Identification of new rubber-degrading bacterial strains from aged latex

Investigation of potential rubber-degrading bacteria and genes involved

COVID-19 pandemic has generated high demand for natural rubber gloves (NR) leading to crucial issues of rubber waste and waste management such as burning, dumping, stockpiling, discarding waste in landfills. Hence, rubber biodegradation by microorganisms is an alternative solution to the problem. The biodegradation method is environmentally friendly but normally extremely slow. Numerous microorganisms can degrade NR as a source of carbon and energy. In this study, Rhodococcus pyridinivorans KU1 was isolated from the consortium CK from previous study. The 40% rubber weight loss was detected after incubated for 2 months. The bacterial colonization and cavities on the surface of rubber were identified using a scanning electron microscope (SEM). The result demonstrated the critical degradation of the rubber surface, indicating that bacteria can degrade rubber and use it as their sole carbon source. The result of whole-genome sequencing (WGS) revealed a gene that is 99.9% identical to lcp which is responsible for poly (cis-1,4-isoprene) degradation. The results from Meta16S rRNA sequencing showed that the microbial communities were slightly shifted during the 2-month degradation, depending on the presence of monomers or oligomers appeared during the degradation process. The majority of species were soil bacteria such as phylum Proteobacteria, Actinobacteria, and Firmicutes. Members of Pseudoxanthomonas seemed to be the dominant degraders throughout the degradation.

4R of rubber waste management: current and outlook

Excessive accumulation of rubber waste necessitates the need to revisit the effectiveness of the existing rubber waste management system. This review provides an overview of the legislative frameworks, techniques, challenges, and trends of rubber waste management in various countries. The 4R (reduce, reuse, recycle and recover) framework applied in waste management system in some countries appears to be viable for the processing of rubber waste. Certain countries especially some of the European Union (EU) members have implemented extended producer responsibility (EPR) system to manage the collection of rubber waste, particularly used tires. The processing of rubber waste in each level of the 4R hierarchy was then discussed, with detailed elaboration on the most practiced 'R', recycling which encompasses the direct recycling of products, as well as material recycling via physical and/or chemical means. The challenges faced in the implementation of rubber waste management system in different countries were highlighted and recommendations for a more sustainable rubber consumption were provided at the end of this review.

Gordonia sp. BSTG01 isolated from Hevea brasiliensis plantation efficiently degrades polyisoprene (rubber)

Polyisoprene is the principal constituent of rubber latex which has been estimated globally as one of the major solid wastes. Bacterial bioremediation of this solid waste remains a major point of interest for scientists. This study reports a Gram-positive, non-motile, non-spore-forming actinomycete Gordonia sp. BSTG01, isolated from the bark of Hevea brasiliensis of a rubber plantation garden can considerably degrade natural rubber (NR) and synthetic polyisoprene rubber (SR). Scanning electron microscopy showed adhesive colonization of strain BSTG01 on both natural and synthetic rubber surface, conflating into the rubber and forming a biofilm. Rubber-dependent growth of the strain was examined by the decrease of rubber mass and increase of its total protein content in a time-dependent manner. Degradation was also verified by Schiff's reagent which confirms the appearance of aldehydes in the culture media. Fourier transform infrared spectroscopy including the attenuated total reflectance with the NR and SR pieces overgrown by the isolate revealed variations of the overall chemicals arising on the polyisoprene backbone due to the degradation of rubber by the strain BSTG01. Isolate BSTG01 (MTCC 13159) is a strain of Gordonia and this is the first strain isolated from unexplored rubber plantation area with considerable rubber degradation properties.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-03063-5.

Rubber Degrading Strains: Microtetraspora and Dactylosporangium

Rubber composed of highly unsaturated hydrocarbons, modified through addition of chemicals and vulcanization are widely used to date. However, the usage of rubber, faces many obstacles. These elastomeric materials are difficult to be re-used and recovered, leading to high post-consumer waste and vast environmental problems. Tyres, the major rubber waste source can take up to 80 years to naturally degrade. Experiments show that the latex clearing proteins (Lcp) found in Actinobacteria were reportedly critical for the initial oxidative cleavage of poly(cis-1,4-isoprene), the major polymeric unit of rubber. Although, more than 100 rubber degrading strains have been reported, only 8 Lcp proteins isolated from Nocardia (3), Gordonia (2), Streptomyces (1), Rhodococcus (1), and Solimonas (1) have been purified and biochemically characterized. Previous studies on rubber degrading strains and Lcp enzymes, implied that they are distinct. Following this, we aim to discover additional rubber degrading strains by randomly screening 940 Actinobacterial strains isolated from various locations in Sarawak on natural rubber (NR) latex agar. A total of 18 strains from 5 genera produced clearing zones on NR latex agar, and genes encoding Lcp were identified. We report here lcp genes from Microtetraspora sp. AC03309 (lcp1 and lcp2) and Dactylosporangium sp. AC04546 (lcp1, lcp2, lcp3), together with the predicted genes related to rubber degradation. In silico analysis suggested that Microtetraspora sp. AC03309 is a distinct species closely related to Microtetraspora glauca while Dactylosporangium sp. AC04546 is a species closely related to Dactylosporangium sucinum. Genome-based characterization allowed the establishment of the strains taxonomic position and provided insights into their metabolic potential especially in biodegradation of rubber. Morphological changes and the spectrophotometric detection of aldehyde and keto groups indicated the degradation of the original material in rubber samples incubated with the strains. This confirms the strains' ability to utilize different rubber materials (fresh latex, NR product and vulcanized rubber) as the sole carbon source. Both strains exhibited different levels of biodegradation ability. Findings on tyre utilization capability by Dactylosporangium sp. AC04546 is of interest. The final aim is to find sustainable rubber treatment methods to treat rubber wastes.

Bacterial and enzymatic degradation of poly(cis-1,4-isoprene) rubber: Novel biotechnological applications

Poly(cis-1,4-isoprene) rubber is a highly demanded elastomeric material mainly used for the manufacturing of tires. The end-cycle of rubber-made products is creating serious environmental concern and, therefore, different recycling processes have been proposed. However, the current physical-chemical processes include the use of hazardous chemical solvents, large amounts of energy, and possibly generations of unhealthy micro-plastics. Under this scenario, eco-friendly alternatives are needed and biotechnological rubber treatments are demonstrating huge potential. The cleavage mechanisms and the biochemical pathways for the uptake of poly(cis-1,4-isoprene) rubber have been extensively reported. Likewise, novel bacterial strains able to degrade the polymer have been studied and the involved structural and functional enzymes have been analyzed. Considering the fundamentals, biotechnological approaches have been proposed considering process optimization, cost-effective methods and larger-scale experiments in the search for practical and realistic applications. In this work, the latest research in the rubber biodegradation field is shown and discussed, aiming to analyze the combination of detoxification, devulcanization and polymer-cleavage mechanisms to achieve better degradation yields. The modified superficial structure of rubber materials after biological treatments might be an interesting way to reuse old rubber for re-vulcanization or to find new materials.

Solimonas fluminis has an active latex-clearing protein

The utilization of rubber (poly (cis-1,4-isoprene)) by rubber-degrading bacteria depends on the synthesis of rubber oxygenases that cleave the polymer extracellularly to low molecular weight products that can be taken up and used as a carbon source. All so far described Gram-negative rubber-degrading species use two related ≈ 70 kDa rubber oxygenases (RoxA and RoxB) for the primary attack of rubber while all described Gram-positive rubber-degrading strains use RoxA/RoxB-unrelated latex-clearing proteins (Lcps, ≈ 40 kDa) as rubber oxygenase(s). In this study, we identified an lcp orthologue in a Gram-negative species (Solimonas fluminis). We cloned and heterologously expressed the lcp gene of S. fluminis HR-BB, purified the corresponding Lcp protein (Lcp_HR-BB) from recombinant Escherichia coli, and biochemically characterised the Lcp_HR-BB activity. Lcp_HR-BB cleaved polyisoprene to a mixture of C₂₀ and higher oligoisoprenoids at a specific activity of 1.5 U/mg. Furthermore, spectroscopic investigation identified Lcp_HR-BB as a b-haem-containing protein with an oxidised, fivefold coordinated (open) haem centre. To the best of our knowledge, this is the first report that Gram-negative bacteria can have an active rubber oxygenase of the Lcp type.

Rubber oxygenases

Natural rubber (NR), poly(cis-1,4-isoprene), is used in an industrial scale for more than 100 years. Most of the NR-derived materials are released to the environment as waste or by abrasion of small particles from our tires. Furthermore, compounds with isoprene units in their molecular structures are part of many biomolecules such as terpenoids and carotenoids. Therefore, it is not surprising that NR-degrading bacteria are widespread in nature. NR has one carbon-carbon double bond per isoprene unit and this functional group is the primary target of NR-cleaving enzymes, so-called rubber oxygenases. Rubber oxygenases are secreted by rubber-degrading bacteria to initiate the break-down of the polymer and to use the generated cleavage products as a carbon source. Three main types of rubber oxygenases have been described so far. One is rubber oxygenase RoxA that was first isolated from Xanthomonas sp. 35Y but was later also identified in other Gram-negative rubber-degrading species. The second type of rubber oxygenase is the latex clearing protein (Lcp) that has been regularly found in Gram-positive rubber degraders. Recently, a third type of rubber oxygenase (RoxB) with distant relationship to RoxAs was identified in Gram-negative bacteria. All rubber oxygenases described so far are haem-containing enzymes and oxidatively cleave polyisoprene to low molecular weight oligoisoprenoids with terminal CHO and CO-CH3 functions between a variable number of intact isoprene units, depending on the type of rubber oxygenase. This contribution summarises the properties of RoxAs, RoxBs and Lcps.

Rhizobacter gummiphilus NS21 has two rubber oxygenases (RoxA and RoxB) acting synergistically in rubber utilisation

Biodegradation of poly(cis-1,4-isoprene) (rubber) by Gram-negative bacteria has been investigated on the enzymatic level only in Steroidobacter cummioxidans 35Y (previously Xanthomonas sp. 35Y). This species produces two kinds of rubber oxygenases, RoxA_35Y and RoxB_35Y, one of which (RoxB_35Y) cleaves polyisoprene to a mixture of C₂₀- and higher oligoisoprenoids while the other (RoxA_35Y) cleaves polyisoprene and RoxB_35Y-derived oligoisoprenoids to the C₁₅-oligoisoprenoid 12-oxo-4,8-dimethyltrideca-4,8-diene-1-al (ODTD). ODTD can be taken up by S. cummioxidans and used as a carbon source. Gram-positive rubber-degrading bacteria employ another type of rubber oxygenase, latex clearing protein (Lcp), for the initial oxidative attack of the polyisoprene molecule. In this contribution, we examined which type of rubber oxygenase is present in the only other well-documented Gram-negative rubber-degrading species, Rhizobacter gummiphilus NS21. No homologue for an Lcp protein but homologues for a putative RoxA and a RoxB protein (the latter identical to a previously postulated LatA-denominated rubber cleaving enzyme) were identified in the genome of strain NS21. The roxA_NS21 and roxB_NS21 genes were separately expressed in a ∆roxA_35Y/∆roxB_35Y background of S. cummioxidans 35Y and restored the ability of the mutant to produce oligoisoprenoids. The RoxA_NS21 and RoxB_NS21 proteins were each purified and biochemically characterised. The results-in combination with in silico analysis of databases-indicate that Gram-negative rubber-degrading bacteria generally utilise two synergistically acting rubber oxygenases (RoxA/RoxB) for efficient cleavage of polyisoprene to ODTD.

Identification of three homologous latex-clearing protein (lcp) genes from the genome of Streptomyces sp. strain CFMR 7

Rubber materials have greatly contributed to human civilization. However, being a polymeric material does not decompose easily, it has caused huge environmental problems. On the other hand, only few bacteria are known to degrade rubber, with studies pertaining them being intensively focusing on the mechanism involved in microbial rubber degradation. The Streptomyces sp. strain CFMR 7, which was previously confirmed to possess rubber-degrading ability, was subjected to whole genome sequencing using the single molecule sequencing technology of the PacBio® RS II system. The genome was further analyzed and compared with previously reported rubber-degrading bacteria in order to identify the potential genes involved in rubber degradation. This led to the interesting discovery of three homologues of latex-clearing protein (Lcp) on the chromosome of this strain, which are probably responsible for rubber degrading activities. Genes encoding oxidoreductase α-subunit (oxiA) and oxidoreductase β-subunit (oxiB) were also found downstream of two lcp genes which are located adjacent to each other. In silico analysis reveals genes that have been identified to be involved in the microbial degradation of rubber in the Streptomyces sp. strain CFMR 7. This is the first whole genome sequence of a clear-zone-forming natural rubber- degrading Streptomyces sp., which harbours three Lcp homologous genes with the presence of oxiA and oxiB genes compared to the previously reported Gordonia polyisoprenivorans strain VH2 (with two Lcp homologous genes) and Nocardia nova SH22a (with only one Lcp gene).

Structural and Functional Analysis of Latex Clearing Protein (Lcp) Provides Insight into the Enzymatic Cleavage of Rubber

Latex clearing proteins (Lcps) are rubber oxygenases that catalyse the extracellular cleavage of poly (cis-1,4-isoprene) by Gram-positive rubber degrading bacteria. Lcp of Streptomyces sp. K30 (LcpK30) is a b-type cytochrome and acts as an endo-type dioxygenase producing C20 and higher oligo-isoprenoids that differ in the number of isoprene units but have the same terminal functions, CHO-CH2- and -CH2-COCH3. Our analysis of the LcpK30 structure revealed a 3/3 globin fold with additional domains at the N- and C-termini and similarities to globin-coupled sensor proteins. The haem group of LcpK30 is ligated to the polypeptide by a proximal histidine (His198) and by a lysine residue (Lys167) as the distal axial ligand. The comparison of LcpK30 structures in a closed and in an open state as well as spectroscopic and biochemical analysis of wild type and LcpK30 muteins provided insights into the action of the enzyme during catalysis.

Characterization and functional expression of a rubber degradation gene of a Nocardia degrader from a rubber-processing factory

A rubber-degrading bacterial consortium named H2DA was obtained from an enrichment culture with natural rubber latex and rubber-processing factory waste in Vietnam. Gel permeation chromatography analysis revealed that only the strain NVL3 degraded synthetic poly(cis-1,4-isoprene) into low-molecular-weight intermediates among the three strains found in the H2DA. The 16S-rRNA gene sequence of NVL3 showed the highest identity with that of Nocardia farcinica DSM 43665^T. NVL3 accumulated aldehyde intermediates from synthetic poly(cis-1,4-isoprene) on a rubber-overlay plate as indicated by Schiff's staining. NVL3 also degraded deproteinized natural rubber into low-molecular-weight aldehyde intermediates. A latex-clearing protein (lcp) gene ortholog was identified within the genome sequence of NVL3, and it showed a moderate amino-acid identity (54-75%) with the lcp genes from previously reported rubber degraders. The heterologous expression of the NVL3 lcp in Escherichia coli BL21(DE3) allowed us to purify the 46.8-kDa His-tagged lcp gene product (His-Lcp). His-Lcp degraded synthetic poly(cis-1,4-isoprene) and accumulated aldehyde intermediates from deproteinized natural rubber suggesting the functional expression of the lcp gene from a Nocardia degrader in E. coli. Quantitative reverse transcription PCR analysis indicated the strong transcriptional induction of the lcp gene in NVL3 in the presence of synthetic poly(cis-1,4-isoprene). These results suggest the involvement of the lcp gene in rubber degradation in NVL3.

Biochemical and spectroscopic characterization of purified Latex Clearing Protein (Lcp) from newly isolated rubber degrading Rhodococcus rhodochrous strain RPK1 reveals novel properties of Lcp

Background

Biodegradation of rubber (polyisoprene) is initiated by oxidative cleavage of the polyisoprene backbone and is performed either by an extracellular rubber oxygenase (RoxA) from Gram-negative rubber degrading bacteria or by a latex clearing protein (Lcp) secreted by Gram-positive rubber degrading bacteria. Only little is known on the biochemistry of polyisoprene cleavage by Lcp and on the types and functions of the involved cofactors.

Results

A rubber-degrading bacterium was isolated from the effluent of a rubber-processing factory and was taxonomically identified as a Rhodococcus rhodochrous species. A gene of R. rhodochrous RPK1 that coded for a polyisoprene-cleaving latex clearing protein (lcp_Rr) was identified, cloned, expressed in Escherichia coli and purified. Purified Lcp_Rr had a specific activity of 3.1 U/mg at 30 °C and degraded poly(1,4-cis-isoprene) to a mixture of oligoisoprene molecules with terminal keto and aldehyde groups. The pH optimum of Lcp_Rr was higher (pH 8) than for other rubber-cleaving enzymes (≈ pH 7). UVvis spectroscopic analysis of Lcp_Rr revealed a cytochrome-specific absorption spectrum with an additional feature at long wavelengths that has not been observed for any other rubber-cleaving enzyme. The presence of one b-type haem in Lcp_Rr as a co-factor was confirmed by (i) metal analysis, (ii) solvent extraction, (iii) bipyridyl assay and (iv) detection of haem-b specific m/z values via mass-spectrometry.

Conclusions

Our data point to substantial differences in the active sites of Lcp proteins obtained from different rubber degrading bacteria.

Electronic supplementary material

The online version of this article (doi:10.1186/s12866-016-0703-x) contains supplementary material, which is available to authorized users.

Complete genome sequence of Streptomyces sp. strain CFMR 7, a natural rubber degrading actinomycete isolated from Penang, Malaysia

Streptomyces sp. strain CFMR 7, which naturally degrades rubber, was isolated from a rubber plantation. Whole genome sequencing and assembly resulted in 2 contigs with total genome size of 8.248 Mb. Two latex clearing protein (lcp) genes which are responsible for rubber degrading activities were identified.

Latex Clearing Protein (Lcp) of Streptomyces sp. Strain K30 Is a b-Type Cytochrome and Differs from Rubber Oxygenase A (RoxA) in Its Biophysical Properties

Specific polyisoprene-cleaving activities of 1.5 U/mg and 4.6 U/mg were determined for purified Strep-tagged latex clearing protein (Lcp) of Streptomyces sp. strain K30 at 23 °C and 37 °C, respectively. Metal analysis revealed the presence of approximately one atom of iron per Lcp molecule. Copper, which had been identified in Lcp1VH2 of Gordonia polyisoprenivorans previously, was below the detection limit in LcpK30. Heme was identified as a cofactor in purified LcpK30 by (i) detection of characteristic α-, β-, and γ (Soret)-bands at 562 nm, 532 nm, and 430 nm in the visible spectrum after chemical reduction, (ii) detection of an acetone-extractable porphyrin molecule, (iii) determination of a heme b-type-specific absorption maximum (556 nm) after chemical conversion of the heme group to a bipyridyl-heme complex, and (iv) detection of a b-heme-specific m/z value of 616.2 via mass spectrometry. Spectroscopic analysis showed that purified Lcp as isolated contains an oxidized heme-Fe(3+) that is free of bound dioxygen. This is in contrast to the rubber oxygenase RoxA, a c-type heme-containing polyisoprene-cleaving enzyme present in Gram-negative rubber degraders, in which the covalently bound heme firmly binds a dioxygen molecule. LcpK30 also differed from RoxA in the lengths of the rubber degradation cleavage products and in having a higher melting point of 61.5 °C (RoxA, 54.3 °C). In summary, RoxA and Lcp both are equipped with a heme cofactor and catalyze an oxidative C-C cleavage reaction but differ in the heme subgroup type and in several biochemical and biophysical properties. These findings suggest differences in the catalytic reaction mechanisms.