Water-soluble polyelectrolyte complexes that extinguish fire on cotton fabric when deposited as pH-cured nanocoating

Bio-based flame retardant coatings for polyester/cotton fabrics with high physical properties using ammonium vinyl phosphonate-grafted chitosan complexes

Polyester/cotton (T/C) blended fabrics are widely utilized in textile due to the dimensional stability and high elasticity provided by polyester, combined with the comfort and moisture absorption offered by cotton. However, simultaneously enhancing the flame retardancy and maintaining the physical properties of T/C blended fabrics for clothing and furniture applications remains a big challenge. This study introduces a bio-based flame-retardant coating using polyelectrolyte complexes (PEC) composed of ammonium vinyl phosphonate-grafted chitosan (AMVP-g-CS). The protonation degree of the PEC coating is controlled by adjusting the pH to solidify and stabilize the complex structure, preparing bio-based PEC flame retardant T/C blended fabric. Flame retardant analysis reveals that the coated fabrics achieved a limiting oxygen index of 30.5 % and a char length of 11 mm, indicating significantly improved flame retardancy. The combustible volatile substances are significantly reduced for the coated fabrics, achieving a gas-phase flame retardant effect, and forming an expansive char layer with thermal insulation and oxygen blocking properties. Importantly, physical analysis proves that the PEC deposition improved mechanical properties, satisfactory whiteness index and hand feeling of the fabrics. This work opens up a pragmatic and industrially feasible strategy for the development of CSs in the field of flame retardant coating.

An eco-friendly, highly efficient, and transparent coating derived from guar gum and citric acid for flame retardant treatment of cotton fabrics

A highly efficient, bio-ecofriendly, and transparent flame retardant (FR) for cotton fabric was developed and deposited onto the cellulose skeletal structure of cotton fabric through a one-pot sol-gel process. The flame retardant functional coating is composed of ammonium polyphosphate (APP), guar gum (GG), citric acid (CA), and a negligible amount of catalyst. Cotton fabrics were impregnated with different concentrations of ammonium polyphosphate and guar gum, with citric acid as a crosslinking agent. The overall crosslinking and grafting process was proven by FTIR and XPS. Based on the results, the designed coating exhibits over 90 % transmittance in the visible region. A 15 g/m2 flame-retardant coating induces excellent flame retardant efficiency at ultra-low flame-retardant concentrations of less than 6.25 wt%. Only a 5.25 wt% flame retardant concentration demonstrated condensed phase action, which resulted in 58.5 % and 73.6 % reductions in the pHRR and THR, respectively. Moreover, the limiting oxygen index (LOI) value showed a 74 % increase. The mechanical performance of FR coated cotton fibers was slightly reduced.

Flame resistant cotton lines generated by synergistic epistasis in a MAGIC population

Textiles made from cotton fibers are flammable and thus often include flame retardant additives for consumer safety. Transgressive segregation in multi-parent populations facilitates new combinations of alleles of genes and can result in traits that are superior to those of any of the parents. A screen of 257 recombinant inbred lines from a multi-parent advanced generation intercross (MAGIC) population for naturally enhance flame retardance (FR) was conducted. All eleven parents, like all conventional white fiber cotton cultivars produce flammable fabric. MAGIC recombinant inbred lines (RILs) that produced fibers with significantly lower heat release capacities (HRC) as measured by microscale combustion calorimetry (MCC) were identified and the stability of the phenotypes of the outliers were confirmed when the RILs were grown at an additional location. Of the textiles fabricated from the five superior RILs, four exhibited the novel characteristic of inherent flame resistance. When exposed to open flame by standard 45° incline flammability testing, these four fabrics self-extinguished. To determine the genetic architecture of this novel trait, linkage, epistatic and multi-locus genome wide association studies (GWAS) were conducted with 473k SNPs identified by whole genome sequencing (WGS). Transcriptomes of developing fiber cells from select RILs were sequenced (RNAseq). Together, these data provide insight into the genetic mechanism of the unexpected emergence of flame-resistant cotton by transgressive segregation in a breeding program. The incorporation of this trait into global cotton germplasm by breeding has the potential to greatly reduce the costs and impacts of flame-retardant chemicals.

Polyelectrolyte Complex with Controllable Viscosity by Doping Cu2+ Protects Nylon-Cotton Fabric against Fire

Nylon-cotton (NC) blend fabrics are widely used in military and industrial applications, but their high flammability still remains a serious problem. In an effort to effectively and quickly impart flame retardancy to the NC fabric, it was treated by simply blade coating with a Cu²⁺-doped polyelectrolyte complex (CPEC) that consists of ammonium polyphosphate (APP), polyethylenimine (PEI), and copper sulfate. The viscosity of the CPEC can be adjusted by altering the content of CuSO₄, which controls the amount of extrinsic and intrinsic ion pairs. By adjusting the proportion and content of PEI, APP, and CuSO₄, CPEC suitable for treating the NC fabric was obtained. Only 0.067 wt % Cu²⁺ was needed to adjust the viscosity and impart self-extinguishing behavior in a vertical burning test. This simple two-step treatment provides a promising technology to protect flammable polymeric substrates with ultralow metal-doped polyelectrolyte complexes.

Advanced Flame-Retardant Methods for Polymeric Materials

Most organic polymeric materials have high flammability, for which the large amounts of smoke, toxic gases, heat, and melt drips produced during their burning cause immeasurable damages to human life and property every year. Despite some desirable results having been achieved by conventional flame-retardant methods, their application is encountering more and more difficulties with the ever-increasing high flame-retardant requirements such as high flame-retardant efficiency, great persistence, low release of heat, smoke, and toxic gases, and more importantly not deteriorating or even enhancing the overall properties of polymers. Under such condition, some advanced flame-retardant methods have been developed in the past years based on "all-in-one" intumescence, nanotechnology, in situ reinforcement, intrinsic char formation, plasma treatment, biomimetic coatings, etc., which have provided potential solutions to the dilemma of conventional flame-retardant methods. This review briefly outlines the development, application, and problems of conventional flame-retardant methods, including bulk-additive, bulk-copolymerization, and surface treatment, and focuses on the raise, development, and potential application of advanced flame-retardant methods. The future development of flame-retardant methods is further discussed.

Clay-Filled Polyelectrolyte Complex Nanocoating for Flame-Retardant Polyurethane Foam

Polyurethane foam (PUF) is a highly flammable material typically used for cushioning in furniture and automobiles. A polyelectrolyte complex coating containing polyethylenimine, ammonium polyphosphate, and halloysite clay was applied to PUF using a two-step deposition process in an attempt to reduce its flammability. Electron microscopy confirms that this conformal thin film preserves the porous morphology of the foam and adds 20% to the foam's weight. Directly exposing coated foam to a butane torch flame yields a 73% residue after burning while keeping the internal structure of the foam intact. Cone calorimetry reveals a 52.5% reduction in the peak heat release rate (pkHRR) of the clay-based coating compared to that of the uncoated foam. This significant reduction in pkHRR and preservation of the porous structure of the foam highlights the utility of this easy-to-deposit, environmentally benign treatment to reduce the foam's flammability.

Chitosan-based flame retardant coatings for polyamide 66 textiles: One-pot deposition versus layer-by-layer assembly

Chitosan (CS) and phosphorylated chitosan (PCS) were deposited onto the polyamide 66 (PA66) fabric surfaces along with poly-acrylate sodium (PAS) via 'one pot' and layer by layer (LbL) assembly methods in preparing flame retardant coatings. Subsequently, to stabilize the deposited coatings, some of the fabric samples were treated under the UV-irradiation and additionally, a thermal treatment was also carried out for the remaining fabric samples. The LbL assembled fabrics showed a better homogeneity in the coating structure over the one pot deposited fabrics as appeared in scanning electron microscopy (SEM). Nonetheless, the LbL treated fabric sample (i.e., PA66-10BL-UV) with a higher weight gain% exhibited a greater improvement in limiting oxygen index (LOI) (i.e., 23%), and a reduced peak heat release rate (pHRR) (i.e., 25%). Yet more, only the LbL assembled and thermally cross-linked fabric sample could able to retain the flame retardant behavior in the vertical burning test even after 5 washing cycles.

Polyelectrolyte Coacervates Deposited as High Gas Barrier Thin Films

Multilayer coatings consisting of oppositely charged polyelectrolytes have proven to be extraordinarily effective oxygen barriers but require many processing steps to fabricate. In an effort to prepare high oxygen barrier thin films more quickly, a polyelectrolyte complex coacervate composed of polyethylenimine and polyacrylic acid is prepared. The coacervate fluid is applied as a thin film using a rod coating process. With humidity and thermal post-treatment, a 2 µm thin film reduces the oxygen transmission rate of 0.127 mm poly(ethylene terephthalate) by two orders of magnitude, rivalling conventional oxygen barrier technologies. These films are fabricated in ambient conditions using low-cost, water-based solutions, providing a tremendous opportunity for single-step deposition of polymeric high barrier thin films.

A wash-durable polyelectrolyte complex that extinguishes flames on polyester–cotton fabric

Polyester–cotton (PECO) blends were rendered flame retardant by depositing a stable polyelectrolyte complex as a wash-durable coating.

Few durable layers suppress cotton combustion due to the joint combination of layer by layer assembly and UV-curing

In the last five years, Layer by Layer (LbL) assembly has proven to be one of the most innovative solutions for conferring flame retardancy to fabrics.