Effect of the support morphology on the performance of Co nanoparticles deposited on metal–organic framework MIL-53(Al) in Fischer–Tropsch synthesis

Dynamic behavior of metal nanoparticles in MOF materials: analysis with electron microscopy and deep learning

Electron microscopy is a key characterization technique for nanoscale systems, and electron microscopy images are typically recorded and analyzed in terms of the morphology of the objects under study in static mode. The emerging current trend is to analyze the dynamic behavior at the nanoscale observed during electron microscopy measurements. In this work, the study of the stability of MOF structures with different compositions and topologies under conditions of an electron microscope experiment revealed an unusual dynamic behavior of M NPs formed due to the electron-beam-induced transformation of specific frameworks. The transition to the liquid phase led to spatial movement, rapid sintering, and an increase in the M NPs size within seconds. In the case of copper nanoparticles, instantaneous sublimation was observed. The dynamic behavior of Co NPs was analyzed with a computational framework combining deep learning and classic computer vision techniques. The present study for the first time revealed unique information about the stability of a variety of MOFs under an electron beam and the dynamic behavior of the formed M NPs. The formation of Fe, Ni, Cu, and Co NPs was observed from a molecular framework with a specific subsequent behavior - a stable form for Fe, excessive dynamics for Co, and sublimation/condensation for Cu. Two important outcomes of the present study should be mentioned: (i) electron microscopy investigations of MOF samples should be made with care, as decomposition under an electron beam may lead to incorrect results and the appearance of "phantom" nanoparticles; and (ii) MOFs represent an excellent model for fundamental studies of molecular-to-nano transitions in situ in video mode, including a number of dynamic transformations.

The Impact of Functionality and Porous System of Nanostructured Carriers Based on Metal–Organic Frameworks of UiO-66-Type on Catalytic Performance of Embedded Au Nanoparticles in Hydroamination Reaction

New methods for the preparation of metal–organic frameworks UiO-66 and NH2-UiO-66 with a hierarchical porous structure were developed using the MW-assisted technique under atmospheric pressure. The synthesized nanostructured meso-UiO-66 and meso-NH2-UiO-66 matrices were utilized as Au nanoparticle carriers. The resulting Au@meso-UiO-66 and Au@NH2-UiO-66 nanohybrids were studied in the reaction of phenylacetylene hydroamination with aniline into imine ([phenyl-(1-phenylethylydene)amine]) for the first time. Their catalytic behavior is significantly determined by a combination of factors, such as a small crystal size, micro–mesoporous structure, and functionality of the UiO-66 and NH2-UiO-66 carriers, as well as a high dispersion of embedded gold nanoparticles. The Au@meso-UiO-66 and Au@NH2-UiO-66 nanocatalysts demonstrate high activities (TOF), with conversion and selectivity values over 90. This excellent catalytic performance is comparable or even better than that demonstrated by heterogeneous systems based on conventional inorganic and inorganic supports known from the literature.

Modifying HKUST-1 Crystals for Selective Ethane Adsorption Using Ionic Liquids as Synthesis Media

Novel adsorbents for methane and ethane based on HKUST-1 metal-organic framework were synthesized by microwave (MW) assisted technique using ionic liquids (ILs) as synthesis media. It was found that the MW synthesis time remarkably impacts both the product yield and the physico-chemical characteristics of the produced HKUST-1 material. The crystalline phase purity, crystallite size/dispersion and textural properties of the synthesized HKUST-1 matrices determine their performance in methane and ethane adsorption. Therefore, the HKUST-1 material produced in MW fields for 3 min only shows the highest phase purity and the largest surface area (BET) and porosity, along with a rather small crystallite size (below ~300 nm), demonstrating high methane and ethane adsorption capacity in the pressure range 1–30 atm.

Rapid reduction of real-time industry effluent using novel CuO/MIL composite

In this study, a series of novel metal organic framework based composite materials was synthesized using a facile combustion synthesis method. The synthesized materials were characterized using standard analytical techniques for crystallite size, surface functional groups, surface area, porosity, optical properties, and particle size. The increase in the amount of CuO in the composite material resulted decrease in surface area and pore volume. The band-gap energy of the synthesized composites reduced with increase in the amount of CuO. Among the composite, 0.9 CuO:0.1 MIL displayed least emission intensity indicating lower electron-hole recombination and thereby superior charge separation of the material. The increase in the amount of CuO NPs in the composite resulted in increase in the average particle size and decrease in the zeta potential. As an application, the NaBH₄-mediated reduction of Methyl orange dye was studied using the synthesized materials. The increased amount of CuO in the composite resulted in the higher activity of the material. Highest activity was observed with the composite containing 9:1 ratio of CuO and MIL, and this material was further used to investigate the reduction of methylene blue, Rhodamine B, 4-nitrophenol, 2-nitrophenol, and 2, 4-dichlorophenol. The material exhibited excellent activity for all the selected organic pollutants. Finally, the composite containing 9:1 ratio of CuO and MIL was employed for the reduction of a real-time industry effluent and the observed results were encouraging. The reusability aspect of the synthesized material was investigated. Based on the LC-MS analysis, a possible reduction mechanism is proposed.

Highly Active Fischer-Tropsch Synthesis Fe-BDC MOF-Derived Catalyst Prepared by Modified Solvothermal Method

Fe-MIL-88B was prepared by a method that utilizes ferric nitrate and terephthalic acid (TPA or H2BDC) as precursors. The catalyst was characterized by TEM, SEM, FTIR, XRD, BET, and TGA. The pyrolyzed MOF (Fe-MIL-88B/C) was then tested for FTS at 300 psi, 300/340°C and H2/CO=1 after reduction under flow of hydrogen at 400°C for 4 hours. GC product results show promising FTS performance and stability compared to previously reported Fe-MOF derived catalysts with CO conversion of 96.90% at 340°C for 40 hours and 97.45% at 300°C for 26 hours.

Carbon-based catalysts for Fischer-Tropsch synthesis

Fischer-Tropsch synthesis (FTS) is an essential approach to convert coal, biomass, and shale gas into fuels and chemicals, such as lower olefins, gasoline, diesel, and so on. In recent years, there has been increasing motivation to deploy FTS at commercial scales which has been boosting the discovery of high performance catalysts. In particular, the importance of support in modulating the activity of metals has been recognized and carbonaceous materials have attracted attention as supports for FTS. In this review, we summarised the substantial progress in the preparation of carbon-based catalysts for FTS by applying activated carbon (AC), carbon nanotubes (CNTs), carbon nanofibers (CNFs), carbon spheres (CSs), and metal-organic frameworks (MOFs) derived carbonaceous materials as supports. A general assessment of carbon-based catalysts for FTS, concerning the support and metal properties, activity and products selectivity, and their interactions is systematically discussed. Finally, current challenges and future trends in the development of carbon-based catalysts for commercial utilization in FTS are proposed.

Zeolite-Like Boron Imidazolate Frameworks (BIFs): Synthesis and Application

This review is devoted to discussion of the latest advances in design and applications of boron imidazolate frameworks (BIFs) that are a particular sub-family of zeolite-like metal–organic frameworks family. A special emphasis is made on nanostructured hybrid materials based on BIF matrices and their modern applications, especially in environment remediation and energy conversion.

Adsorption of 2,4-dichlorophenoxyacetic acid in an aqueous medium on nanoscale MIL-53(Al) type materials

MIL-53(Al) type materials were prepared using MW-activation. They show high adsorption capacities in the adsorption of 2,4-dichlorophenoxyacetic acid in an aqueous medium and demonstrate faster adsorption rates as compared to an activated carbon.