Electrocatalytic hydrogen evolution by molecular Cu(II) catalysts

Physicochemical Analysis of Cu(II)-Driven Electrochemical CO2 Reduction and its Competition with Proton Reduction

The reduction of CO2 has become a key role in reducing greenhouse gas emissions in efforts to search for long-term responses to climate change. We report a couple of CO2-reducing molecular catalysts based on earth-abundant copper complexes. These are [Cu(DPA)(PyNAP)] (1) and [Cu(DPA)(PyQl)] (2) (where, DPA=pyridine-2,6-dicarboxylate, PyNAP=2-(pyridin-2-yl)-1,8-naphthyridine, and PyQl=2-(pyridin-2-yl)quinoline). The copper metal-catalysed 2-electron reduction of CO2 to CO in the presence of 2-protons is challenging. These catalysts exhibit the production of CO gas in DMF/water mixtures, achieving an impressive Faradaic efficiency of 84 % and 72 % for complex 1 and 2 at -1.7 V vs. SCE, respectively, for selective CO2 reduction. The production of H2 due to 2H++2e- was also observed as a byproduct through the competitive proton reduction reaction. This was cross-verified by online gas and mass analysis. A comprehensive series of electrochemical experiments have substantiated the homogeneous behaviour exhibited by these molecular electrocatalysts. Our investigations confirmed the stability of the electrocatalysts under the electrocatalytic conditions. The mechanistic pathways were proposed to work with the EECC and ECEC (E: electrochemical and C: chemical) mechanisms. A CO2 insertion into an in-situ generated hydride from the Cu-center generates CO through the favourable path. This critical path kinetically favors excess Faradaic efficiency in 1 than 2, which agrees with the computational investigation.

Deciphering Electrocatalytic Hydrogen Production in Water Through a Bioinspired Water-Stable Copper(II) Complex Adorned with (N2S2)-Donor Sites

Electrocatalytic hydrogen production stands as a pivotal cornerstone in ushering the revolutionary era of the hydrogen economy. With a keen focus on emulating the significance of hydrogenase-like active sites in sustainable H2 generation, a meticulously designed and water-stable copper(II) complex, [Cl-Cu-LN2S2]ClO4, featuring the N,S-type ligand, LN2S2 (2,2'-((butane-2,3-diylbis(sulfanediyl))bis(methylene))dipyridine), has been crafted and assessed for its prowess in electrocatalytic H2 production in water, leveraging acetic acid as a proton source. The molecular catalyst, adopting a square pyramidal coordination geometry, undergoes -Cl substitution by H2O during electrochemical conditions yielding [H2O-Cu-LN2S2]2+ as the true catalyst, showcases outstanding activity in electrochemical proton reduction in acidic water, achieving an impressive rate of 241.75 s-1 for hydrogen generation. Controlled potential electrolysis at -1.2 V vs. Ag/AgCl for 1.6 h reveals a high turnover number of 73.06 with a commendable Faradic efficiency of 94.2 %. A comprehensive analysis encompassing electrochemical, spectroscopic, and analytical methods reveals an insignificant degradation of the molecular catalyst. However, the post-CPE electrocatalyst, present in the solution domain, signifies the coveted stability and effective activity under the specified electrochemical conditions. The synergy of electrochemical, spectroscopic, and computational studies endorses the proton-electron coupling mediated catalytic pathways, affirming the viability of sustainable hydrogen production.

Copper-based electrocatalyst for hydrogen evolution in water

In aqueous pH 7 phosphate buffer, during controlled potential electrolysis (CPE) at -1.10 V vs. Ag|AgCl the literature square planar copper complex, [CuIILEt]BF4 (1), forms a heterogeneous deposit on the glassy carbon working electrode (GCWE) that is a stable and effective hydrogen evolution reaction (HER) electrocatalyst. Specifically, CPE for 20 hours using a small GCWE (A = 0.071 cm2) gave a turnover number (TON) of 364, with ongoing activity. During CPE the brownish-yellow colour of the working solution fades, and a deposit is observed on the small GCWE. Repeating this CPE experiment in a larger cell with a larger GCWE (A = 2.7 cm2), connected to a gas chromatograph, resulted in a TON of 2628 after 2.6 days, with FE = 93%, and with activity ongoing. After this CPE, the working solution had faded to nearly colourless, and visual inspection of the large GCWE showed a material had deposited on the surface. In a 'rinse and repeat test', this heterogeneous deposit was used for further CPE, in a freshly prepared working solution minus fresh catalyst, which resulted in similar ongoing HER activity to before, consistent with the surface deposited material being the active HER catalyst. EDS, PXRD and SEM analysis of this deposit shows that copper and oxygen are the main components present, most likely comprising copper and copper(I) oxide ((Cu2O)n) formed from 1. The use of 1 leads to a deposit that is more catalytically active than that formed when starting with a simple copper salt (control), likely due to it forming a more robustly attached deposit, which also enables the observed long-lived catalytic activity.

Formate dehydrogenase activity by a Cu(II)-based molecular catalyst and deciphering the mechanism using DFT studies

Due to the requirement to establish renewable energy sources, formic acid (FA), one of the most probable liquid organic hydrogen carriers (LOHCs), has received great attention. Catalytic formic acid dehydrogenation in an effective and environmentally friendly manner is still a challenge. The N3Q3 ligand (N3Q3 = N,N-bis(quinolin-8-ylmethyl)quinolin-8-amine) and the square pyramidal [Cu(N3Q3)Cl]Cl complex have been synthesised in this work and characterised using several techniques, such as NMR spectroscopy, mass spectrometry, EPR spectroscopy, cyclic voltammetry, X-ray diffraction and DFT calculations. This work investigates the dehydrogenation of formic acid using a molecular and homogeneous catalyst [Cu(N3Q3)Cl]Cl in the presence of HCOONa. The mononuclear copper complex exhibits catalytic activity towards the dehydrogenation of formic acid in H2O with the evolution of a 1 : 1 CO2 and H2 mixture. The activation energy of formic acid dehydrogenation was calculated to be Ea = 86 kJ mol-1, based on experiments carried out at various temperatures. The Gibbs free energy was found to be 82 kJ at 298 K for the decomposition of HCOOH. The DFT studies reveal that [Cu(N3Q3)(HCOO-)]+ undergoes an uphill process of rearrangement followed by decarboxylation to generate [Cu(N3Q3)(H-)]+. The initial uphill step for forming a transition state is the rate-determining step. The [Cu(N3Q3)(H-)]+ follows an activated state in the presence of HCOOH to liberate H2 and generate the [Cu(N3Q3)(OH2)]2+.

Electrocatalytic hydrogen evolution by a dinuclear copper complex and mechanistic elucidation through DFT studies

A novel dinuclear copper complex, [CuII2(L1)2] (L1 = 2-{[2-(8-hydroxyquinolin-2-yl)-1H-benzimidazol-1-yl]methyl}quinolin-8-ol) was synthesised and characterised through various spectroscopic techniques. This dinuclear complex (as an electrocatalyst) was employed to examine the catalytic ability towards an electrochemical hydrogen evolution reaction (HER). Redox studies in 95/5 (v/v) DMF/H2O with the addition of 30-equivalent AcOH (acid source) led to higher catalytic activities for the HER. The evolved H2, as the resultant product, was detected and confirmed from gas chromatography to afford a faradaic efficiency of 93% at an applied potential of -1.9 V vs. SCE. Based upon measurements of open-circuit potential and electrocatalytic responses, the mechanistic route for the reduction process using [CuII2(L1)2] was elucidated. Density functional theory studies reveal that through a concerted proton-coupled electron transfer (PCET) path, the HER proceeded via the formation of a Cu-H bond with a low activation energy for the dehydrogenation reaction.

Non-Metallic Phosphorus Corrole as Efficient Electrocatalyst in Hydrogen Evolution Reaction

The economical consideration of using an electrocatalyst in energy-related field, composed of non-precious/sustainable elements is quite noteworthy. In this work, the phosphorus(V) complex of tris-(pentafluorophenyl)corrole [(TPFC)P^V (OH)₂ ] was reported as electrocatalyst for the hydrogen evolution reaction (HER). The electrochemical studies revealed that the HER experienced a ECEC pathway (E: electron transfer step, C: chemical step), and the possible intermediate [P^V ]-H species was suggested. (TPFC)P^V (OH)₂ displayed excellent HER activity in dimethylformamide (DMF) with trifluoroacetic acid (TFA) as the proton source, and the turnover frequency (TOF) reached 31.75 s^-1 at an overpotential of 900 mV. Interestingly, the HER electrocatalytic performance remained extraordinary even applying water as a proton source in acetonitrile/water (v/v=2 : 3), with a TOF of 18.40 mol H 2 ${{_{{\rm H}{_{2}}}}}$  mol_cat ^-1  h^-1 at an overpotential of 900 mV.