Partial bio-based poly (aryl ether ketone) derived from 2,5-furandicarboxylic acid with enhanced processability

Non-Coplanar Diphenyl Fluorene and Weakly Polarized Cyclohexyl Can Effectively Improve the Solubility and Reduce the Dielectric Constant of Poly (Aryl Ether Ketone) Resin

With the rapid development of high-frequency communication and large-scale integrated circuits, insulating dielectric materials require a low dielectric constant and dielectric loss. Poly (aryl ether ketone) resins (PAEK) have garnered considerable attention as an intriguing class of engineering thermoplastics possessing excellent chemical and thermal properties. However, the high permittivity of PAEK becomes an obstacle to its application in the field of high-frequency communication and large-scale integrated circuits. Therefore, reducing the dielectric constant and dielectric loss of PAEK while maintaining its excellent performance is critical to expanding the PAEK applications mentioned above. This study synthesized a series of poly (aryl ether ketone) resins that are low dielectric, highly thermally resistant, and soluble, containing cyclohexyl and diphenyl fluorene. The effects of cyclohexyl contents on the properties of a PAEK resin were studied systematically. The results showed that weakly-polarized cyclohexyl could reduce the molecular polarization of PAEK, resulting in low permittivity and high transmittance. The permittivity of PAEK is 2.95-3.26@10GHz, and the transmittance is 65-85%. In addition, the resin has excellent solubility and can be dissolved in NMP, DMF, DMAc, and other solvents at room temperature. Furthermore, cyclohexyl provided PAEK with excellent thermal properties, including a glass transition temperature of 239-245 °C and a 5% thermogravimetric temperature, under a nitrogen atmosphere of 469-534 °C. This makes it a promising candidate for use in high-frequency communications and large-scale integrated circuits.

Formation of Efficient Quasi-All-Polymer Solar Cells by Synergistic Effect of the Ternary Strategy and Solid Additives

All-polymer solar cells (all-PSCs) have been widely studied owing to their unique mechanical flexibility and stability. However, all-PSCs have a lower efficiency than small-molecule acceptor-based PSCs. In the work, a ternary quasi-all-polymer solar cell (Q-all-PSC) using a synergy of the ternary strategy and solid additive engineering is reported. The introduction of PC₇₁BM can not only match the energy level of the photoactive materials with an improved open circuit voltage (V_OC) of the ternary devices but also enhance photon capture, which can improve short circuit current density. It is found that there is effective charge transfer between PC₇₁BM and PY-IT, which can form an electron transport channel and promote efficient charge transport. Moreover, the introduction of PC₇₁BM made the PM6/PY-IT/PC₇₁BM ternary blends more crystalline while slightly reducing phase separation, resulting in a suitable domain size. Importantly, by introducing a high dielectric-constant PFBEK solid additive as the fasten matrix, the Q-all-PSC's efficiency can reach 16.42%. This method provides a new idea for future research on all-polymer solar cells.

Recent advances in the development of green furan ring-containing polymeric materials based on renewable plant biomass

Fossil resources are rapidly depleting, forcing researchers in various fields of chemistry and materials science to switch to the use of renewable sources and the development of corresponding technologies. In this regard, the field of sustainable materials science is experiencing an extraordinary surge of interest in recent times due to the significant advances made in the development of new polymers with desired and controllable properties. This review summarizes important scientific reports in recent times dedicated to the synthesis, construction and computational studies of novel sustainable polymeric materials containing unchanged (pseudo)aromatic furan cores in their structure. Linear polymers for thermoplastics, branched polymers for thermosets and other crosslinked materials are emerging materials to highlight. Various polymer blends and composites based on sustainable polyfurans are also considered as pathways to achieve high-value-added products.

Recent Progress on Bio-Based Polyesters Derived from 2,5-Furandicarbonxylic Acid (FDCA)

The big challenge today is the upgrading of sustainable materials to replace miscellaneous ones from petroleum resources. Thus, a generic bio-based building block lays the foundation of the huge bio-market to green economy. 2,5-Furandicarboxylic acid (FDCA), a rigid diacid derived from lignocellulose or fructose, represents a great potential as a contender to terephthalic acid (TPA). Recently, studies on the synthesis, modification, and functionalization of bio-based polyesters based on FDCA have attracted widespread attention. To apply furanic polyesters on engineering plastics, packaging materials, electronics, etc., researchers have extended the properties of basic FDCA-based homo-polyesters by directional copolymerization and composite preparation. This review covers the synthesis and performance of polyesters and composites based on FDCA with emphasis bedded on the thermomechanical, crystallization, barrier properties, and biodegradability. Finally, a summary of what has been achieved and the issues waiting to be addressed of FDCA-based polyester materials are suggested.

Study of the Effects of the Structure of Phthalazinone’s Side-Group on the Properties of the Poly(phthalazinone ether ketone)s Resins

The application of poly(phthalazinone ether ketone)s (PPEKs) resin containing phthalazinone moiety is limited, due to its poor thermoforming processability. To investigate the effects of the phthalazinone’s side-group on the thermal stability and processability of the resin, a series of PPEKs resins with different side-group (–H/–CH₃/–Ph) were prepared by nucleophilic aromatic substitution polymerization. The properties of the obtained resins were investigated by differential scanning calorimetry analysis (DSC), thermogravimetric analysis (TGA), dynamic thermomechanical analysis (DMA), and rheogoniometer. The results show that the introduction of methyl or phenyl into the PPEKs resin, significantly reduced the melting viscosity of the resin, but resulted in a slight decrease in the thermal stability of it. This might be due to the presence of methyl or phenyl, which enhanced the free volume of the molecule and reduced the entanglement between the chains; the results of the computer simulation confirmed it. Moreover, the resin films displayed excellent tensile strength with the introduction of methyl or phenyl. In a word, a novel poly(phthalazinone ether ketone)s resin with thermal resistance, easy processing and excellent mechanical properties could be obtained by introducing appropriate bulk-rigid side-groups into the phthalazinone moiety.