Adsorption of volatile organic compounds over MIL-125-NH2

A comprehensive review and perspective research in technology integration for the treatment of gaseous volatile organic compounds

Volatile organic compounds (VOCs) are harmful pollutants emitted from industrial processes. They pose a risk to human health and ecosystems, even at low concentrations. Controlling VOCs is crucial for good air quality. This review aims to provide a comprehensive understanding of the various methods used for controlling VOC abatement. The advancement of mono-functional treatment techniques, including recovery such as absorption, adsorption, condensation, and membrane separation, and destruction-based methods such as natural degradation methods, advanced oxidation processes, and reduction methods were discussed. Among these methods, advanced oxidation processes are considered the most effective for removing toxic VOCs, despite some drawbacks such as costly chemicals, rigorous reaction conditions, and the formation of secondary chemicals. Standalone technologies are generally not sufficient and do not perform satisfactorily for the removal of hazardous air pollutants due to the generation of innocuous end products. However, every integration technique complements superiority and overcomes the challenges of standalone technologies. For instance, by using catalytic oxidation, catalytic ozonation, non-thermal plasma, and photocatalysis pretreatments, the amount of bioaerosols released from the bioreactor can be significantly reduced, leading to effective conversion rates for non-polar compounds, and opening new perspectives towards promising techniques with countless benefits. Interestingly, the three-stage processes have shown efficient decomposition performance for polar VOCs, excellent recoverability for nonpolar VOCs, and promising potential applications in atmospheric purification. Furthermore, the review also reports on the evolution of mathematical and artificial neural network modeling for VOC removal performance. The article critically analyzes the synergistic effects and advantages of integration. The authors hope that this article will be helpful in deciding on the appropriate strategy for controlling interested VOCs.

Diaminopropane-appended activated carbons for the adsorptive removal of gaseous formaldehyde using a portable indoor air purification unit

It is of significant practical interest to develop high-performance air purifier (AP) for removing carcinogenic volatile organic compounds present ubiquitously in indoor air (e.g., formaldehyde (FA)). In this regard, a portable AP system was designed by loading honeycomb ceramic filters with diaminopropane (DAP)-appended activated carbon (AC). The maximum removal efficiencies (REs) of AP loaded with 10, 20, 30, and 50 %-DAP/AC were 26.2, 28, 88.3, and 89.4 %, respectively, against 5 ppm FA (at 160 L min-1). Hence, the 30 % DAP unit was used mainly in this work. The removal efficiency of 30 %-DAP/AC (160 L min-1), when tested against 2 ppm FA, decreased from 90.3 to 73.2 % with an increase in relative humidity from 0 to 60 %. The performance of the AP unit, when assessed kinetically in terms of the clean air delivery rate (CADR), reached as high as 10.2 L min-1 at the flow rate of 160 L min-1. Isotherm analysis further demonstrated the complex multilayered adsorption behavior of FA. Based on the density functional theory (DFT) simulation, the superiority of DAP/AC for FA adsorption can be attributed to the synergy of covalent (chemisorption) and non-covalent (pore filling and film diffusion) interactions.

Effect of benzoic acid and dopamine hydrochloride as a modulator in the water resistance of Universitetet i Oslo-67: Adsorption performance and mechanism

The severe hazards on ecological environment and human body caused by volatile organic compounds (VOCs) have attracted worldwide substantial attention. In this research, a series of novel modified Universitetet i Oslo-67 (UiO-67) with water resistance were prepared and characterized, which had modified by benzoic acid and dopamine hydrochloride (67-ben-DH). On this basis, the adsorption performance, adsorption kinetics, defect engineering and water resistance of adsorbent were investigated. The results indicated that the excellent pore structure and specific surface area of 67-ben-DH-6 (molar ratio of Zr4+ to DH was 1:6) were retained while the adsorption performance and water resistance of the adsorbent were improved. Due to more defects, excellent adsorption diffusion and strong π-π interactions of 67-ben-DH-6, it performed the maximum adsorption capacity of toluene (793 mg g-1). Furthermore, the outstanding water resistance was attributed to the fact that N element of DH reduced the affinity of the adsorbent with water. Finally, the density functional theory (DFT) calculations showed that the adsorbent 67-ben-DH-6 had the maximum adsorption energy for toluene (-99.4 kJ mol-1) and the minimum adsorption energy for water (-17.8 kJ mol-1). Thus, the potential mechanism of 67-ben-DH for efficient toluene adsorption and water resistance was verified from a microscopic perspective.

Specific Recognition and Adsorption of Volatile Organic Compounds by Using MIL-125-Based Porous Fluorescence Probe Material

The severity of the volatile organic compounds (VOCs) issue calls for effective detection and management of VOC materials. Metal-organic frameworks (MOFs) are organic-inorganic hybrid crystals with promising prospects in luminescent sensing for VOC detection and identification. However, MOFs have limitations, including weak response signals and poor sensitivity towards VOCs, limiting their application to specific types of VOC gases. To address the issue of limited recognition and single luminosity for specific VOCs, we have introduced fluorescent guest molecules into MOFs as reference emission centers to enhance sensitivity. This composite material combines the gas adsorption ability of MOFs to effectively adsorb VOCs. We utilized (MIL-125/NH2-MIL-125) as the parent material for adsorbing fluorescent molecules and selected suitable solid fluorescent probes (FGFL-B1) through fluorescence enhancement using thioflavin T and MIL-125. FGFL-B1 exhibited a heightened fluorescence response to various VOCs through charge transfer between fluorescent guest molecules and ligands. The fluorescence enhancement effect of FGFL-B1 on tetrahydrofuran (THF) was particularly pronounced, accompanied by a color change from yellow to yellowish green in the presence of CCl4. FGFL-B1 demonstrated excellent adsorption properties for THF and CCl4, with saturated adsorption capacities of 655.4 mg g-1 and 811.2 mg g-1, respectively. Furthermore, FGFL-B1 displayed strong luminescence stability and reusability, making it an excellent sensing candidate. This study addresses the limitations of MOFs in VOC detection, opening avenues for industrial and environmental applications.

Management of typical VOCs in air with adsorbents: status and challenges

The serious harm of volatile organic compounds (VOCs) to the ecological environment and human health has attracted widespread attention worldwide. With economic growth and accelerated industrialization, the anthropogenic emissions of VOCs have continued to increase. The most crucial aspect is to choose the appropriate adsorbent, which is very important for the VOCs removal. The search for environmentally friendly VOCs treatment technologies is urgent. The adsorption method is one of the most promising VOCs emission reduction technologies with the advantages of high cost-effectiveness, simple operation, and low energy consumption. One of the most critical aspects is the selection of the appropriate adsorbent, which is very important for the removal of VOCs. This work provides an overview of the sources and hazards of VOCs, focusing on recent research advances in VOCs adsorption materials and the key factors controlling the VOCs adsorption process. A summary of the key challenges and opportunities for each adsorbent is also provided. The adsorption capacity for VOCs is enhanced by an abundant specific surface area; the most efficient adsorption process is achieved when the pore size is slightly larger than the molecular diameter of VOCs; the increase in the number of chemical functional groups contributes to the increase in adsorption capacity. In addition, methods of activation and surface modification to improve the adsorption capacity for VOCs are discussed to guide the design of more advanced adsorbents.

Metal-organic frameworks in photocatalytic Z-scheme heterojunctions: an emerging technology

There is an urgent need for cleaner production processes for chemicals. An efficient and promising alternative for such reactions is heterogeneous photocatalysis, which works on the principle of converting (visible) light, including solar energy, into chemical energy. To that end, properly designed semiconductor based photocatalysts are necessary to trigger the photocatalytic reactions. Many commonly used photocatalysts have too large bandgaps (3-3.4 eV) to use visible light and a too low surface area for efficient production. Metal-organic frameworks (MOFs) have emerged as an encouraging class of materials for photocatalytic applications due to their (i) large surface area and porosity that facilitate adsorption towards chemicals, (ii) tunable crystallinity and optical and electronic properties for efficient light absorption in the visible region, (iii) tunable composition and functionality that make them versatile photocatalysts for a wide range of reactions, and (iv) facile development of composites with other semiconductors to produce Z-scheme heterojunctions that can effectively suppress the recombination of photogenerated charges. Ongoing research has started focusing on the judicious construction of Z-scheme heterojunctions in MOFs, to mimic natural photosynthesis, such that the MOF photocatalysts have higher light harvesting capacity, spatially separated reductive and oxidative active sites, and well-preserved redox ability. This review provides a concise compilation of the recent progress in the development and applications of MOF-based Z-scheme photocatalysts, their advanced characterization, and future perspectives for further advancements.

A magnetic MIL-125-NH2@chitosan composite as a separable adsorbent for the removal of Cr(VI) from wastewater

Metal-organic frameworks (MOFs) are gradually used since of their huge specific surface area and superior pore structure. However, there are problems such as easy aggregation and difficult separation in water treatment. In this study, we prepared composite microspheres (FMCS-1) by modifying MIL-125-NH₂ with Fe₃O₄ and chitosan. The structural characterization and performance analysis of the materials showed that the introduction of chitosan effectively prevents the stacking of MOFs. The magnetic test manifested that Fe₃O₄ solved the problem of the difficult separation of MOFs from water. The removal potential of toxic Cr(VI) was tested by adsorption experiments. The isotherm model indicated that FMCS-1 is a single molecular layer adsorbent with a maximum adsorption capacity of 109.46 mg/g at pH = 2. The adsorption kinetics showed that the adsorption of Cr(VI) by FMCS-1 was chemical adsorption. The acid resistance test demonstrated that FMCS-1 can exist stably in acid solutions. The recycling experiments proved that the adsorbent can be reused and the removal percentage still reaches 50 % after 5 cycles. This work expands the application of MOFs in water treatment and also provides an effective adsorbent for Cr(VI) removal.

The Complexity of Comparative Adsorption of C6 Hydrocarbons (Benzene, Cyclohexane, n-Hexane) at Metal-Organic Frameworks

The relatively stable MOFs Alfum, MIL-160, DUT-4, DUT-5, MIL-53-TDC, MIL-53, UiO-66, UiO-66-NH₂, UiO-66(F)₄, UiO-67, DUT-67, NH₂-MIL-125, MIL-125, MIL-101(Cr), ZIF-8, ZIF-11 and ZIF-7 were studied for their C₆ sorption properties. An understanding of the uptake of the larger C₆ molecules cannot simply be achieved with surface area and pore volume (from N₂ sorption) but involves the complex micropore structure of the MOF. The maximum adsorption capacity at p p₀^-1 = 0.9 was shown by DUT-4 for benzene, MIL-101(Cr) for cyclohexane and DUT-5 for n-hexane. In the low-pressure range from p p₀^-1 = 0.1 down to 0.05 the highest benzene uptake is given by DUT-5, DUT-67/UiO-67 and MIL-101(Cr), for cyclohexane and n-hexane by DUT-5, UiO-67 and MIL-101(Cr). The highest uptake capacity at p p₀^-1 = 0.02 was seen with MIL-53 for benzene, MIL-125 for cyclohexane and DUT-5 for n-hexane. DUT-5 and MIL-101(Cr) are the MOFs with the widest pore window openings/cross sections but the low-pressure uptake seems to be controlled by a complex combination of ligand and pore-size effect. IAST selectivities between the three binary mixtures show a finely tuned and difficult to predict interplay of pore window size with (critical) adsorptive size and possibly a role of electrostatics through functional groups such as NH₂.

Synthesis and Characterization of the Metal–Organic Framework CIM-80 for Organic Compounds Adsorption

Metal–organic frameworks (MOF) are a new type of porous materials that have great potential for adsorption of voltaic organic compounds (VOCs). These types of materials composed of metal ions and organic ligands are easy to synthesize, have high surface areas, their surface chemistry can be adjusted to the desired application, and they can also have good chemical and thermal stability. Therefore, this work focuses on the synthesis of a highly hydrophobic MOF material called CIM-80, a porous material that is made up of the Al³⁺ cation and the mesaconate linker. This MOF has a B.E.T. of approximately 800 m²/g and has potential applications for the adsorption of hydrophobic organic compounds. However, its synthesis is expensive and very dirty. Therefore, we have studied the synthesis conditions necessary to achieve high synthesis yields (85%) and materials with high crystallinity and accessible porosity. To achieve these results, we have used urea as a mild deprotonation reagent and modulator as an alternative to NaOH, which is traditionally used for the synthesis of this MOF. Once the synthesis of this material was controlled, its adsorption/desorption behavior of water and organic compounds such as toluene, cyclohexane and m-xylene was studied by means of vapor adsorption isotherms. The results show the hydrophobic character of the material and the greater affinity the material has toward aliphatic compounds than toward aromatic ones, with toluene being the most adsorbed compound, followed by cyclohexane and m-xylene.

Adsorptive removal of some Cl-VOC's as dangerous environmental pollutants using feather-like γ-Al2O3 derived from aluminium waste with life cycle analysis

Herein, we designed a cost-effective preparation method of nanocomposite γ-Al₂O₃ derived from Al-waste. The produced material has a feather-like morphology, and its adsorption of some chlorinated volatile organic compounds (Cl-VOC's) such as benzyl chloride, chloroform and carbon tetrachloride (C₇H₇Cl, CHCl₃ and CCl₄) was investigated due to their potential carcinogenic effect on humans. It showed a characteristic efficiency towards the adsorptive removal of these compounds over a long period, i.e., eight continuous weeks, at ambient temperature and atmospheric pressure. After 8-weeks, the adsorbed amounts of these compounds were determined as: 325.3 mg C₇H₇Cl, 247.6 mg CHCl₃ and 253.3 mg CCl₄ per g of γ-Al₂O_3, respectively. CCl₄ was also found to be dissociatively adsorbed on the surface of γ-Al₂O₃, whereas CHCl₃ and C₇H₇Cl were found to be associatively adsorbed. The prepared γ-Al₂O₃ has a relatively high surface area (i.e., 192.2 m². g^-1) and mesoporosity with different pore diameters in the range of 25-47 Å. Furthermore, environmental impacts of the nanocomposite γ-Al₂O₃ preparation were evaluated using life cycle assessment. For prepartion of adsorbent utilising 1 kg of scrap aluminium wire, it was observed that potential energy demand was 288 MJ, climate change potential was 19 kg CO₂ equivalent, acidification potential was 0.115 kg SO₂ equivalent and eutrophication potential was 0.018 kg PO₄^3- equivalent.

A simple, environmental-friendly and reliable d-SPE method using amino-containing metal-organic framework MIL-125-NH2 to determine pesticide residues in pomelo samples from different localities

A simple, environmentally-friendly and reliable method was developed to simultaneously monitor the residue of methyl 1-naphthalene acetate, parathion-methyl, fenitrothion, bromophos and phenthoate in pomelo by using dispersive solid-phase extraction technique (d-SPE). In this method, these target analytes were captured by MIL-125-NH₂ and detected by GC-MS/MS. The key parameters of d-SPE were optimized by the single factor experiment. Under the optimized conditions, a good determination coefficient (R² > 0.9922) and extraction recoveries (64.7-116.8%) are obtained. The limit of detections (0.03-1.07 ng/g) is lower than the MRLs in citrus fruits established by EU (10-15000 ng/g) and China (10-10000 ng/g). The precisions of intra-day and inter-day are 1.3-8.9% and 3.8-14.9%, respectively. In addition, the sorbent MIL-125-NH₂ is stable and can be reused at least eight times. These results prove the established method is efficient and reliable to detect the pesticide residues in pomelo.

Selectivity in trace gas sensing: recent developments, challenges, and future perspectives

Selectivity is one of the most crucial figures of merit in trace gas sensing, and thus a comprehensive assessment is necessary to have a clear picture of sensitivity, selectivity, and their interrelations in terms of quantitative and qualitative views.

Adsorption performance and kinetic study of hierarchical porous Fe-based MOFs for toluene removal

In light of the promising merits of large surface area, uniform pore size, and tunable functional groups, metal-organic frameworks (MOFs) have great potential to be utilized for adsorbing volatile organic compounds (VOCs). In this study, three Fe-based MOFs, MIL-100(Fe), MIL-101(Fe), and MIL-53(Fe), were synthesized systematically and used to adsorb a typical VOC, toluene. Static adsorption, dynamic breakthrough curves, and adsorption kinetics were conducted to assess the adsorption performance. Additionally, the surface functional groups, pore structure, and morphology were systematically characterized by means of XRD, SEM, XPS, FTIR and N₂ adsorption-desorption analyses to reveal the cause of the difference in adsorption of these Fe-based MOFs. The results revealed that the maximum equilibrium adsorption capacity of 663 mg/g was achieved by MIL-100(Fe) with the highest specific surface area and pore volume. The dynamic adsorption of toluene on MIL-100(Fe) was in accordance with the pseudo-first order kinetic model and the Langmuir isothermal model. The formed π-π stacking interaction between organic ligands and the benzene ring in the MIL-100(Fe) cluster is the primary adsorption mechanism based on XPS analysis. Moreover, MIL-100(Fe) was easily regenerated via microwave irradiation with a negligible adsorption capacity decrease after three cycles. This work highlights the feasibility of hierarchical porous Fe-based MOFs as toluene adsorbents and promotes the application of MOFs in the field of pollution control.

A Computational Study of Isopropyl Alcohol Adsorption and Diffusion in UiO-66 Metal-Organic Framework: The Role of Missing Linker Defect

Defect engineering leads to an effective manipulation of the physical and chemical properties of metal-organic frameworks (MOFs). Taking the common missing linker defect as an example, the defective MOF generally possesses larger pores and a greater surface area/volume ratio, both of which favor an increased amount of adsorption. When it comes to the self-diffusion of adsorbates in MOFs, however, the missing linker is a double-edged sword: the unsaturated metal sites, due to missing linkers, could interact more strongly with adsorbates and result in a slower self-diffusion. Therefore, it is of fundamental importance to evaluate the two competing factors and reveal which one is dominating, a faster self-diffusion due to larger volume or a slower self-diffusion owing to strong interactions at unsaturated sites. In this work, via Monte Carlo and molecular dynamics simulations, we investigate the behavior of isopropyl alcohol (IPA) in the Zr-based UiO-66 MOFs, with a specific focus on the missing linker effects. The results reveal that unsaturated Zr sites bind strongly with IPA molecules, which in return would significantly reduce the self-diffusion coefficient of IPA. Besides this, for the same level of missing linkers, the location of defective sites also makes a difference. We expect such a theoretical study will provide an in-depth understanding of self-diffusion under confinement, inspire better defect engineering strategics, and promote MOF based materials toward challenging real-life applications.

Recent advances in process engineering and upcoming applications of metal-organic frameworks

Progress in metal-organic frameworks (MOFs) has advanced from fundamental chemistry to engineering processes and applications, resulting in new industrial opportunities. The unique features of MOFs, such as their permanent porosity, high surface area, and structural flexibility, continue to draw industrial interest outside the traditional MOF field, both to solve existing challenges and to create new businesses. In this context, diverse research has been directed toward commercializing MOFs, but such studies have been performed according to a variety of individual goals. Therefore, there have been limited opportunities to share the challenges, goals, and findings with most of the MOF field. In this review, we examine the issues and demands for MOF commercialization and investigate recent advances in MOF process engineering and applications. Specifically, we discuss the criteria for MOF commercialization from the views of stability, producibility, regulations, and production cost. This review covers progress in the mass production and formation of MOFs along with future applications that are not currently well known but have high potential for new areas of MOF commercialization.

Ultrasound irradiation effect on morphological and adsorptive properties of a nanoscale 3D Zn-coordination polymer and derived oxide

In this work, Zn-based coordination polymer [Zn₂(1,3-bdc)bzim₂]_n was successfully synthesized by the sonochemical method using a 13 mm probe-type ultrasound operating at 20 kHz and amplitudes of 30, 40 and 50% corresponding to an acoustic power of 5.5, 8.6, and 10.3 W, respectively. Additionally, a sample was prepared by the slow-diffusion method for comparison. The samples were characterized by FTIR, PXRD, SEM, and BET techniques. The influence of the time and sonication amplitude on the yield of the reaction, crystallite size, and morphology were also studied. It was found that the sonochemical method provided the desired product in 83.9% within 20 min of sonication using the highest level of sonication amplitude. Moreover, this approach resulted in regular, controlled morphology, smaller particles, and higher surface area of the Zn-sample and derived oxide, than the slow diffusion method. The samples prepared by different methodologies were tested for the adsorption of BTEX (benzene, toluene, ethylbenzene, and xylenes) components in six different systems, and the uptakes were quantified by ¹³C NMR spectroscopy. Both samples showed excellent adsorption of benzene, 119.8 mmol/g, and 88.1 mmol/g, for the coordination polymers prepared via the sonochemical and slow-diffusion methods, respectively, corresponding to 63.9%, and 46.9%. These results are in agreement with the non-polar surface of these samples.

An efficient strategy for the enhancement of adsorptivity of microporous carbons against gaseous formaldehyde: Surface modification with aminosilane adducts

In an effort to develop a cost-effective mitigation tool for volatile organic compounds, particularly formaldehyde (FA), microporous activated carbon (AC) was modified into three different forms of AC-1, AC-2, and AC-3 using a raw commercial AC product (AC-0). First, AC-1 and AC-2 were produced by the modification of AC-0 with N/S heteroatoms using identical mixture of dicyandiamide and thiourea precursors through either solvothermal (AC-1) or microwave-assisted calcination (AC-2) synthesis. Second, aminosilane-functionalized AC (AC-3) was prepared solvothermally using N-[3-(Trimethoxysilyl)propyl]ethylenediamine reagent. The relative adsorption performances for gaseous FA (1 ppm) in terms of 10% breakthrough volume (BTV10: L atm g^-1) at near-ambient conditions (25 °C and 1 atm) were AC-3 (132) > AC-2 (66.5) > AC-1 (14.2) > AC-0 (10.4). In a comparison based on partition coefficients (mole kg^-1 Pa^-1) at BTV10, AC-3 outperformed AC-0 by a factor of 214, while the adsorption performance of AC-2 was 36-times higher than AC-1. The enhanced performance of AC-2 over AC-1 reflected the effect of the microwave synthesis protocol on the improvement of surface chemistry (e.g., N/S doping) and texture (e.g., surface area and pore volume) of AC-based adsorbents as compared to conventional solvothermal method. Further, the prominent role of surface chemistry (e.g., relative to textural properties), as observed with the increases in the amount of doped functional elements (including N:C and silicon:C ratios), is supported by the apparent dependence of performance on the selected modification procedures. Based on kinetic and X-ray photoelectron spectroscopy analyses, the superiority of aminosilylated AC-3 can be attributed to a synergistic effect between physisorption (e.g., pore diffusion) and chemical interactions of the FA carbonyl (C=O) group with amine and silica functionalities (via Mannich coupling [Schiff base] and cycloaddition reaction mechanisms, respectively). This confirms the significance of surface chemistry, relative to pore diffusion, in achieving maximum adsorption of gaseous FA molecules.

A critical review on VOCs adsorption by different porous materials: Species, mechanisms and modification methods

Volatile organic compounds (VOCs) have attracted world-wide attention regarding their serious hazards on ecological environment and human health. Industrial processes such as fossil fuel combustion, petrochemicals, painting, coatings, pesticides, plastics, contributed to the large proportion of anthropogenic VOCs emission. Destructive methods (catalysis oxidation and biofiltration) and recovery methods (absorption, adsorption, condensation and membrane separation) have been developed for VOCs removal. Adsorption is established as one of the most promising strategies for VOCs abatement thanks to its characteristics of cost-effectiveness, simplicity and low energy consumption. The prominent progress in VOCs adsorption by different kinds of porous materials (such as carbon-based materials, oxygen-contained materials, organic polymers and composites is carefully summarized in this work, concerning the mechanism of adsorbate-adsorbent interactions, modification methods for the mentioned porous materials, and enhancement of VOCs adsorption capacity. This overview is to provide a comprehensive understanding of VOCs adsorption mechanisms and up-to-date progress of modification technologies for different porous materials.

Utilization of metal-organic frameworks for the adsorptive removal of an aliphatic aldehyde mixture in the gas phase

Considerable efforts have been undertaken in the domain of air quality management for the removal of hazardous volatile organic compounds, particularly carbonyl compounds (CCs). In this study, the competitive sorptive removal of six CCs (namely, formaldehyde, acetaldehyde, propionaldehyde, butyraldehyde, isovaleraldehyde, and valeraldehyde) was assessed using selected metal-organic frameworks (MOFs: MOF-5, MOF-199, UiO-66, and UiO-66-NH₂) and inexpensive commercial activated carbon as a reference sorbent. The sorption experiments were conducted using a mixture of the six CCs (formaldehyde and acetaldehyde at ∼1 Pa and propionaldehyde, butyraldehyde, isovaleraldehyde, and valeraldehyde at ∼0.2 Pa) together with 15 Pa water and 2.6 Pa methanol in 1 bar nitrogen. For all of the carbonyl compounds other than formaldehyde, MOF-199 showed the best 10% breakthrough performance ranging from 34 L g^-1 and 0.14 mol kg^-1 Pa^-1 for acetaldehyde to 1870 L g^-1 and 7.6 mol kg^-1 Pa^-1 for isovaleraldehyde. Among all the sorbents tested, UiO-66-NH₂ exhibited the best 10% breakthrough performance metrics towards the lightest formaldehyde which remains to be one of the most difficult targets for sorptive removal (breakthrough volume: 285 L g^-1 and partition coefficient: 1.1 mol kg^-1 Pa^-1). Theoretical density functional theory (DFT)-based computations were also conducted to provide better insights into the adsorbate-adsorbent interactions. Accordingly, the magnitude of adsorption energy increased with an increase in the CC molar mass due to an enhancement in the synergetic interaction between C[double bond, length as m-dash]O groups (in adsorbate molecules) and the MOF active centers (open metallic centers and/or NH₂ functionality) as the adsorbent. Such interactions were observed to result in strong distortion of MOF structures. In contrast, weak van der Waals attraction between the hydrocarbon "tail" of CC molecules and MOF linkers were seen to play a stabilizing role for the sorbent structure. The presence of the NH₂ group in the MOF structure was suspected to play a key role in capturing lighter CCs, while such an effect was less prominent for heavier CCs. Overall, the results of this study provided a basis for the establishment of an effective strategy to enhance the sorption capacity of MOFs against diverse carbonyl species.

Metal-Organic Frameworks for the Adsorptive Removal of Gaseous Aliphatic Ketones

Recent research endeavors have established metal-organic frameworks (MOFs) as suitable platforms for the adsorptive removal of various environmental pollutants. In this regard, the sorptive performances of four MOFs (MOF-199, UiO-66, UiO-66-NH₂, and Co-CUK-1) were investigated against two gaseous aliphatic ketones (methyl ethyl ketone (MEK) and methyl isobutyl ketone (MiBK)) at a low partial pressure (0.1 Pa). Activated carbon was utilized as a reference commercial sorbent. The 10% breakthrough volume (BTV10) values for MEK decreased in the following order: MOF-199 (4772 L atm g^-1) > activated carbon (224 L atm g^-1) > UiO-66-NH₂ (106 L atm g^-1) > UiO-66 (53 L atm g^-1) > Co-CUK-1 (16 L atm g^-1). In case of MiBK, the relative ordering in BTV10 was consistently maintained while showing noticeable increases in its magnitude: MOF-199 (7659 L atm g^-1) > activated carbon (816 L atm g^-1) > UiO-66-NH₂ (304 L atm g^-1) > UiO-66 (150 L atm g^-1) > Co-CUK-1 (31 L atm g^-1). The superiority of MOF-199 was confirmed toward the adsorptive removal of gaseous aliphatic ketones. For a binary mixture of ketones, the BTV10 values of MOF-199 were reduced considerably for MEK and MiBK (in comparison to single component sorption) such as 1579 and 3969 L atm g^-1, respectively, reflecting competitive inhibition of the adsorption process. Theoretical simulations based on density functional theory (DFT) elucidated the involvement of highly favorable coordination between the carbonyl group present in ketone molecules and the uncoordinated Cu(II) sites in the MOF-199 structure (Lewis acidic centers). Interestingly, MOF-199 maintained appreciable performance toward the mixture of ketones up to 5 cycles to support its practical merit.

Functionalized metal-organic frameworks for photocatalytic degradation of organic pollutants in environment

Currently, many kinds of organic pollutants in air and water have a negative impact on humans and the environment. Notably, as a type of new functional materials, metal-organic frameworks (MOFs) with well-ordered porous structures and numerous active sites have been proven to be ideal photocatalysts for the degradation of organic pollutants. In the past few years, many encouraging achievements have been made in the research field of MOFs for photocatalysis. And a large number of functionalized MOFs have been constructed to improve photocatalytic activity. In this review, recent progress in the photocatalytic degradation of organic pollutants in both air and water using functionalized MOFs are summarized in detail. The focus is on photocatalytic mechanisms and some strategies employed to achieve higher degradation efficiency. Furthermore, the challenges and outlooks in this promising filed are also discussed. We hope this review would be useful for designing more functionalized MOFs with greater photocatalytic performance for the degradation of organic pollutants in the environment.

Synthesis and application of Cu-BTC@ZSM-5 composites as effective adsorbents for removal of toluene gas under moist ambience: kinetics, thermodynamics, and mechanism studies

Metal organic frameworks (MOFs) are excellent adsorbents that provide abundant specific surface area, adjustable pore structure, and rich active sites. The purpose of this study was to prepare composites with hydrophobic and high microporous specific surface area and to adsorb toluene gas in moist ambience. An ethanol activation-assisted hydrothermal method was proposed to synthesize copper-benzene-1,3,5-tricarboxylic acid (Cu-BTC) metal-organic framework, Cu-BTC, and ZSM-5 molecular sieve composites (Cu-BTC@ZSM-5). The dynamic adsorption process of toluene on different adsorbents was investigated, and the results showed that the toluene adsorption capacity of Cu-BTC@ZSM-5 (158.6 mg/g) was 2.53 times higher than Cu-BTC (62.7 mg/g), when the ZSM-5 content is 5% and the humidity is 30%RH. Compared with other factors, the humidity inhibited the adsorption of toluene on Cu-BTC@ZSM-5. Langmuir model and the pseudo-second kinetics model can better describe the adsorption behavior of Cu-BTC@ZSM-5. The thermodynamic results showed the adsorption process was a spontaneous exothermic process at low temperature and mainly physical adsorption. The relative regenerability can still up to 80.4% after six cycles. The adsorption mechanisms of Cu-BTC@ZSM-5 were pore-filling adsorption, π-π interaction, cation-π bonding, and hydrophobic interactions. This study will help to design a systematic route to evaluate the adsorption performance of Cu-BTC@ZSM-5 for toluene.