Hydrolytic and enzymatic degradation of flexible polymer networks comprising fatty acid derivatives

Elastomer–Hydrogel Systems: From Bio-Inspired Interfaces to Medical Applications

Novel advanced biomaterials have recently gained great attention, especially in minimally invasive surgical techniques. By applying sophisticated design and engineering methods, various elastomer–hydrogel systems (EHS) with outstanding performance have been developed in the last decades. These systems composed of elastomers and hydrogels are very attractive due to their high biocompatibility, injectability, controlled porosity and often antimicrobial properties. Moreover, their elastomeric properties and bioadhesiveness are making them suitable for soft tissue engineering. Herein, we present the advances in the current state-of-the-art design principles and strategies for strong interface formation inspired by nature (bio-inspiration), the diverse properties and applications of elastomer–hydrogel systems in different medical fields, in particular, in tissue engineering. The functionalities of these systems, including adhesive properties, injectability, antimicrobial properties and degradability, applicable to tissue engineering will be discussed in a context of future efforts towards the development of advanced biomaterials.

Production of Biodegradable Palm Oil-Based Polyurethane as Potential Biomaterial for Biomedical Applications

Being biodegradable and biocompatible are crucial characteristics for biomaterial used for medical and biomedical applications. Vegetable oil-based polyols are known to contribute both the biodegradability and biocompatibility of polyurethanes; however, petrochemical-based polyols were often incorporated to improve the thermal and mechanical properties of polyurethane. In this work, palm oil-based polyester polyol (PPP) derived from epoxidized palm olein and glutaric acid was reacted with isophorone diisocyanate to produce an aliphatic polyurethane, without the incorporation of any commercial petrochemical-based polyol. The effects of water content and isocyanate index were investigated. The polyurethanes produced consisted of > 90% porosity with interconnected micropores and macropores (37-1700 µm) and PU 1.0 possessed tensile strength and compression stress of 111 kPa and 64 kPa. The polyurethanes with comparable thermal stability, yet susceptible to enzymatic degradation with 7-59% of mass loss after 4 weeks of treatment. The polyurethanes demonstrated superior water uptake (up to 450%) and did not induce significant changes in pH of the medium. The chemical changes of the polyurethanes after enzymatic degradation were evaluated by FTIR and TGA analyses. The polyurethanes showed cell viability of 53.43% and 80.37% after 1 and 10 day(s) of cytotoxicity test; and cell adhesion and proliferation in cell adhesion test. The polyurethanes produced demonstrated its potential as biomaterial for soft tissue engineering applications.

Biocompatibility of synthetic ultraviolet radiation cross-linked polymers - Subcutaneous implantation study

Photo-cross-linked polymers have attracted a lot of attention in the biomedical field. The main benefits of these materials are related to the fact that they are most of the time viscous liquids or pastes that adapt a custom and fixed shape on demand of the user. Present study deals specifically with the biological response upon subcutaneous implantation of four different materials in rabbits. In the study 20 rabbits were divided into four groups (each five rabbits): Groups 1-3 were implanted with tested new obtained by us macromonomers (P1838-DMA; P1838-UR; PDEGA-UR - respectively), while group 4 (control) was implanted with the mesh (PLA) routinely used for surgical treatment of a hernia. The new compounds were polarized earlier using ultraviolet radiation to obtain cross-linked networks. The polymers in the form of discs were then implanted subcutaneously in dorsal region of rabbits. After 28 days polymers were explanted and examined. Microscopic observation evaluated: thickness of the connective tissue capsule around the discs, cells of inflammatory response, disc surface erosion, spectroscopic analysis. The examined materials cause no chronic inflammation, abscesses or tissue necrosis, and the biological response is similar to observed in control group. Therefore, new synthetic materials could be considered as biocompatible and safe. Materials undergo slow degradation of ester bonds and surface erosion and degradation products could be eliminated probably by phagocytosis. On the basis on the afore mentioned knowledge, we formulated hypothesis, that the new polymers are well tolerated by the adjacent tissues. The aim of the following study was to examine reaction of the tissue on new types of prepolymerized material implanted subcutaneously. The obtained results suggest, that the new UV cross-linked polymers do not affect negatively on the connective tissue that is in the contact with the implants. Furthermore, the used materials are in the liquid form, thus they could be easily performed in in minimally invasive laparoscopic treatment of abdominal hernias. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1889-1897, 2019.

Enzymatic Degradation of Poly(butylene succinate) Copolyesters Synthesized with the Use of Candida antarctica Lipase B

Biodegradable polymers are an active area of investigation, particularly ones that can be produced from sustainable, biobased monomers, such as copolymers of poly(butylene succinate) (PBS). In this study, we examine the enzymatic degradation of poly(butylene succinate-dilinoleic succinate) (PBS-DLS) copolymers obtained by "green" enzymatic synthesis using lipase B from Candida antarctica (CALB). The copolymers differed in their hard to soft segments ratio, from 70:30 to 50:50 wt %. Enzymatic degradation was carried out on electrospun membranes (scaffolds) and compression-moulded films using lipase from Pseudomomas cepacia. Poly(ε-caprolactone) (PCL) was used as a reference aliphatic polyester. The degradation process was monitored gravimetrically via water uptake and mass loss. After 24 days, approx. 40% mass loss was observed for fibrous materials prepared from the PBS-DLS 70:30 copolymer, as compared to approx. 10% mass loss for PBS-DLS 50:50. Infrared spectroscopy (FTIR) and size exclusion chromatography (SEC) analysis were used to examine changes in chemical structure. Differential scanning calorimetry (DSC) and scanning light microscopy (LSM) revealed changes in degree of crystallinity, and changes in surface morphology, consistent with a surface erosion mechanism. We conclude that the obtained copolymers are suitable for tissue engineering applications thanks to tuneable degradation and lack of acidification during breakdown.