse reflectance infrared Fourier transform spectra have been employed to understand the adsorption mechanism. This work may provide a potential adsorbent for purge and trap technique under room temperature, thus promoting the application of MOFs for VOCs sampling and quantitative analysis.

Synergistic C-TiO2/ZIF-8 type II heterojunction photocatalyst for enhanced photocatalytic degradation of methylene blue

Zinc imidazolate framework (ZIF-8) and titanium dioxide (TiO₂) have been extensively studied as photocatalysts and have shown remarkable potential. In this study, we report the synthesis of a type II heterojunction photocatalyst based on carbon-doped TiO₂ (C-TiO₂) and ZIF-8 as a potentially improved material for solar light-harvested methylene blue (MB) degradation. Pure ZIF-8 has a wide band gap of 4.9 eV, due to which the application of this material to visible light-assisted photocatalytic performance is a challenging task. Therefore, C-TiO₂ has been chosen as a composite material with ZIF-8 owing to its narrow band gap compared to TiO₂. This enables the free radical-initiated photocatalytic reaction to shift into the visible region instead of the ultraviolet region. To construct the C-TiO₂/ZIF-8 heterostructure, the zinc-based ZIF matrix has been built upon the exterior of C-TiO₂ nanoparticles. UV-Vis diffuse reflectance spectroscopy (UV-Vis-DRS) corroborated the decrease in the band gap of ZIF-8 after the fabrication of C-TiO₂/ZIF-8, while X-ray diffraction (XRD) analysis demonstrated a decrease in average d-spacing and average crystallite size of the synthesized photocatalyst. Raman spectra and X-ray photoelectron spectroscopy (XPS) analysis of the synthesized samples were also performed to further understand their chemical structure and elemental content. Ultraviolet photoelectron spectroscopy (UPS) and high-resolution transmission electron microscopy (HRTEM) analyses were performed to understand the valence band (VB) states and the morphology of C-TiO₂/ZIF-8. The comparison between pure ZIF-8 and C-TiO₂/ZIF-8 in the photocatalytic degradation of MB under visible light has also been drawn. A possible charge-transfer mechanism for the same has also been proposed. It is concluded that the synergistic effect of C-TiO₂ and ZIF-8 in C-TiO₂/ZIF-8 produces an effective material for photocatalytic dye degradation.

AAO-Assisted Nanoporous Platinum Films for Hydrogen Sensor Application

The effects of the porosity and the thickness on the ability of hydrogen sensing is demonstrated through a comparison of compact and nanoporous platinum film sensors. The synthesis of anodic aluminum oxide (AAO) nanotubes with an average pore diameter of less than 100 nm served as the template for the fabrication of nanoporous Pt films using an anodization method. This was achieved by applying a voltage of 40 V in 0.4 M of a phosphoric acid solution at 20 °C. To compare the film and nanoporous Pt, layers of approximately 3 nm and 20 nm were coated on both glass substrates and AAO templates using a sputtering technique. FESEM images monitored the formation of nanoporosity by observing the Pt layers covering the upper edges of the AAO nanotubes. Despite their low thickness and the poor long-range order, the EDX and XRD measurements confirmed and uncovered the crystalline properties of the Pt films by comparing the bare and the Pt deposited AAO templates. The nanoporous Pt and Pt thin film sensors were tested in the hydrogen concentration range between 10–50,000 ppm H2 at room temperature, 50 °C, 100 °C and 150 °C. The results reveal that nanoporous Pt performed higher sensitivity than the Pt thin film and the surface scattering phenomenon can express the hydrogen sensing mechanism of the Pt sensors.

Improving Anti-Humidity Property of a SnO2-Based Chemiresistive Hydrogen Sensor by a Breathable and Hydrophobic Fluoropolymer Coating

Metal-oxide-based chemiresistive hydrogen sensors exhibit high sensitivity, long-term stability, and low cost and have been extensively applied in safety monitoring of H₂. However, the sensing performances are dramatically affected by the water vapor, resulting in reduced response value and increased response/recovery time. To improve the anti-humidity property of sensors, coating the breathable and hydrophobic membrane on the surface of the sensing film is an effective strategy. In this work, the poly[4,5-difluoro-2,2-bis(trifluoromethyl)-1,3-dioxole-co-tetrafluoroethylene] (Teflon AF-2400) was dip-coated on the surface of SnO₂ in a commercial hydrogen sensor (TGS2615) as a breathable and hydrophobic membrane. For safety, He instead of H₂ was used to test the gas permeability of membranes. The Teflon membrane shows a high He permeability of up to 40,700 Barrer and an excellent He/H₂O selectivity of 99. Moreover, Teflon shows high processability to form a defect-free coating on the rough surface of the sensing film and high chemical stability under the operando condition of the sensor. Thus, the Teflon-modified sensor possesses excellent selectivity with a value of 5, and the resistance is stable at 10,554 ± 3% Ω for 20 days in 80% RH. The modified sensor shows an improved anti-humidity property with a 75% response to 200 ppm H₂ at 80% RH and has a low coefficient of variation value of 7.23% that shows advances than other reported sensors modified by coatings. The commercially available Teflon and the simple coating technology make the strategy easily scale up and show promising applications.

Towards multi-molecular surface-enhanced infrared absorption using metal plasmonics

Surface-enhanced infrared absorption (SEIRA) leads to a largely improved detection of polar molecules, compared to standard infrared absorption. The enhancement principle is based on localized surface plasmon resonances of the substrate, which match the frequency of molecular vibrations in the analyte of interest. Therefore, in practical terms, the SEIRA sensor needs to be tailored to each specific analyte. We review SEIRA sensors based on metal plasmonics for the detection of biomolecules such as DNA, proteins, and lipids. We further focus this review on chemical SEIRA sensors, with potential applications in quality control, as well as on the improvement in sensor geometry that led to the development of multiresonant SEIRA substrates as sensors for multiple analytes. Finally, we give an introduction into the integration of SEIRA sensors with surface-enhanced Raman scattering (SERS).

Novel Approach for Detecting Vapors of Acids and Bases with Proton-Transfer Luminescent Dyes Encapsulated within Metal-Organic Frameworks

Luminescent metal-organic frameworks (LMOFs) are one of the most promising materials for being implemented as active layers in the fabrication of photonic devices such as luminescent sensors of harmful chemicals. It is highly desirable that these materials undergo quantifiable spectroscopic (absorption or emission) changes in the presence of vapors of those analytes, as in many industrial processes, these toxic compounds are in the gas phase. Although great progresses have been achieved in the field, in most of the examples reported hitherto, the detection of chemicals by LMOFs is attained in solution. Herein, we present a novel approach consisting of the encapsulation of proton transfer dyes (8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt, HPTS, and 3-hydroxyflavone, 3-HF) within the pores of two distinct MOFs. The trapped proton transfer dyes (PT-dyes) may exist as different structures (enol, anion, or zwitterion), each of these exhibiting unique optical properties. Indeed, our findings reveal that the dyes can be encapsulated as anionic or enol species. Remarkably, the PT-dye@MOF composites exhibit a high luminescence quantum yield (up to 30%), which is sensitive (showing shifting in the emission wavelengths with a concomitant quenching/enhancement of the intensity) in the presence of vapors of an acid (HCl) and a base (triethylamine). These results open a novel avenue for the development of smarter vapoluminescent MOF-based materials.

Materials for Chemical Sensing: A Comprehensive Review on the Recent Advances and Outlook Using Ionic Liquids, Metal–Organic Frameworks (MOFs), and MOF-Based Composites

The ability to measure and monitor the concentration of specific chemical and/or gaseous species (i.e., “analytes”) is the main requirement in many fields, including industrial processes, medical applications, and workplace safety management. As a consequence, several kinds of sensors have been developed in the modern era according to some practical guidelines that regard the characteristics of the active (sensing) materials on which the sensor devices are based. These characteristics include the cost-effectiveness of the materials’ manufacturing, the sensitivity to analytes, the material stability, and the possibility of exploiting them for low-cost and portable devices. Consequently, many gas sensors employ well-defined transduction methods, the most popular being the oxidation (or reduction) of the analyte in an electrochemical reactor, optical techniques, and chemiresistive responses to gas adsorption. In recent years, many of the efforts devoted to improving these methods have been directed towards the use of certain classes of specific materials. In particular, ionic liquids have been employed as electrolytes of exceptional properties for the preparation of amperometric gas sensors, while metal–organic frameworks (MOFs) are used as highly porous and reactive materials which can be employed, in pure form or as a component of MOF-based functional composites, as active materials of chemiresistive or optical sensors. Here, we report on the most recent developments relative to the use of these classes of materials in chemical sensing. We discuss the main features of these materials and the reasons why they are considered interesting in the field of chemical sensors. Subsequently, we review some of the technological and scientific results published in the span of the last six years that we consider among the most interesting and useful ones for expanding the awareness on future trends in chemical sensing. Finally, we discuss the prospects for the use of these materials and the factors involved in their possible use for new generations of sensor devices.

Combining Theory and Experiments To Study the Influence of Gas Sorption on the Conductivity Properties of Metal-Organic Frameworks

With a view on adding to their use in trace gas sensing, we perform a combined experimental and theoretical study of the change of the conductivity of a metal organic framework (iron (1,2,3)-triazolate, Fe(ta)2) with the uptake of chemically inert gases. To align our first-principles calculations with experimental measurements, we perform an ensemble average over different microscopic arrangements of the gas molecules in the pores of the metal-organic framework (MOF). Up to the experimentally reachable limit of gas uptake, we find a good agreement between both approaches. Thus, we can employ theory to further interpret our experimental results in terms of changes to the parameters of the Bardeen-Shockley band theory, electron-phonon coupling (in the form of the deformation potential), bulk modulus, and carrier effective mass. We find the first of these to be most strongly influenced through the gas uptake. Furthermore, we find the changes to the deformation potential to strongly depend on the individual microscopic arrangements of molecules in the pores of the MOF. This hints at a possible synthetic engineering of the material, e.g., by closing off certain pores, for a stronger, more interpretable electric response upon gas sorption.

Nanomaterials for the Treatment of Heavy Metal Contaminated Water

Nanotechnology finds its application almost in every field of science and technology. At the same time, it also helps to find the solution to various environment-related problems, especially water contamination. Nanomaterials have many advantages over conventional materials, such as high surface area, both polar and non-polar chemistries, controlled and size-tunable, easier biodegradation, which made them ideal candidates for water and environmental remediation as well. Herein, applications of non-carbon nanomaterials, such as layered double hydroxides, iron oxide magnetite nanoparticles, nano-polymer composites, metal oxide nanomaterials and nanomembranes/fibers in heavy metal contaminated water and environmental remediation are reviewed. These non-carbon nanomaterials, due to their tunable unique chemistry and small size have greater potentials for water and environmental remediation applications.

Vibrational spectroscopy investigation of defects in Zr- and Hf-UiO-66

Missing cluster defects in Hf-UiO-66 cause a redshift of a distinct peak in the Raman spectrum.

Accelerated HKUST-1 Thin-Film Property Optimization Using Active Learning

A flow-coating method termed solution shearing has been shown to grow large-area thin films with no void spaces. Attaining full coverage is one of the key prerequisites for the adoption of any metal-organic framework (MOF) thin film for a variety of practical applications, including separation, membranes and sensors. However, the solution-shearing process has multiple discrete and continuous parameters that can be varied, including the metal ion and linker concentrations, solvents, substrate temperature, coating speed, and the number of coating passes. Optimization of these parameters for full coverage is a time-consuming and daunting process due to vast parameter space. Here, we incorporate an active learning approach into the solution-sheared HKUST-1 thin-film-processing parameters to control the coverage and extend the approach to gain control over the thickness. The understanding of high-quality MOF thin-film formation using solution shearing is improved by correlating the processing parameter sets and their corresponding film coverage. A large area and fully covered HKUST-1 thin film with a minimized thickness of 2.2 μm is fabricated by using guidance from active learning. To confirm full coverage, a redox-active molecule, called 7,7,8,8-tetracyanoquinodimethane (TCNQ), is incorporated along with the HKUST-1 thin film. The TCNQ@HKUST-1 thin film with a minimized thickness has the same order of magnitude of electrical conductivity as that of the TCNQ@HKUST-1 thin film created previously while reducing the film thickness by 60%. We show that active learning has the potential to rapidly navigate the vast processing space in multicomponent systems, especially when experiments are expensive and traditional computational models are not readily available for process optimization.

Hetero-metallic metal-organic frameworks for room-temperature NO2 sensing

Metal-organic frameworks (MOFs) with exceptional features such as high structural diversity and surface area as well as controlled pore size has been considered a promising candidate for developing room temperature highly-sensitive gas sensors. In comparison, the hetero-metallic MOFs with redox-active open-metal sites and mixed metal nodes may create peculiar surface properties and synergetic effects for enhanced gas sensing performances. In this work, the Fe atoms in the Fe₃ (Porous coordination network) PCN-250 MOFs are partially replaced by transition metal Co, Mn, and Zn through a facile hydrothermal approach, leading to the formation of hetero-metallic MOFs (Fe₂^IIIM^II, M = Co, Mn, and Zn). While the PCN-250 framework is maintained, the morphological and electronic band structural properties are manipulated upon the partial metal replacement of Fe. More importantly, the room temperature NO₂ sensing performances are significantly varied, in which Fe₂Mn PCN-250 demonstrates the largest response magnitude for ppb-level NO₂ gas compared to those of pure Fe₃ PCN-250 and other hetero-metallic MOF structures mainly attributed to the highest binding energy of NO₂ gas. This work demonstrates the strong potential of hetero-metallic MOFs with carefully engineered substituted metal clusters for power-saving and high-performance gas sensing applications.

2D Molybdenum Carbide MXenes for Enhanced Selective Detection of Humidity in Air

2D transition metal carbides and nitrides (MXenes) open up novel opportunities in gas sensing with high sensitivity at room temperature. Herein, 2D Mo₂ CT_x flakes with high aspect ratio are successfully synthesized. The chemiresistive effect in a sub-µm MXene multilayer for different organic vapors and humidity at 10¹ -10⁴  ppm in dry air is studied. Reasonably, the low-noise resistance signal allows the detection of H₂ O down to 10 ppm. Moreover, humidity suppresses the response of Mo₂ CT_x to organic analytes due to the blocking of adsorption active sites. By measuring the impedance of MXene layers as a function of ac frequency in the 10^-2 -10⁶  Hz range, it is shown that operation principle of the sensor is dominated by resistance change rather than capacitance variations. The sensor transfer function allows to conclude that the Mo₂ CT_x chemiresistance is mainly originating from electron transport through interflake potential barriers with heights up to 0.2 eV. Density functional theory calculations, elucidating the Mo₂ C surface interaction with organic analytes and H₂ O, explain the experimental data as an energy shift of the density of states under the analyte's adsorption which induces increasing electrical resistance.

Thermal Analysis of a Metal-Organic Framework ZnxCo1-X-ZIF-8 for Recent Applications

Zeolitic imidazolate frameworks (ZIFs) are interesting materials for use in several aspects: energy storage material, gas sensing, and photocatalysis. The thermal stability and pyrolysis process are crucial in determining the active phase of the material. A deep understanding of the pyrolysis mechanism is in demand. Therefore, the thermodynamics and combustion process with different heating rates was examined, and the kinetic parameters were computed employing thermogravimetric tests. Based on the TG analysis of combustion, pyrolysis moves to the high-temperature region with an increase in heating rate. The decomposition process can be separated into the dehydration (300-503 K) and the pyrolysis reaction (703-1100 K). Three points of the decomposition process are performed by dynamical analysis owing to shifts of slopes, but the combustion process has only one stage. The Zeolitic imidazolate framework's structure properties were examined using TDDFT-DFT/DMOl3 simulation techniques. Dynamical parameters, for instance, the possible mechanism, the pre-exponential factor, and the apparent activation energy are obtained through comparison using the Kissinger formula. The thermodynamics analysis of the Zn1-xCox-ZIF-8 materials is an effective way to explore the temperature influence on the process of pyrolysis, which can benefit several environment purifications, photocatalyst, and recent applications.

Metal-Organic-Frameworks: Low Temperature Gas Sensing and Air Quality Monitoring

As an emerging class of hybrid nanoporous materials, metal-organic frameworks (MOFs) have attracted significant attention as promising multifunctional building blocks for the development of highly sensitive and selective gas sensors due to their unique properties, such as large surface area, highly diversified structures, functionalizable sites and specific adsorption affinities. Here, we provide a review of recent advances in the design and fabrication of MOF nanomaterials for the low-temperature detection of different gases for air quality and environmental monitoring applications. The impact of key structural parameters including surface morphologies, metal nodes, organic linkers and functional groups on the sensing performance of state-of-the-art sensing technologies are discussed. This review is concluded by summarising achievements and current challenges, providing a future perspective for the development of the next generation of MOF-based nanostructured materials for low-temperature detection of gas molecules in real-world environments.

An Overview of Artificial Olfaction Systems with a Focus on Surface Plasmon Resonance for the Analysis of Volatile Organic Compounds

The last three decades have witnessed an increasing demand for novel analytical tools for the analysis of gases including odorants and volatile organic compounds (VOCs) in various domains. Traditional techniques such as gas chromatography coupled with mass spectrometry, although very efficient, present several drawbacks. Such a context has incited the research and industrial communities to work on the development of alternative technologies such as artificial olfaction systems, including gas sensors, olfactory biosensors and electronic noses (eNs). A wide variety of these systems have been designed using chemiresistive, electrochemical, acoustic or optical transducers. Among optical transduction systems, surface plasmon resonance (SPR) has been extensively studied thanks to its attractive features (high sensitivity, label free, real-time measurements). In this paper, we present an overview of the advances in the development of artificial olfaction systems with a focus on their development based on propagating SPR with different coupling configurations, including prism coupler, wave guide, and grating.

ZnO@ZIF-8 Core-Shell Structure Gas Sensors with Excellent Selectivity to H2

As the energy crisis becomes worse, hydrogen as a clean energy source is more and more widely used in industrial production and people's daily life. However, there are hidden dangers in hydrogen storage and transportation, because of its flammable and explosive features. Gas detection is the key to solving this problem. High quality sensors with more practical and commercial value must be able to accurately detect target gases in the environment. Emerging porous metal-organic framework (MOF) materials can effectively improve the selectivity of sensors as a result of high surface area and coordinated pore structure. The application of MOFs for surface modification to improve the selectivity and sensitivity of metal oxides sensors to hydrogen has been widely investigated. However, the influence of MOF modified film thickness on the selectivity of hydrogen sensors is seldom studied. Moreover, the mechanism of the selectivity improvement of the sensors with MOF modified film is still unclear. In this paper, we prepared nano-sized ZnO particles by a homogeneous precipitation method. ZnO nanoparticle (NP) gas sensors were prepared by screen printing technology. Then a dense ZIF-8 film was grown on the surface of the gas sensor by hydrothermal synthesis. The morphology, the composition of the elements and the characters of the product were analyzed by X-ray diffraction analysis (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), energy dispersive spectrometer (EDS), Brunauer-Emmett-Teller (BET) and differential scanning calorimetry (DSC). It is found that the ZIF-8 film grown for 4 h cannot form a dense core-shell structure. The thickness of ZIF-8 reaches 130 nm at 20 h. Through the detection and analysis of hydrogen (1000 ppm), ethanol (100 ppm) and acetone (50 ppm) from 150 °C to 290 °C, it is found that the response of the ZnO@ZIF-8 sensors to hydrogen has been significantly improved, while the response to ethanol and acetone was decreased. By comparing the change of the response coefficient, when the thickness of ZIF-8 is 130 nm, the gas sensor has a significantly improved selectivity to hydrogen at 230 °C. The continuous increase of the thickness tends to inhibit selectivity. The mechanism of selectivity improvement of the sensors with different thickness of the ZIF-8 films is discussed.

Prussian blue-carboxylated MWCNTs/ZIF-67 composite: a new electrochemical sensing platform for paracetamol detection with high sensitivity

In this study, the composite of Prussian blue-carboxylated MWCNTs/ZIF-67 (PB-MWCNTs-COOH/ZIF-67) was synthesized and used as modified electrode material to fabricate an electrochemical sensor for the determination of paracetamol (PAR). In this sensor system, negatively charged MWCNTs-COOH as support for the immobilization of positively charged PB can effectively avoid the agglomeration of PB and enhance the stability, conductivity and catalytic activity of the composite. ZIF-67 particles coating outside PB-MWCNTs-COOH promotes the concentration of PAR. Benefiting from the synergistic effect, the PB-MWCNTs-COOH/ZIF-67 based sensor exhibits significantly improved electrochemical sensing behavior toward the oxidation of PAR. Under the optimum conditions, the PAR sensor presents wide linear ranges of 0.01-70 μM with a low limit of detection of 3.3 nM (S/N = 3). The method also possesses long-term stability, good reproducibility and selectivity, and was employed to the determination of PAR contents in PAR tablets sample.

Volatile Organic Compound Vapour Measurements Using a Localised Surface Plasmon Resonance Optical Fibre Sensor Decorated with a Metal-Organic Framework

A tip-based fibreoptic localised surface plasmon resonance (LSPR) sensor is reported for the sensing of volatile organic compounds (VOCs). The sensor is developed by coating the tip of a multi-mode optical fibre with gold nanoparticles (size: 40 nm) via a chemisorption process and further functionalisation with the HKUST-1 metal–organic framework (MOF) via a layer-by-layer process. Sensors coated with different cycles of MOFs (40, 80 and 120) corresponding to different crystallisation processes are reported. There is no measurable response to all tested volatile organic compounds (acetone, ethanol and methanol) in the sensor with 40 coating cycles. However, sensors with 80 and 120 coating cycles show a significant redshift of resonance wavelength (up to ~9 nm) to all tested volatile organic compounds as a result of an increase in the local refractive index induced by VOC capture into the HKUST-1 thin film. Sensors gradually saturate as VOC concentration increases (up to 3.41%, 4.30% and 6.18% in acetone, ethanol and methanol measurement, respectively) and show a fully reversible response when the concentration decreases. The sensor with the thickest film exhibits slightly higher sensitivity than the sensor with a thinner film. The sensitivity of the 120-cycle-coated MOF sensor is 13.7 nm/% (R² = 0.951) with a limit of detection (LoD) of 0.005% in the measurement of acetone, 15.5 nm/% (R² = 0.996) with an LoD of 0.003% in the measurement of ethanol and 6.7 nm/% (R² = 0.998) with an LoD of 0.011% in the measurement of methanol. The response and recovery times were calculated as 9.35 and 3.85 min for acetone; 5.35 and 2.12 min for ethanol; and 2.39 and 1.44 min for methanol. The humidity and temperature crosstalk of 120-cycle-coated MOF was measured as 0.5 ± 0.2 nm and 0.5 ± 0.1 nm in the humidity range of 50–75% relative humidity (RH) and temperature range of 20–25 °C, respectively.

A novel high sensitive Cd-MOF fluorescent probe for acetone vapor in air and picric acid in water: Synthesis, structure and sensing properties

A novel three-dimensional luminescence Cd-MOF sensor with the molecular formula {[(CH₃)₂NH₂]₂ Cd₃(ptptc)₂} (complex 1) has been synthesized by using terphenyl-3,3',5,5'-tetracarboxylic acid (H₄ptptc) and Cd(NO₃)₂·4H₂O under solvothermal conditions. Single crystal X-ray diffraction analysis shows that complex 1 crystallizes in the monoclinic system C2/c space group and consists of one-dimensional channels. Complex 1 exhibits characteristic fluorescence emission (λ_em = 380 nm) both in solid state and solvents upon excitation at 300 nm. Real-time fluorescence quenching of complex 1 was observed in the fluorescence sensing of acetone vapor and picric acid. Intriguingly, ppm scale detection limit for acetone vapor in air and nano-mole scale detection limit for picric acid in water were observed. Moreover, good reusability and liner/nonlinear relationships were observed in the fluorescent titration.

A novel Cd-MOF with enhanced thermo-sensitivity: the rational design, synthesis and multipurpose applications

A novel thermo-sensitive fluorescent Cd-MOF probe (complex 1) and its multipurpose sensing properties have been revealed.

Gas sensors based on mass-sensitive transducers. Part 2: Improving the sensors towards practical application

Within the framework outlined in the first part of the review, the second part addresses attempts to increase receptor material performance through the use of sensor systems and chemometric methods, in conjunction with receptor preparation methods and sensor-specific tasks. Conclusions are then drawn, and development perspectives for gravimetric sensors are discussed.

Coordination Polymers Based on Highly Emissive Ligands: Synthesis and Functional Properties

Coordination polymers are constructed from metal ions and bridging ligands, linking them into solid-state structures extending in one (1D), two (2D) or three dimensions (3D). Two- and three-dimensional coordination polymers with potential voids are often referred to as metal-organic frameworks (MOFs) or porous coordination polymers. Luminescence is an important property of coordination polymers, often playing a key role in their applications. Photophysical properties of the coordination polymers can be associated with intraligand, metal-centered, guest-centered, metal-to-ligand and ligand-to-metal electron transitions. In recent years, a rapid growth of publications devoted to luminescent or fluorescent coordination polymers can be observed. In this review the use of fluorescent ligands, namely, 4,4'-stilbenedicarboxylic acid, 1,3,4-oxadiazole, thiazole, 2,1,3-benzothiadiazole, terpyridine and carbazole derivatives, naphthalene diimides, 4,4',4''-nitrilotribenzoic acid, ruthenium(II) and iridium(III) complexes, boron-dipyrromethene (BODIPY) derivatives, porphyrins, for the construction of coordination polymers are surveyed. Applications of such coordination polymers based on their photophysical properties will be discussed. The review covers the literature published before April 2020.

Metal–Organic Framework Thin Films: Fabrication, Modification, and Patterning

Metal–organic frameworks (MOFs) have been of great interest for their outstanding properties, such as large surface area, low density, tunable pore size and functionality, excellent structural flexibility, and good chemical stability. A significant advancement in the preparation of MOF thin films according to the needs of a variety of applications has been achieved in the past decades. Yet there is still high demand in advancing the understanding of the processes to realize more scalable, controllable, and greener synthesis. This review provides a summary of the current progress on the manufacturing of MOF thin films, including the various thin-film deposition processes, the approaches to modify the MOF structure and pore functionality, and the means to prepare patterned MOF thin films. The suitability of different synthesis techniques under various processing environments is analyzed. Finally, we discuss opportunities for future development in the manufacturing of MOF thin films.

Solvent Impact on the Properties of Benchmark Metal-Organic Frameworks: Acetonitrile-Based Synthesis of CAU-10, Ce-UiO-66, and Al-MIL-53

Herein is reported the utilization of acetonitrile as a new solvent for the synthesis of the three significantly different benchmark metal-organic frameworks (MOFs) CAU-10, Ce-UiO-66, and Al-MIL-53 of idealized composition [Al(OH)(ISO)], [Ce6 O4 (OH)4 (BDC)6 ], and [Al(OH)(BDC)], respectively (ISO2- : isophthalate, BDC2- : terephthalate). Its use allowed the synthesis of Ce-UiO-66 on a gram scale. While CAU-10 and Ce-UiO-66 exhibit properties similar to those reported elsewhere for these two materials, the obtained Al-MIL-53 shows no structural flexibility upon adsorption of hydrophilic or hydrophobic guest molecules such as water and xenon and is stabilized in its large-pore form over a broad temperature range (130-450 K). The stabilization of the large-pore form of Al-MIL-53 was attributed to a high percentage of noncoordinating -COOH groups as determined by solid-state NMR spectroscopy. The defective material shows an unusually high water uptake of 310 mg g-1 within the range of 0.45 to 0.65 p/p°. In spite of showing no breathing effect upon water adsorption it exhibits distinct mechanical properties. Thus, mercury intrusion porosimetry studies revealed that the solid can be reversibly forced to breathe by applying moderate pressures (≈60 MPa).

Gas Sensors Based on Chemi-Resistive Hybrid Functional Nanomaterials

Chemi-resistive sensors based on hybrid functional materials are promising candidates for gas sensing with high responsivity, good selectivity, fast response/recovery, great stability/repeatability, room-working temperature, low cost, and easy-to-fabricate, for versatile applications. This progress report reviews the advantages and advances of these sensing structures compared with the single constituent, according to five main sensing forms: manipulating/constructing heterojunctions, catalytic reaction, charge transfer, charge carrier transport, molecular binding/sieving, and their combinations. Promises and challenges of the advances of each form are presented and discussed. Critical thinking and ideas regarding the orientation of the development of hybrid material-based gas sensor in the future are discussed.

Electrical conductivity and magnetic bistability in metal–organic frameworks and coordination polymers: charge transport and spin crossover at the nanoscale

This review aims to reassess the progress, issues and opportunities in the path towards integrating conductive and magnetically bistable coordination polymers and metal–organic frameworks as active components in electronic devices.

Porous materials applied to biomarker sensing in exhaled breath for monitoring and detecting non-invasive pathologies

Overview of the use of porous materials for gas sensing to analyze the exhaled breath of patients for disease identification.

A self-penetrated three-dimensional zinc(II) coordination framework based on 4,4',4''-(1,3,5-triazine-2,4,6-triyl)tribenzoic acid and 1,3-bis[(imidazol-1-yl)methyl]benzene ligands: synthesis, structure and properties

With the rapid development of metal-organic frameworks (MOFs), a variety of MOFs and their derivatives have been synthesized and reported in recent years. Commonly, multifunctional aromatic polycarboxylic acids and nitrogen-containing ligands are employed to construct MOFs with fascinating structures. 4,4',4''-(1,3,5-Triazine-2,4,6-triyl)tribenzoic acid (H₃TATB) and the bidentate nitrogen-containing ligand 1,3-bis[(imidazol-1-yl)methyl]benzene (bib) were selected to prepare a novel Zn^II-MOF under solvothermal conditions, namely poly[[tris{μ-1,3-bis[(imidazol-1-yl)methyl]benzene}bis[μ₃-4,4',4''-(1,3,5-triazine-2,4,6-triyl)tribenzoato]trizinc(II)] dimethylformamide disolvate trihydrate], {[Zn₃(C₂₄H₁₂N₃O₆)₂(C₁₄H₁₄N₄)₃]·2C₃H₇NO·3H₂O}_n (1). The structure of 1 was characterized by single-crystal X-ray diffraction, IR spectroscopy and powder X-ray diffraction. The properties of 1 were investigated by thermogravimetric and fluorescence analysis. Single-crystal X-ray diffraction shows that 1 belongs to the monoclinic space group Pc. The asymmetric unit contains three crystallographically independent Zn^II centres, two 4,4',4''-(1,3,5-triazine-2,4,6-triyl)tribenzoate (TATB^3-) anions, three complete bib ligands, one and a half free dimethylformamide molecules and three guest water molecules. Each Zn^II centre is four-coordinated and displays a distorted tetrahedral coordination geometry. The Zn^II centres are connected by TATB^3- anions to form an angled ladder chain with large windows. Simultaneously, the bib ligands link Zn^II centres to give a helical Zn-bib-Zn chain. Furthermore, adjacent ladders are bridged by Zn-bib-Zn chains to form a fascinating three-dimensional self-penetrated framework with the short Schläfli symbol 6⁵·7·8¹³·9·10. In addition, the luminescence properties of 1 in the solid state and the fluorescence sensing of metal ions in suspension were studied. Significantly, compound 1 shows potential application as a fluorescent sensor with sensing properties for Zr⁴⁺ and Cu²⁺ ions.

On the Use of MOFs and ALD Layers as Nanomembranes for the Enhancement of Gas Sensors Selectivity

Improving the selectivity of gas sensors is crucial for their further development. One effective route to enhance this key property of sensors is the use of selective nanomembrane materials. This work aims to present how metal-organic frameworks (MOFs) and thin films prepared by atomic layer deposition (ALD) can be applied as nanomembranes to separate different gases, and hence improve the selectivity of gas sensing devices. First, the fundamentals of the mechanisms and configuration of gas sensors will be given. A selected list of studies will then be presented to illustrate how MOFs and ALD materials can be implemented as nanomembranes and how they can be implemented to improve the operational performance of gas sensing devices. This review comprehensively shows the benefits of these novel selective nanomaterials and opens prospects for the sensing community.