Carboxymethylation of hemicelluloses isolated from sugarcane bagasse

Rheology and gelation of aqueous carboxymethylated curdlan solution: Impact of the degree of substitution

Curdlan is a unique (1,3)-β-D-glucan with bioactivity and exceptional gelling properties. By chemical functionalization such as carboxymethylation, the physicochemical properties of curdlan can be significantly tailored. However, how the carboxymethylation extent of curdlan affects its rheology and gelation characteristics has yet to be fully understood. Herein, we investigated the impact of the degree of substitution (DS, ranging from 0.04 to 0.97) on the rheological and gelation behavior of carboxymethylated curdlan (CMCD). It was found that CMCD with DS below 0.20, resembling native curdlan, still retained its gelling capability. As the DS increased beyond 0.36, there was a significant increase in its water solubility instead of gelation, resulting in transparent solutions with steady/complex viscosities adhering to the Cox-Merz rule. Moreover, CMCD with high DS demonstrated the ability to undergo in-situ gelation in the presence of metal ions, attributed to the nonspecific electrostatic binding. Additionally, in vitro cytocompatibility testing showed positive compatibility across varying DS in CMCD. This research offers a holistic understanding of the viscosifying and gelling behaviors of CMCD with varying DS, thereby fostering their practical application as thickeners and gelling agents in fields ranging from food and biomedicine to cosmetics and beyond.

High stretchable and tough xylan-g-gelatin hydrogel via the synergy of chemical cross-linking and salting out for strain sensors

Stretchable and tough hydrogels have been extensively used in tissue engineering scaffolds and flexible electronics. However, it is still a significant challenge to prepare hydrogels with both tensile strength and toughness by utilizing xylan, which is abundant in nature. Herein, we present a novel hydrogel of carboxymethyl xylan(CMX) graft gelatin (G) and doped with conductive hydroxyl carbon nanotubes (OCNT). CMX and G are combined through amide bonding as well as intermolecular hydrogen bonding to form a semi-interpenetrating hydrogel network. The hydrogel was further subjected to salting-out treatment, which induced the aggregation of the CMX-g-G molecular chain and the formation of chain bundles to toughen the hydrogel, the tensile strain, tensile stress, and toughness of CMX-g-G hydrogels were 1.547 MPa, 324 %, and 2.31 MJ m-3, respectively. In addition, OCNT was used as a conductive filler to impart electrical conductivity and further improve the mechanical properties of CMX-g-G/OCNT hydrogel, and a tensile strength of 1.62 MPa was obtained. Thus, the synthesized CMX-g-G/OCNT hydrogel can be used as a reliable and sensitive strain sensor for monitoring human activity. This study opens up new horizons for the preparation of xylan-based high-performance hydrogels.

Confinement-Modulated Clusterization-Triggered Time-Dependent Phosphorescence Color from Xylan-Carbonized Polymer Dots

Achieving time-dependent phosphorescence color (TDPC) in organic materials is attractive but extremely challenging due to the nonradiative decay and modulation puzzle of triplet state. Herein, xylan, a hemicellulose waste from the paper mill, was used to construct carbonized polymer dots (CPDs) with clusterization-triggered room-temperature phosphorescence (RTP). CPDs were endowed with tuneable triplet energy levels by through-space conjugation of heteroatom groups, which could be confined in silica to simultaneously activate surface oxide-related low-energy and cross-linked core N-related high-energy emissive centers. Thus, the blue emissive center with a lifetime of 425.6 ms and green emissive center with a longer lifetime of 1506 ms coexisted in the confined CPDs; the former was the dominant contribution to RTP at first, and the latter became dominant over time, leading to a typical TDPC evolution with large color contrast from blue to blue-green and then to green. Meanwhile, the TDPC could remain unobstructed after the confined CPDs were soaked in water for more than a month. The CPDs were successfully applied in location and deformation imaging of hydrogel and advanced dynamic information encryption and anticounterfeiting. The work may shed new light on the design of TDPC materials and broaden the high-value use of paper-mill waste xylan.

Preparation and characterization of hemicellulose films reinforced with amino polyhedral oligomeric silsesquioxane for biodegradable packaging

Biomass is one of the powerful alternatives to petroleum-based packaging materials. Herein, carboxymethyl hemicellulose (CMH) based films (CPF) were prepared using a convenient strategy. The chains of CMH provided the necessary supporting matrix, and the aminopropyl polyhedral oligomeric silsesquioxane (POSS-NH2) regulated the thermal and barrier properties of the CPF. The secondary amide groups and hydrogen bond were appeared in chemical structure, and SEM-EDS results indicated the preferable dispersion and compatibility of POSS-NH2 in CPFs. The thermal degradation temperature (Tonset > 260 °C), the coefficient of linear thermal expansion and glass transition temperature (Tg > 130 °C) have been improved by introduction of POSS-NH2. The tensile strength of CPF showed a higher level of 39.43 MPa with the POSS-NH2 loading of 20 wt%, which was 18.8 % higher than that of CMH film. More importantly, water vapor barrier property of films almost improved by two times, and its value is reduced to 18.82 g m-2 h-1. The shelf life of blueberry was effectively extended by the CPF coating for one week compared with commercial PE film. Therefore, CPF films displayed effective thermal performances, water vapor barrier characteristic and biodegradability, which might be exploited in packaging material for food application.

Solvent-less carboxymethylation-induced electrostatic crosslinking of chitosan

The successful N-carboxymethylation and concomitant crosslinking of solid chitosan upon heating its mixture with solid monochloroacetic acid, without the use of solvents or catalysts, is reported. The N-carboxymethylation was confirmed through the analysis of the partially depolymerized product using NMR spectroscopy, as well as a control reaction with lysine. This transformation was facilitated by the nucleophilic nature of the free amine group in the repeating unit of chitosan, which possesses lone pair of electrons capable of attacking the carbon center bearing the leaving group and displacing the leaving group in a concerted manner. The crosslinking, on the other hand, was established by the observed insolubility in aqueous acidic solutions, even when subjected to prolonged heating at 60 °C. This crosslinking occurs due to the electrostatic interactions between the carboxylate groups and the adjacent ammonium groups, as supported by evidence from FTIR spectroscopy and a control reaction involving ethyl chloroacetate. The resulting crosslinked carboxymethyl chitosan demonstrated its usefulness in the adsorption of methyl orange and fluorescein, as well as functioning as an organic catalyst for aza-Michael addition, Hantzsch reaction, and substituted perimidine synthesis.

Synthesis and its biological activity of carboxymethyl hemicellulose p-hydroxybenzoate (P-CMHC)

Hemicellulose extracted from ecalyptus APMP pulping waste liquor and undergoes etherification modification to produce carboxymethyl hemicellulose (CMHC). Subsequently, CMHC undergoes esterification reaction with p-hydroxybenzoic acid to synthesize a novel polysaccharide-based preservative known as carboxymethyl hemicellulose p-hydroxybenzoate (P-CMHC). The synthesis conditions of P-CMHC were optimized using the response surface methodology, resulting in an optimal esterification condition that achieved a degree of substitution of 0.232. P-CMHC exhibits excellent antioxidant activity, including 2,2-diphenyl-1-picrylhydrazyl (DPPH) and hydroxyl radical scavenging activities. Additionally, it demonstrates favorable hygroscopic and moisturizing properties. Thiazole blue (MTT) experiments evaluating cell proliferation rate indicate that P-CMHC possesses negligible cytotoxicity, making it a promising, safe, and healthy preservative. Consequently, it can be considered as a new material for applications in the fields of biomedicine, food, and cosmetics.

Carboxymethylated Rhizoma alismatis Polysaccharides Regulate Calcium Oxalate Crystals Growth and Reduce the Regulated Crystals' Cytotoxicity

OBJECTIVE

This study explored the effects of polysaccharides (RAPD) extracted from the traditional anti-stone Chinese medicine Rhizoma alismatis and their carboxymethylated derivatives (RAPs) on the crystal phase, morphology, and size of calcium oxalate (CaOx). It also determined the damaging ability of the regulated crystals on human renal tubular epithelial cells (HK-2).

METHODS

RAPD carboxymethylation with a carboxyl group (-COOH) content of 3.57% was carried out by the chloroacetic acid solvent method. The effects of -COOH content in RAPs and RAP concentration on the regulation of CaOx crystal growth were studied by controlling the variables. Cell experiments were conducted to explore the differences in the cytotoxicity of RAP-regulated crystals.

RESULTS

The -COOH contents of RAPD, RAP1, RAP2, and RAP3 were 3.57%, 7.79%, 10.84%, and 15.33%, respectively. RAPs can inhibit the growth of calcium oxalate monohydrate (COM) and induce the formation of calcium oxalate dihydrate (COD). When the -COOH content in RAPs was high, their ability to induce COD formation was enhanced. In the crystals induced by RAPs, a high COD content can lower the damage to cells. In particular, the cytotoxicity of the crystals induced by RAP3 was the lowest. When the concentration of RAP3 increased, the cytotoxicity gradually increased due to the reduced size of the formed COD crystals. An interaction was observed between RAPs and crystals, and the number of RAPs adsorbed in the crystals was positively correlated with the -COOH content in RAPs.

CONCLUSIONS

RAPs can reduce the damage of CaOx to HK-2 cells by regulating the crystallization of CaOx crystals and effectively reducing the risk of kidney stone formation. RAPs, especially RAP3 with a high carboxyl group content, has the potential to be developed as a novel green anti-stone drug.

Isolation and Extraction of Monomers from Insoluble Dietary Fiber

Insoluble dietary fiber is a macromolecular polysaccharide aggregate composed of pectin, glycoproteins, lignin, cellulose, and hemicellulose. All agricultural by-products contain significant levels of insoluble dietary fiber. With the recognition of the increasing scarcity of non-renewable energy sources, the conversion of single components of dietary fiber into renewable energy sources and their use has become an ongoing concern. The isolation and extraction of single fractions from insoluble dietary fiber is one of the most important recent research directions. The continuous development of technologies for the separation and extraction of single components is aimed at expanding the use of cellulose, hemicellulose, and lignin for food, industrial, cosmetic, biomedical, and other applications. Here, to expand the use of single components to meet the new needs of future development, separation and extraction methods for single components are summarized, in addition to the prospects of new raw materials in the future.

Hemicellulose-based hydrogels for advanced applications

Hemicellulose-based hydrogels are three-dimensional networked hydrophilic polymer with high water retention, good biocompatibility, and mechanical properties, which have attracted much attention in the field of soft materials. Herein, recent advances and developments in hemicellulose-based hydrogels were reviewed. The preparation method, formation mechanism and properties of hemicellulose-based hydrogels were introduced from the aspects of chemical cross-linking and physical cross-linking. The differences of different initiation systems such as light, enzymes, microwave radiation, and glow discharge electrolytic plasma were summarized. The advanced applications and developments of hemicellulose-based hydrogels in the fields of controlled drug release, wound dressings, high-efficiency adsorption, and sensors were summarized. Finally, the challenges faced in the field of hemicellulose-based hydrogels were summarized and prospected.

Antimicrobial food packaging composite films prepared from hemicellulose/polyvinyl alcohol/potassium cinnamate blends

Hemicellulose and its derivatives have attracted extensive attention as packaging materials and various methods have been utilized to improve its film formation properties. To make use of the byproduct in dissolving pulp production, hemicellulose collected from waste water was modified by carboxymethylation and blended with polyvinyl alcohol (PVA) to prepare composite film by solution casting method. Potassium cinnamate (PC) was further incorporated to endow the film with antibacterial activity. The properties of the composite films were characterized. Due to the good compatibility and intermolecular interactions, the composite film exhibited moderate oxygen barrier property (3.64-12.21 cm³ μm m^-2 d^-1 KPa^-1). The flexibility of the film was improved compared with pure PVA film although tensile strength was decreased. The film had good UV barrier properties and good antibacterial properties due to the introduction of PC. GAB model could be used to predict moisture sorption of the composite films. Moreover, the obtained film showed good performance in cherry tomato preservation. This work provided a prospective route for utilization of hemicellulose recovered from waste water for high value-added products.

Hemicellulose Films from Curaua Fibers (Ananas erectifolius): Extraction and Thermal and Mechanical Characterization

With growing environmental concerns over synthetic polymers, natural polymeric materials, such as hemicellulose, are considered a good sustainable alternative. Curaua fibers could be an excellent source of biopolymer as they have a relatively high hemicellulose content (15 wt%) and only a small amount of lignin (7 wt%). In this work, hemicellulose was extracted by an alkaline medium using KOH and the influence of the alkali concentration, temperature, and time was studied. A hemicellulose film was produced by water casting and its mechanical, thermal, and morphological properties were characterized. The results show that the best method, which resulted in the highest hemicellulose yield and lowest contamination from lignin, was using 10% (w/v) KOH concentration, 25 °C, and time of 3 h. The hemicellulose film exhibited better thermal stability and elongation at break than other polymeric films. It also exhibited lower rigidity and higher flexibility than other biodegradable polymers, including polylactic acid (PLA) and polyhydroxybutyrate (PHB).

Self-Standing, Photothermal-Actuating, and Motion-Monitoring Janus Films One-Pot Synthesized by Green Carboxymethyl Glucomannan/Liquid Metal Nanoinks

Downsizing bulk liquid metals (LM) at the nanometer scale with biocompatibility and multifunction is a key process for electronic or medical applications. Here, we report a stable and green LM aqueous colloidal ink by wrapping eutectic gallium-indium alloys (EGaIn) with carboxymethyl glucomannan (CGM) derived from radiata pine chip, which is capable of being prepared into a free-standing, photothermal-actuating, and motion-monitoring Janus film. With the assistance of CGM, the bulk EGaIn was ultrasonicated into stable nanodroplets (∼500 nm) with a typical "core-shell" structure, in which the colloidal inks can be stored for more than 1 week under room temperature. The stable CGM/EGaIn inks can be patterned on different substrates to form coating layers or self-assembled into free-standing Janus films with high mechanical strength and modulus (∼94 MPa and ∼3.8 GPa) by density deposition. Such a Janus film with anisotropic thermal conductivity made it a potential photothermal actuator. In addition, the biocompatible film demonstrated both high conductivity and large resistance variation in response to strain change (gauge factor >500), allowing for human motion monitoring. This work provides a new prospect for the development of biocompatible and high-performance nano-LM materials.

Experimental Study of Bentonite-Free Water Based Mud Reinforced with Carboxymethylated Tapioca Starch: Rheological Modeling and Optimization Using Response Surface Methodology (RSM)

Drilling mud’s rheological characteristics, such as plastic viscosity and yield point, are adversely affected with an inappropriate mud formulation. Native starch is one of the most important components in water-based mud because it improves the rheological and filtration characteristics of the mud. The native starch stability under various temperature and exposure time regimes is an important concern for utilizing starch in oil and gas drilling operations. In this work, tapioca starch was modified using carboxymethylation for the first time in order to improve its performance in non-damaging water-based muds. The modified starch was characterized by Fourier-transform infrared spectroscopy and X-ray diffraction. The thermal stability was tested using thermal gravimetric analysis. Various mud blends were formulated based on the experimental design using response surface methodology (RSM) to investigate their performance at various temperature conditions. Thirty experimental runs were carried out based on the selected factors and responses considering the optimal (custom) design, and the results were analyzed through ANOVA. The Fourier-transform infrared spectroscopy and X-ray diffraction results confirmed the carboxymethylation of starch. The TGA analysis revealed strong thermal stability after modification. Additionally, the Power law model (PLM) described the obtained rheological data for the selected formulations, resulting in determination coefficients of more than 0.95. Furthermore, the examined samples showed a reduction in the flow behavior index from 0.30 to 0.21 and an increase in the consistency index from 5.6 to 15.1. Optimization and confirmation results revealed the adequacy of the generated empirical models for both plastic viscosity and yield point. The obtained consistency index values provided a direct relationship with the modified starch concentration, indicating an improvement in the cutting carrying capacity of mud. Based on the current literature survey, the studied formulation has not been reported in the literature.

Sugarcane bagasse: a biomass sufficiently applied for improving global energy, environment and economic sustainability

Sugarcane (Saccharum officinarum) bagasse (SCB) is a biomass of agricultural waste obtained from sugarcane processing that has been found in abundance globally. Due to its abundance in nature, researchers have been harnessing this biomass for numerous applications such as in energy and environmental sustainability. However, before it could be optimally utilised, it has to be pre-treated using available methods. Different pre-treatment methods were reviewed for SCB, both alkaline and alkali-acid process reveal efficient and successful approaches for obtaining higher glucose production from hydrolysis. Procedures for hydrolysis were evaluated, and results indicate that pre-treated SCB was susceptible to acid and enzymatic hydrolysis as > 80% glucose yield was obtained in both cases. The SCB could achieve a bio-ethanol (a biofuel) yield of > 0.2 g/g at optimal conditions and xylitol (a bio-product) yield at > 0.4 g/g in most cases. Thermochemical processing of SCB also gave excellent biofuel yields. The plethora of products obtained in this regard have been catalogued and elucidated extensively. As found in this study, the SCB could be used in diverse applications such as adsorbent, ion exchange resin, briquettes, ceramics, concrete, cement and polymer composites. Consequently, the SCB is a biomass with great potential to meet global energy demand and encourage environmental sustainability.

Rapid fabrication of xylan-based hydrogel by graft polymerization via a dynamic lignin-Fe3+ plant catechol system

Traditional preparation methods of the hydrogel are not only tedious but also requiring external stimuli. Here, a plant catechol-inspired self-catalytic system (sulfonated lignin and iron ion) has been introduced to rapidly trigger the graft polymerization of vinyl monomers on the carboxymethyl xylan (CMX) at room temperature, generating an elastic, UV-shield, and conductive hydrogel. The rapid preparation process can be finished at room temperature in 5 min without the removal of oxygen. The hydrogel shows charming extension ratio (up to 460%) and tensile stress (up to 23 kPa), which can be ascribed to the double network structure constructed from Fe³⁺ and CMX. The hydrogel exhibits great transparency (up to 85.37%), fascinating UV-blocking (up to 99%), and conductive features, thereby serving as potential human body sensors. The rapid preparation of xylan-derived hydrogels via dynamic lignin catechol chemistry may open up a new approach to high-valued utilization of biomass.

Carboxymethylation of polysaccharide isolated from Alkaline Peroxide Mechanical Pulping (APMP) waste liquor and its bioactivity

In recent years, the biological activity of polysaccharides and their derivatives has been widely studied. However, in addition to the natural polysaccharides directly extracted from plants and animals, there are rich polysaccharides in the pulping waste liquor that have not been fully utilized. The extracted polysaccharide from eucalyptus Alkaline Peroxide Mechanical Pulping (APMP) waste liquor was used as a raw material. For the production of carboxymethyl polysaccharide, the effects of temperature (T), the amount of alkali (NaOH) and the amount of etherifying agent (ClCH₂COOH) on the degree of substitution (DS) were investigated, the optimal preparation conditions are: reaction time 2 h, temperature 75 °C, and the molar ratio of polysaccharide, NaOH and ClCH2COOH is 1:1:2, the highest DS is 1.47; FT-IR, NMR and GPC were used to characterize the structure and Molecular weight, the results show that the polysaccharide of APMP waste liquor is rich in xylan, and it was proved that the carboxymethyl substitution was successful and the positions of the substituent group were determined. The characterization and biological activity research of xylan polysaccharide (XP) and carboxymethyl xylan polysaccharide (CMXP), such as antioxidation, moisture absorption/retention, bacteriostatic action and cytotoxicity were discussed. CMXP shows better effects compared with XP.

Structural characterization and antioxidant activity of an acetylated Cyclocarya paliurus polysaccharide (Ac-CPP0.1)

The aim of this study was to investigate the primary structure of an acetylated Cyclocarya paliurus polysaccharide (Ac-CPP_0.1) and its protective effect on H₂O₂-treated dendritic cells. The backbone of Ac-CPP_0.1 was →3)-β-D-Galp-(1→, with some branches α-L-Araf-(1→ residues at O-6 and O-5, β-D-Galp-(1→ and 3,5,6)-β-D-Galf-(1 residues at O-4 and acetyl groups were substituted at the O-2 and O-6 positions of 3)-β-D-Galp-(1 residues. The CPP_0.1 and Ac-CPP_0.1 significantly increased the levels of superoxide dismutase, glutathione peroxidase and catalase on H₂O₂-treated dendritic cells. Meanwhile, both CPP_0.1 and Ac-CPP_0.1 up-regulated the expression of Nrf2 (NF-E2-related factor 2) and down-regulated the Keap1 (Kelch-like ECH-associated protein-1), but Ac-CPP_0.1 had a better effect on antioxidant capacity. These results indicated that potential application of Ac-CPP_0.1 as an antioxidant agent.

Fabrication of flexible composite film based on xylan from pulping process for packaging application

To realize the application of xylan based film in food and drug packaging, the poor mechanical property and film-forming property of xylan based film must be overcome. Herein, a good oxygen barrier composite film with desired mechanical properties was prepared based on carboxymethly xylan (CMX), chitosan (CS), and graphene oxide (GO). The results of scanning electron microscope revealed the composite film had a dense and continuous structure, which will endow the composite film with excellent mechanical property. As expected, the composite film with the 0.5% mass fraction of GO exhibited best mechanical property, among which the tensile stress, tensile strain, and Young's modulus of the composite film reached 50.81 MPa, 47.61%, and 1.39 GPa, respectively. The oxygen barrier properties of the composite films significantly increased with the addition of graphene oxide due to the dense, stacked multilayer structure. In addition, these composite films exhibited good antibacterial properties. Therefore, these films show great promise in the field of food packaging and wound dressing due to their excellent mechanical, oxygen barrier and antibacterial properties.

Preparation and characterization of pH-responsive microgel using arabinoxylan from wheat bran for BSA delivery

Wheat bran arabinoxylan (AX) discard from wheat production was utilized to form pH-responsive microgels. AX was modified by carboxymethylation, and the carboxymethylated arabinoxylans (CMAX) were characterized by FT-IR, NMR, gel permeation chromatography (GPC), and rheological analysis. The CMAX microgel was cross-linked by Fe³⁺ using an inverse emulsification polymerization. The morphology, particle size, pH sensitivity, and mechanism of cross-linking between COO^- and Fe³⁺ of the CMAX microgel was investigated. The CMAX microgel was used to be an oral protein drug carrier. The CMAX microgel particles exhibited a stable spherical structure. FT-IR spectral analysis of the CMAX microgel indicated that the microgel was crosslinked by bridging Fe³⁺ and COO^- with unidentate binding. The CMAX microgel exhibited good pH sensitivity and high stability in acid condition. Additionally, BSA was used as the embedding protein, and the controlled release effect of CMAX microgel was explored in gastrointestinal tract simulation.

Valorization of industrial xylan-rich hemicelluloses into water-soluble derivatives by in-situ acetylation in EmimAc ionic liquid

In this study, aimed at valorization of industrial xylan-rich hemicelluloses (a by-product of dissolving pulp process), water-soluble hemicelluloses were fabricated with mild acetylation in 1-ethyl-3-methylimidazolium acetate ionic liquid (EmimAc) and dichloroacetyl chloride (Cl₂AcCl) system by a facile and novel method. The structure of the acetylated hemicelluloses was characterized by FT-IR and NMR spectra. The resultant modified products could fully dissolve in water with the degree of substitution (DS) valued between 0.17 and 0.37. Structural characterization indicated that the modified hemicelluloses were chiefly composed of the (1 → 4)-linked β-D-Xylp backbone with hydroxyl or -COCH₃ linked to O-2 and O-3 of the Xylp units. Moreover, the mild acetylation was achieved by one-pot method, in which the hemicelluloses reacted with mixed anhydride produced between EmimAc and Cl₂AcCl rather than Cl₂AcCl. Rheological behavior measurements revealed that acetylated hemicelluloses solutions showed shear-thinning behavior and indicated lower viscosity compared with those of the referenced hemicelluloses. The excellent water-solubility of industrial hemicelluloses would widen its application field and be easier for its conversion into desired chemicals.

Physicochemical properties and antioxidant activity of pectin from hawthorn wine pomace: A comparison of different extraction methods

In the paper, to enhance the value and utilization rate of hawthorn wine pomace waste, four kinds of pectin were gained from hawthorn wine pomace by hydrochloric acid method (HA-HP), citric acid method (CA-HP), cellulase method (E-HP) and microwave-assisted chelating agent method (MH-HP). The physical and chemical properties of extracted hawthorn pectin were analyzed, however, different extraction methods lead to different characteristics of extracted pectin samples. We found that the extracted hawthorn pectin was all low-methoxy pectin, and the highest extraction yield of 72.89% with high ash (9.20%) was obtained by the MH-HP method, while the galacturonic acid (Gal A) content was up to 72.24% after dealing with the CA-HP method which was the highest among the four samples, besides, the quality of gel formed by E-HP method was the best. What's more, the four extracted samples all reveled degrees of antioxidant activity with dose-dependent in vitro antioxidant, and it was CA-HP method had the best antioxidant activity, making this the first comprehensive research describing the extracting pectin from hawthorn wine pomace. This research also provides a base for industrial production of high-value products from low-cost raw materials.

Lignocellulosic Biomass Derived Functional Materials: Synthesis and Applications in Biomedical Engineering

The pertinent issue of resources shortage arising from global climate change in the recent years has accentuated the importance of materials that are environmentally friendly. Despite the merits of current material like cellulose as the most abundant natural polysaccharide on earth, the incorporation of lignocellulosic biomass has the potential to value-add the recent development of cellulose-derivatives in drug delivery systems. Lignocellulosic biomass, with a hierarchical structure is comprised of cellulose, hemicellulose and lignin. As an excellent substrate that is renewable, biodegradable, biocompatible and chemically accessible for modified materials, lignocellulosic biomass sets forth a myriad of applications. To date, materials derived from lignocellulosic biomass have been extensively explored for new technological development and applications, such as biomedical, green electronics and energy products. In this review, chemical constituents of lignocellulosic biomass are first discussed before we critically examine the potential alternatives in the field of biomedical application. In addition, the pretreatment methods for extracting cellulose, hemicellulose and lignin from lignocellulosic biomass as well as their biological applications including drug delivery, biosensor, tissue engineering etc. are reviewed. It is anticipated there will be an increasing interest and research findings in cellulose, hemicellulose and lignin from natural resources, which help provide important directions for the development in biomedical applications.

Preparation and Coagulation Performance of Carboxypropylated and Carboxypentylated Lignosulfonates for Dye Removal

In this work, 1-carboxypropyled (1-CPRLS) and 5-carboxypentyled lignosulfonates (5-CPELS) were synthesized using 2-chlorobutanoic acid and 6-chlorohexanoic acid as carboxylate group donors via S_N1 and S_N2 mechanisms, respectively. 1-Carboxypropyl and 5-carboxypentyl lignosulfonates with the charge densities of −3.45 and −2.94 meq g⁻¹ and molecular weights of 87,900 and 42,400 g·mol⁻¹ were produced, respectively, under mild conditions. The carboxylate content and degree of substitution (DS) of the 1-CPRLS product were 2.37 mmol·g⁻¹ and 0.70 mol·mol⁻¹, while those of 5-CPELS products were 2.13 mmol·g⁻¹ and 0.66 mol·mol⁻¹, respectively. The grafting of carboxypropyl and carboxypentyl groups to lignosulfonate was confirmed by Fourier transform infrared (FT-IR) and nuclear magnetic resonance (¹H-NMR and ¹³C-NMR) spectroscopies. In addition, 1-CPRLS and 5-CPELS were applied as coagulants for removing ethyl violet (EV) dye from a simulated solution, and their performance was related to their charge densities and molecular weights. Furthermore, fundamental discussion is provided on the advantages of (1) producing 1-CPRLS and (2) the superior properties and performance of 1-CPRLS to carboxyethylated lignosulfonate.

Methacrylic acid/butyl acrylate onto feruloylated bagasse xylan: Graft copolymerization and biological activity

In this paper, feruloylated bagasse xylan (FBX) was synthesized with a method based on homogeneous catalytic esterification of bagasse xylan (BX) with ferulic acid (FA) in the presence of triethylamine as a catalyst, and it was further grafted with methacrylic acid (MAA) and butyl acrylate (BA) to synthesize FBX-g-MAA/BA grafted copolymer by using ammonium persulfate as initiator and N,N-methylene acrylamide as cross-linker. The effects of reaction variables including reaction time, temperature and reactant concentration on the esterification and graft reactions were investigated carefully by conducting orthogonal tests. A maximum degree of substitution (DS) of 1.76 for the esterification and a maximum graft ratio (GR) of 31% can be achieved by performing the reaction at optimized reaction parameters. The molecular docking was further performed to study the binding mode of the final product into the active site of human Caprin-2 C1q domain (4OUM, cause gastric cancer protein), liver cancer protein (1UV0) and lung cancer protein (3B9S). The software generated results were in satisfactory agreement with the evaluated biological activity. The anticancer performances of BX, FBX and FBX-g-MAA/BA copolymer were investigated by using a 3-(4,5-dimethythiazol-2-yl)-2,5-diphenyl tetrazoliumbromide (MTT) method. The results indicated that the inhibition ratio of FBX-g-MAA/BA copolymer on BEL-7407 (liver cancer cells) can reach 25.28% ± 4.01%, which is two times higher than that of BX.

Synthesis and Characterization of Carboxyethylated Lignosulfonate

Lignosulfonate is a byproduct of the sulfite pulping process and has limited use in industry. The main objective of this study was to investigate the carboxyethylation of lignosulfonate to increase its charge density to broaden its applications. The carboxyethylation of lignosulfonate was optimized under the conditions of 30 wt % NaOH, 2.0 mol mol^-1 2-chloropropinic acid/lignosulfonate, 90 °C, 0.5 h, and 0.03 mol 2-chloropropinic acid, which produced carboxyethylated lignosulfonate with a charge density and molecular weight of -3.51 meq g^-1 and 46 493 g mol^-1 , respectively. The mechanism of the carboxyethylation reaction using 2-chloropropinic acid by an S_N 1 pathway in an alkaline solution was discussed. Methylation was also used to mask the phenolic hydroxide groups of lignosulfonate to investigate if carboxyethylation occurred on aliphatic hydroxide groups of lignosulfonate. The produced carboxyethylated lignosulfonate was characterized by using FTIR spectroscopy, NMR spectroscopy, gel permeation chromatography, and elemental and functional group analyses. Basic ¹ H-¹ H 2 D COSY NMR spectroscopy was used to record the coupled spins of the carboxyethyl group on carboxyethylated lignosulfonate. The information from 1 D ¹ H NMR and 2 D NMR COSY spectroscopy provided evidence for the existence of a 1-carboxyethyl group on the carboxyethylated lignosulfonate structure.

Investigation of the Thermo-Mechanical Properties of Blend Films Based on Hemicelluloses and Cellulose

This study presents an effective and convenient approach to prepare blend films with enhanced mechanical and thermodynamic properties by incorporation of carboxymethyl cellulose (CMC) into quaternized hemicelluloses (QH). The structures and properties of films were analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and tensile testing, respectively. From the SEM pictures, tight, homogeneous, and smooth surfaces of films were obtained. In addition, the transparencies of the blend films were increased with the increasing of CMC content. The results of mechanical properties indicated that the blend film prepared from QH and CMC (1 : 2 m/m) had a tensile strength of 65.2 MPa. It suggested that the addition of CMC was contributed to mechanical properties by strong electrostatic interactions and the enhanced hydrogen bondings with QH. These results provide insights into the understanding of the structural relationships of bioblend films in coating and packaging application.

Carbon Nanotubes Reinforced Maleic Anhydride-Modified Xylan-g-Poly(N-isopropylacrylamide) Hydrogel with Multifunctional Properties

Introducing multifunctional groups and inorganic material imparts xylan-based hydrogels with excellent properties, such as responsiveness to pH, temperature, light, and external magnetic field. In this work, a composite hydrogel was synthesized by introducing acid treated carbon nanotubes (AT-CNTs) into the maleic anhydride modified xylan grafted with poly(N-isopropylacrylamide) (MAX-g-PNIPAM) hydrogels network. It was found that the addition of AT-CNTs affected the MAX-g-PNIPAM hydrogel structure, the swelling ratio and mechanical properties, and imparted the hydrogel with new properties of electrical conductivity and near infrared region (NIR) photothermal conversion. AT-CNTs could reinforce the mechanical properties of MAX-g-PNIPAM hydrogels, being up to 83 kPa for the compressive strength when the amount was 11 wt %, which was eight times than that of PNIPAM hydrogel and four times than that of MAX-g-PNIPAM hydrogel. The electroconductibility was enhanced by the increase of AT-CNTs amounts. Meanwhile, the composite hydrogel also exhibited multiple shape memory and NIR photothermal conversion properties, and water temperature was increased from 26 °C to 56 °C within 8 min under the NIR irradiation. Thus, the AT-CNTs reinforced MAX-g-PNIPAM hydrogel possessed promising multifunctional properties, which offered many potential applications in the fields of biosensors, thermal-arrest technology, and drug-controlled release.

Ionic Liquid-Mediated Homogeneous Esterification of Cinnamic Anhydride to Xylans

A new functional biopolymer was synthesized through an ionic liquid-mediated homogeneous grafting of cinnamic anhydride to xylans. The ionic liquid used was 1-allyl-3-methylimidazolium chloride (AMIMCl) ionic liquid. Xylans with degrees of substitution (DS) between 0.11 and 0.57 were accessible in a completely homogeneous system by changing catalysts (NaOH, KOH and LiOH), time, reaction temperature, and cinnamic anhydride/xylan molar ratio. The chemical structure and the thermal stability of the derivatives were characterized by Fourier transform infrared spectroscopy (FT-IR), ¹³C-NMR spectroscopy, and thermogravimetry. The thermal stability of the derivatives was reduced compared with the original xylan. Possible applications of the cinnamic anhydride-acylated xylan derivatives include wet-end papermaking, organic–inorganic composite films, and hydrogels.

Effect of carboxymethylation on rheological and drug release characteristics of Terminalia catappa gum

The carboxymethylation of galactomannans, arabinogalactans, arbinoxylan, etc is known to modify solubility, swelling index, rheological behaviour, powder characteristics, etc. Therefore, an attempt had been made to study the effect of carboxymethylation on Terminalia catappa (TC) gum. For this, modified Williamson synthesis reaction was utilized employing Quality by Design (QbD) approach. Grafting of carboxymethyl group on Terminalia catappa was confirmed by ATR-FTIR, H¹NMR and DSC analyses. The rheological attributes revealed that the carboxymethylation of TC lowers the viscosity, enhance thermal stability (high activation energy), disentanglement was near to re-entanglement, and weak gelling characteristic. However, the soluble fluconazole loaded gel formulation of CMTC showed diffusion based kinetic model indicating good reservoir for effective application on skin/tissue surfaces.

Anti-fatigue activity of a Lachnum polysaccharide and its carboxymethylated derivative in mice

The present study was designed to evaluate the anti-fatigue activity of an exopolysaccharide LEP-1b and its carboxymethylated derivative CLEP-1b from a Lachnum sp. Carboxymethylation was confirmed through FT-IR and ¹³C NMR spectroscopies, which showed that the (-CH₂COOH) group was attached to an oxygen (O) atom of the hydroxyl group on (C-3) of LEP-1b. Each treatment group LEP-1b and CLEP-1b at doses (50, 100, 200mg/kg, respectively) ameliorated physical fatigue and extended exhaustive swimming time in mice. Results of the fatigue related biochemical markers showed that LEP-1b and CLEP-1b at doses (50, 100, 200mg/kg, respectively) increased the content of hepatic glycogen and decreased the level of serum urea nitrogen and lactic acid. Additionally, LEP-1b and CLEP-1b enhanced the antioxidant enzymes' activities and reduced the lipid peroxidation. Moreover, results revealed that CLEP-1b had higher anti-fatigue activity than LEP-1b at same doses but without statistical significance, especially CLEP-1b (200mg/kg) had strong anti-fatigue effects. Therefore, LEP-1b and CLEP-1b can potentially be exploited as a kind of healthcare compound to combat fatigue and to boost physical strength.

Synthesis and Characterization of Periodate-Oxidized Polysaccharides: Dialdehyde Xylan (DAX)

The cleavage of the C2-C3 bond in the building units of 1 → 4-linked polysaccharides by periodate formally results in two aldehyde units, which are present in several masked forms. The structural elucidation of such polysaccharide dialdehydes remains a big challenge. Since polysaccharide derivatives are increasingly applied in materials technology, unveiling the exact structure is of utmost importance. To address this issue for xylan, dialdehyde xylan (DAX, oxidation degree of 91.5%) has been synthesized as water-soluble polymer. The ATR-FTIR spectrum of DAX showed free aldehyde to be absent and exhibited a characteristic absorption at 858 cm(-1) related to hemiacetal groups. By a combination of 1D and 2D NMR techniques, it was confirmed that oxidized xylan is present as poly(2,6-dihydroxy-3-methoxy-5-methyl-3,5-diyl-1,4-dioxane). Based on GPC analysis, the DAX polymer shows a slightly lower molar mass (6.6 kDa) compared to the starting material (7.7 kDa) right after oxidation, and degraded further after one month of storage in 0.1 M NaCl solution (4.3 kDa). The oxidized xylan demonstrated lower thermal stability upon TGA analysis and a greater amount of residual char (20.6%) compared to the unmodified xylan (13.7%).