Relationship between morphological changes and mechanical properties in HDPE films exposed to a chlorinated environment

Aging dependent plastic bag derived-microplastics as a vector of metals in lake water

The adsorption of microplastics (MPs) for metals in aquatic environment remains poorly understood due to the use of either commercial MPs, which have different property from the MPs in environments, or artificial solutions, which have not only the significantly higher concentration of metals than natural aqueous environment but also the different natures. In this study, we elaborated the adsorption throughout the aging process of plastic bag derived-MPs (initially 1-2 mm) by potassium persulfate (K₂S₂O₈) solution to metals in lake water. Comparatively, plastic bag derived-MPs had the highest adsorption capacity for Zn²⁺ followed by Fe³⁺, Pb²⁺, Mn²⁺, Cr⁶⁺, Ni²⁺, Cu²⁺ and Cd²⁺, which is not completely consistent with the literature. Both the adsorption capacity and distribution coefficients of Cu²⁺, Ni²⁺, Zn²⁺, Mn²⁺ and Pb²⁺ had significant linear correlation with carbonyl index (p < 0.05). Although the aging overall enhanced the adsorption, the adsorption capacities of MPs might fluctuate depending on metal.

Consequences of Radiothermal Ageing on the Crystalline Morphology of Additive-Free Silane-Crosslinked Polyethylene

The radiothermal ageing of silane-crosslinked low-density PE (Si-XLPE) films was studied in the air under three different γ dose rates (8.5, 77.8, and 400 Gy·h−1) at a low temperature close to ambient (47, 47, and 21 °C, respectively). Changes in crystalline morphology were investigated using a multi-technique approach based on differential scanning calorimetry (DSC), wide- (WAXS) and small-angle X-ray scattering (SAXS), and density measurements. In particular, the changes in four structural variables were accurately monitored during radiothermal ageing: crystallinity ratio (XC), crystalline lamellae thickness (LC), long period (Lp), and interlamellar spacing (La). Concerning the changes in XC, a perfect agreement was found between DSC and WAXS experiments. Successive sequences of self-nucleation and annealing (SSA) were also performed on aged Si-XLPE samples in the DSC chamber in order to assess the thickness distribution of crystalline lamellae. This method allowed the thermally splitting of the melting domain of Si-XLPE into a series of elementary melting peaks, with each one characterised by a distinct thickness of crystalline lamellae. DSC (used with the SSA method) showed a slight increase in LC during the oxidation of Si-XLPE, while SAXS confirmed a catastrophic decrease in La. The critical value of the interlamellar spacing characterising the ductile/brittle transition of Si-XLPE was found to be of the same order of magnitude as that for linear polyethylene (LaF≈6 nm). This structural end-of-life criterion can now be used for predicting the lifetime of Si-XLPE in a nuclear environment.